[CentOS] 4kB sector size HDDs
Hello again. Do any of you have one of the 'new' HDDs with 4kB Sectors currently in use? I would upgrade to the 4kB disks but I don't know if this might be problematic as I intend to use ZFS w/ RAIDz or at least a classic RAID6. How might this affect performance under 5.5 and how do I go about setting up the alignment of the partitions I use? Kind regards Dawid Horace ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] 4kB sector size HDDs
how do I go about setting up the alignment of the partitions I use? If you use one large partition it's easy: you just create the partition leaving 1 meg of free space before the partition. This causes the partition to start at sector 2048, which is a number that 4096 is divisible by. Newer versions of disk utilities like gparted suggest this for you by placing a 1 in the 'Free Space Preceding' box when you go to create a new partition. If you create multiple partitions, it's a little harder since you have make sure that subsequent partitions start on sectors that can be divided evenly into 4096. I've never done this as I always set up one large partition on my storage arrays, and I use a separate drive for the OS to boot from and another separate drive for my VMs. I do this for performance reasons. All of this is explained more or less if you google. ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] 4kB sector size HDDs
--On Thursday, April 21, 2011 11:16:36 AM +0200 Dawid Horacio Golebiewski
dawid.golebiew...@tu-harburg.de wrote:
Do any of you have one of the 'new' HDDs with 4kB Sectors currently in
use?
I have them in use, and set up the partitions manually before installing
the OS. This is the relevent entry from my server changelog, prior to
installing CentOS 5.5:
+ since this machine is using new drives with 4k blocks,
used fdisk to ensure that sector alignment will be sane:
fdisk -H 224 -S 56 /dev/sd{a,b}
In doing so, I created a 200MB RAID1 partition (type 0xfd)
and another RAID1 partition with the remaining disk for use
by LVM.
I found it necessary to use fdisk manually on both disks,
because the following command choked (probably due to
the geometry thing):
sfdisk -d /dev/sda | sfdisk /dev/sdb
(DOESN'T WORK)
I case it's not obvious, the partitions on sda and sdb are then
mirrored, the small one for /boot, the large one for the remaining
filesystems under LVM.
If you're using the Caviar green drives, beware of excessive head
park and quickly increasing load cycle counts. I fixed that with
using an idle timeout of 300 seconds (vice 8 seconds) per:
http://community.wdc.com/t5/Desktop/Green-Caviar-High-Load-Cycle-Cout-after-short-operation-time/td-p/15731/page/7
Devin
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
