On 10/03/2015 07:47 PM, C.L. Martinez wrote:
Hi all, [...]
Are not supposed that systemd startups hosts more faster??
ts.centos.org/mailman/listinfo/centos
I think you misunderstand: systemd has a dependency management between
services, that could make the boot faster.
Speeding up the boot
On 08/25/2015 04:16 PM, Gary Stainburn wrote:
connect to UNIX socket (/var/run/clamd.exim/clamd.sock): No such file
If you try to locate that file, do you find it somewhere?
When you list services (units) and grep with clamav, do you find some?
___
On 08/25/2015 04:36 PM, Gary Stainburn wrote:
so I've edited that file to comment out the 'example' line. In here it defines
the socket as
/var/run/clamav-milter/clamav-milter.socket
However, after saving this file the service still fails to start and the
socket still doesn't exist
Does the
On 06/22/2015 01:04 PM, Rob Kampen wrote:
Hi List,
I have noted a number of times, various comments on this list about
Nagios, hence my questions.
just been employed by an ISP and they want to upgrade their fairly
extensive nagios monitoring.
Just for information, Nagios has been forked
On 06/17/2015 09:54 AM, Alessandro Baggi wrote:
Also ESX(i) is not CentOS related but is included in this post.
And what about oVirt?
MMmmm, I really thought ESX was in some way a RHEL derivative but when
reading
http://www.v-front.de/2013/08/a-myth-busted-and-faq-esxi-is-not-based.html
it
On 06/17/2015 11:10 AM, John R Pierce wrote:
regardless of all that noise, in RHEL and therefore CentOS, KVM is the
preferred and best supported hypervisor.
I dont catch your point.
The OP was wide enough in his question in order to allow that discussion.
Anyway, I'll add one point:
On 06/17/2015 04:52 PM, Lamar Owen wrote:
But to address the direct question of the OP, I use KVM for many
things, but I have older hardware in quantity on which I'll likely run
Xen4CentOS with paravirtualized guests,
Is not LXC an alternative for such situation? Simpler, fully integrated
Hi all,
My target is: CentOS 7 on a X less gateway
My internet provider provides a pppoe connection with a login and a password
On CentOS6, I used to setip it up with rp-pppoe wizzard and it works: it
sets up the needed things to make the network init script launch the
connection at boot.
I
Hi all,
I used to manage network through /etc/sysconfig/network-scripts/ifcfg-*
Most of my use case are vlans (ie: eth0.1) an aliases (ie: eth1:3)
My context in headless VMs (no DE, no Xorg, no GUI)
With CentOS7 and systemd: is it still managed with
/etc/sysconfig/network-scripts/ifcfg-* ?
On 04/21/2015 04:54 PM, Jonathan Billings wrote:
On Tue, Apr 21, 2015 at 03:46:52PM +0200, Dennis Jacobfeuerborn wrote:
Networking isn't really controlled by systemd but by NetworkManager. I
usually just yum remove NetworkManager* and then everything works just
as it did in CentOS 6.
Note:
On 03/24/2015 05:38 PM, Tim Dunphy wrote:
I'm using CentOS 7. I'll check to see if I can get php version 5.6.7
from IUS that way. But also I'm trying to get better at building
RPM's. So if anybody has any advice on how to solve this problem, I'd
appreciate anything you'd have to say!
Take
On 01/28/2015 03:32 PM, Jatin Davey wrote:
Could someone point me on how to improve the disk I/O on my server and
reduce the wait time on I/O.
Fisrt of all, you should ensure how fast are your disks.
There are several methods to check that:
Hi all,
I have a Develop ineo 25e printer, and want to set it up with CUPS.
I connect to http://localhost:631/ and add the printer, with uploading
the PPD available here:
http://www.develop.eu/en/products/office-products/colour/ineo-25/downloads.html
(English, Linux, version 1.1 dated 2012)
On 12/02/2014 10:29 AM, Hadi Motamedi wrote:
Dear All
I want to put my stuff on centos 6.3 but some colleagues warned that
it is not wise to use it at now for some bugs reported. Can you please
confirm if this is true and which vulnerability can be risked for ?
It is generally unsafe to run a
On 11/07/2014 09:05 PM, Boris Epstein wrote:
Hello all,
As far as which VMWare tools to use - the ones from VM Ware or the
open-vm-tools available through the EPEL - is there any consensus on what
is better? I know that for CentOS 7 you are told to use open-vm-tools but
what is the situation
On 10/14/2014 09:19 AM, Greg Lindahl wrote:
Yeah: don't run random combinations of rpms and then ask the mailing
list for support.
If yum/rpm allowed him to just upgrade the core kernel witouh the whole
system, that means it should be possible to run with it.
Please, be positive.
On 10/11/2014 12:03 PM, Niki Kovacs wrote:
# git push
error: The requested URL returned error: 403 Forbidden while accessing
https://github.com/kikinovak/centos/info/refs
fatal: HTTP request failed
As far as I understand, this error is server side because GItHub does
not allow write
On 10/08/2014 07:50 PM, Valeri Galtsev wrote:
Again, this is just $0.02 worth of my own opinion, definitely not a
consensus (and likely not even a majority opinion) on this list.
Just your humble opinion, but how do you insist and repeat it :-)
___
Hi all,
I try to setup a Samba/Openchange service.
In the Oopenchange documentation, they advise to launch samba in an
interactive mode and a verbose level: I like that.
http://www.openchange.org/cookbook/configuring.html
# samba -d3 -i -M single
The problem is I want to launch it via an
On 09/23/2014 12:06 AM, m.r...@5-cent.us wrote:
I just did a full update. X comes up in both screens... but the left one
is *not* rotated, while the right one is. And they're mirrored.
I tend to use arandr for screens settings.
It generates the appropriate xrandr invocation that I call at
Hi all,
I noticed that when I install some packages (precise list not defined),
my x86_64 C6 tends to install both 32bits and 64bits at the same time:
# yum install fontconfig freetype \
libfreetype.so.6 libfontconfig.so.1 \
libstdc++.so.6
Gives:
On 09/07/2014 09:44 PM, Oliver Schad wrote:
If you have 1.000 or 10.000 machines it*is* a reason to
think about every fucking dollar per machine you can save each month.
You could *just* *install* with 1GB and then get down to 512 at runtime.
___
Hi all,
On a C6 box, when I want to enable LDAP authentication, I issue:
# yum -y install nss-pam-ldapd pam_ldap nscd
# authconfig --enableldap --enableldapauth --enablemkhomedir \
--ldapserver=ldap://ldap-blabla/ \
--ldapbasedn=blabla \
--enablecache --disablefingerprint \
On 08/29/2014 11:06 AM, anax wrote:
As far as I read,
- there is a switch to sssd
- I found 1 link:
http://www.certdepot.net/ldap-client-configuration-authconfig/
sssd is a hard peace to configure. In C7 it wants absolutely to have an
encrypted connection to the LDAP server. Therefore, it
On 08/27/2014 09:42 PM, Sergio Belkin wrote:
I'd want to configure persistent static routes, ie in config files, but I
can't configure static routes, I tested:
[root@centos7 ~]# cat /etc/sysconfig/network-scripts/routes-enp0s3
ADDRESS0=10.10.10.0
NETMASK0=255.255.255.0
GATEWAY0=192.168.1.1
On 08/22/2014 11:27 PM, Александр Кириллов wrote:
Does it? There's mod_fastcgi in rpmforge but I don't feel
quite comfortable with packages from this repo.
Just check the spec file from the src.rpm and see if you find something
suspicious. Or, if you have a bit more spare time, check the spec
On 07/28/2014 12:03 PM, Shital Sakhare wrote:
RewriteEngine On
Options -Indexes
RewriteBase /
RewriteCond %{HTTP_REFERER} !^%{HTTP_HOST}$ [NC]
RewriteRule \.(swf|gif|png|jpg|doc|xls|pdf|html|htm|xlsx|docx)$ [R,L]
This can be worked arround very easy with wget:
On 01/15/2014 06:17 AM, Warren Young wrote:
On 1/14/2014 19:54, Les Mikesell wrote:
On Tue, Jan 14, 2014 at 8:43 PM, Stephen Harris li...@spuddy.org wrote:
If you are old enough, you might remember unix versions that
named disks by controller, bus, target numbers.
Hello,
Default MySQL installation on CentOS sets /bin/bash as shell.
I'm on a user cleanup task where I want reduce unneeded privileges to users.
What is the mysql user shell for? (What will happen if I change it to
/bin/false or whatever would disable it's shell?)
It's not only a matter of
On 01/10/2014 02:25 AM, Cliff Pratt wrote:
Can you not set up a test system and try it out? Or, if this is your only
system, could you not back it up, and test your suggestions out?
I dont have enough unit test in mind to assume it's safe.
The mysql shell is for viewing data in your databases
Hi all,
In order to make the same installation on two servers where all was
installed via yum/rpm, I want to dump a list of all installed packages
on the first server.
My problem is if I just yum list installed, some weird formatting
prints packages information on 2 lines...
I have to
#
On 2013-08-20 13:20, Dennis Jacobfeuerborn wrote:
On 19.08.2013 20:28, Joakim Ziegler wrote:
So, from what I understand, if I can get this thing running on CentOS
6.4, I'll get kernel discard support, and discard support in LVM when
running a RAID0. I'm using ext4.
Is that correct? Will this
On 2013-08-16 19:06, carlopmart wrote:
Hi all,
First of all, sorry for the OT. I need to buy a new laptop for my
work. My prerequisites are:
- RAM: 6/8 GiB (preferably 8 GiB)
- Processor: Core i7
- Disk: up to 500 GiB for SATA, 128 GiB for SSD.
- Graphics card: Intel HD (I really hate
On 2013-08-16 02:24, Robert Dinse wrote:
I am getting to where we want to offer virtual servers for lease but to
do so we need some method of measuring and/or limiting traffic to individual
guests.
I am wondering what others are using for this purpose? I know that you
can look at
Hi all,
I set up an ADSL connection using rp-pppoe/pppoe-setup.
The setting is to persist the connection, so that when the link goes
down, it's re-up'd by pppd.
The interface is ppp0 and it appears /sbin/ifup-local is not called
when re-uppping the ADSL link.
It is a problem for me, as I have
On 2013-07-30 11:30, Jake Shipton wrote:
Personally, I use EasyTAG. Used it for a fair few years now, works fine
I've used Linux for 12 years (not so old compared to some early geeks)
now and I remember the pack of software I used:
* Netscape communicator + navigator,
* XMMS
* KSCD
* Easytag
*
Hi,
We have on an old Dell 2850 with 4 SCSI drives, where we put a Hardware
RAID5 on 3 disks and left 1 as spare.
I dont remember exactly, but the RAID was setup in the BIOS, and when
installing CentOS6, I just saw 1 drive.
If it was software RAID, disk failure could be seen in /proc/mdastat,
On 2013-05-27 14:14, Rainer Duffner wrote:
When your infrastructure is completely virtualized, it may make no
sense.
But some people still prefer to run on real hardware;-)
What about using LXC? You can isolate 2 Apaches.
--
RMA.
___
CentOS
Hi all,
On a F18, I installed livecd-tools-18.15-1
I downloaded CenOS6.x minimal .iso and with livecd-iso-to-disk the
resulting USB is never bootable: the computer doesnt boot on it. Tested
on many computers.
The fact is I succeded to install CentOS on a Netbook (no CD/DVD tray),
but I dont
Hi all,
I had a big problem I did not figured out.
It is solved, but I have questions about the matter.
It's about Exim 4.72/CentOS 6.
Connecting to Exim via localhost is denies relay
Connecting to Exim via 127.0.0.1 accepts the relay
localhost is in the local_domains domainlists
localhost is
Hi all
I get a Cisco 1841 router, connecting the office through a CHAP PPPoE link:
[...]
interface Dialer1
ip address negotiated
ip mtu 1492
ip nat outside
ip virtual-reassembly
encapsulation ppp
ip tcp adjust-mss 1452
dialer pool 1
dialer-group 1
no cdp enable
ppp
Hi all,
I'm looking for an opensource solution for hosting webinars on a remote
dedicated server running CentOS6.
I would like to use FOSS, and it would be perfect if it's packaged, or
at least easealy packageable.
Please let me know if you have some suggestion.
--
RMA.
Hi all,
I forgot the name a sofware (I think it was something related to
security) wich checks for file content/permission changes, on a cron
trigger basis.
I could then have the list of added/changed files.
I dont want to use some selfmade git-based or find|xargs-based piece
of scripts.
On 11/26/2012 09:41 AM, John R. Dennison wrote:
On Mon, Nov 26, 2012 at 09:32:37AM +0300, Mihamina Rakotomandimby wrote:
Is there a special feature such as it only mail if STDERR?
Because all the messages (rsync output + echo foo) is to STDOUT.
Nope. _ALL_ output, bother stdout and stderr
On 11/23/2012 12:18 PM, Birta Levente wrote:
check out the crontab file if you have these,
If it's centos 6, maybe /etc/anacrontab
I have MAILTO=root in the file.
If I make a CLI test to mail to root, all is working.
Is there a special feature such as it only mail if STDERR?
Because all the
Hi all
I have a '/etc/cron.daily/push-to-backup' script which the content is:
#!/bin/bash
/usr/bin/rsync [... long options line ...]
echo finished pushing to the backup
Launched manually, it's OK.
Waiting for cron to execute it,
In the /var/log/cron, I see the starting time and the
On 10/10/2012 01:00 AM, Ljubomir Ljubojevic wrote:
On 10/03/2012 01:17 PM, Nux! wrote:
On 02.10.2012 23:29, Frank Cox wrote:
My cell phone provider just sent me a letter stating that my 3 year
contract is
up and they will give me a Samsung Galaxy 3 if I will sign a new
contract.
It should
On 08/31/2012 04:56 PM, Timothy Murphy wrote:
It appears to be running OK, but only catches about 20% of my spam.
If you have old rules and as far as spam evolves, that situation is fair
I wonder if others have experienced this decline?
No.
I suspect that sa-learn is not performing
On 08/16/2012 12:34 AM, Bill Campbell wrote:
Can somebody point me to a HowTO or other documentation describing the
tools available under the CentOS 5 KVM package to create and manage a
Windows 7 Pro VM? All my VM experience to date has been the old free
VMware Server.
Just for information,
Use sudo.
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
Hi all
I would like to install CentOS on this:
http://www.lannerinc.com/x86_Network_Appliances/FW-7520
- No VGA/DVI
- Only a console port (the old 9600 baudrate one)
- Boot on USB actived by default
Would you know a tutorial helping on installing CentOS on this?
I guess I have to
- download the
Hi all
I have a QoS script involving iptables and tc that I would like to
run after eth0 and eth1 come up.
I thought about some POST_UP_SCRIPT= or similar
in /etc/sysconfig/network (or ifcfg-ethX)
As I document, I found that http://goo.gl/jWoPn
According to these, I have to create (if they
On 05/23/2012 05:24 PM, Rudinei Dias wrote:
The question is if anyone knows where you have a RPM repository for the
tomcat7 HREL6/EL6.
I dream of the existence of a repository I just activate and issue
$ sudo yum install @tomcat
Like this one
On 05/01/2012 06:14 PM, Max Pyziur wrote:
Can someone offer their experience/advice in this regard?
If I execute the command
# yum install php53\*
... will this just install php53 and remove php-* packages?
Depending on your means, you could also install a virtual machine (KVM,
On 04/23/2012 06:44 PM, Peter Peltonen wrote:
I would add some LXC pins for quick ehanced chroot, depending on the use
case
LXC sounds interesting: are there any yum repositries / RPMs /
tutorials for CentOS available?
You dont need rpms: the libvirt directly use the LXC API.
A tutorial:
Hi all,
I have a box, until warranty (I may not open it) and 2 external USB hard
drives.
My perfect solution is to open the box, plug the drives on the SATA
slots, and use them.
Unfortunately, I'll have to fall back to the cheap solution: I would
like to use each external drive as physical
On 04/23/2012 01:43 PM, Karanbir Singh wrote:
I suspect Mihamina is trying to fix a non-existant problem
I'm on the way to buy the external racks (I got the disks), I did not
really test... Sorry if inconvenient.
--
RMA.
___
CentOS mailing list
On 04/20/2012 04:23 PM, Dmitry Cherkasov wrote:
On CentOS6 all is fine
with KVM right out of the box.
Never used XEN so cannot compare.
Same here.
I would add some LXC pins for quick ehanced chroot, depending on the use
case.
I think the OP should provide more details: What is benchmarked
On 04/20/2012 04:01 PM, Les Mikesell wrote:
18) If you're on AOL, don't worry about anything I've said here.
You're already a fucking laughing stock, and there's no hope for you.
Oh, that fateful day when AOL joined usenet, and usenet died.
IIRC that wasn't the same day.
Was still a case of
On 04/17/2012 01:18 AM, Max Pyziur wrote:
Greetings,
We have someone requesting the use of Wordpress 3.3.1. It requires PHP 5.2
minimum.
Currently, our machine is running CentOS 5.7.
What about the IUS repository listed here
http://wiki.centos.org/AdditionalResources/Repositories ?
IUS
Hi all,
I have installed the recommended installs from here:
http://wiki.centos.org/HowTos/RebuildSRPM
I want to build a ipfm RPM on a CentOS 6.2, for legacy purpose.
I cant immediately get rid of that piece of software, but we're on the
move...
So:
$ wget
On 04/17/2012 12:17 PM, Rob Kampen wrote:
source packages are stored in the vault.centos.org repo.
Did not find, but I just discovered (by jus reading further with
attention) that the source has a spec file:
http://robert.cheramy.net/ipfm/browser/trunk?order=name
Thank you very much!
--
Hi all,
When trying to rpmbuild
http://robert.cheramy.net/ipfm/browser/trunk/redhat/ipfm.spec, I do this:
[mihamina@centos6-01 redhat]$ rpmbuild -ba ipfm.spec
error: line 5: Unknown tag: Licence: GPL
And I get the error above.
[mihamina@centos6-01 redhat]$ head -n 5 ipfm.spec
On 04/17/2012 11:11 PM, Markus Falb wrote:
The error message is telling you that you made a typo.
http://www.rpm.org/max-rpm-snapshot/s1-rpm-inside-tags.html says
Licence: is a valid tag. Isnt'it?
License: were a valid tag.
Oh my god, a typo...
t...
Thank you Markus.
--
RMA.
On 04/11/2012 01:35 PM, sri wrote:
Is there anything that I have to check to nail down the issue.
Any pointers are highly appreciated.
I did not understand your issue:
- Do you want to get rid of the peudo interface?
- Do you want the pseudo interface not to get a DHCP answer?
- Do you want the
On 03/27/2012 11:20 PM, Piero wrote:
normally I would use ssh to reach the server I need to manage but
actually I'm working in an environment where internet connection is
filtered from firewalls and proxies: in a such place it is not
possible to use ssh as its connection is closed as soon as
Hi all,
CentOs has choosen anacron as default cron daemon.
I did not look further about the reasons, I think there are some good
reasons.
I want to create a minute based set of scripts.
No much precision required, once a minute more or less 20 sec is OK.
Using anacron, how do you recommend to
On 03/26/2012 01:00 PM, Markus Falb wrote:
The load average has relationship with I/O.
Not necessarily.
Agreed.
I would define load as the number of processes who are waiting to get
cpu time.
I should have said statistically, I have noticed...
I missed precision.
--
RMA.
On 03/24/2012 02:33 PM, Timothy Murphy wrote:
Any suggestions, advice or experience of this problem gratefully received.
An advice among all others:
- When the machine gets stable, disable FS checks (in fstab, I dont
remember what field to set to 0)
- Setup the filesystem not to ask for check
On 03/26/2012 07:31 AM, Kaushal Shriyan wrote:
Are there tools or utilities to understand about the reason behind high
load on CentOS Linux.
Please help me understand with examples.
How did you know there is a high load in the first place?
Using w command
- top
- iotop
The load average has
On 02/29/2012 04:11 AM, fakessh @ wrote:
What is the correct procedure to build an rpm with this type of package
tar.xz
the standard package rebuilding, I guess.
just have to change the decompression utility call
--
RMA.
___
CentOS mailing list
Hi all,
I wanted to schedule some rsync backups and found that CentOS is by
default using anacron.
I'm mostly used with the historical cron, but let's follow the progress :-)
- I made a shell script in /etc/cron.daily/dobackup
- I made it 755, root.root.
- In /etc/anacrontab,
On 02/09/2012 01:16 PM, John R. Dennison wrote:
On Thu, Feb 09, 2012 at 12:07:34PM +0200, Peter Peltonen wrote:
There is a PHP 5.2 RPM for CentoOS5 in the testing repo:
http://dev.centos.org/centos/5/testing/SRPMS/
Use the IUS repository and the php-5.2.17 packages they supply [...]
Please
Hi all,
My goal is to have PHP 5.2.x on a centos virtual machine (LXC)
Looking at the repositories:
- 6.2 has php 5.3:
ftp://ftp.free.fr/mirrors/ftp.centos.org/6.2/updates/i386/drpms/
- 5.7 has php 5.1
ftp://ftp.free.fr/mirrors/ftp.centos.org/5.7/updates/i386/RPMS/
I'll have to rebuild a source
Hi all
Just on a fresh CentOS 6.2 minimal install, it doesnt find lxc:
[mihamina@dev-spare ~]$ sudo yum install lxc
[...]
No package lxc available.
Error: Nothing to do
[mihamina@dev-spare ~]$ yum provides lxc-create
[...]
No Matches found
Well, I think this is not really a
Hi all,
In http://goo.gl/Krjfh I read:
+++
Upgrading from CentOS-4 or CentOS-5:
We recommend everyone run through a reinstall rather than attempt an
inplace upgrade from CentOS-4 or CentOS-5
+++
Do you ever now if that advice will be up to
On 02/04/2012 07:53 AM, Robert Spangler wrote:
snip
DEVICE=eth#
ONBOOT=yes
BRIDGE=br#
/snip
Thank you so much, Robert.
That is the thing I wanted to do.
For the record, in Debian world, it's
auto br0
iface br0 inet static
address 192.168.0.10
network 192.168.0.0
Hi all,
Having a 4 NIC server, I want to bridge eth2 and eth3, with a bridge
named br0.
Searching the web I only found about creating a file
/etc/sysconfig/network-scripts/ifcfg-br0, but did not find where to
explicitely list what ports will be bridged.
Where is it configured?
Thank you.
78 matches
Mail list logo
