Tony B wrote:
No, I haven't ever seen a case that took in any appreciable amount of air from
the bottom.
If you're interested in max cooling, leave your case *open*. Point a fan at it.
While it is staying cool, it still gets awfully dusty. Is that one of
the omens of having a
John H. Davis wrote:
Christopher Range wrote:
While it is staying cool, it still gets awfully dusty. Is that one of
the omens of having a computerthat, the inside of a computer will
invariably get dust on the inside, eventually?
Christopher
Just think of it as a whole house air
Richard P. wrote:
And to think that I wasted all that money on a furnace purification
system... Now I know why the filters aren't getting dirty... ;-)
Richard P.
Funny :-D
Christopher
* == QUICK LIST-COMMAND
I don't know the theory behind case design as far as computers go, but
in other equipment that I'm familiar with, the case design controls air
flow (via the fans), especially to the other components that don't have
a fan. The (metal) case also provides some EM protection. As far as dust
Perhaps. But not on the horizontal parts. Again, the more air you circulate
the more dirt you're throwing at it. Tear out the carpet. Buy some parquet.
On Dec 10, 2007 12:48 PM, Christopher Range [EMAIL PROTECTED] wrote:
Ok. I do have one quandry on the 'air circulation' issue. I was
reading
Air flow is very important if you have passive cooling (for quietness) or
dead spots in your case where air doesn't typically circulate and
electronics provides a heat source.
Being a man of refinement, Tony, I have hunch that you would love this case
for its open design:
I mean why you want this case so much you want to spend that much on feet?
Mike
On Dec 8, 2007 10:18 PM, Christopher Range [EMAIL PROTECTED] wrote:
mike wrote:
So are you going to tell us or keep us in suspense?
Mike
I haven't been outbid yet but, there is more than a day, left in the
mike wrote:
I mean why you want this case so much you want to spend that much on feet?
Mike
I thought I might as well, use the whole case for spare parts since, the
production of the case was discontinued several years ago. Besides, I
have had my present case 7-8yrs.. Since the case
Carpet seems to generate a lot of dust, especially when it gets worn.
Richard P.
Tony B wrote:
Any system that relies on unfiltered room air for cooling is going to get
whatever comes along with that air. Some rooms just seem to generate tons of
debris while others very little. It seems not to
mike wrote:
I have to ask...you are willing to pay upwards of 70 bux for feet on a case?
What is it about this case you like so much?
Mike
At first, I didn't understand, what you meant, when, you mentioned $70
but, when you included the link on E-Bay, then I knew what you meant.
The
Here is a picture of my case: Antec KS188
http://www.antec.com/us/support_productInfo_details.php?ProdID=11193#
A case with a face that only its motherboard could love.
So why so much fuss over feet? I don't get it.
* ==
I have to ask...you are willing to pay upwards of 70 bux for feet on a
case? What is it about this case you like so much?
Mike
On Dec 7, 2007 11:47 PM, Christopher Range [EMAIL PROTECTED] wrote:
Jeff Wright wrote:
A complete case on eBay:
Which is basically what I asked way back before this thread became the
monster it has. Someone _else_ said they needed soft feet because they had
to pull theirs out all the time, but they never gave a good reason for doing
that and Chris never answered the question at all.
Besides, there's no
Tony B wrote:
Which is basically what I asked way back before this thread became the monster
it has. Someone _else_ said they needed soft feet because they had to pull
theirs out all the time, but they never gave a good reason for doing that and
Chris never answered the question at all.
I
Tom Piwowar wrote:
Here is a picture of my case: Antec KS188
http://www.antec.com/us/support_productInfo_details.php?ProdID=11193#
A case with a face that only its motherboard could love.
So why so much fuss over feet? I don't get it.
Thankyou for insult, I bet your computer looks
So are you going to tell us or keep us in suspense?
Mike
On Dec 8, 2007 8:59 AM, Christopher Range [EMAIL PROTECTED] wrote:
mike wrote:
I have to ask...you are willing to pay upwards of 70 bux for feet on a
case? What is it about this case you like so much?
Mike
At first, I didn't
mike wrote:
So are you going to tell us or keep us in suspense?
Mike
I haven't been outbid yet but, there is more than a day, left in the
auction. I guess I don't need the feet but, I always thought, part of
the ventilation for the case was on the bottom.
Christopher
No, I haven't ever seen a case that took in any appreciable amount of air
from the bottom.
If you're interested in max cooling, leave your case *open*. Point a fan at
it.
On Dec 9, 2007 12:18 AM, Christopher Range [EMAIL PROTECTED] wrote:
I haven't been outbid yet but, there is more than a
Richard P. wrote:
If you can get a part number from your documentation or the company,
then you might be able to do a search for them.
Richard P.
Good suggestion
Christophe
* == QUICK LIST-COMMAND REFERENCE - Put
Is there some reason you don't want to go to home depot or lowes or
radiosmack or walmart and buy some?
Mike
On Dec 7, 2007 2:23 PM, Christopher Range [EMAIL PROTECTED] wrote:
I know I am asking again. I contacted the company about the case feet
problem. They sent me a set of feet but, they
I know I am asking again. I contacted the company about the case feet
problem. They sent me a set of feet but, they are the type that can
only go on the bottom of a desktop case. I told them about the ones' I
received and, they suggested I take some pictures of the case, which I
did. They
If you can get a part number from your documentation or the company,
then you might be able to do a search for them.
Richard P.
Christopher Range wrote:
I know I am asking again. I contacted the company about the case feet
problem. They sent me a set of feet but, they are the type that can
mike wrote:
Is there some reason you don't want to go to home depot or lowes or radiosmack
or walmart and buy some?
Mike
I don't want to get, just anything. Jeff Wright suggested some at the
Micro Center in Fairfax. They are the same type as the ones' I received
from the company BUT,
A complete case on eBay:
http://cgi.ebay.com/Antec-KS-188-Full-Tower-Case-Beige-3-fans-13-drive-bays_
W0QQitemZ130180551416QQihZ003QQcategoryZ80166QQcmdZViewItem
-Original Message-
I know I am asking again. I contacted the company about the case feet
problem. They sent me a set of
24 matches
Mail list logo