Re: [c-nsp] Unussual bandwidth limit question :) (Cisco ASR1002-X)

Hi Saku. Thnka you very mutch !!! Will go read right now. > On Thu, 17 Dec 2020 at 13:56, Sheremet Roman wrote: >> So, i should read more about QoS? There i can limit speed to X mb/s >> based on BGP community ? > Yes, you should read up on QPPB if that fits y

Re: [c-nsp] Unussual bandwidth limit question :) (Cisco ASR1002-X)

emove ip from exist list used netconf ? > On Wed, 16 Dec 2020 at 17:57, Sheremet Roman wrote: >> Thank you for your time, i just can't understand how i can apply >> received prefixes to my current ACL's. > With QPPB, you don't, with QPPB while processing the BGP NLRI, b

Re: [c-nsp] Unussual bandwidth limit question :) (Cisco ASR1002-X)

Hi, Saku. Thank you for your time, i just can't understand how i can apply received prefixes to my current ACL's. Maybe i explain my config worng, just little more info: I have linux server with web panel for admins/client, and i have cisco ASR with 10Gb/s link to our TPIA provider, we

[c-nsp] Unussual bandwidth limit question :) (Cisco ASR1002-X)

Hi Everyone, Hardware: cisco ASR1002-X (2RU-X) processor (revision 2KP) with 1066632K/6147K bytes of memory. Cisco IOS XE Software, Version 03.16.04a.S - Extended Support Release Cisco IOS Software, ASR1000 Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 15.5(3)S4a, RELEASE SOFTWARE (fc1)

Re: [c-nsp] ASR1002-X + SPA-1X10GE-L-V2 (10gb)

Hi, Yep we change card to brand new and update our IOS, now looks best now: ASR1002#sh platform | in 10G 0/3 SPA-1X10GE-L-V2 ok1w0d But we have one more problem, media errors: ASR1002# sh int TenGigabitEthernet 0/3/0 | in err 227 input errors, 181 CRC,

[c-nsp] ASR1002-X + SPA-1X10GE-L-V2 (10gb)

Hi, We have Cisco ASR1002-X Cisco IOS Software, IOS-XE Software (X86_64_LINUX_IOSD-UNIVERSAL-M), Version 15.3(2)S1, RELEASE SOFTWARE (fc1) IOS XE Version: 03.09.01.S and 10g module SPA-1X10GE-L-V2 So, module wont work, anyone use same? OIR not detect this module automatically but after

[c-nsp] Modify access list via SNMP

Hi, We have ASR 1002 and i want modify access list (add\remove entries) via SNMP, this is possible yet? Can someone show me links where i can get info about this. If you have some examples this will be good also. Thanks. Regards, ___ cisco-nsp

Re: [c-nsp] How to show ADSL customers two different GW!

t vlans (1 for group1, 2 for group2) - set 2 VRFs that match the 2 vlans. - set radius attribute to drop the customers into each vrf. Don't forget to change your routing on the core side - the x's and the y's will be routed differently now.. Hope this helps On 16 September 2010 07:28, Shereme

[c-nsp] Cisco 7204VXR + Load Balancing for l2tp sessions.

Dear All, I have 7204 for l2tp sessions, i have average ~1,5 - 2k users online and 500-700Mb/s bandwidth via this device. Load average ~90-100%, sometime in peak time i have customers disconnected from line, and also device works very slow via SSH. I have another one 7204... same as

Re: [c-nsp] Cisco 7204VXR + Load Balancing for l2tp sessions.

Hi, Yes, it's possible, however that load-balancing has to happen on the LAC - i.e. where the L2TP sessions originate. Once the session hits a 7204 it's too late to do any load-balancing. If you have control over the LAC then you can use radius to load-balance across two different LNSes:

[c-nsp] Found a device, please recommend.

Hi, I want order Cisco device (Layer 3) with 8 SFP ports, i want RUN BGP (4-5 fullview) in it.. so i think 512 - 1024 Mb RAM needed. Device Should be 1U. Please recommend which device will be optimal for this request? Regards, ___ cisco-nsp

Re: [c-nsp] How to show ADSL customers two different GW!

:( Regards, On 17/09/2010 06:36, Sheremet Roman ro...@kharkov.org.ua wrote: Hi David, I think your config will be very helpful for me, big thanks for this, but i look your config and seems i see one more problem in my case.. Look, i have no VRF setuped now... just thinking, i have

[c-nsp] How to show ADSL customers two different GW!

Hello, (From start Sorry for my english guys) I have cisco 7204, l2tp customers, which auth via radius server. So i have Uplink to my CORE router from 7204 with next subnets: x.x.x.0/30 y.y.y.0/30 So, in one physical interface i have two subnets /30 for link (core - x.x.x.1, 7204 -

[c-nsp] How to show ADSL customers two different GW!

Hello, (From start Sorry for my english guys) I have cisco 7204, l2tp customers, which auth via radius server. So i have Uplink to my CORE router from 7204 with next subnets: x.x.x.0/30 y.y.y.0/30 So, in one physical interface i have two subnets /30 for link (core - x.x.x.1, 7204 -

Re: [c-nsp] How to show ADSL customers two different GW!

Hi David, I think your config will be very helpful for me, big thanks for this, but i look your config and seems i see one more problem in my case.. Look, i have no VRF setuped now... just thinking, i have no problem to send attribute to static customers, i just add to rad_reply table