On 10/12/10, Gert Doering wrote:
> Hi,
>
> On Mon, Oct 11, 2010 at 04:35:24PM -0400, Matthew Huff wrote:
>> If the switch doesn't provide layer 3 services (routing) itself, but is
>> really a l2 switch, then you don't need multicast routing / pim,
>> etc...However, you should have igmp snooping on
Hi,
On Mon, Oct 11, 2010 at 04:35:24PM -0400, Matthew Huff wrote:
> If the switch doesn't provide layer 3 services (routing) itself, but is
> really a l2 switch, then you don't need multicast routing / pim,
> etc...However, you should have igmp snooping on.
IGMP snooping won't help for router-s
On Mon, 11 Oct 2010 22:37:32 +0200, you wrote:
> The 2960 is a L2 switch. It can't do unicast routing either...
OT, but actually it can. Just only static unicast routing.
Release notes: "When you configure the new lanbase-routing SDM
template, the switch supports static routing and router ACLs
Hi,
On Mon, Oct 11, 2010 at 04:14:23PM -0400, Steven Pfister wrote:
> Thanks for your help... I think I almost got it but I'm running into a
> problem. It turns out the encoders on the remote site aren't connected
> directly to the 4506, but go to a 2960-48TC-L first. The IOS on that switch
> d
o-nsp-boun...@puck.nether.net] On Behalf Of Steven Pfister
Sent: Monday, October 11, 2010 4:14 PM
To: cisco-nsp@puck.nether.net
Subject: Re: [c-nsp] Need help with setting up ip multicast routing...correction
Thanks for your help... I think I almost got it but I'm running into a problem.
It turns out the
ood tutorials on the subject can be
> found at http://nanog.org/resources/tutorials/
>
> David Barak
> Need Geek Rock? Try The Franchise:
> http://www.listentothefranchise.com
>
>
> --- On Fri, 10/8/10, Steven Pfister wrote:
>
>> From: Steven Pfister
>> Subject: Re: [c
e's a lot more to optimization and troubleshooting, but that should
> provide initial connectivity. Some good tutorials on the subject can be
> found at http://nanog.org/resources/tutorials/
>
> David Barak
> Need Geek Rock? Try The Franchise:
> http://www.listentothefranchis
r wrote:
> From: Steven Pfister
> Subject: Re: [c-nsp] Need help with setting up ip multicast
> routing...correction
> To: cisco-nsp@puck.nether.net
> Date: Friday, October 8, 2010, 3:46 PM
> The line below reading "non-multicast
> traffic" should be "
ise:
http://www.listentothefranchise.com
--- On Fri, 10/8/10, Steven Pfister wrote:
> From: Steven Pfister
> Subject: Re: [c-nsp] Need help with setting up ip multicast
> routing...correction
> To: cisco-nsp@puck.nether.net
> Date: Friday, October 8, 2010, 3:46 PM
> The line below reading "non-mu
I have a few questions:
1. Can the servers ping the encoders?
2. Are the encoders connected at layer three and running PIM, or are
they layer two?
3. Is this source-specific multicast? If so, you need to be running
IGMP v3 on your layer two interfaces.
-John
On Fri, Oct 8, 2010 at 1:46 PM, Steve
The line below reading "non-multicast traffic" should be "non-multicast traffic
seems to be OK between the vlans"
Thanks!
Steve Pfister
Technical Coordinator,
The Office of Information Technology
Dayton Public Schools
115 S. Ludlow St.
Dayton, OH 45402
Office (937) 542-3149
Cell (937) 673-67
11 matches
Mail list logo