On Sat, 23 Mar 2002, huug wrote:
Except we had already segfaulting rpms in 8.2. Remember XFree86s
xftcache, Xfces xfwm?
xftcache never segfaults for me? Maybe you have a bugged font? can you
provide a trace?
Danny
Op zondag 24 maart 2002 09:17, schreef u:
Will this work:
RPM_OPT_FLAGS=-O2 rpm --rebuild the.src.rpm
?
Don't think so.
gcc -c -I. -I. -I../include -I../include -O3 -fomit-frame-pointer -pipe
-mcpu=pentiumpro -march=i586 -ffast-math -fno-strength-reduce -Wall
Hello,
when I try to update the dev-3.2-4mdk.i586 package,
urpmi gets stuck. If I check with ps, I can see the
following:
/sbin/modprobe -k -C /etc/modules.devfs /dev/cciss
then, a few seconds later:
/sbin/modprobe -k -C /etc/modules.devfs /dev/ida
then it starts over again with cciss. It
Hello again,
after a few minutes of urpmi running, I get the following message
Cannot install the dev package: mounted devfs detected.
error: execution of %pre scriptlet from dev-3.2-4mdk failed, exit status
1
dev error: unpacking of archive failed on file
÷ ÷ÓË, 24.03.2002, × 20:14, Rainer Koschnick ÎÁÐÉÓÁÌ:
Hello,
when I try to update the dev-3.2-4mdk.i586 package,
urpmi gets stuck. If I check with ps, I can see the
following:
/sbin/modprobe -k -C /etc/modules.devfs /dev/cciss
then, a few seconds later:
/sbin/modprobe -k -C
÷ óÂÔ, 09.03.2002, × 22:34, Isaac ÎÁÐÉÓÁÌ:
OK all, I'm trying to help here. I'm giving a clear description of a
problem, the hardware it affects, and the proposed solution.
PROBLEM:
Installer kernel hangs at IDE probe when the ali15x3 driver is
loaded and attempts to probe devices.
÷ ÷ÓË, 24.03.2002, × 20:19, Rainer Koschnick ÎÁÐÉÓÁÌ:
Hello again,
after a few minutes of urpmi running, I get the following message
Cannot install the dev package: mounted devfs detected.
So what exactly do you ask? It was discussed just recently BTW.
error: execution of %pre
ksysv has the ip6tables and iptables services set as early starters
(ksysv 02 03).
This is wrong for all iptables scripts that include masquerading because
at that point there is no network yet set up and apparently iptables
checks the LAN.
Masquerading is therefore not set up, with no error
On Sun, 2002-03-24 at 18:24, Borsenkow Andrej wrote:
÷ ÷ÓË, 24.03.2002, × 20:19, Rainer Koschnick ÎÁÐÉÓÁÌ:
Hello again,
after a few minutes of urpmi running, I get the following message
Cannot install the dev package: mounted devfs detected.
So what exactly do you ask? It was
Hi, I sent this to [EMAIL PROTECTED] too, but I'm not
sure I'm able to. Anyway, I send it to this list too.
Note that I have allready updated the maildrop package in the Cooker contribs:
* Wed Mar 20 2002 Oden Eriksson [EMAIL PROTECTED] 1.3.8-1mdk
- 1.3.8
-- Forwarded Message
I'm looking for one of two things... either:
- a lukemftp mandrake RPM... they used to exist, but I can't find it
anywhere now; or,
- the file ftp://ftp.mandrakesoft.com/pub/chmou/skelet.spec.
ftp.mandraksoft.com always times out for me.
If I get a hold of the skelet.spec, I'll contribute
Hi,
$ rpm -q galeon
galeon-1.2.0-2mdk
I rebuilt galeon today and it complained about a missing bonobox.while
running configure.
I think that means there is a missing libbonobo2-devel in the
BuildRequires line of the spec file.
Just for info, Galeon does not like when I install the gnome2
Clicking on the link our generic .spec file leads to an FTP error
file not found.
Where does skelet.spec live nowadays?
--
Ryan T. Sammartino
http://members.shaw.ca/ryants/
Stupidity is its own reward.
Would adding virtual private servers functionality
(http://www.solucorp.qc.ca/miscprj/s_context.hc) be a nice feature for
Mandrake?
It's being developped by the same people that are doing Linuxconf it
seems. It's GPL. The features on the website look good, I'm currently
thinking about
Hi,
Can anyone tell me where to look to get my systems working with both heads
inteligently using 8.2? The matrox driver is not as good as the
standard setup of 8.1 and the 8.2 built in support for these cards is
partially broken and worse than pre 8.0 support.
The machine that I'm
Hi,
I hope someone can help with this:
I have two machines running dual head matrox cards[G400 G450]. In 8.1 the
dual head features installed and worked very well using Xinerama [XFree86
4.2.0-1mdk]. XFdrake also recognized that they were dual head cards
presenting appropraite options
It works better because it creates /dev/video*
But it also gives me this error msg:
(/var/log/messages after insmod command)
USB Quickcam Class ff SubClass ff idVendor 46d idProduct 870
USB Quickcam camera found using: $Id: quickcam.c,v 1.101 2002/02/13 22:44:43
jfclere Exp $
quickcam: probe
I have noticed that the package for kernel headers is different to all
the other kernel versions (2.4.18-25mdk, not 2.4.18.6mdk-1-1mdk)
kernel-2.4.18.6mdk-1-1mdk.i586.rpm
kernel-enterprise-2.4.18.6mdk-1-1mdk.i586.rpm
kernel-headers-2.4.18-25mdk.i586.rpm
kernel-secure-2.4.18.6mdk-1-1mdk.i586.rpm
X is slow to appear and some points appear on the screen at some time. When I
shutdown I see /dev/ttys all over the screen.
My /var/log/messages : (Mandrake 8.2)
Linux version 2.4.18-6mdk ([EMAIL PROTECTED]) (gcc version 2.96
2731 (Mandrake Linux 8
.2 2.96-0.76mdk)) #1 Fri Mar 15 02:59:08
Ryan T. Sammartino wrote:
testing... sent several messages today, but they haven't shown up in the
mailing list yet. It's been several hours, so I'm sending this test.
Mine are taking 10 minutes to do the round trip and appear back here.
If your messages contain the letter sequence
On Saturday 23 March 2002 05:30 pm, you wrote:
Hi all...
I was thinking that there was no new version of portsentry in cooker,but
fact is that thre is NO version, it has been removed. What can I use
as a substitute ? I really liked it...
TIA
Why not go to: http://www.psionic.com/
and
On Mon, Mar 25, 2002 at 01:28:28PM +1100, Ron Stodden wrote:
Ryan T. Sammartino wrote:
testing... sent several messages today, but they haven't shown up in the
mailing list yet. It's been several hours, so I'm sending this test.
Mine are taking 10 minutes to do the round trip and
On Sunday 24 March 2002 08:58 pm, you wrote:
On Mon, Mar 25, 2002 at 01:28:28PM +1100, Ron Stodden wrote:
Ryan T. Sammartino wrote:
testing... sent several messages today, but they haven't shown up in
the mailing list yet. It's been several hours, so I'm sending this
test.
Mine
On Fri, Mar 22, 2002 at 05:38:58PM +0800, R.I.P. Deaddog wrote:
They REALLY cann't coexist for now. Try compiling both x11 target and
linux-fb target seperately, and compare their gtk+-2.0.pc and gdk-2.0.pc.
Fair enough. What about mutually exclusive RPMs then? Really, if one
wants
Quoting Carfield Yim [EMAIL PROTECTED]:
What is the difference of default kernel and kernel-secure?
de fault kernel is de kernal whose fault it is. Kernal-secure is de fault kernal
after de general
throws him in de brig.
-- --
|| \\\|///
Hi cookers,
I am upgrading a friends PC from Madrake 6.x to 8.2. Once the upgrade
had completed and I tried to boot, I got an error.
Init: Id x respawning too fast: disabled for 5 minutes.
After the five minutes it tries to complete the boot sequence but gets
the same error. Any idea why
It means X is trying to start (for KDM) and failing.
You need to get X working again.
Upgrading from 6.x to 8.2 isn't really supported, and
more than likely things aren't perfect. I upgraded
my parents from 6.1 to 8.1 by getting a new hard drive
and doing a fresh install.
--- [EMAIL
Hi,
I've run into this before, but got around it by booting
with a cdrom.img boot floopy. This time, however, the system (HP
Pavillion zt1170 notebook) doesn't have a floppy drive. The CD
boots, but the kernel fails to find the initrd image (all.rdz?)
The command I used to generate
Greets,
I'm trying to force myself to use rpmdrake instead of urpmi but there is
one thing that annoys the snot out of me. Even though I only have one
media source defined, it still shows me a dialog window where I have to
check the only toggle box displayed in order to do the update. So I
wrote
I have been running a www / ftp / mail server using cooker / mandrake 8.2 for
a while now.. and just today out of the blue msec gave this error on its job
in /etc/cron.hourly
msec: unable to parse chage output
now the only thing that has changed befor this ran and gave me the error was
On Sun, 2002-03-24 at 23:16, Geoffrey Lee wrote:
--=-=-=
Name: gaim Relocations: (not relocateable)
Version : 0.54 Vendor: MandrakeSoft
Ahhh, well, I was hoping my new spec file would be used... Curious as
to why it's not?
Yo,
On Tue, Mar 19, 2002 at 02:40:20AM -0600, Bryan Paxton wrote:
897fbac80b4aa86fadf3d67a391051bb gaim-0.54-0.1mdk.src.rpm
Sorry for the late reply.
I just uploaded the latest version because I can't find yours in
/incoming
but anyway if you tell me what you have done I can merge them
On Sunday 24 March 2002 08:36 pm, you wrote:
First of all Thanks, with your help, the issue is resolved.
There may still be a small issue someone may want to look at with the G400
card detection. When I installed 8.2 I had the G400 card installed and
experienced the problems below. I tried
de fault kernel is de kernal whose fault it is. Kernal-secure is de fault kernal
after de general
throws him in de brig.
Where can I find more detail? I don't really understand what you say...
--
\\\|///
\- - -//
( )
- Original Message -
From: pbrown [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, March 25, 2002 12:46 AM
Subject: Re: [Cooker] Matrox G400/450 Dual Head functionality lost in 8.2
On Sunday 24 March 2002 08:36 pm, you wrote:
First of all Thanks, with your help, the issue is
On Sun, 2002-03-24 at 23:34, Geoffrey Lee wrote:
Sorry for the late reply.
n/p : )
I just uploaded the latest version because I can't find yours in
/incoming
Odd...
First the diff, this is diff between 0.54-mdk1 in cooker and my
0.54-0.3mdk (re-added the smiley patch) spec
diffstat
Chuck Shirley [EMAIL PROTECTED] writes:
Sorry!
I think I figured it out. There was a wildcard in my rsync exclude file
that matched the all.rdz image... Ass soon as I burn/test the new cdrs,
I'll post confirmation.
OK, if you have any pb with isolinux, you can use normal cdrom.img boot
David D. Huff Jr. [EMAIL PROTECTED] writes:
Was this kernel hidden away for some reason? Will there be a
re-release of the 2.4.17-1 MOSIX kernel from Mandrake?
yes there'll
Will Mandrake continue to release MOSIX kernels
yes. but for now, userland tools're broken due to missing files
On 23 Mar 2002 09:52:50 +
Michael Dransfield [EMAIL PROTECTED] wrote:
I have noticed that the package for kernel headers is different to all
the other kernel versions (2.4.18-25mdk, not 2.4.18.6mdk-1-1mdk)
kernel-2.4.18.6mdk-1-1mdk.i586.rpm
kernel-enterprise-2.4.18.6mdk-1-1mdk.i586.rpm
On Sun, Mar 24, 2002 at 10:36:32PM +0100, Jacques Le Marois wrote:
I was very surprised to read this thread because it's
the first time I've heard of these problems.
Well it's not like this is the first time I've mentioned these issues on
this list. It seems to be the first time anybody has
40 matches
Mail list logo
