Replies to this message are sent to The Chevelle Mailing List
The regular Goodwrench 350 is made in Mexico, as are the Vortec
heads. No promises on the B 350, but mine doesn't say Hencho En
Mexico on it that I've found.
It's Hecho
Replies to this message are sent to The Chevelle Mailing List
I think the Mexico engines are made a little stronger then the American
blocks. I read this in Hotrod Magazine way back in the early 90's.
That could be true. I never got
Replies to this message are sent to The Chevelle Mailing List
I wonder what all the hubb of bub was all about on HOT ROD! I think
this article came out in the late 80's. I can't quite remember but they
built a 383 combo for a
Replies to this message are sent to The Chevelle Mailing List
Bummer.
Very sorry to hear about this Spudbest wishes that it all works out
alright in the endI hate reading posts like thistailgaters should
be shot on
Does any body know of a reasonabley
priced auto transportation service.
Call Dependable Auto Shippers...they shipped my MCSS from Dallas
to Nebraska (terminal to terminal) for $550. Of course that means you
deliver and pick up the vehicle in major cities, but it's a lot cheaper
than the door to
At 04:34 AM 10/27/2001, you wrote:
as
for the monte-- that dude oughta be drawn quartered
just my opinon..
He will be when he gets the proceeds from the sale...nobody in his right
mind would pay enough for him to profit from that paint jobjust think
what
Replies to this message are sent to The Chevelle Mailing List
does anyone know any specs on the Goodwrench 350 engine. i remember someone
wanting to buy one awail ago and everyone was saying some pretty good things
about it. i need
I like the looks of the '70-72 Monte Carlo but this one just ain't
my cup of tea...
Aw C'mon, you don't like it? I think that grille is something
else...especially with the twice stripes running through it!!!
Just kidding, it looks like another screwed up classic to
mesad.
Kelly
Can
anyone tell me if the speedo cable is screwed into the speedo or just
twist-locked on there like it is at the transmission.. I'll be hating
life if I have to yank my entire dash cluster to fix a busted cable.. I
might as well put in my floor-shiter speedo without the gear indicator if
I have
Replies to this message are sent to The Chevelle Mailing List
Hey, where are you at? Where would this club be located out of if made
possible?
P. Hernandez
68 chevelle
austin tx.
Hey Paulcurrently we are in East Texas close to
Replies to this message are sent to The Chevelle Mailing List
I wouldn't mind being part of the team, Although I'm in Austin?
Does this mean we will have our own Texas chat forum?
If you mean email list, yeswe'd set one up in
Replies to this message are sent to The Chevelle Mailing List
We could call it the LS(No TB) club, right Kelly ;)
No TB is rightthose two are permanently banned from any activity I'm
involved inwhat a coupla maroons..
Replies to this message are sent to The Chevelle Mailing List
What is all that abbreviation for?
The old club was called the LSCC (Lone Star Chevelle Club) and the
domineering Pres Vp maroons were Tom Brenda..
Kelly
At 04:54 PM 10/24/2001, you wrote:
I'D CALL
IT TEXAS BOYS AND THEIR TOYS
That's not too bad
Kelly
Replies to this message are sent to The Chevelle Mailing List
He didn't happen to have a 70 Elky for sale a couple of years ago did he?
Sounds like the guy that tried to jack up the price when I wanted to come
down and look at it.
Replies to this message are sent to The Chevelle Mailing List
- RU moving back??
Yep...long story but the job and the health care out here sucks...have to
go back for both reasons.
Kelly
Replies to this message are sent to The Chevelle Mailing List
I've been trying to catch up on this thread. Apparently I missed
something. Is someone gathering info to resurect the club? Is it just
talking out loud? What is
Replies to this message are sent to The Chevelle Mailing List
An recommendations for after market rally wheels, 15 X 8
www.Rim1.com they don't carry the 16x8 size as far as I know, but you can
get the original sizes for less than
Dancers
Flailing Wildly
You don't know how true that statement isyou musta lived there
before
Kelly
Replies to this message are sent to The Chevelle Mailing List
I think that Edelbrock bought out Weber.
Thanks, that's what I meant...
The Hannas
2 Elks Ranch
-
To
Replies to this message are sent to The Chevelle Mailing List
Dave,
Can you contact me off list asap? We're going to have to come back
to Dallas and I need to ask you a question. Thanks, Kelly
The Hannas
Replies to this message are sent to The Chevelle Mailing List
I just ordered a Edelbrock Performer intake and
Edelbrock 500cfm carb from Jegs. The Jegs tech guy
recommended a square-bore adaptor when using the
Performer manifold with
Replies to this message are sent to The Chevelle Mailing List
I'm looking for an intake manifold for my 283. It has to be square-bore to
fit my Carter AFB. Are all of the OEM cast iron manifolds spread-bore (for
quadrajets)? The
Replies to this message are sent to The Chevelle Mailing List
While I'm asking questions, I was advised to buy a Carter AFB 600 cfm for my
283. Recently another guy told me that a 600cfm might bog and he would
recommend a 500cfm on a
I
have sent this email site two messages on this but have not heard from
him.
Hmmm.It might be hard to find the shop he's talking about in Phoenix
without his helpoh well, it was worth a try.
The Hannas
2 Elks Ranch
I am looking for a source for a
reproduction of the Diablo hood decal on the 1978 Caballero Diablo.
Neither Phoenix Graphics or Stencils and Stripes has one.
Jim Nelems
Jim, I've sent this recently, but don't know for sure if he can get
one
From his web site...
GMC Diablo
A place here in
first,would
check out wiring to door switchs, sounds like poss.
grounded wire,next go after head light switch as every thing is wired
through this (reason ask vehicle/year was some have sequencial lighting
witch will affect this operation)
let me know it works out
Robert,
I'll try
that, thanks
Replies to this message are sent to The Chevelle Mailing List
Here's a puzzler for you electrical guysI have the kind of interior
lights that go off after a short delay when the doors are closed. The other
day they stayed on. I
At 02:10 PM 09/22/2001, you wrote:
kelly,
its what i do
what type year of car
1978 Chevy El Camino SS.
The Hannas
2 Elks Ranch
Replies to this message are sent to The Chevelle Mailing List
very nice, but I wouldn't want to download it at 56K.
Yeah, not much web content is actually made for 56k anymore. Mine runs at
48-49.3k and it took a few minutes to
At 05:59 PM 09/19/2001, you wrote:
anyone
ever shipped car doors? Can any of you guys recommend someone to do this
type of thing? I've never attempted this type of thing before I
want to ship an el camino door from dfw TX - Colorado. thanks for your
help Dan
You can call Craters and Freighters
At 10:13 AM 09/17/2001, you wrote:
I
am looking for a Diablo hood decal for the 78 Caballero Diablo, on the
one I am restoring. Any suggestions? Phoenix Graphics and Stencils and
Stripes do not have one and I have gone through all the usual places on
the web.
You might try this link ...
At 08:40 PM 09/17/2001, you wrote:
I didn't think GM had
that information. They had always said you can't prove
engine, SS, trans. etc. Did they find all of this
stuff?
It's the same thing as what the dealer had in his book. It documents the
year's colors, options, etcnot your exact car.
To
Replies to this message are sent to The Chevelle Mailing List
So far only 57 mine included .
82 now and I just sent the link to twenty others and 3 listsit'll grow
fast.
The Hannas
2 Elks Ranch
Replies to this message are sent to The Chevelle Mailing List
At 06:26 PM 09/16/2001, you wrote:
Replies to this message are sent to The Chevelle Mailing List
At 10:40 PM 09/16/2001, you wrote:
What is this
information packet?
It's a restoration packet that describes all options and specs for your
year carit's free from GM and contains a wealth of information.
The Hannas
2 Elks Ranch
Replies to this message are sent to The Chevelle Mailing List
I understand your feelings completely. I think most of us have felt the
same. But Nuclear weapons are must be ALWAYS be used as a last resort.
They have worked
Replies to this message are sent to The Chevelle Mailing List
I just thought it was something else to share.
Pretty cool pic...could be Osama himself:)
The Hannas
2 Elks Ranch
Replies to this message are sent to The Chevelle Mailing List
At 10:37 PM 09/13/2001, you wrote:
Replies to this message are sent to The Chevelle Mailing List
We have been
But
that's tough.
Ted Nugent
Thanks for sending this...he's right on the money in my book
too!
The Hannas
2 Elks Ranch
Replies to this message are sent to The Chevelle Mailing List
I do not think that it is right for anyone in the United States to bad mouth
OUR PRESIDENT.
I agree with this 1000%. Regardless of personal opinions, this was an act
of
At 07:59 AM 09/13/2001, you wrote:
To
all,
I will apologize in advance for
my rantings.
No apology necessaryvery well said.
The Hannas
2 Elks Ranch
Replies to this message are sent to The Chevelle Mailing List
Plz keep your opinions short as I have too much E-Mail concerning
the attacks on this list.
As with most off topic posts...the posts that complain about the off topic
Replies to this message are sent to The Chevelle Mailing List
At 08:56 PM 09/13/2001, you wrote:
Replies to this message are sent to The Chevelle Mailing List
Check this
Replies to this message are sent to The Chevelle Mailing List
I filled up early in the afternoon. $1.64 for fear of a hike. Later in the
evening the gas station lines were long and the supermarkets busy in NE
Ohio.
Cleveland mayor
Replies to this message are sent to The Chevelle Mailing List
I hope none of you have any relatives in the WTC or Pentagon today. I got
up late and have been watching CNN and others to keep up with this tragedy.
This is very
Replies to this message are sent to The Chevelle Mailing List
Everything seems to be quiet here in downtown Brooklyn. The wreckage is
still burning, and another 50 story building collapsed about a half hour
ago.
You're very close to
Replies to this message are sent to The Chevelle Mailing List
At least 4 more
highjacked planes are still unaccounted for.
Makes you wonder where they were headed...I'm sure they were shot down...my
guess is the White House would
It's probably those damn Arab
SOB's. Funny how it is a day before the arab
that bombed the WTC in 93 was scheduled to be sentenced. Time to
send the B5
Bombers over there. And also, if this country doesn't consider this
an act
of war, then i think we have issues. Sorry to vent like this but
Replies to this message are sent to The Chevelle Mailing List
ck the gas prices in your town rumor is in Arkansas and Omaha gas has
already went to $4.00 and $3.00
You won't see that happen unless we carpet nuke the Middle
Replies to this message are sent to The Chevelle Mailing List
So are the twin towers the TWo Brothers? Seems a reach.
You have to remember they talked in riddles in the early years of
writing...look at the bibleanyone
Replies to this message are sent to The Chevelle Mailing List
I'm gonna unsub for a couple of days 'til we get the 'puter back up in the
new world. Can't wait to relieve myself of slow traffic and bad polka/rap
music blasting the
Replies to this message are sent to The Chevelle Mailing List
Very nicely done...worth the wait I'd say!
The Hannas
2 Elks Ranch
-
To Unsubscribe please visit
they
didn't make a 61 el camino only 59-60.
Yep you're rightI'm gettin' old (or this move is making me
crazy...pick one!)
The Hannas
2 Elks Ranch
They have
real low aspect ratios (narrow side walls).
I have observed the bicycle wheels crowd lately growing in
numbers. They get the largest wheel diameter that will fit and put the
lowest aspect ratio tire on them. Not only does this look really weird,
but seems to me it can be very
Replies to this message are sent to The Chevelle Mailing List
a. P235/60R15= all four tires, or:
My vote for a daily driverall four the same and a spare to match. I
have this combo on my Elky and it handles well.
b.
Kelly:
the best one I've seen was an import driving on four (get this) spare
saver
tires! lol, i damn near hit a parked car when i saw it and had to go
around
the block to confirm.
Now that takes the cake! Wonder if it was on purpose!?!?! It seems that
young drivers are getting
Replies to this message are sent to The Chevelle Mailing List
Are the frames for the 70-73 Monte Carlo the same as for the 68-72 A
body cars?
Can't answer that one, but something tells me no...it was longer
if yes, then why does it
At 05:35 PM 08/26/2001, you wrote:
No problem.
You gotta love urban legends. So, has anyone seen Susquach lately?
I'm moving to the woods in less than a week...I'll keep the digi-cam
handyyou never know!
The Hannas
2 Elks Ranch
Replies to this message are sent to The Chevelle Mailing List
Just wondering if not being able to rotate radials side to side is nonsence.
I remember that...it had to do with the steel belts and once they go one
way, they don't
Replies to this message are sent to The Chevelle Mailing List
Welcome, its always good to have another elky on the list.I don't
think that there is an active chevelle club in texas. The LoneStar Club
out of DF-W seems to have
Replies to this message are sent to The Chevelle Mailing List
I don't know where this myth keeps coming from, as the factory owners
manuals on all the vehicles I've owned for the past couple of decades
that all came from the factory
Replies to this message are sent to The Chevelle Mailing List
JIM - That is the problem.
Never bought a new one myselfnever could see spending that much money
for a car...only had car payments three times since 1972
The
We
posted 20 new current pictures yesterday.
Hey, that's looking good Josh! I like that color combo, it's one of my
favorites. Looks like you've been doing a great job on the car.and I
can't wait to see the finished photos!
I'm hoping that when I get to East Texas, I can find a 70-72 SS
Kelly:
you up and running?
Between moving things and running the road, you wouldn't think so, but
I'm still here. Gonna make another trip tomorrow night, then one more
week in Big Dbefore departing for the Ranch for
the duration.
My Elky needs a new carb...five years is good for an Edelbrock
Replies to this message are sent to The Chevelle Mailing List
For future reference, could you tell me which shipping company you're
referring to?
Dependable Auto Shippers...I can't find the phone number or link, but
that's who
Replies to this message are sent to The Chevelle Mailing List
I decoded my cowl tag and VIN for kicks today. It got me thinking. How was
production handled in '69? Like today we get the new model year starting in
september or so.
Replies to this message are sent to The Chevelle Mailing List
At 01:27 PM 08/13/2001, you wrote:
Replies to this message are sent to The Chevelle Mailing List
My firewall
Replies to this message are sent to The Chevelle Mailing List
I'm going to be removing a factory '68 intake (3919803)
from a 350 and replacing it with an Edelbrock Performer.
Anyone feel strongly about the gaskets I should use and/
Replies to this message are sent to The Chevelle Mailing List
PS. i hate imports
Honda's are for young girls who know no better.(and ricer racers)
Kelly Jana Hanna
2 Elky 350/350's
4 weeks til East Texas
Replies to this message are sent to The Chevelle Mailing List
At 02:44 AM 08/10/2001, you wrote:
Replies to this message are sent to The Chevelle Mailing List
Hi Rob,
The car- 1979
Chevrolet El Camino w/ v-6 and ? auto-trans, motor and trans
removed by previous owner.
The motor- 1986? Buick Regal v-8 w/ ? auto-trans. Was purchased
from
neighbor who got it out of his rolled low rider.
I didn't know they drove fast enough to roll anything:)
I want to put
Replies to this message are sent to The Chevelle Mailing List
While cleaning out the garage this past weekend I found the powerglide
that I took out of a 67 Camero. Not sure if original to 67 or not. It
was working fine when I
Replies to this message are sent to The Chevelle Mailing List
Are we talking 2 speed Powerglides here?
Not sure there's another kind of PG
I don't much see the value in that
for racing. I would think you would want some more
Replies to this message are sent to The Chevelle Mailing List
Check out my website on the 70 I built
Very nice looking motor ( car)...I'd love to have the Elky version!
Kelly Jana Hanna
2 Elky 350/350's
4 weeks til East Texas
Replies to this message are sent to The Chevelle Mailing List
Hi All,
I'm not new to chevelle's but am new to this list. Not sure if I have
it right. I have been on many forums but they are not set up like
this. Does everyone on
Just curious why you
are looking for specifically a 2-bolt and not a
4-bolt?
It's been said by more than a few people that the two bolts are actually
stronger at the caps because there's more area on them. Lots of people I
know are running them...probably cause there's more of them out
there.
I
Replies to this message are sent to The Chevelle Mailing List
Questions! From these and other discussions I know that the
internals on
the 200-4R trannys are not all the same, with the GN and MCSS-spec ones having
the better
Replies to this message are sent to The Chevelle Mailing List
A related but funny story. The 17-year-old kid who lives
next door to my brother buys a supposed mid-12 sec 5.0 Mustang
(actually, his old man bought it for him and
Replies to this message are sent to The Chevelle Mailing List
I know this is a little off topic here, but what is the best way to deal with
a poser. Especially a 15 year old that likes F$ds and likes to instant
message you
Replies to this message are sent to The Chevelle Mailing List
Here's my thought on the 200r4. Talking to my mechanic who specialize's in
Buick GN said there are 2 different types of 200r4's. The POS one that
were on cutless, monte
Replies to this message are sent to The Chevelle Mailing List
I just have 1 question on this issue. Where is everyone getting these
outrageous prices on tranny rebuilds?? The TH350 in my 86 Cutlass cost me
$300 and the TH400 in the
At 10:23 PM 07/26/2001, you wrote:
mines for
reverse threads only
?discussion backwards on only Works
Kelly Jana Hanna
Still two Elkys
5 weeks til East Texas
Red Rocks Country
At 07:08 AM 07/25/2001, you wrote:
Comfortable?
No. Not at all. In fact, I don't think I've ever cruised 70mph with my
Chevelle w/ a 4:10 rear. At 50mph, I'm doing about 2800rpm, 60mph is
about 3100rpm. That's about the limit for cruising for me anyway.
If I were you, and you do 70mph cruising
Replies to this message are sent to The Chevelle Mailing List
At 09:02 AM 07/25/2001, you wrote:
Replies to this message are sent to The Chevelle Mailing List
kelly, im
At 09:09 AM 07/25/2001, you wrote:
with
either 3-speed auto or 4-speed stick the last gear is the same. O.D. is
To clarify...TH-350's and 400's and any four speed have a 1.00 to 1 ratio
in third or fourth gear. OD trannies have a .67 to 1 (or similar) final
gear ratio.
Kelly Jana Hanna
Still
Replies to this message are sent to The Chevelle Mailing List
At 09:49 AM 07/25/2001, you wrote:
Replies to this message are sent to The Chevelle Mailing List
I don't know
Trevor
Welcome to the list.
Yessir, welcome to the list
I see that your questions
have been pretty well
covered, so I'd just say that we are all here for you and any time
you
wanna talk chevelles, just get on line. Heck we'll talk to anyone -
just
look at our roster, yankees,
rednecks
I'm
Replies to this message are sent to The Chevelle Mailing List
They got Red Rocks there
Lot of red clay here in Georgia - caused by high metal content - therefore
rust...Denny/Ga
And from Rust you get Neil Youngalso high metal
Replies to this message are sent to The Chevelle Mailing List
Ok, guys and girls,
I decided to give this a try. I put together a forum on EZ Board to see if
we could set up a board for the
discussion of vendors and suppliers and
Replies to this message are sent to The Chevelle Mailing List
The 69 guys? What kind of list is this anyway? Yuk, Yukcouldn't resist
that one boys and girls...
Kelly Jana Hanna
Still two Elkys
6 weeks til East Texas
They got
Replies to this message are sent to The Chevelle Mailing List
At 12:01 AM 07/24/2001, you wrote:
Replies to this message are sent to The Chevelle Mailing List
Hey, Kelly-
At 12:23 AM 07/17/2001, you wrote:
Here's a link to my
new website that has some photos of my Malibu on it. Hope you all like
it.
Very nice car...get it outta da rain, man!
Kelly Jana Hanna
Red Rocks (Rust list)
Two SS (Elky, Malibu Chevelle lists)
Replies to this message are sent to The Chevelle Mailing List
I obviously missed something but this is a pretty funny tread.
Made In China was the general funny we were shooting for
Kelly Jana Hanna
Red Rocks (Rust list)
Replies to this message are sent to The Chevelle Mailing List
At 12:41 AM 07/15/2001, you wrote:
Replies to this message are sent to The Chevelle Mailing List
in Mexico.
Replies to this message are sent to The Chevelle Mailing List
I've just finished a new web page for my Elky. It's not real fancy but I
did put some recent photos on it.
Great looking Elky man! Love that WAV too...I see you
Replies to this message are sent to The Chevelle Mailing List
Sounds like good news to me. If he had problems/complaints, believe me
you'd hear about it.
You got a good point there...ok I feel better now~!
Kelly Jana Hanna
Red
Replies to this message are sent to The Chevelle Mailing List
I have an opportunity to purchase a recently rebuilt 700R4 trans. It is out
of a '89 S10 4x4 powered by a 4.3L V6.
What questions should I ask? Do I need a
At 09:16 PM 07/13/2001, you wrote:
I remember someone
posting a msg awhile back saying that it was a mistake to have straight
pipes coming off the headers.
Like you needed two bends or something to keep it from
resonating...anyone remember this? Reason I ask is cuz I want to
put straight pipes
At 01:04 PM 07/14/2001, you wrote:
. they cost me three
times as much
but i don't have to worry about getting stuck in the middle of bum
f##cked
Egypt because of some Chinese junk.
Larry
Hey, Chinese junk...that's
pretty funny !!!
When they call there own ships junks.well you see the
1 - 100 of 147 matches
Mail list logo