Do you have the proper gateway/route configured on the VM?
On Wed, Jun 11, 2014 at 9:50 AM, Steve Campbell campb...@cnpapers.com wrote:
On 6/10/2014 4:00 PM, Zoltan Frombach wrote:
On 6/10/2014 9:51 PM, Steve Campbell wrote:
On 6/10/2014 3:38 PM, Zoltan Frombach wrote:
On 6/10/2014 9:27 PM,
On 6/11/2014 3:50 PM, Steve Campbell wrote:
On 6/10/2014 4:00 PM, Zoltan Frombach wrote:
On 6/10/2014 9:51 PM, Steve Campbell wrote:
On 6/10/2014 3:38 PM, Zoltan Frombach wrote:
On 6/10/2014 9:27 PM, Steve Campbell wrote:
On 6/10/2014 3:09 PM, Zoltan Frombach wrote:
Steve,
Try the
On 6/11/2014 9:56 AM, NightLightHosts Admin wrote:
Do you have the proper gateway/route configured on the VM?
On Wed, Jun 11, 2014 at 9:50 AM, Steve Campbell campb...@cnpapers.com wrote:
On 6/10/2014 4:00 PM, Zoltan Frombach wrote:
On 6/10/2014 9:51 PM, Steve Campbell wrote:
On 6/10/2014
On 6/11/2014 10:03 AM, Zoltan Frombach wrote:
On 6/11/2014 3:50 PM, Steve Campbell wrote:
On 6/10/2014 4:00 PM, Zoltan Frombach wrote:
On 6/10/2014 9:51 PM, Steve Campbell wrote:
On 6/10/2014 3:38 PM, Zoltan Frombach wrote:
On 6/10/2014 9:27 PM, Steve Campbell wrote:
On 6/10/2014 3:09 PM,
On 6/11/2014 10:13 AM, Zoltan Frombach wrote:
On 6/11/2014 4:10 PM, Steve Campbell wrote:
On 6/11/2014 10:03 AM, Zoltan Frombach wrote:
On 6/11/2014 3:50 PM, Steve Campbell wrote:
On 6/10/2014 4:00 PM, Zoltan Frombach wrote:
On 6/10/2014 9:51 PM, Steve Campbell wrote:
On 6/10/2014 3:38 PM,
On 6/11/2014 4:44 PM, Steve Campbell wrote:
On 6/11/2014 10:13 AM, Zoltan Frombach wrote:
On 6/11/2014 4:10 PM, Steve Campbell wrote:
On 6/11/2014 10:03 AM, Zoltan Frombach wrote:
On 6/11/2014 3:50 PM, Steve Campbell wrote:
On 6/10/2014 4:00 PM, Zoltan Frombach wrote:
On 6/10/2014 9:51 PM,
On 6/11/2014 10:56 AM, Zoltan Frombach wrote:
On 6/11/2014 4:44 PM, Steve Campbell wrote:
On 6/11/2014 10:13 AM, Zoltan Frombach wrote:
On 6/11/2014 4:10 PM, Steve Campbell wrote:
On 6/11/2014 10:03 AM, Zoltan Frombach wrote:
On 6/11/2014 3:50 PM, Steve Campbell wrote:
On 6/10/2014 4:00
On 6/11/2014 1:15 PM, Steve Campbell wrote:
On 6/11/2014 10:56 AM, Zoltan Frombach wrote:
On 6/11/2014 4:44 PM, Steve Campbell wrote:
On 6/11/2014 10:13 AM, Zoltan Frombach wrote:
On 6/11/2014 4:10 PM, Steve Campbell wrote:
On 6/11/2014 10:03 AM, Zoltan Frombach wrote:
On 6/11/2014 3:50 PM,
On 6/11/2014 7:27 PM, Steve Campbell wrote:
On 6/11/2014 1:15 PM, Steve Campbell wrote:
On 6/11/2014 10:56 AM, Zoltan Frombach wrote:
On 6/11/2014 4:44 PM, Steve Campbell wrote:
On 6/11/2014 10:13 AM, Zoltan Frombach wrote:
On 6/11/2014 4:10 PM, Steve Campbell wrote:
On 6/11/2014 10:03 AM,
I had so much trouble putting Centos 6 guest VMs on a Centos 5 host that
I finally switched to a Centos 6 host.
I've not needed more that test VMs, so I've used Virtual Machine Manager
on the old system, which worked pretty well, so I decided to create my
first KVM guest machine. I noticed
On 10/06/14 11:46 AM, Steve Campbell wrote:
On 6/10/2014 10:46 AM, Digimer wrote:
On 10/06/14 10:03 AM, Steve Campbell wrote:
I had so much trouble putting Centos 6 guest VMs on a Centos 5 host that
I finally switched to a Centos 6 host.
I've not needed more that test VMs, so I've used
On 6/10/2014 12:05 PM, Digimer wrote:
On 10/06/14 11:46 AM, Steve Campbell wrote:
On 6/10/2014 10:46 AM, Digimer wrote:
On 10/06/14 10:03 AM, Steve Campbell wrote:
I had so much trouble putting Centos 6 guest VMs on a Centos 5 host
that
I finally switched to a Centos 6 host.
I've not
Do you have only one public IP address and do you want to share that
between your host and your VM(s)? In this case you must use NAT config.
If you have multiple public IPs and you want to assign one of those to
your host and another of those to your guest (VM) then you must create a
bridge
On 10/06/14 12:38 PM, Steve Campbell wrote:
On 6/10/2014 12:05 PM, Digimer wrote:
On 10/06/14 11:46 AM, Steve Campbell wrote:
On 6/10/2014 10:46 AM, Digimer wrote:
On 10/06/14 10:03 AM, Steve Campbell wrote:
I had so much trouble putting Centos 6 guest VMs on a Centos 5 host
that
I
Steve Campbell campb...@cnpapers.com writes:
On 6/10/2014 10:46 AM, Digimer wrote:
On 10/06/14 10:03 AM, Steve Campbell wrote:
I had so much trouble putting Centos 6 guest VMs on a Centos 5 host that
I finally switched to a Centos 6 host.
I've not needed more that test VMs, so I've used
On 6/10/2014 12:43 PM, Digimer wrote:
On 10/06/14 12:38 PM, Steve Campbell wrote:
On 6/10/2014 12:05 PM, Digimer wrote:
On 10/06/14 11:46 AM, Steve Campbell wrote:
On 6/10/2014 10:46 AM, Digimer wrote:
On 10/06/14 10:03 AM, Steve Campbell wrote:
I had so much trouble putting Centos 6
Steve,
Try the following config.
On your host:
/etc/sysconfig/network-scripts/ifcfg-eth0:
DEVICE=eth0
BOOTPROTO=none
ONBOOT=yes
NM_CONTROLLED=no
TYPE=Ethernet
HWADDR=xx:xx:xx:xx:xx:xx- put your physical NIC's MAC address here
BRIDGE=br0
USERCTL=no
IPV6INIT=no
IPV6_AUTOCONF=no
On 6/10/2014 3:09 PM, Zoltan Frombach wrote:
Steve,
Try the following config.
On your host:
/etc/sysconfig/network-scripts/ifcfg-eth0:
DEVICE=eth0
BOOTPROTO=none
ONBOOT=yes
NM_CONTROLLED=no
TYPE=Ethernet
HWADDR=xx:xx:xx:xx:xx:xx- put your physical NIC's MAC address here
On 6/10/2014 9:27 PM, Steve Campbell wrote:
On 6/10/2014 3:09 PM, Zoltan Frombach wrote:
Steve,
Try the following config.
On your host:
/etc/sysconfig/network-scripts/ifcfg-eth0:
DEVICE=eth0
BOOTPROTO=none
ONBOOT=yes
NM_CONTROLLED=no
TYPE=Ethernet
HWADDR=xx:xx:xx:xx:xx:xx-
On 6/10/2014 3:38 PM, Zoltan Frombach wrote:
On 6/10/2014 9:27 PM, Steve Campbell wrote:
On 6/10/2014 3:09 PM, Zoltan Frombach wrote:
Steve,
Try the following config.
On your host:
/etc/sysconfig/network-scripts/ifcfg-eth0:
DEVICE=eth0
BOOTPROTO=none
ONBOOT=yes
NM_CONTROLLED=no
On 6/10/2014 9:51 PM, Steve Campbell wrote:
On 6/10/2014 3:38 PM, Zoltan Frombach wrote:
On 6/10/2014 9:27 PM, Steve Campbell wrote:
On 6/10/2014 3:09 PM, Zoltan Frombach wrote:
Steve,
Try the following config.
On your host:
/etc/sysconfig/network-scripts/ifcfg-eth0:
DEVICE=eth0
On 6/10/2014 4:00 PM, Zoltan Frombach wrote:
On 6/10/2014 9:51 PM, Steve Campbell wrote:
On 6/10/2014 3:38 PM, Zoltan Frombach wrote:
On 6/10/2014 9:27 PM, Steve Campbell wrote:
On 6/10/2014 3:09 PM, Zoltan Frombach wrote:
Steve,
Try the following config.
On your host:
On Tue, Jun 10, 2014 at 10:03 AM, Steve Campbell campb...@cnpapers.com wrote:
I had so much trouble putting Centos 6 guest VMs on a Centos 5 host that
I finally switched to a Centos 6 host.
I've not needed more that test VMs, so I've used Virtual Machine Manager
on the old system, which
23 matches
Mail list logo
