show in Chicago. Any help sorting this out would be
mucho appreciated .
Kent Lewis
'68 Malibu ZZ502/502
ACES #5102
r a upcoming large indoor show in Chicago. Any
help sorting this out would be mucho appreciated
.Kent
Lewis'68 Malibu ZZ502/502ACES
#5102
DITTO !
Kent
'68 Malibu ZZ502/502
ACES #5102
- Original Message -
From:
[EMAIL PROTECTED]
To: Chevelle-list@chevelles.net
Sent: Sunday, July 31, 2005 9:07 PM
Subject: Re: [Chevelle-list] 68-69 hood
insulation falls out
I just put mine in place when I put
Title: Message
I was not going to respond to this thread
when it came up. Because Mom always said "If you don't have something
nice to say...then don't say ANYTHING !" Well, I will try to
explain my point of view, through the computer keyboard, and hopefully not
insult anybody along the
John,
On my '68 frame there are 8 holes per side. Counting from the front of
the car - you'll need to use holes #6 #7.
Kent
'68 Malibu ZZ502/502 (TH400)
ACES #5102
- Original Message -
From: John Usher [EMAIL PROTECTED]
To: The Chevelle Mailing List
had one on each of my buddys alky big blocks in
a super comp dragster and they were great tune.
I had a walk around in their shop and its all top notch.
www.blp.com
Have Fun!
André - Tigergutt
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Kent Lewis
Sent
Looking to have some carb work done. I've read articles about the
Carburator Shop for years in all the major magazines. Apparently, the owner
Brad Urban (?), died and his wife closed the business. Two guys working
there decided to open another business, and call it the Carb Shop. Just
I've had good luck catching mice in the garage using peanut butter as the
bait on the old wooden wire mouse traps. The more they lick it, the sooner
they GET IT !!! :)
Kent
'68 Malibu ZZ502/502
ACES #5102
- Original Message -
From: Krister Meister [EMAIL PROTECTED]
To: The Chevelle
Dennis,
Sure sounds like a dead battery to me.
Kent
'68 Malibu ZZ502/502 :)
ACES #5102
- Original Message -
From: Dennis Kiernan [EMAIL PROTECTED]
To: Chevelle-list Chevelle-list@chevelles.net
Sent: Saturday, March 05, 2005 1:30 AM
Subject: [Chevelle-list] Electrical mystery
This is a
Kyle,
A "post" car or sedan, means that
there would be a metal frame surrounding the driver passenger side
windows, as well as a frame for the rear side windows. "Post" cars were
normally the cheaper versions of the Chevelles. Much less common than the
non-post or coupe.
Kent
'68 Malibu
. Each side has one or two pipes with "dimples"
for clearance.
Kent Lewis
'68 Malibu
ZZ502/502
ACES #5102
- Original Message -
From:
Herb Lumpp
To: The Chevelle Mailing List
Sent: Saturday, February 19, 2005 6:59
AM
Subject: [Chevelle-list] Issues w/
a
Kent Lewis
'68 Malibu
ZZ502/502
ACES #5102
- Original Message -
From:
Phil
Adams
To: Chevelle-list@chevelles.net
Sent: Friday, February 18, 2005 11:13
AM
Subject: [Chevelle-list] Stock 67 rear
end largest wheel size
I am going to be
changing
Thanks Bill ! We just sold our home, moved
across town into a rental, until our new home is finished.Was having
withdrawals from beingwithout a computerfor 2 weeks. Hope I
didn't miss a good ebay auctions. Anyways, it
isGREAT to be back on the list.
:)
Kent Lewis
'68 Malibu
ZZ502/502
Bill,
As you may already know, the same wheel cover was used on the Malibu. The
only change being the medallion in the center. And, the SS396 medallion
is/was being reproduced. Although, I do not know how close the reproduction
is to the original.
Kent
'68 Malibu ZZ502/502
ACES #5102
-
Dennis,
Sounds like you are referring to the glove box liner. If so, then for a
'68 Chevelle w/air you will want the molded plastic/fiberglass (?) liner.
It will screw into the inside of the glove box door, where as a non a/c
liner is cardboard and (I believe) mounts at the rear hinge for the
BL,
Are you using synthetic or petroleum based power steering fluid ? Talked
with a shop today that makes up hydraulic hoses, and mentioned my problem.
He said it was because the synthetic fluid is dissolving the rubber, and
that in order to use synthetic fluid, you have to use a special
Thanks Walt. Would rather keep the original style hose. Still trying to
figure out if the synthetic is what is causing the problem.
Kent
'68 Malibu ZZ502/502 :)
ACES #5102
- Original Message -
From: [EMAIL PROTECTED]
To: The Chevelle Mailing List [EMAIL PROTECTED]
Sent: Wednesday,
On my '68 BB which has the remote reservoir for the power steering fluid
(mounted on the radiator support) - there is a hose which connects the
reservoir to the pump mounted on the engine. The fluid appears to be
bleeding/weeping through the pores in the rubber. It was a brand new GM
hose
Larry,
Do you still have my number ? If not
contact me off list. [EMAIL PROTECTED]
Kent
'68 Malibu ZZ502/502 :)
ACES 5102
- Original Message -
From:
[EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, November 08, 2004 11:07
PM
Subject: Re:
Larry,
Just read your message. I work in the
South Bend area. What do you need, maybe I can help ?
Kent
'68 Malibu ZZ502/502 :)
ACES #5102
- Original Message -
From:
[EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Saturday, November 06, 2004 2:37
AM
Subject:
Dave,
Would an original '68 sending unit help you out ? It is still very solid,
little surface rust. Probably still works, but just for piece of mind I
replaced it. You are welcome to this one if it will help. :)
Kent
'68 Malibu ZZ502/502
ACES #5102
- Original Message -
From: Dave
Bill,
Were those horns that you got from the dealer for your '68 ? If so, how
close in appearance do they look to the originals ? Do you have the part
numbers ?
Thanks.
Kent
'68 Malibu ZZ502/502
ACES #5102
- Original Message -
From: Bill Lessenberry [EMAIL PROTECTED]
To: [EMAIL
Bill,
Thanks for the heads-up about the dealer horns. I'll look into
rebuilding them.
P.S. Tried to view your webpage - expired ?
Thanks again,
Kent
'68 Malibu ZZ502/502
ACES #5102
- Original Message -
From: Bill Lessenberry [EMAIL PROTECTED]
To: The Chevelle Mailing List
I just recently sorted out my '68 tilt column
(floor shift) w/walnut wheel. Maybe I can help. If you want to
contact me off line I'll give you my phone number. [EMAIL PROTECTED]
Kent
'68 Malibu ZZ502/502
ACES #5102
- Original Message -
From:
[EMAIL PROTECTED]
To:
That is an AWESOME commercial...of course the music may have helped a bit.
:)
Kent
'68 Malibu ZZ502/502
ACES #5102
- Original Message -
From: Herb Lumpp [EMAIL PROTECTED]
To: Chevelle List [EMAIL PROTECTED]
Sent: Saturday, August 14, 2004 6:53 PM
Subject: [Chevelle-list] New C6
Posted this over at Team Chevelle:
Have a question about the correct placement of the chrome knob for the
windshield wiper motor switch on the dash of my '68 Malibu. With the key in
the ignition, and turned to accessory, the wiper motor is OFF when the
chrome knob is sitting horizontal - PUSH
Bill,
Thanks. Guess the 9 + years it has taken me to reassemble the car has
taken it toll on the ol' memory. Still it seems as though, the chrome knob
would look more symmetrical with the other knobs if it was vertical at
rest.
Thanks again,
Kent
'68 Malibu ZZ502/502 :)
ACES #5102
-
NICE...VERY NICE !!!
Kent
'68 Malibu ZZ502/502
ACES #5102
- Original Message -
From:
Cutter
To: [EMAIL PROTECTED]
Sent: Saturday, July 24, 2004 2:19
PM
Subject: [Chevelle-list] New Wheels
What do you all
think?
Anyone have a recommendation or experience with a good coil-over shock ? I
am leaning towards this system:are engineered from the ground up to offer
unmatched performance for stock GM front ensist of shocks and springs
designed specifically for this suspension style.
utilizes coil
/clint_hooper.htm
- Original Message -
From: Kent Lewis [EMAIL PROTECTED]
To: The Chevelle Mailing List [EMAIL PROTECTED]
Sent: Friday, July 23, 2004 7:00 PM
Subject: [Chevelle-list] coil over shocks
Anyone have a recommendation or experience with a good coil-over shock ?
I
am leaning
Not much of a webpage designer, but I was able to post a few photos of my
'68 Malibu over at CarDomain.com . Here is the address to view the pictures
I posted : http://www.cardomain.com/id/backn68
Kent
'68 Malibu ZZ502/502
ACES #5102
on the web...
That's a nice lookin' ride. Is that Hugger Orange, or is it red with a
light wash from the flash?
SARGE
-Original Message-
From: Kent Lewis [mailto:[EMAIL PROTECTED]
Sent: Monday, June 28, 2004 5:41 AM
To: The Chevelle Mailing List
Subject: [Chevelle-list] pictures
Oh, something touse
with"recreational
substances"...
Kent
'68 Malibu ZZ502/502
ACES #5102
- Original Message -
From:
Bill Bradley
To: The Chevelle Mailing List
Sent: Monday, June 28, 2004 11:34
AM
Subject: Re: [Chevelle-list] Vette group
posting
Title: RE: [Chevelle-list] Vette group posting
Now that's a "visual image" that I didn't
need stuck in my head.
Kent
'68 Malibu ZZ502/502
ACES #5102
- Original Message -
From:
Craig A. Ellis
To: 'The Chevelle Mailing List'
Sent: Monday, June 28, 2004 3:35 PM
Matt,
The best price I found was at http://www.gmpartsdirect.com Look up the
part number 12371244 . The price is $244.80 plus $19.95 s/h = $264.75 .
You can also look at www.paceperformance.com I have their catalog and
found the GM part number. The BLACK Powder Coated part number is
Title: Re: [Chevelle-list] Just got back
Chuck,
Have the dates for CB2005
been picked out yet ?
Kent
'68 Malibu ZZ502/502
ACES #5102
- Original Message -
From:
Chuck Hanson
To: The Chevelle Mailing List
Sent: Friday, June 11, 2004 9:18 AM
Subject: Re:
Scott,
Here is a link to MAD Electrical :
http://www.madelectrical.com/electrical-tech.shtml
Look under Brighter Headlights . I did this upgrade to my '68 and no
longer have yellow headlights. Works GREAT !
Kent
'68 Malibu ZZ502/502
ACES #5102
- Original Message -
From: Scott
: Kent Lewis [EMAIL PROTECTED]
To: The Chevelle Mailing List [EMAIL PROTECTED]
Sent: Friday, June 11, 2004 2:34 PM
Subject: Re: [Chevelle-list] Headlights
Scott,
Here is a link to MAD Electrical :
http://www.madelectrical.com/electrical-tech.shtml
Look under Brighter Headlights . I
Charles,
It is your choice. Depends on the look that you want. On my 502 I
have one side plugged, the other feeds the engine at 7 psi.
By the way, nice choice on the regulator. :)
Kent
'68 Malibu ZZ502/502
ACES #5102
- Original Message -
From: 65ss.com [EMAIL PROTECTED]
To: The
Clint,
You may try Baymount Inn (615)851-1891 as I
just got off the phone with them as I had to cancel my reservations for this
year.
Kent
'68 Malibu ZZ502/502
ACES #5102
- Original Message -
From:
Clint Hooper
To: The Chevelle Mailing List
Sent: Monday, May 24,
Thats a good price. My room was quoted at $79 a night.
Larry:
Yeah me too. But there is always next year !!
- Original Message -
From: [EMAIL PROTECTED]
To: The Chevelle Mailing List [EMAIL PROTECTED]
Sent: Monday, May 24, 2004 9:56 AM
Subject: Re: [Chevelle-list] CHEVELLABRATION
Jim,
The difference that I see between the two being that the a/c door will
have 4 small screw holes on the inside of the door to attach the
plastic/fiberglass (?) glovebox liner to the door. The top set of holes
are approximately 3 3/4 from the top inside edge of the glovebox, about 9
1/2
Jim,
That is a GOOD IDEA !
Kent
'68 Malibu ZZ502/502
ACES #5102
- Original Message -
From: Jim Hunter [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, May 03, 2004 6:26 PM
Subject: [Chevelle-list] Re: cooling bottle
What we did on our 69 was to leave the original windshield
Donnie,
I would recommend visiting http://www.yenko.net/ubbthreads/ubbthreads.php?Cat.
You will probably have to register a username to use the board, but there are
some real heavy hitters that frequent this board. Rare, date
coded, and unobtanium, etc. can usually be found with a request
Hello Everyone - I know my husband is too humble to
say anything, but after 9 VERY LONG YEARS of restoring his 68
Chevelle - he just fired it up and the paintings on our walls are shaking.
I just wanted him to know how proud weare of him and his beautiful car -
it is really awesome!
Great
Fred,
Hello. I'm not sure which year of Chevelle you have, but you may be
interested in the products from BMR. I have the lower and the adjustable
uppers on my '68 from BMR, and am very pleased with the quality and fit.
Here is the link: http://www.bmrfabrication.com/A-Body.htm
Kent
'68
Have not looked up the casting number, but the
E 14 8would bethe date code and that would
typically decode as E =May 14
1968.
Hope this helps. :)
Kent
'68 Malibu ZZ502/502
ACES #5102
- Original Message -
From:
ronnie,
a.k.a. rocko
To: [EMAIL PROTECTED]
Sent:
Andre,
You should have 5 bolts and 2 hockey pucks per side on a '68 coupe. :)
(10 bolts/4 pucks total)
Also, thanks for the photos of the front suspension. Looks like a lot of
hard work. Looking forward to seeing pictures of the finished product !
Kent
'68 Malibu ZZ502/502
ACES #5102
pictures as work proceeds, I'll ask a buddy help me to
set up a website sooner or later I think.
Thanks!
Full Revs!!!
:o)
André
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Kent Lewis
Sent: 4. mars 2004 21:49
To: The Chevelle Mailing List
Subject: Re
The chrome mylar (?) strips that run vertical from the vent windows on my
'68 are in need of some type of adhesive to reattach the ends where it tucks
behind the door panel. The strips appear to have been heat sealed to the
door panel originally (PUI reproductions) but have come loose. Anyone
Andre,
I would like to see the pictures. You can send them to
[EMAIL PROTECTED]
Thanks.
Kent
'68 Malibu ZZ502/502
ACES #5102
- Original Message -
From: Tigergutt [EMAIL PROTECTED]
To: 'The Chevelle Mailing List' [EMAIL PROTECTED]
Sent: Tuesday, March 02, 2004 4:46 PM
Subject: RE:
Donnie,
Contact me off the list at [EMAIL PROTECTED]I will
help.
Kent
'68 Malibu ZZ502/502 (virgin engine :)
ACES #5102
- Original Message -
From:
[EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, February 19, 2004 4:51
PM
Subject: [Chevelle-list]
Pete, I'm with you. A lot of the selection depends on the type of rims.
Polished Centerlines - call for blackwalls, factory steel rims with dog dish
caps - blackwalls. Aftermarket, aluminum rims = blackwalls. Corvette
rally wheels - B.F. Goodrich T/A RWL showing. :)
Kent
'68 Malibu
Andre',
Perhaps I can help with the photos of the hood. You can send them to me
off line at [EMAIL PROTECTED] .
Kent
'68 Malibu ZZ502/502
ACES #5102
- Original Message -
From: Tigergutt [EMAIL PROTECTED]
To: 'The Chevelle Mailing List' [EMAIL PROTECTED]
Sent: Saturday, February 14,
Title: Message
Looks like all is quiet
Kent
'68 Malibu ZZ502/502
ACES #5102
- Original Message -
From:
Fruhauf Kerry A SSgt 3
CS/SCBS
To: The Chevelle Mailing List
Sent: Thursday, February 12, 2004 10:44
AM
Subject: [Chevelle-list] Quiet
yesterday
Have not heard of Turbo
Rear...what is it ?
Kent
'68 Malibu ZZ502/502
ACES #5102
- Original Message -
From:
Wayne
To: The Chevelle Mailing List
Sent: Friday, January 30, 2004 10:08
AM
Subject: [Chevelle-list] Z-16 in Hot
ROD
This months issue of
http://insiderslist.com/viewads/viewads.cgi?AD_NUMBER=AM2821
Kent
'68 Malibu ZZ502/502
ACES #5102
Tony,
Have you tried any local machine shops ? Might be able to score a good
deal. :)
Kent
'68 Malibu ZZ502/502
ACES #5102
- Original Message -
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tuesday, January 13, 2004 1:17 PM
Subject: [Chevelle-list] Rear Main Bearing Cap
http://insiderslist.com/viewads/viewads.cgi?AD_NUMBER=AM2778
Look at link 1 thru 5. Nice looking car for
$10,500.
Kent
'68 Malibu ZZ502/502
ACES #5102
Looks like a '68 to me.
:)
Kent
'68 Malibu ZZ502/502
ACES #5102
- Original Message -
From:
[EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tuesday, December 23, 2003 1:26
AM
Subject: Re: [Chevelle-list] Christmas
comes early... wahoo!
Can't wait to see the
Yes. The seats are in the car and they still
have the original covers on them. :)
Kent
'68 Malibu ZZ502/502
ACES #5102
- Original Message -
From:
[EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Sunday, December 07, 2003 9:25
PM
Subject: Re: [Chevelle-list] [OT]
Now THAT WAS FUNNY !!! :)
Kent
'68 Malibu ZZ502/502
ACES #5102
- Original Message -
From: John Nasta [EMAIL PROTECTED]
To: Chevelle List [EMAIL PROTECTED]
Sent: Sunday, December 07, 2003 5:42 PM
Subject: [Chevelle-list] [OT] Parking ticket
I went to the store today, and I was in
John,
Thanks for the referral. But what I am
wanting to do is have new ends made from stainless, so I still need an original
hose to use as a template for the ends.
Kent
'68 Malibu ZZ502/502
ACES #5102
- Original Message -
From:
John Nasta
To: The Chevelle Mailing
Pete,
Look like 1967 Chevelle caps to me. :)
Kent
'68 Malibu ZZ502/502
ACES #5102
- Original Message -
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday, November 19, 2003 5:53 AM
Subject: Re: [Chevelle-list] '67 NOS dog dish caps on ebay
From: Kent Lewis [EMAIL
Rich,
There are people on ebay that are not exactly "knowledgable"
about the items they are selling. Such as the frequent use of the acronym
NOS when describing the condition of the part(s). Have
seen the term used to describe absolute junk ! Having
said that, you as the buyer must ask
] Dog dish
caps
I wrote him
before I placed a bid and asked him specific questions as to the condition of
the hub caps. That's why I bid on them.I also wrote the seller twice after I
had received the caps and he won't answer.
Rich
- Original Message -
From:
I'm looking for an original GM power steering hose for a '68
BB Chevelleapplication. This would be for the high pressure side
(hose with tubing and fittings on both ends). Would prefer a good used one
to use as a "template" to have a new one made. Would be willing to return
the used hose,
Thanks Bill and Fred !!! I'm hot on the trail
again. :)
Kent
'68 Malibu ZZ502/502
ACES #5102
- Original Message -
From:
Fred
Knoche
To: 'The Chevelle Mailing List'
Sent: Wednesday, November 19, 2003 8:02
PM
Subject: RE: [Chevelle-list] Looking for
'68 BB
Trooper,
VERY sorry I didn't mention this to the Chevelle board sooner, but have
been following this thread over on the Yenko board (long discussion):
http://www.yenko.net/ubbthreads/showflat.php?Cat=Board=UBB5Number=54268page=0view=collapsedsb=5o=fpart=1
Kent :(
'68 Malibu ZZ502/502
ACES
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItemitem=2443638415category=34204
Thought someone might want to look at this auction :)
Kent
'68 Malibu ZZ502/502
ACES #5102
Graham,
06E = 06 month (June), E= 5th week of the month (A=1st,B=2nd,C=3rd, etc.)
Not sure about the 9513.
Hope that helps :)
Kent
'68 Malibu ZZ502/502
ACES #5102
- Original Message -
From: Graham Wooden [EMAIL PROTECTED]
To: 'The Chevelle Mailing List' [EMAIL PROTECTED]
Sent:
-
From:
Kent
Lewis
To: The Chevelle Mailing
List
Sent: 11/7/03 11:52:50 PM
Subject: Re: [Chevelle-list] 1970
Chevelle Malibu
Where abouts in NW Indiana are you from ? I'm
just outside of Westville :)
Kent
'68 Malibu
ZZ502/502
Where abouts in NW Indiana are you from ? I'm
just outside of Westville :)
Kent
'68 Malibu ZZ502/502
- Original Message -
From:
Zieg72
To: The Chevelle Mailing List
Sent: Friday, November 07, 2003 3:28
PM
Subject: [Chevelle-list] 1970 Chevelle
Malibu
Thought this was a neat idea ! If you follow
the thread, costs $5 and you get 4 custom messages.
http://www.chevelles.com/forum/ultimatebb.php?ubb=get_topic;f=31;t=002576
Kent
'68 Malibu ZZ502/502
ACES #5102
Title: Hot Wheels for Sale
Dale,
Would you send me a copy please
?
Kent
'68 Malibu ZZ502/502
ACES #5102
- Original Message -
From:
Dale McIntosh
To: Chevellelist
Sent: Saturday, August 09, 2003 8:01
PM
Subject: [Chevelle-list] Hot Wheels for
Sale
I believe the reverse flow water pumps are used
with the serpentine belt systems.
Kent
'68 Malibu ZZ502/502
ACES #5102
- Original Message -
From:
[EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday, July 30, 2003 3:19
AM
Subject: Re: [Chevelle-list]
Thomas,
You will need to view this site http://www.chevelles.com/lists/
there are instructions on how to un-subcribe from the list. There is noone
to do it for you.
Kent
'68 Malibu ZZ502/502
ACES #5102
- Original Message -
From:
THOMAS WILLIAMS
To: [EMAIL PROTECTED]
___
Chevelle-list mailing list
[EMAIL PROTECTED]
http://chevelles.net/mailman/listinfo/chevelle-list_chevelles.net
___
Chevelle-list mailing list
[EMAIL PROTECTED]
http://chevelles.net/mailman/listinfo/chevelle-list_chevelles.net
Trooper,
I purchased a set of adjustable upper control arms from BMR Fabrication.
Very heavy duty, nice quality, and I now have more clearance for my 3
exhaust system.
Here is there website http://www.bmrfabrication.com/A-Body.htm
Kent
'68 Malibu ZZ502/502
ACES #5102
- Original Message
___
Chevelle-list mailing list
[EMAIL PROTECTED]
http://chevelles.net/mailman/listinfo/chevelle-list_chevelles.net
Jim,
According to my resources the
part number for '69300 nameplate is 3952499
R/L. If you are interested in NOS, try contacting GM
MUSCLE CAR PARTS INC. Palos Hills, IL. 1-708-599-CARS
(2277) ask for Dan Leahy.
Kent
'68 Malibu ZZ502/502
ACES #5102
- Original Message -
George,
Sounds like you found the casting date for
the center section C216 -March 21,
1966.
Kent
'68 Malibu ZZ502/502
ACES #5102
- Original Message -
From:
George Spatta
To: [EMAIL PROTECTED]
Sent: Thursday, July 03, 2003 10:14
PM
Subject: [Chevelle-List]
Chad,
Sorry to here that you will be selling your Chevelle. As far as your
new address, it should probably read comcast.net - not - .com . Just
changed over myself. :)
Kent
'68 Malibu ZZ502/502
ACES #5102
- Original Message -
From: Chad P. [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
testing new address
123..
Thanks. :)
Kent
'68 Malibu ZZ502/502
ACES #5102
- Original Message -
From:
[EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, July 03, 2003 2:33
PM
Subject: Re: [Chevelle-List] testing
123
Read you
loud and clear!
-Tim-1966
Chevelle
Then there is:
PONTIAC - Poor Old Numbskull Thinks It's A
Cadilac.
Kent
'68 Malibu ZZ502/502
ACES #5102
- Original Message -
From:
Dan
McIntosh
To: [EMAIL PROTECTED]
Sent: Sunday, June 22, 2003 12:47
PM
Subject: [Chevelle-List] What does
CHEVROLET mean to
Trevor,
Thanks for the reply. Just realized that I failed to list the size of the
engine in my e-mail. I actually received a line on an NOS shroud this
afternoon. I will let you know if it does not pan out.
Thanks again,
Kent
'68 Malibu ZZ502/502
ACES #5102
- Original Message -
I'm looking for a radiator fan shroud for a '68 Chevelle V8 w/AC.
Kent
'68 Malibu ZZ502/502
ACES #5102
- Original Message -
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, June 19, 2003 8:05 PM
Subject: Re: [Chevelle-List] wanted
In a message dated 6/19/03 5:40:29
Looking at either Denny's Nitrous ready 3" steel (?) or
Strange Engineering 3" Chrome-Moly driveshaft for my 502/502. Anyone have
any experience with either of these companys ? Very concerned with
quality, as well as the
balancing of the driveshaft.
Kent
'68 Malibu ZZ502/502
ACES #5102
Last November when I booked our room at Hampton Inn the only room left was a
smoking, king room. I took it, but with the wife and kids going we would
definately prefer a non-smoking room with 2 beds. What type of room did you
book??
Thanks,
Sue
- Original Message -
From: Michael Pell
Gary,
I will second was Gene said about M.A.D. Electrical. Here is the link:
http://www.madelectrical.com/index.shtml
Kent
'68 Malibu ZZ502/502
ACES #5102
- Original Message -
From: Gary Treible [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Saturday, June 07, 2003 11:29 AM
Interesting
Kent
'68 Malibu ZZ502/502
ACES #5102
- Original Message -
From:
Dan
McIntosh
To: [EMAIL PROTECTED]
Sent: Tuesday, June 03, 2003 6:10
PM
Subject: [Chevelle-List] ebay
auction
sorry if this is inappropriate.. just wanted to
share..
John,
The size you need is 5/16-24. Also, sorry to hear about your car.
Kent
'68 Malibu ZZ502/502
ACES #5102
- Original Message -
From: John Nasta [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, June 02, 2003 6:28 AM
Subject: RE: [Chevelle-List] U-joint bolt thread size
I would highly recommend, call DeMoise Trk-ing (864)609-9390.
Kent
'68 Malibu ZZ502/502
ACES #5102
- Original Message -
From:
George Spatta
To: [EMAIL PROTECTED]
Sent: Thursday, May 29, 2003 11:25
PM
Subject: [Chevelle-List] Transport from
CA to FL??
Have read somewhere that from the factory, GM installed 2 metal head gaskets
per head on the 409's.
Kent
'68 Malibu ZZ502/502
ACES #5102
- Original Message -
From: Colt Seavers [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, May 30, 2003 7:43 AM
Subject: RE: [Chevelle-List]
ir carthat would be willing
to help ?
Any help would be GREATLY appreciated, as my
project is "dead in the water" until I can sort this radiator/fan
shroud issue out. :(
Kent
'68 Malibu ZZ502/502
ACES #5102
- Original Message -----
From:
Kent Lewis
To: [EMAIL P
John,
If I can offer a suggestion, call DeMoise Trk-ing (864)609-9390.
Kent
'68 Malibu ZZ502/502
ACES #5102
- Original Message -
From: John Nasta [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday, May 28, 2003 12:39 PM
Subject: RE: going nowhere - was RE: [Chevelle-List] Goin'
Thought I had this whole cooling system
figured out. Ordered a BeCool aluminum radiator (part # 62008) suppose to
be a "custom fit" for a '68 Chevelle (among others). Then ordered a
reproduction '68 BB fan shroud from Ground Up. Then I tried to install the
radiator, the shroud, and the
1 - 100 of 266 matches
Mail list logo