Hi,
Can anyone please help.
I have an Intel NUC11i7 running CentOS 8.4 successfully.
I have a Plugable USB 3.0 to 2.5GbE adapter to be used with the NUC.
This works at 1GbE but the standard CentOS 8.4 driver will not allow me to
change the speed.
Can anyone please point me in the right
they seem to only have binary drivers for Ubuntu 14+, with no source links
on the vendor's website, and I looked up the chip it uses, DisplayLink
DL-5500, that too says it only supports Ubuntu, and had no source download
links either, further, the Ubuntu driver consists of 3 separate giant .run
Hi All - Has anyone tried using a USB 4K adapter ? Something like
Startech USB32HD4K?
Are these devices on option for linux ? Thanks
Jerry
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
On 07/08/2020 06:55 PM, H wrote:
> On 07/08/2020 11:58 AM, John Pierce wrote:
>> On Wed, Jul 8, 2020 at 8:46 AM H wrote:
>>
>>> I believe I mentioned that the UPS has the serial port, the computer thus
>>> has USB.
>>>
>>>
>> yes, but is it 'basic serial UPS' or is it 'enhanced serial UPS' ?
Check the voltages on your adapter. I use such adapters in the machine shop
so machinists can share the CNC programs they write on a PC with their CNC
controllers. The CNC controllers can be fussy about voltages, and some
cheap RS232-USB adapters only generate +/-5vdc. It's within the RS232
On 07/08/2020 11:58 AM, John Pierce wrote:
> On Wed, Jul 8, 2020 at 8:46 AM H wrote:
>
>> I believe I mentioned that the UPS has the serial port, the computer thus
>> has USB.
>>
>>
> yes, but is it 'basic serial UPS' or is it 'enhanced serial UPS' ?the
> former do NOT use the rx/tx data of
On 07/08/2020 02:40 PM, Chris Adams wrote:
> Once upon a time, John Pierce said:
>> yes, but is it 'basic serial UPS' or is it 'enhanced serial UPS' ?the
>> former do NOT use the rx/tx data of the serial port at all, they ONLY use
>> the serial port control signals, and they probably will
On 07/08/2020 03:02 PM, Fred Smith wrote:
> On Wed, Jul 08, 2020 at 01:40:27PM -0500, Chris Adams wrote:
>> Once upon a time, John Pierce said:
>>> yes, but is it 'basic serial UPS' or is it 'enhanced serial UPS' ?the
>>> former do NOT use the rx/tx data of the serial port at all, they ONLY
On Wed, Jul 08, 2020 at 01:40:27PM -0500, Chris Adams wrote:
> Once upon a time, John Pierce said:
> > yes, but is it 'basic serial UPS' or is it 'enhanced serial UPS' ?the
> > former do NOT use the rx/tx data of the serial port at all, they ONLY use
> > the serial port control signals, and
Once upon a time, mailist said:
> Even if you did have an RS232 port on the box, the serial drivers
> for CentOS 7 have
> never worked correctly. I had an application using RS232 that
> worked perfectly
> under CentOS 6, and then worked intermittently under CentOS 7, and
> failed miserably
> on
Once upon a time, John Pierce said:
> yes, but is it 'basic serial UPS' or is it 'enhanced serial UPS' ?the
> former do NOT use the rx/tx data of the serial port at all, they ONLY use
> the serial port control signals, and they probably will NOT work with a
> USB port because they require
ill
required.
From: CentOS on behalf of mailist
Sent: Wednesday, July 8, 2020 11:11 AM
To: CentOS mailing list
Subject: [EXTERNAL] Re: [CentOS] USB-serial adapter for CentOS 7
CAUTION: This email originated from outside of the organization. Do not click
links or open attachmen
On 2020-07-08 11:28, Tate Belden wrote:
I've several USB <-> RS-232 dongles around. As well as a few embedded
devices. They all "Just Work (tm)" on Redhat, CentOS, Fedora, Debian,
Raspian and Kali.
Even if you did have an RS232 port on the box, the serial drivers for
CentOS 7 have
never
> On Jul 8, 2020, at 10:58 AM, John Pierce wrote:
>
> On Wed, Jul 8, 2020 at 8:46 AM H wrote:
>
>>
>> I believe I mentioned that the UPS has the serial port, the computer thus
>> has USB.
>>
>>
> yes, but is it 'basic serial UPS' or is it 'enhanced serial UPS' ?the
> former do NOT use
On Wed, Jul 8, 2020 at 8:46 AM H wrote:
>
> I believe I mentioned that the UPS has the serial port, the computer thus
> has USB.
>
>
yes, but is it 'basic serial UPS' or is it 'enhanced serial UPS' ?the
former do NOT use the rx/tx data of the serial port at all, they ONLY use
the serial port
at I am saying), it does not resemble
>>
>> neither serial nor null-modem cables.
>>
>> Valeri
>>
>>>
>>> From: CentOS on behalf of H
>>
>>> Sent: Wednesday, July 8, 2020 10:13 AM
>>>
gt;> From: CentOS on behalf of H
>
>> Sent: Wednesday, July 8, 2020 10:13 AM
>> To: Centos Mailing List
>> Subject: [EXTERNAL] [CentOS] USB-serial adapter for CentOS 7
>>
>> CAUTION: This email originated from outside of the organization. Do
>not cl
is is already what I am saying), it does not resemble
neither serial nor null-modem cables.
Valeri
From: CentOS on behalf of H
Sent: Wednesday, July 8, 2020 10:13 AM
To: Centos Mailing List
Subject: [EXTERNAL] [CentOS] USB-serial adapter for CentOS 7
; Sent: Wednesday, July 8, 2020 10:13 AM
> To: Centos Mailing List
> Subject: [EXTERNAL] [CentOS] USB-serial adapter for CentOS 7
>
> CAUTION: This email originated from outside of the organization. Do not
> click links or open attachments unless you recognize the sender and know
I've used one on a Linux laptop, it "just worked" but the OS wasn't CentOS 7.
From: CentOS on behalf of H
Sent: Wednesday, July 8, 2020 10:13 AM
To: Centos Mailing List
Subject: [EXTERNAL] [CentOS] USB-serial adapter for CentOS 7
CAUTION: This email
If it is an older APC UPS, that uses basic serial signaling, it's not
actually a serial port, it's a criss-cross special serial cable that
manages the control lines with DSR DTR CTS and so forth. these are very
fussy cables that have to be exactly the right one or the UPS may just
abruptly shut
I need to connect an older APS UPS unit to a machine running CentOS 7.
Unfortunately the UPS only has a serial port whereas the computer does not. I
am aware that there are USB-serial adapters but that the hardware or the
drivers might fall short of expectations.
Does anyone have positive
I recently upgraded from CentOS 7 to CentOS 8.
I have a Mediasonic HF2-SU3S2 external drive enclosure with 4x3Tb drives
configured as a software RAID 5 array (mdadm) with LVM. It's connected
to a USB 3.0 port.
On CentOS 7, the drive performance is reasonable. On CentOS 8,
performance is
-
From: CentOS On Behalf Of Jerry Geis
Sent: October 4, 2019 1:08 PM
To: CentOS mailing list
Subject: Re: [CentOS] USB ISO for CentOS 8
>Then generate the .iso:
># cd /tmp/rhel7/
># mkisofs -o /tmp/rhel7test.iso -b isolinux/isolinux.bin -J -R -l -c
isolinux/boot.cat -no-emul-boot -boot-lo
>Then generate the .iso:
># cd /tmp/rhel7/
># mkisofs -o /tmp/rhel7test.iso -b isolinux/isolinux.bin -J -R -l -c
isolinux/boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table
-eltorito-alt-boot -e images/efiboot.img -no-emul->boot -graft-points -V
"RHEL-7.7 Server.x86_64" .
>^^^ Change the
On 10/4/19 5:30 PM, Jerry Geis wrote:
> I did the dd of the ISO to a 16G USB device.
>
> the second partition is FAT so I can edit it - I want to make a custom menu
> entry.
> I edited the grub.cfg - but that did not work - my menu option does not
> show.
If you boot via UEFI, you need to edit
m: CentOS On Behalf Of Jerry Geis
Sent: October 4, 2019 11:30 AM
To: CentOS mailing list
Subject: [CentOS] USB ISO for CentOS 8
I did the dd of the ISO to a 16G USB device.
the second partition is FAT so I can edit it - I want to make a custom menu
entry.
I edited the grub.cfg - but that did not w
I did the dd of the ISO to a 16G USB device.
the second partition is FAT so I can edit it - I want to make a custom menu
entry.
I edited the grub.cfg - but that did not work - my menu option does not
show.
Then I think I need to change BOOT.cfg and generate the grub.cfg - but I
dont know
in this
I copied the 7.7 Everything ISO to a 16G USB device using dd. I mounted
/dev/sdb2 and edited grub.cfg for my custom install option.
I then ran the command below to re-do the boot menu. the command runs ok -
However it did not work.
cd /mnt/usb/EFI/BOOT
grub2-mkimage -o bootx64.efi -p /efi/boot -O
Looks like my file was corrupt on the USB disk. Not sure how that happened.
I removed the file then I just copied the file from the Everything iso
image again and working now.
Jerry
On Wed, Sep 25, 2019 at 2:46 PM Jerry Geis wrote:
> I took the "everything" iso and did the dd command to my 16G
On 9/25/19 8:46 PM, Jerry Geis wrote:
> I took the "everything" iso and did the dd command to my 16G thumb drive.
>
> I booted and entered my usual ks=http://xxx on the boot line. All good so
> far.
> It gets my kickstart file and installation begins.
> At some point it says
>
> Installing
Hi
I did the dd iso to my USB. all is fine.
I can mount the second partition (which is not iso 9660) and edit the
grub.cfg file.
Question is what do I run after that so my new menu option appears ?
grub2-install /dev/sdd
Is that the correct command to get grub to notice my new file ? Assuming
I took the "everything" iso and did the dd command to my 16G thumb drive.
I booted and entered my usual ks=http://xxx on the boot line. All good so
far.
It gets my kickstart file and installation begins.
At some point it says
Installing libreoffice-opensymbol-fonts (492/1948)
Retrying download
ionice seems to help a bunch - thanks for the suggestion!
Jerry
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
On Tue, Aug 14, 2018 at 08:53:08AM -0400, Jerry Geis wrote:
>
> Hello - frequently I turn on my external USB 3.0 disk and back. While my
> machine is copying and backing up my desktop becomes very sluggish.
>
> Is there a way to change that ? I am using CentOS 7.5 x86 with a very nice
> processor
Hello - frequently I turn on my external USB 3.0 disk and back. While my
machine is copying and backing up my desktop becomes very sluggish.
Is there a way to change that ? I am using CentOS 7.5 x86 with a very nice
processor extra cores available and plenty of memory. There is no reason
the
- Oorspronkelijk bericht -
Van: "johan vermeulen7"
Aan: "CentOS mailing list"
Verzonden: Dinsdag 3 juli 2018 12:57:07
Onderwerp: Re: [CentOS] usb problem on Dell Latitude 3570
- Oorspronkelijk bericht -
Van: "Nataraj"
Aan: "CentOS mailing li
- Oorspronkelijk bericht -
Van: "Nataraj"
Aan: "CentOS mailing list"
Verzonden: Maandag 2 juli 2018 23:21:39
Onderwerp: Re: [CentOS] usb problem on Dell Latitude 3570
On 07/02/2018 01:49 AM, johan.vermeul...@telenet.be wrote:
> Hello All,
>
> afte
On 07/02/2018 01:49 AM, johan.vermeul...@telenet.be wrote:
> Hello All,
>
> after update to Centos7.5 all our Latitudes 3570 - some 150- suffer usb
> problems.
> Plug and play doesn't work any more, people need to insert usb devices -
> mouse, keyboard, eidreader - first and then boot
> in
Hello All,
after update to Centos7.5 all our Latitudes 3570 - some 150- suffer usb
problems.
Plug and play doesn't work any more, people need to insert usb devices - mouse,
keyboard, eidreader - first and then boot
in order to use them.
dmesg | tail -n15 gives these EM:
[ 25.164396] usb
On Thu, Jun 7, 2018 at 10:44 AM, Noam Bernstein wrote:
> I tend to do the analogous thing on the mac, except for converting the
> image first:
> https://www.lewan.com/blog/2012/02/10/making-a-bootable-usb-
> stick-on-an-apple-mac-os-x-from-an-iso
If you are using dd then there is no
On Thu, Jun 7, 2018 at 10:39 AM, Nicolas Kovacs wrote
>
> How do you write a bootable CentOS USB disk using either Windows 10 or
> Mac OS X ?
>
> I've googled this, of course, and there's quite a lot of possible
> solutions out there, so I'm curious about a more or less *orthod
> On Jun 7, 2018, at 11:39 AM, Nicolas Kovacs wrote:
>
> Hi,
> Me, I've been 100 % GNU/Linux since 2001, CentOS is running on my
> workstation and on my laptop, and I'm simply writing the ISO file to a
> USB stick using dd if=CentOS-.iso of=/dev/sdX.
I tend to do the analogous thing on the
write a bootable CentOS USB disk using either Windows 10 or
Mac OS X ?
I've googled this, of course, and there's quite a lot of possible
solutions out there, so I'm curious about a more or less *orthodox* way
of doing things.
Me, I've been 100 % GNU/Linux since 2001, CentOS is running on my
On Fri, Sep 29, 2017 at 09:02:08PM -0400, Fred Smith wrote:
> On Wed, Sep 27, 2017 at 12:08:59PM -0400, Fred Smith wrote:
> > On Wed, Sep 27, 2017 at 02:06:35PM +1000, Kahlil Hodgson wrote:
Below is an email from last year, and this is a followup or at
least related, so I'm including it below for
> -Original Message-
> From: Chris Olson [mailto:chris_e_ol...@yahoo.com]
> Sent: Thursday, November 16, 2017 5:42 PM
> To: CentOS Mailing List
> Subject: [CentOS] USB Serial Ports
>
> We have several CentOS 6 systems that are used in various configurations
>
We have several CentOS 6 systems that are used in various configurations
of test equipment. One of the primary functions of these systems is the
connectivity to serial ports of some operational systems that have serial
port control requirements. Lack of interface bus slots led us to the use
of
On Wed, Sep 27, 2017 at 12:08:59PM -0400, Fred Smith wrote:
> On Wed, Sep 27, 2017 at 02:06:35PM +1000, Kahlil Hodgson wrote:
> > Most of the useful audacity stuff is in their wiki:
> >
> > http://wiki.audacityteam.org/wiki/USB_mic_on_Linux
> >
> > seems like a good place to start.
>
> thanks,
On 27/09/17 13:31, Fred Smith wrote:
Can you sense my frustration here?
I'd appreciate any help that is actually helpful,... perhaps someone
who reads this actually has one of these things and has made it work?
thanks in advance!
Fred
Yes, I sense your frustration; I've had my fair share of
On Wed, Sep 27, 2017 at 02:06:35PM +1000, Kahlil Hodgson wrote:
> Most of the useful audacity stuff is in their wiki:
>
> http://wiki.audacityteam.org/wiki/USB_mic_on_Linux
>
> seems like a good place to start.
thanks, that probably is a good place to start. some of that
may be pretty old, but
Most of the useful audacity stuff is in their wiki:
http://wiki.audacityteam.org/wiki/USB_mic_on_Linux
seems like a good place to start.
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
> (and a possibly separate issue: how the heck does one point Audacity
> to a USB input? Can't find anything in its UI, and there's darn little
> help online that is actually helpful, in this regard.)
Not sure about the other stuff but my USB dock's mic input shows up in
Audacity on Fedora 26
I'm using Centos-7 on my PC, with ASUS motherboard. internal audio
has always worked fine EXCEPT that I can never get audio input (for
recording) to work. I want to feed audio from a phono turntable and
from a cassette deck. I use a phono preamp for the turntable, or
directly connect the tape
On Tue, Mar 14, 2017, 6:11 PM Jerry Geis wrote:
> Hi All - Been trying to find out if USB 3.1 support is in CentOS 7 and
> kernel 3.10 ?
>
> I see its in the 4.X kernel - but what about CentOS 7?
USB 3.1 Gen 1 is the same thing as USB 3.0.
USB 3.1 Gen 2 is a different
Hi All - Been trying to find out if USB 3.1 support is in CentOS 7 and
kernel 3.10 ?
I see its in the 4.X kernel - but what about CentOS 7?
Was hoping to make my external backups faster.
Thanks,
Jerry
___
CentOS mailing list
CentOS@centos.org
> -Original Message-
> From: CentOS [mailto:centos-boun...@centos.org] OnBehalf Of Gregory P.
> Ennis
> Sent: Sunday, February 19, 2017 12:31 PM
> To: centos@centos.org
> Subject: Re: [CentOS] usb drives & Orico ORICO9548U3-BK
>
>
> >
> &
>
> I decided to build an archive server for the purpose of backing up
> other fedora/centos desktops at the office. I built a machine and
> have
> installed Centos 7.3 on it with all updates current. I also
> purchased
> a 3.0 usb sata drive cabinet (Orico ORICO 9548U3-BK) and installed
> two
>
>
> I decided to build an archive server for the purpose of backing up
> other fedora/centos desktops at the office. I built a machine and have
> installed Centos 7.3 on it with all updates current. I also purchased
> a 3.0 usb sata drive cabinet (Orico ORICO 9548U3-BK) and installed two
>
> Is there a way to manually assign usb drives to a specified device
> label. Is there a way to force two usb drives to be labeled as
> /dev/sdc and /dev/sdd?
> UUID=f915a354-28bf-4110-bec9-3767ef1fe52c /boot xfsdefaults 0 0
Don't use device names, use UUIDs like the above.
Everyone,
Is there a way to manually assign usb drives to a specified device
label. Is there a way to force two usb drives to be labeled as
/dev/sdc and /dev/sdd?
I decided to build an archive server for the purpose of backing up
other fedora/centos desktops at the office. I built a machine
On 02/16/2017 11:58 AM, Jerry Geis wrote:
> When I plug in my device which is USB 2.0 into a 3.0 slot (cause that is
> all I have)
> [495042.943074] usb 5-2: new low-speed USB device number 6 using xhci_hcd
> [495043.100076] usb 5-2: device descriptor read/64, error -71
>
> I receive the above
--On Thursday, February 16, 2017 12:58 PM -0500 Jerry Geis
wrote:
[495043.100076] usb 5-2: device descriptor read/64, error -71
The USB driver uses negative values of the errors from
/usr/include/asm-generic/errno.h. 71 is EPROTO, a protocol error.
Check the USB
On 02/16/2017 01:20 PM, John R Pierce wrote:
look very closely at a USB 3.0 port, with the 'blue' tongued A
connector, and you'll see 5 additional pins in there behind the
standard USB1/2 4 pins.
I will be a monkey's uncle. Thanks for the pointers.
On 2/16/2017 1:12 PM, Gordon Messmer wrote:
On 02/16/2017 12:28 PM, John R Pierce wrote:
USB 1 and 2 used 4 pins.USB 3 ports have an ADDITIONAL 5 pins,
the original 4 are used for USB 1/2 operation, the new 5 only for USB
3 operation. they are effectively two completely independent
On 02/16/2017 12:28 PM, John R Pierce wrote:
USB 1 and 2 used 4 pins.USB 3 ports have an ADDITIONAL 5 pins, the
original 4 are used for USB 1/2 operation, the new 5 only for USB 3
operation. they are effectively two completely independent controllers.
Do you mean USB type C? USB 3 is
On 2/16/2017 9:58 AM, Jerry Geis wrote:
When I plug in my device which is USB 2.0 into a 3.0 slot (cause that is
all I have)
[495042.943074] usb 5-2: new low-speed USB device number 6 using xhci_hcd
[495043.100076] usb 5-2: device descriptor read/64, error -71
I receive the above error.
Is
On Thu, Feb 16, 2017 at 12:58:09PM -0500, Jerry Geis wrote:
> When I plug in my device which is USB 2.0 into a 3.0 slot (cause that is
> all I have)
> [495042.943074] usb 5-2: new low-speed USB device number 6 using xhci_hcd
> [495043.100076] usb 5-2: device descriptor read/64, error -71
>
> I
When I plug in my device which is USB 2.0 into a 3.0 slot (cause that is
all I have)
[495042.943074] usb 5-2: new low-speed USB device number 6 using xhci_hcd
[495043.100076] usb 5-2: device descriptor read/64, error -71
I receive the above error.
Is there a flag or setting that tells the USB to
On Mon, Feb 15, 2016 at 6:52 PM, Warren Young wrote:
> On Feb 15, 2016, at 10:34 AM, Mike - st257 wrote:
> >
> > I have not yet found a USB-to-serial adapter detected as /dev/ttyACM1.
> > Try /dev/ttyUSB0 ?
>
> Both naming schemes are correct, depending
On Feb 15, 2016, at 10:34 AM, Mike - st257 wrote:
>
> I have not yet found a USB-to-serial adapter detected as /dev/ttyACM1.
> Try /dev/ttyUSB0 ?
Both naming schemes are correct, depending on the *type* of USB to serial
converter. The difference comes down to a
On 16/02/16 01:32, Robert Heller wrote:
OK, I just tested it:
sauron.deepsoft.com% sudo /usr/sbin/setenforce permissive
sauron.deepsoft.com% sudo minicom
Device /dev/ttyACM0 access failed: No such file or directory.
sauron.deepsoft.com% sudo /usr/sbin/setenforce enforcing
Nope, that did not
I have not yet found a USB-to-serial adapter detected as /dev/ttyACM1.
Try /dev/ttyUSB0 ?
- Mike
On Sat, Feb 13, 2016 at 10:14 AM, Robert Heller wrote:
> I sent this out about a week or so ago, but I have heard nothing. I am
> *thinking* it is a SELINUX problem, but I
At Sun, 14 Feb 2016 19:20:48 -0500 Robert Heller wrote:
>
> At Mon, 15 Feb 2016 09:41:32 +1100 CentOS mailing list
> wrote:
>
> >
> > On 14/02/16 02:14, Robert Heller wrote:
> > > I sent this out about a week or so ago, but I have heard nothing. I am
On 14/02/16 02:14, Robert Heller wrote:
I sent this out about a week or so ago, but I have heard nothing. I am
*thinking* it is a SELINUX problem, but I cannot figure out what.
If you suspect SELinux is to blame, have you tried putting SELinux into
permissive mode to see that resolves the
I sent this out about a week or so ago, but I have heard nothing. I am
*thinking* it is a SELINUX problem, but I cannot figure out what. The SELINUX
settings for both machines are *exactly* the same (the stock defaults for a
standard CentOS 6 install). The *only* difference is that the desktop
On Sat, Feb 13, 2016 at 5:14 PM, Robert Heller wrote:
> I sent this out about a week or so ago, but I have heard nothing. I am
> *thinking* it is a SELINUX problem, but I cannot figure out what. The SELINUX
> settings for both machines are *exactly* the same (the stock
At Sat, 13 Feb 2016 10:14:30 -0500 CentOS mailing list
wrote:
>
> I sent this out about a week or so ago, but I have heard nothing. I am
> *thinking* it is a SELINUX problem, but I cannot figure out what. The SELINUX
> settings for both machines are *exactly* the same (the
> OK, I tried rebooting without the '8250.nr_uarts=8' option and that had no
> effect.
>
> I wonder if I should file a bug report? I don't know if I should file it
with
> the Red Hat bugzilla or the CentOS bugzilla.
Should be with the Red Hat, I guess.
I have two computers: both running CentOS 6.7, 64-bit, with
kernel 2.6.32-573.12.1.el6.x86_64. One is a laptop with an 2 core Intel
processor and the other is a desktop machine with a 4 core AMD processor. Both
with selinux enabled.
I have a USB serial port device (a RR-CirKits LCC-Buffer
Hi,
Posting this again as it has been drowned. can anybody assist?
--
Hi All,
I'm trying to disable USB storage devices in Centos7.1.1503.
I've setup udev rules to block all usb devices and then additional rules
to allow specific
Am 10.12.2015 um 09:37 schrieb Michael H :
>
> I'm trying to disable USB storage devices in Centos7.1.1503.
on EL6 we use:
# cat /etc/modprobe.d/usb-disabled.conf
install usb-storage /bin/true
# depmod -a
--
LF
___
CentOS
On Dec 10, 2015, at 1:37 AM, Michael H wrote:
>
> I've setup udev rules to block all usb devices and then additional rules
> to allow specific vendors / products to be used (mainly keyboards and
> mice).
It sounds like you’re reinventing the wheel:
On 10/12/15 10:02, Leon Fauster wrote:
> Am 10.12.2015 um 09:37 schrieb Michael H :
>>
>> I'm trying to disable USB storage devices in Centos7.1.1503.
>
> on EL6 we use:
>
> # cat /etc/modprobe.d/usb-disabled.conf
> install usb-storage /bin/true
>
> # depmod -a
Am 10.12.2015 um 11:11 schrieb Michael H :
>
>
> On 10/12/15 10:02, Leon Fauster wrote:
>> Am 10.12.2015 um 09:37 schrieb Michael H :
>>>
>>> I'm trying to disable USB storage devices in Centos7.1.1503.
>>
>> on EL6 we use:
>>
>> # cat
Please read my entire post! I need to allow specific devices, I am
trying to combat PTP mounting. not completely disable all USB devices.
On 10/12/15 15:17, Wes James wrote:
>
>> On Dec 10, 2015, at 1:37 AM, Michael H wrote:
>>
>> Hi,
>> Posting this again as it has been
On 10/12/15 15:49, Leon Fauster wrote:
> Am 10.12.2015 um 11:11 schrieb Michael H :
>>
>>
>> On 10/12/15 10:02, Leon Fauster wrote:
>>> Am 10.12.2015 um 09:37 schrieb Michael H :
I'm trying to disable USB storage devices in Centos7.1.1503.
>>>
> On Dec 10, 2015, at 1:37 AM, Michael H wrote:
>
> Hi,
> Posting this again as it has been drowned. can anybody assist?
>
>
> --
>
> Hi All,
>
> I'm trying to disable USB storage devices in Centos7.1.1503.
Am 10.12.2015 um 17:02 schrieb Michael H :
>
> On 10/12/15 15:49, Leon Fauster wrote:
>> Am 10.12.2015 um 11:11 schrieb Michael H :
>>>
>>>
>>> On 10/12/15 10:02, Leon Fauster wrote:
>>> I've achieved disabling USB devices and then allowing specific
Hi All,
I'm trying to disable USB storage devices in Centos7.1.1503.
I've setup udev rules to block all usb devices and then additional rules
to allow specific vendors / products to be used (mainly keyboards and
mice). This is all working perfectly.
cat /etc/udev/rules.d/01-usblockdown.rules
#
Just disconnected, power-cycled then reconnected the drive.
/var/log/messages tell me:
Oct 26 20:50:10 homebase kernel: EXT4-fs warning (device sdd1):
ext4_clear_journal_err: Filesystem error recorded from previous mount:
IO failure
Oct 26 20:50:10 homebase kernel: EXT4-fs warning (device
I 'just' noticed that at some point, my USB backup drive on my server is
mounted as read-only and all of my background sync cron jobs have been
failing.
So I need to fix this without rebooting the server.
I can VNC into the server and running "mount" shows:
/dev/sdc1 on /media/HD103SI type
On 10/25/2015 11:12 AM, Barry Brimer wrote:
I 'just' noticed that at some point, my USB backup drive on my server
is
mounted as read-only and all of my background sync cron jobs have been
failing.
So I need to fix this without rebooting the server.
How can I get this drive r/w?
Have you
I 'just' noticed that at some point, my USB backup drive on my server
>is
>mounted as read-only and all of my background sync cron jobs have been
>failing.
>
>So I need to fix this without rebooting the server.
>How can I get this drive r/w?
Have you tried "mount -o remount,rw "?
The
hmmm. my associate needs a USB sound thing in his stack... its
always worked before, but when I brought him up on a new system with
6.7, the device is recognized
usb 1-1: New USB device found, idVendor=08bb, idProduct=2704
usb 1-1: New USB device strings: Mfr=1, Product=2,
On Thu, 2015-08-27 at 02:18 +, Chris Olson wrote:
We plan to use new digital voice recorders.
Is this difference in USB connectivity a concern for file transfer to
CentOS computers?
I have a digital voice recorder. I use it just like a USB memory stick -
although I haven't re-formatted
We plan to use new digital voice recorders. Products are available
from Olympus, Sony, and others. All of these digital voice recorders
offer file-based audio storage. We would like to take advantage of
this feature and move the files to our computers.
It is not clear whether there is a
On 8/26/2015 7:18 PM, Chris Olson wrote:
We plan to use new digital voice recorders. Products are available
from Olympus, Sony, and others. All of these digital voice recorders
offer file-based audio storage. We would like to take advantage of
this feature and move the files to our computers.
Chris Murphy wrote:
On Sun, Jul 5, 2015 at 4:43 PM, Timothy Murphy
gayle...@eircom.net wrote:
Gordon Messmer wrote:
On 07/03/2015 03:43 AM, Timothy Murphy wrote:
I've tried this again, and it does not seem to work.
Have you actually tried it?
I don't have a CentOS system here that I can
On 07/03/2015 03:43 AM, Timothy Murphy wrote:
I've tried this again, and it does not seem to work.
Have you actually tried it?
I don't have a CentOS system here that I can reboot readily. And it
occurs to me that if I did, I didn't ask if your system boots via BIOS
or UEFI. If it's BIOS, I
Gordon Messmer wrote:
On 07/03/2015 03:43 AM, Timothy Murphy wrote:
I've tried this again, and it does not seem to work.
Have you actually tried it?
I don't have a CentOS system here that I can reboot readily. And it
occurs to me that if I did, I didn't ask if your system boots via BIOS
1 - 100 of 398 matches
Mail list logo