On Tue, Nov 30, 2010 at 12:17 PM, John Kennedy skeb...@gmail.com wrote:
On Tue, Nov 30, 2010 at 11:59, Matt lm7...@gmail.com wrote:
Have a CentOS 4.x 32 bit server running on a single 500M SATA drive.
What is easiest way to convert too RAID 1 on it? Anyone have a link?
Would be open to
On Sun, Dec 5, 2010 at 8:13 AM, RedShift redsh...@pandora.be wrote:
On 12/05/10 12:50, Rudi Ahlers wrote:
(http://www.internetnews.com/infra/article.php/3915471/IPv4+Nearing+Final+Days.htm),
Haven't switched yet, I have IPv6 at home using sixxs.
I can't even figure out what address ranges
On Mon, Dec 6, 2010 at 6:27 AM, David Sommerseth
d...@users.sourceforge.net wrote:
On 05/12/10 14:21, Tom H wrote:
On Sun, Dec 5, 2010 at 8:13 AM, RedShift redsh...@pandora.be wrote:
On 12/05/10 12:50, Rudi Ahlers wrote:
(http://www.internetnews.com/infra/article.php/3915471/IPv4+Nearing
On Mon, Dec 6, 2010 at 6:28 PM, Bob McConnell rmcco...@lightlink.com wrote:
Ryan Wagoner wrote:
IPv6 is not broken by design. NAT was implemented to extend the time
until IPv4 exhaustion. A side effect was hiding the internal IPv4
address, which complicates a number of protocols like FTP and
Rinaldo wrote:
On Dec 6, 2010, at 5:27 AM, David Sommerseth wrote:
On 05/12/10 14:21, Tom H wrote:
On Sun, Dec 5, 2010 at 8:13 AM, RedShift redsh...@pandora.be wrote:
On 12/05/10 12:50, Rudi Ahlers wrote:
(http://www.internetnews.com/infra/article.php/3915471/IPv4+Nearing+Final+Days.htm
On Tue, Dec 7, 2010 at 6:23 AM, Mathieu Baudier mbaud...@argeo.org wrote:
b) Do I get charged by my ISP on a per-device basis?
This is no science fiction.
Some big providers in some countries limit the number of device that
can connect to internet. You have to register the MAC address
On Tue, Dec 7, 2010 at 10:29 AM, Bob McConnell rmcco...@lightlink.com wrote:
Adam Tauno Williams wrote:
On Mon, 2010-12-06 at 18:28 -0500, Bob McConnell wrote:
IPv6 is not broken by design. NAT was implemented to extend the time
until IPv4 exhaustion. A side effect was hiding the internal IPv4
On Tue, Dec 7, 2010 at 11:18 AM, Brunner, Brian T.
bbrun...@gai-tronics.com wrote:
Trim your quotes.
LOL
I was in a hurry... I think that this applies to all in this thread so
I hope that you've email everyone else...
Also, please keep your commands on-list; I only caught your email
because
On Tue, Dec 7, 2010 at 10:43 AM, Lamar Owen lo...@pari.edu wrote:
On Tuesday, December 07, 2010 10:32:32 am Tom H wrote:
Is 172.16.10.72 a private address of yours or of your ISP?
More to the point; do you have a route to his address?
I have a route to his dsl router, which, assuming
On Tue, Dec 7, 2010 at 11:51 AM, Brunner, Brian T.
bbrun...@gai-tronics.com wrote:
From: centos-boun...@centos.org
[mailto:centos-boun...@centos.org] On Behalf Of Tom H
Sent: Tuesday, December 07, 2010 11:34 AM
To: CentOS mailing list
Subject: Re: [CentOS] IPV4 is nearly depleted, are you
On Wed, Dec 8, 2010 at 10:27 AM, Adam Tauno Williams
awill...@whitemice.org wrote:
On Wed, 2010-12-08 at 15:16 +, lheck...@users.sourceforge.net wrote:
I guess the reason it jars us here is because most people post properly.
Except the gmail lusers who haven't figured out how to turn off
On Wed, Dec 8, 2010 at 11:10 AM, Les Mikesell lesmikes...@gmail.com wrote:
On 12/8/2010 4:04 AM, David Sommerseth wrote:
iptables is a de-facto standard on all Linux distributions nowadays. It
is not ratified by ISO, IETF or similar ... but how does that make the
real life scenario any
On Fri, Dec 10, 2010 at 8:43 AM, Steve Clark scl...@netwolves.com wrote:
I have a confusing problem. I have two centos 5,5 boxes. Both have
sudo.i386 1.7.2p1-9.el5_5
installed
I am using the same sudoers file, but the one on box A keeps trying to do
DNS
On Fri, Dec 10, 2010 at 2:23 PM, Steve Clark scl...@netwolves.com wrote:
On 12/10/2010 10:40 AM, Tom H wrote:
On Fri, Dec 10, 2010 at 8:43 AM, Steve Clark scl...@netwolves.com wrote:
I have a confusing problem. I have two centos 5,5 boxes. Both have
sudo.i386
On Thu, Dec 16, 2010 at 2:15 AM, Philix T A philixli...@gmail.com wrote:
2) Dont create RAID for swap and / root partition (Not Advisable)
Any rationale for this bad advice?
3) Swap Size size should be 2X the size of the Physical memory
For a desktop, maybe.
6) My experience had always
On Mon, Jan 17, 2011 at 9:23 AM, John Horne john.ho...@plymouth.ac.uk wrote:
On Mon, 2011-01-17 at 14:05 +1300, Smithies, Russell wrote:
I've just setup nic bonding on our server (DL585-G7 running Centos 5.5
x86_64) as detailed on the wiki:
On Thu, Jan 20, 2011 at 4:00 AM, Rudi Ahlers r...@softdux.com wrote:
It probably depends on his environment. If it's an office where people
actually work for money and need to address client issues then I'm
sure your colleagues won't be please if you make them loose all their
work just to be
On Thu, Jan 20, 2011 at 7:55 AM, Sorin Srbu sorin.s...@orgfarm.uu.se wrote:
-Original Message-
From: centos-boun...@centos.org [mailto:centos-boun...@centos.org] On
Behalf Of Tom H
Sent: Thursday, January 20, 2011 1:03 PM
To: CentOS mailing list
Subject: Re: [CentOS] How to disable screen
On Thu, Jan 20, 2011 at 11:11 AM, Rudi Ahlers r...@softdux.com wrote:
Sometimes you need to access a PC of a staff member who is busy with
something right now. And I'm not talking about administrative access.
Sure, I can access any PC via root login, and frankly for that matter
I can also
On Thu, Jan 20, 2011 at 9:06 AM, John Hodrien j.h.hodr...@leeds.ac.uk wrote:
On Thu, 20 Jan 2011, Tom H wrote:
Yes but someone's posted a global gconftool-2 recipe.
Run gconf-editor as root and you can edit the global mandatory rules too.
Very true, as long as you can run a GUI app as root
On Thu, Jan 20, 2011 at 11:46 AM, Lamar Owen lo...@pari.edu wrote:
On Wednesday, January 19, 2011 06:38:12 pm Scott Robbins wrote:
Boot has to be huge in Fedora for the preupgrade to have a chance of
working--having given up on it several releases ago, I have no idea if
it's been improved or
On Thu, Jan 20, 2011 at 11:52 AM, Rudi Ahlers r...@softdux.com wrote:
On Thu, Jan 20, 2011 at 6:44 PM, Tom H tomh0...@gmail.com wrote:
You clearly work in an insecure environment.
By who's definition? The fact that you're PC is connected to the
internet place you in the same environment
On Thu, Jan 20, 2011 at 12:45 PM, Giles Coochey gi...@coochey.net wrote:
And in those nine years you claim to have had at least one major security
incident.
It beggars my belief
You now publicly declare that your company not just advocates the sharing of
passwords, but certainly
On Sat, Jan 22, 2011 at 11:28 PM, Nico Kadel-Garcia nka...@gmail.com wrote:
On Sat, Jan 22, 2011 at 5:32 PM, Gordon Messmer yiny...@eburg.com wrote:
On 01/21/2011 07:41 PM, Nico Kadel-Garcia wrote:
NetworkManager is utterly useless for server grade work, such as pair
bonding and bridges. It
On Sun, Jan 23, 2011 at 9:30 AM, Nico Kadel-Garcia nka...@gmail.com wrote:
On Sun, Jan 23, 2011 at 2:46 AM, Tom H tomh0...@gmail.com wrote:
On Sat, Jan 22, 2011 at 11:28 PM, Nico Kadel-Garcia nka...@gmail.com wrote:
The key to *keeping* it off in RHEL 6, and I assume in CentOS 6
On Mon, Jan 31, 2011 at 12:18 AM, Rudi Ahlers r...@softdux.com wrote:
On Sun, Jan 30, 2011 at 11:07 PM, Soo-Hyun Choi s.c...@terabit.org.uk wrote:
As you know, $HOME is generally located at /home/$username by default.
I would like to re-locate all users' $HOME directories to something like
On Thu, Feb 3, 2011 at 3:14 PM, Rafa Grimán rafagri...@gmail.com wrote:
On Thursday 03 February 2011 20:42 Robert Heller wrote
At Thu, 3 Feb 2011 20:12:17 +0100 CentOS mailing list centos@centos.org
wrote:
Hi :)
On Thursday 03 February 2011 14:59 Giles Coochey wrote
On 03/02/2011
On Sat, Feb 12, 2011 at 8:09 AM, Christopher Chan
christopher.c...@bradbury.edu.hk wrote:
On Saturday, February 12, 2011 09:02 PM, Natxo Asenjo wrote:
Anyway, neither in windows nor in unix/linux you want to specify
permissions on a per user level. Always groups. If the user leaves the
On Wed, Feb 23, 2011 at 10:45 PM, Ross Walker rswwal...@gmail.com wrote:
Let's face it most auditors these days are just accountants with Infosys Mgmt
text books.
Or former sysadmins who didn't make it in the management track but
still wanted to be able to lord it over others...
On Wed, Mar 2, 2011 at 8:43 PM, Johnny Hughes joh...@centos.org wrote:
Do you think we are not trying or damnedest to get it done as fast as we
possibly can?
What, exactly, is the problem here?
You have my permission to use something else. Does that help?
Good answer!
:)
On Wed, Mar 9, 2011 at 11:51 AM, m.r...@5-cent.us wrote:
Peter Peltonen wrote:
On Wed, Mar 9, 2011 at 6:33 PM, m.r...@5-cent.us wrote:
Peter Peltonen wrote:
Based on that info I assume the board having a 8x SAS Ports via LSI
1068E Controller. We received the server with 3 drives + 1 spare
On Tue, Mar 15, 2011 at 7:53 AM, Rainer Traut tr...@gmx.de wrote:
Am 15.03.2011 10:37, schrieb Luigi Rosa:
It's a matter of personal taste, but I find more useful the -X (or
- --exclude-from) option
Yes, personal taste, but in crontab confusing not seeing the excludes
and besides that it
On Thu, Mar 17, 2011 at 12:03 PM, Neil Viglieno n...@viglieno.net wrote:
On Thu, 2011-03-17 at 16:34 +0100, Alain Péan wrote:
With all due respect, the release was announced to be ready last week,
and planned for the end of the week. One week later, I don't see
anything. I think having some
On Mon, Mar 21, 2011 at 10:34 AM, compdoc comp...@hotrodpc.com wrote:
RHEL and opensuse are different - defferent kernels, different config files
and slightly different locations for some config files.
It's not like one is a drop in replacement for the other, so it doesn't make
sense to me
On Mon, Mar 21, 2011 at 12:00 PM, Simon Matter simon.mat...@invoca.ch wrote:
On Mon, Mar 21, 2011 at 10:34 AM, compdoc comp...@hotrodpc.com wrote:
RHEL and opensuse are different - defferent kernels, different config
files
and slightly different locations for some config files.
It's not
On Wed, Mar 23, 2011 at 2:29 AM, Sam Trenholme
strenholme.use...@gmail.com wrote:
As an open-source developer, I understand the frustration of working
hard and having a lot of freeloaders not appreciating my work. I feel
people posting here talking about how unprofessional CentOS is acting
On Mon, Apr 4, 2011 at 10:51 AM, Russell Jones rjo...@eggycrew.com wrote:
I am having a strange issue with CentOS 5.4 that I cannot seem to solve.
Every DNS lookup results in records being requested first before A
records. As a result, this causes a large amount of unnecessary DNS
On Tue, Apr 5, 2011 at 6:52 PM, Russell Jones rjo...@eggycrew.com wrote:
Thank you!
If forcing it to stop system-wide is not possible, is there any way of
forcing IPv4 lookups to occur first then?
You're welcome.
In the case of traceroute, there shouldn't be any DNS requests
when
On Tue, Apr 5, 2011 at 7:50 PM, Stephen Harris li...@spuddy.org wrote:
On Tue, Apr 05, 2011 at 07:46:32PM -0400, Tom H wrote:
In the case of traceroute, there shouldn't be any DNS requests
when specifying ipv4 transport (-4).
Umm, no. The transport protocol is irrelevant to the query
On Wed, Apr 6, 2011 at 5:59 PM, Hendrik hendrik.stew...@hotmail.com wrote:
Or is that the Indian mentality?
I hope that you're banned for this racist comment. (And as an added
bonus, we'll be rid of someone who's making a mess of message
threading and the mail archive.)
On Thu, Apr 7, 2011 at 12:02 PM, Johnny Hughes joh...@centos.org wrote:
Good ... if you don't like CentOS, then we do not want you to use it.
For people who do like it, we do want you to use it.
What we do not want is for people to think that they have a Service
Level Agreement with CentOS
On Thu, Apr 7, 2011 at 2:05 PM, R P Herrold herr...@centos.org wrote:
On Thu, 7 Apr 2011, Tom H wrote:
This is the kind of answer that CentOS as a project
shouldn't allow (KB's recent use-something-else email is
another example) because it makes the developers look like
rank amateurs
On Thu, Apr 7, 2011 at 4:27 PM, Ljubomir Ljubojevic off...@plnet.rs wrote:
Tom H wrote:
It's the second time that I point out that the CentOS communication
policy (if you there is one) is completely unprofessional. You can let
off steam by saying we're volunteers, so we can tell you to use
On Fri, Apr 8, 2011 at 8:37 AM, Kai Schaetzl mailli...@conactive.com wrote:
STOP IT!
Take a few deep breaths!
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
On Sun, Apr 10, 2011 at 7:59 AM, Rainer Traut tr...@gmx.de wrote:
it looks like, I cannot format a partition as ext4 while install.
I thought upstream has ext4 fully supported in 5.6?
I looked in release notes but only found reference to ext4 in RHEL5.6
From
On Sun, Apr 10, 2011 at 10:40 AM, Rainer Traut tr...@gmx.de wrote:
Am 10.04.2011 15:30, schrieb Tom H:
On Sun, Apr 10, 2011 at 7:59 AM, Rainer Trauttr...@gmx.de wrote:
it looks like, I cannot format a partition as ext4 while install.
I thought upstream has ext4 fully supported in 5.6?
I
On Mon, Apr 11, 2011 at 5:30 AM, Riccardo Veraldi
riccardo.vera...@cnaf.infn.it wrote:
Hello, after updating to Cents 5.6 and so to kvm-83-224
my KVM virtual machines qemu qcow2 based images do not start anymore.
Looking at VM console the error message is that VM media is not bootable.
Hi CentOS experts,*
Short Version*
I would like to produce a weekly report in HTML for each CentOS 5.x
server we have indicating configuration compliance with some industry
benchmark. I am looking for a tool or tools to implement this, I am
happy to use 3rd party proprietary stuff if
On 02/02/12 00:04, Kwan Lowe wrote:
Next was auditing, which I think may apply to your question.
For the configurations, we are experimenting with cfengine and puppet. They
allow you to track configuration changes, reset changes, etc.. I've also
used CVS to track configuration files
On 02/02/12 00:26, Les Mikesell wrote:
Is anyone looking at salt instead of puppet yet? http://saltstack.org/
I had such a bad experience with puppet, that I ran like a jilted
teenage lover on a rebound into the arms of chef...
unfortunately I may not have reviewed all the options
On Mon, Nov 23, 2009 at 2:38 AM, Gordon McLellan gordonth...@gmail.com wrote:
The archives seem to suggest fiddling with udev to
be the answer. So I modify /etc/udev/rules.d/60-net (or something)
and add a few rules found in an ancient example (those aren't my mac
addresses):
KERNEL==eth?,
KERNEL==eth?, SYSFS{address}==00:21:e9:17:64:b5, NAME=eth1 #
Now, all three network cards get assigned as eth0! eth1 and eth2 are
no longer found. The pci-express nics (onboard) get detected first,
and the pci nic is last, so it ends up owning the eth0 alias.
Changing SYSFS to ATTR should
Digging around google a bit more I came up with different rules, and
fingers crossed, they seem to work!
SUBSYSTEM==net, SYSFS{address}==00:1b:21:4d:c3:e8, NAME=eth0 #
pro/1000gt
SUBSYSTEM==net, SYSFS{address}==00:e0:81:b5:7a:30, NAME=eth1 #
internal 1
SUBSYSTEM==net,
Digging around google a bit more I came up with different rules, and
fingers crossed, they seem to work!
SUBSYSTEM==net, SYSFS{address}==00:1b:21:4d:c3:e8, NAME=eth0
# pro/1000gt
SUBSYSTEM==net, SYSFS{address}==00:e0:81:b5:7a:30, NAME=eth1
# internal 1
SUBSYSTEM==net,
On Wed, Apr 20, 2011 at 12:06 AM, John R. Dennison j...@gerdesas.com wrote:
On Tue, Apr 19, 2011 at 11:27:16PM +0100, Ian Murray wrote:
Maybe having it said so publicly and be such a respected Linux community
member may help certain people wake up and smell the coffee.
Respected? I can't
On Wed, Apr 20, 2011 at 5:19 PM, John R. Dennison j...@gerdesas.com wrote:
On Wed, Apr 20, 2011 at 01:34:54PM -0400, Tom H wrote:
If CentOS had a communication policy, it could spare itself these
types of articles...
No. These types of articles will continue to appear whether
On Fri, May 13, 2011 at 8:50 PM, Christopher Chan
christopher.c...@bradbury.edu.hk wrote:
On Saturday, May 14, 2011 01:30 AM, Craig White wrote:
CentOS has always been a take it or leave it proposition and thus nothing
has really changed
except that many businesses have become reliant upon
On Mon, May 16, 2011 at 7:45 PM, Ljubomir Ljubojevic off...@plnet.rs wrote:
Gordon Messmer wrote:
On 05/15/2011 06:10 PM, Johnny Hughes wrote:
Where is Ubuntu telling people exactly where they stand on producing a
their new releases.
What about Red Hat ... how about Fedora.
I don't know
On Wed, May 18, 2011 at 9:01 AM, Les Mikesell lesmikes...@gmail.com wrote:
On 5/18/11 5:05 AM, Ljubomir Ljubojevic wrote:
Tom, you are way off the point I was making. RHEL, Fedora, Debian,
Ubuntu, all other distro's are *developed* and can change at any time.
That's why I said he should've
On Mon, May 30, 2011 at 9:31 PM, RILINDO FOSTER rili...@me.com wrote:
After getting a reasonably configured NFS4 setup working on my Scientific
Linux
server, I spent a majority of my evening trying to do the same with my Centos
5
box, with fruitless results. Most attempts to mount that
On Mon, May 30, 2011 at 10:53 PM, RILINDO FOSTER rili...@me.com wrote:
On May 30, 2011, at 10:29 PM, Tom H wrote:
Are the values of Domain in /etc/idmapd.conf the same on the
client and the server?
FYI: For nfsv4, there's no need to have any ports other than 111 and 2049.
(Are you using
On Thu, Jun 2, 2011 at 2:01 PM, RILINDO FOSTER rili...@me.com wrote:
On Jun 2, 2011, at 11:56 AM, Tom H wrote:
I was asking about Domain in idmapd.conf because there might be a
difference between CentOS 5 and SL 6.
It is actually commented out in SL6.
There you go. Comment it out on CentOS
On Tue, Jun 14, 2011 at 9:19 AM, m.r...@5-cent.us wrote:
Craig White wrote:
heck it's still Linux and pretty much the same.
Red Hat went far too long between releases and it is clear to me that I
can't possibly rely on CentOS for timeliness.
Timeliness, dunno. Ubuntu (or fedora) for
On Tue, Jun 14, 2011 at 5:54 PM, Ron Blizzard rb4cen...@gmail.com wrote:
On Tue, Jun 14, 2011 at 10:48 AM, m.r...@5-cent.us wrote:
Odd you should mention it - a friend on a techie mailing list just tried
to set up dual-boot XP w/ ubuntu, and had all *kinds* of grief, dunno if
she just
On Tue, Jun 14, 2011 at 11:41 AM, m.r...@5-cent.us wrote:
Yeah, but some people appear to think (or at least that was what I got
from the post of the guy I was replying to) that fedora is good enough for
production.
That was me. Using fedora isn't my choice but it's been running fine
for the
On Tue, Jun 14, 2011 at 10:25 PM, Ron Blizzard rb4cen...@gmail.com wrote:
On Tue, Jun 14, 2011 at 7:59 PM, Tom H tomh0...@gmail.com wrote:
I wouldn't generalize based on your experience because Mint hasn't
become a very popular distribution by being broken. Same goes for
Ubuntu.
I don't
On Wed, Jun 15, 2011 at 4:50 AM, Craig White craigwh...@azapple.com wrote:
Like RHEL/CentOS, Ubuntu LTS is absolutely appropriate for server use.
In fact, it's sort of refreshing to set up a new server that isn't
overloaded with bloat from the very start. Setting up a new VMWare image
w/
On Wed, Jun 15, 2011 at 5:58 AM, Ron Blizzard rb4cen...@gmail.com wrote:
Mint/Ubuntu don't have an easy way to boot into the command line.
To boot into everything but X, you can append text to the kernel
(grub1) or linux (grub2) line in the grub configuration.
On Wed, Jun 15, 2011 at 3:48 PM, Ron Blizzard rb4cen...@gmail.com wrote:
On Wed, Jun 15, 2011 at 2:37 PM, Tom H tomh0...@gmail.com wrote:
On Wed, Jun 15, 2011 at 5:58 AM, Ron Blizzard rb4cen...@gmail.com wrote:
Mint/Ubuntu don't have an easy way to boot into the command line.
To boot
On Wed, Jun 15, 2011 at 6:04 PM, Craig White craig.wh...@ttiltd.com wrote:
On Jun 15, 2011, at 12:33 PM, Tom H wrote:
On Wed, Jun 15, 2011 at 4:50 AM, Craig White craigwh...@azapple.com wrote:
Like RHEL/CentOS, Ubuntu LTS is absolutely appropriate for server use.
In fact, it's sort
On Wed, Jun 15, 2011 at 6:08 PM, Craig White craig.wh...@ttiltd.com wrote:
those days will be over soon as even fedora has now switched to upstart
CentOS 7 (based on upstream 7) will be a vastly different beast
CentOS 7 will most probably have systemd not upstart.
On Wed, Jun 15, 2011 at 4:47 PM, m.r...@5-cent.us wrote:
Or edit /etc/inittab to boot to runlevel 3, or just init 3 from the
command line (which you can reach via ctrlalt-f1) or I think you can
append 3 to the kernel line...
That doesn't work on Debian/Ubuntu because runlevels 2-5 are the
On Wed, Jun 29, 2011 at 5:14 PM, Boris Epstein borepst...@gmail.com wrote:
In short - we have two CentOS-based NFS servers. They work fine with a
variety of Linux machines but when I try to mount them from a Mac OS X
10.5 or 10.6 machine I get nowhere. I.e., the Mac does not complain
yet
On Thu, Jun 30, 2011 at 10:20 AM, Boris Epstein borepst...@gmail.com wrote:
As Tom mentioned, you need the insecure exports option on the NFS server
side, otherwise I don't do anything special on the client. I'm sourcing
the automount maps through LDAP. Try mounting via IP address rather than
On Tue, Jul 5, 2011 at 1:11 PM, Rob Kampen rkam...@kampensonline.com wrote:
Boris Epstein wrote:
Is the OS X firewall blocking nfs?
How are you mounting the export? If you're not trying it from within
Terminal, does it work from within it?
The OS X firewall dos not appear to be a factor.
On Wed, Jul 6, 2011 at 6:54 AM, Louis Lagendijk
lo...@lagendijk.xs4all.nl wrote:
On Tue, 2011-07-05 at 22:13 -0400, Tom H wrote:
On Tue, Jul 5, 2011 at 1:11 PM, Rob Kampen rkam...@kampensonline.com wrote:
Boris Epstein wrote:
Is the OS X firewall blocking nfs?
How are you mounting
On Tue, Jul 12, 2011 at 7:51 AM, Michael Schumacher
michael.schumac...@pamas.de wrote:
There is no GNOME Desktop Environment group. Check with yum
grouplist and you will see. And even installing KDE Desktop won't
help, because it is not starting automatically. And then, we don't
have
On Tue, Jul 12, 2011 at 9:31 AM, Ljubomir Ljubojevic off...@plnet.rs wrote:
Fedora 12-15 for example need more space on boot partition (500MB is I
am not mistaken) and CentOS5/Fedora6 only needed 100MB.
F12-F15 need a larger /boot for the preupgrade tool (to upgrade
from one version to the
On Thu, Jul 21, 2011 at 2:17 PM, Jamieson, Stephen CTR Navair, 5.4.4.4
stephen.jamieson@navy.mil wrote:
In CentOS5 you were able to create a server section in /etc/gdm/custom.conf
such as
[server-Standard]
name=Standard server
command=/usr/bin/Xorg -br -audit 4 -s 15
chooser=false
On Thu, Jul 21, 2011 at 4:29 PM, m.r...@5-cent.us wrote:
fred smith wrote:
On Thu, Jul 21, 2011 at 02:17:28PM -0400, Jamieson, Stephen CTR Navair,
5.4.4.4 wrote:
In CentOS5 you were able to create a server section in
/etc/gdm/custom.conf such as
In later Fedora releases, GDM has become
On Fri, Jul 22, 2011 at 10:57 AM, Jerry Geis ge...@pagestation.com wrote:
I have a line in my kickstart file (ksdevice)
# Network information
network --bootproto=dhcp --device=eth0 --onboot=on
# Default network to boot
ksdevice=eth0
# Auto reboot (to being next install faze)
reboot
On Fri, Jul 22, 2011 at 1:11 PM, Lamar Owen lo...@pari.edu wrote:
On Friday, July 22, 2011 12:22:31 PM Gerhard Schneider wrote:
Using gdm is getting harder and harder but you can try:
gconftool-2 --direct \
--config-source xml:readwrite:/etc/gconf/gconf.xml.defaults \
--type bool --set
On Fri, Jul 22, 2011 at 10:14 AM, Jamieson, Stephen CTR Navair,
5.4.4.4 stephen.jamieson@navy.mil wrote:
Those options are no longer supported in GDM. I think that they were
removed with GDM 2.24 (at the latest, probably 2.22) and C6 is running
GDM 2.30.
That is unfortunate... I suppose
On Fri, Jul 22, 2011 at 2:25 PM, Lamar Owen lo...@pari.edu wrote:
On Friday, July 22, 2011 02:10:22 PM Tom H wrote:
You can use sudo -u gdm gconftool-2
/apps/gdm/simple-greeter/disable_user_list --set --type=boolean true
because the gdm user controls the login screen but the above works
too
On Sat, Jul 23, 2011 at 3:02 PM, John R Pierce pie...@hogranch.com wrote:
On 07/23/11 10:22 AM, Kristopher Kane wrote:
this sort of thing really belongs on an iproute2/netfilter mail list,
however, as its not at all centos specific.
So John, exactly what is CentOS specific? Should I only
On Sat, Jul 23, 2011 at 3:26 PM, John R Pierce pie...@hogranch.com wrote:
On 07/23/11 12:09 PM, Tom H wrote:
Even after this explanation I don't understand your objection to
helping someone with a firewall and routing issue on a CentOS box. You
might have a point if the executables didn't
On Mon, Jul 25, 2011 at 7:41 PM, Trey Dockendorf treyd...@gmail.com wrote:
I am unable to get the #includedir function to work with sudo. This works
just fine on all my CentOS 5.6 servers, but on 6 it is being ignored. I
have this line in the file /etc/sudoers.d/zabbix-puppet
zabbix
On Wed, Jul 27, 2011 at 4:16 AM, John Hodrien j.h.hodr...@leeds.ac.uk wrote:
On Wed, 27 Jul 2011, Cliff Pratt wrote:
I trying to try out CentOS 6 in an Oracle VirtualBox running on
Ubuntu. Has anyone been able to get this configuration working?
When I try to boot the Live ISO it starts to do
On Thu, Jul 28, 2011 at 6:31 AM, Rudi Ahlers r...@softdux.com wrote:
On Thu, Jul 28, 2011 at 11:23 AM, Peter Peltonen
peter.pelto...@gmail.com wrote:
On Thu, Jul 28, 2011 at 11:56 AM, John R. Dennison j...@gerdesas.com wrote:
On Thu, Jul 28, 2011 at 10:53:23AM +0200, Juergen Gotteswinter
On Thu, Jul 28, 2011 at 7:41 AM, John R. Dennison j...@gerdesas.com wrote:
On Thu, Jul 28, 2011 at 07:27:38AM -0400, Tom H wrote:
2. A so-called Enterprise Operating System like RHEL.
And your gratuitous edit of this point serves what purpose exactly?
That blaming CentOS for the switch
On Thu, Jul 28, 2011 at 2:39 PM, John R. Dennison j...@gerdesas.com wrote:
On Thu, Jul 28, 2011 at 10:44:18AM -0400, Tom H wrote:
That blaming CentOS for the switch to KVM and the deprecation of Xen
doesn't make sense since it's simply re-rpm'ing RHEL.
Ok, that makes sense and I fully agree
On Sun, Jul 31, 2011 at 3:15 AM, Sean Hart teve...@gmail.com wrote:
Finally figured it out, took me a good part of the day but..
For some reason the device names of the raid arrays where changed md0
became md126 and md1 became md127. this all must have happened while
in fedora 15 livecd. I
On Tue, Aug 9, 2011 at 6:10 PM, Rudi Ahlers r...@softdux.com wrote:
I need to setup a real bare minimum CentOS Virtual Machine, but with
normal internet / network access. i.e. I need SSH, Mutt, Links, lynx,
ping, tracert, dig, iptables, etc.
Does anyone know where (if?) I can get a list of
On Tue, Aug 9, 2011 at 7:33 PM, Tom H tomh0...@gmail.com wrote:
On Tue, Aug 9, 2011 at 6:10 PM, Rudi Ahlers r...@softdux.com wrote:
I need to setup a real bare minimum CentOS Virtual Machine, but with
normal internet / network access. i.e. I need SSH, Mutt, Links, lynx,
ping, tracert, dig
On Tue, Aug 16, 2011 at 4:57 PM, Alfred von Campe alf...@von-campe.com wrote:
I'm just starting to test CentOS 6 in our environment, and as a first step
did a basic
install from DVD (Desktop target, all defaults). Next I will try to automate
the
installations as I did for CentOS 5 using
On Thu, Aug 18, 2011 at 12:25 PM, Eero Volotinen eero.voloti...@iki.fi wrote:
Is is possible to use kickstart file to install rhel from dvd drive?
Mainly idea is to clone one anaconda.ks file to about twenty
machines.?
examples? ftp/http/dhcp is not possible due to network limitations.
I do
On Thu, Aug 18, 2011 at 2:35 PM, Joseph L. Casale
jcas...@activenetwerx.com wrote:
Boot from the DVD/ISO, press tab at the first install screen, and
point to your ks file with ks=,,,.
Right, but that doesn't answer his question. The op does not have
ip connectivity:
On Thu, Aug 25, 2011 at 5:09 PM, m.r...@5-cent.us wrote:
Lucian wrote:
On Thu, Aug 25, 2011 at 9:25 PM, m.r...@5-cent.us wrote:
When did they change/lose their name?
I was trying to go there here at work, and the site was blocked. I put
in
a ticket, and get a response that I may have been
On Thu, Aug 25, 2011 at 6:04 PM, John R Pierce pie...@hogranch.com wrote:
On 08/25/11 2:58 PM, Craig White wrote:
some of us have moved to ubuntu/deb but I think the real reason is...
http://lists.repoforge.org/pipermail/users/2010-November/018282.html
I saw that when I was perusing the mail
On Thu, Aug 25, 2011 at 6:39 PM, R P Herrold herr...@owlriver.com wrote:
no -- it was off topic noise, not a WAG
-- speculation and randon attempts at entertainment do not
belong or matter here, any more than Roth's failure to google
and read the back archives of the proper mailing lists did
1 - 100 of 149 matches
Mail list logo