I need a partition with lots of space for iso-images/tracks. So i chose
to put everything into /home/toast. I did a chmod -R 777 on toast so
everyone can do anything with it.
After every boot i end up not having the permissions to write into that
directory, the permissions have been changed.
Hi,
Today I got an announcement via freshmeat that gcc-3.2 was released..,
well
actually it was released yesterday (2002/08/14). In Cooker we have a CVS
snapshot(?) from 2002/08/12, wouldn't it be great to have an official
gcc for
a change in a Mandrake release?
Hmm, what do you mean?
Ok someone doesn't have a good sense of humor... ;-)
-randy
Warly wrote:
The thing is that we have not the soure any more of this windows apps, and
that we generally on patch the binary to change the version number... :(
It is quite hard to find a windows developer here arround...
I didn't know that. Maybe one could be found if you ask for him on
After reading the thread a couple of hours ago I decided to start working on a
replacement. I've got a pretty good one going using only the windows C API
to eliminate any problems with dependencies. I'd be more than willing to GPL
it for use in Mandrake. Do you folks have the source to the
I think you missed the point. If a user doesn't need to see something,
don't show it to them. Everything should just work. The user should
only see error messages if something fails. Too much explanations in
Software of everything the system is doing implies the developer is
drowned in the code
On 16 Aug 2002 10:17:26 +0200
Michel Fodje [EMAIL PROTECTED] wrote:
Let me end by quoting Joelonsoftware:
http://www.joelonsoftware.com/uibook/chapters/fog64.html
... there is a much worse kind of arrogance in software design: the
arrogant assumption that my software is so damn
Like I say in the subject, there's still a dependency problem with
printer-filters.
libstdc++.so.5(GLIBCPP_3.1) is needed by printer-filters-1.0-67mdk
Matthew Tedder [EMAIL PROTECTED] writes:
The GA 7VRXP support for accessing its two RAID disks is no longer
working! I need this to work because, even though it doesn't allow
use of RAID capabilities, I used the two drives to backing up my
critical data.. I cannot revert to 8.2 because the
Le Mercredi 17 Juillet 2002 11:22, pascal a écrit :
as stated in
http://www2.lm-sensors.nu/~lm78/cvs/lm_sensors2/prog/hotplug/README.p4b
can you compile and include p4b_smbus.o in the RPM please ?
Pascal
Hello,
p4b_smb.o is still missing in kernel 2.4.19-3 ...
Pascal
On Fri, 2002-08-16 at 09:47, Chris Higgins wrote:
... there is a much worse kind of arrogance in software design: the
arrogant assumption that my software is so damn cool, people are just
going to have to warp their brains around it. This kind of chutzpah
is pretty common in the free
On Fri, 2002-08-16 at 04:18, Warly wrote:
The thing is that we have not the soure any more of this windows apps, and
that we generally on patch the binary to change the version number... :(
It is quite hard to find a windows developer here arround...
Hmm - my Dad's a quite experienced
I've actually been looking for the name of that simple firewall
wizard package since I reinstalled Mandrake 8.2 (really not the OS's
fault, I had a family member decide it was a good idea to unplug the
server between the box and it's UPS which resulted in the HDD spraying
garbage all
Am Freitag, 16. August 2002, 11:10:53 Uhr MET, schrieb Adam Williamson:
GNOME, well, the GNOME team have taken a design decision that they
consider Nautilus so central to the functioning of their desktop
environment that it ought to be there. The line between essential core
components and
On Fri, 2002-08-16 at 09:17, Michel Fodje wrote:
should feel natural. It doesn't mean that it should loose functionality,
Does it involve good spelling?
G
Sorry, cheap shot I know. But this one *really* gets on my nerves.
Lose and Loose are two different words in English. Lose is a verb
One of the biggest problems hitting the Linux world is the failure
of people to understand the different approach taken by Unix systems
to solving problems.
Aye, and different approaches are very good.
The arguments about Aurora / OSS / ALSA are the same,
people are trying to restrict
On Fri, 2002-08-16 at 06:27, Richard G. Houser wrote:
I'm not certain this is such a bad thing, when installing another source
version, the sources go in the /usr/src/linux-x.y.zz directory, and a
simlink to the current kernel version is created into /usr/src/linux.
Are you *sure* about
Richard Tango-Lowy wrote:
depmod: *** Unresolved symbols in
/lib/modules/2.4.19-3mdk/kernel/drivers/media/video/saa7134.o.gz
I have the same error in /var/log/boot.log.
--
Live long and prosper!
hello !
I installed beta 3. I also installed the GForce Driver
from Nvidia. And I installed quake3 point release,
everything I need for my workstation :-). yes, and all
works great, withouth that I have no sound in q3 .the
sound works well for everything else (i have a es1371
sound card,
Richard Tango-Lowy wrote:
Determining IP information for eth1... failed; no link present. Check cable?
Same problem here. I have 3Com 3C905B NIC and use DHCP to connect to my
cable ISP.
--
Live long and prosper!
I'd be a lot happier with just 'X windows' and pick
whatever KDE apps you want, and whatever Gnome apps you want.
Rather than at the moment having to install both KDE and Gnome
and then choose a single environment rather than
mix and match the ones that you want.
Ack, that'd be a bad bad
I have a Leadtek 7350 KDA with an integrated network peripheral
(a Realtek 8139).
I can't ping the others computers of my local network, so I can't see
them in Gnomba.
I've installed Mandrake 8.2 on the same computer, and there isn't any
problem.
Do you tink it's a bug?
Thank you.
Roland.
On 16 Aug 2002 12:12:41 +0200
Michel Fodje [EMAIL PROTECTED] wrote:
On Fri, 2002-08-16 at 10:47, Chris Higgins wrote:
Mandrake Linux is what I use on my desktop, I put redhat or
debian on servers. I'm considering dropping Mandrake for my
desktop - and let me take a second to explain why.
I've installed Mandrake 8.2 on the same computer, and there isn't any
problem.
Do you tink it's a bug?
More than likely, it's a firewall of some kind, or your card didn't load the
correct model, or you just haven't connected it to the network yet. Either
way, it's doubtful it's a bug.
On 16 Aug 2002 11:10:53 +0100
Adam Williamson [EMAIL PROTECTED] wrote:
One huge snip later -
which is fine, but this is different from
your concept of Mandrake abandoning the (good) Linux design philosophy
and going to the(bad) Windows one.
You've picked my up wrong on this point, and
More than likely, it's a firewall of some kind, or your card didn't load
the correct model, or you just haven't connected it to the network yet.
Either way, it's doubtful it's a bug.
I've got the same model of card you've got set up, and I've had no problems
with getting anywhere, though I
On fredagen den 16 augusti 2002 02.59 Gwenole Beauchesne wrote:
Hi,
Today I got an announcement via freshmeat that gcc-3.2 was released..,
well
actually it was released yesterday (2002/08/14). In Cooker we have a CVS
snapshot(?) from 2002/08/12, wouldn't it be great to have an official
On 16 Aug 2002 10:49:01 +0100
Adam Williamson [EMAIL PROTECTED] wrote:
On Fri, 2002-08-16 at 06:27, Richard G. Houser wrote:
I'm not certain this is such a bad thing, when installing another source
version, the sources go in the /usr/src/linux-x.y.zz directory, and a
simlink to the
On Fri, 16 Aug 2002 13:05:57 +0200
[EMAIL PROTECTED] wrote:
More than likely, it's a firewall of some kind, or your card didn't load
the correct model, or you just haven't connected it to the network yet.
Either way, it's doubtful it's a bug.
I've got the same model of card you've got
Hi.
Will this one make it into ML9.0?
http://www.openssl.org/source/openssl-0.9.6g.tar.gz
--
Regards // Oden Eriksson
Deserve-IT Networks - http://d-srv.com
1. When you point to a package group and wait for a moment a tooltip
appears. This tooltip has the same background as the Package group
selection dialog. So it is a little hard to se it. I think it would be
better to change tooltip background so it is easy to distinguish tooltip
from the
Oden Eriksson wrote:
And I assumed this was a CVS snapshot because gcc-3.2 final was released
2002/08/14. I never checked if the sources were the same. Maybe a diff would
tell the thruth in this case, but I didn't go that far. If ML9.0 would be
released and compiled with this gcc-3.2-1mdk
After you select the mouse type you enter the mouse test screen where it
says Please test the mouse.
1. Both buttons look strange when you enter this screen. Like there is
something missing at the top and buttom edge of both buttons. After
moving the mouse over both buttons they look OK.
2.
It is quite hard to find a windows developer here arround...
Probably not the best place to mention it, but I'm a windows programmer
;) (Delphi)
Working on switching to Linux tho (which *is* why I'm here!) :) (Kylix).
Anything I can do, just shout.
Andy
When installation of packages is under way there is no information on
how many packages are there in total that are going to be installed, how
many are remaining to be installed and how many are allready installed.
--
Live long and prosper!
Hi.
It appears that things is happening at OpenOffice.org+SUN, and I wonder if the
lawyer department at Mandrake could have a look at the Joint Copyright
Agreement (JCA) and Public Documentation License (PDL) and see if it fits
into the Mandrake licensing model?
Article here:
When I am setting up network I get this message for my detected NIC
(which is OK):
Found 3Com Corporation|3c905B 100BaseTX [Cyclone]
Do you have another one?
I have only one NIC in my system so I choose No. But then I get the same
message once again. I again choose No and this time it doesn't
When you are adding a user during installation icon sellectio is a
little clumsy.
1. You can only go in one direction thru images. And if you happen to
miss the picture you like you have to go thru all pictures untill you
get back to the one you wanted.
2. You can't sellect other pictures
When I wan't to add printer during the installation I select that it is
local printer. But even if it is local printer Mandrake tries to bring
up the network which I think is not needed to add local printer.
--
Live long and prosper!
Happened to me, too.
Jure Repinc said:
When I wan't to add printer during the installation I select that it is
local printer. But even if it is local printer Mandrake tries to bring
up the network which I think is not needed to add local printer.
ars Cognita The Art of Knowledge
[EMAIL PROTECTED] wrote:
I have a Leadtek 7350 KDA with an integrated network peripheral
(a Realtek 8139).
I can't ping the others computers of my local network, so I can't see
them in Gnomba.
Great bug report.
I've installed Mandrake 8.2 on the same computer, and there isn't any
Warly wrote:
The thing is that we have not the soure any more of this windows apps, and
that we generally on patch the binary to change the version number... :(
It is quite hard to find a windows developer here arround...
How about having someone write in wx? Then it can be developed
As of beta 3, I can no longer add new Metacity themes (I particularly like
Amadeus -- very nice. I install the theme using the gnome2 installer and
the new theme gets copied into ~/.metacity/themes, but it never shows up
in the list.
If I run metacity-setup, my new themes are listed, but I can't
After you select which version of XFree86 you want to use and setting up
the monitor and resolution you have an option to test the X
configuration. When the test screen appears there is a dialog box that
asks you to press the Yes button if you can read the text and resolution
is OK. Also the
On Fri, 2002-08-16 at 12:12, Marcel Pol wrote:
Yes, it is.
The default /etc/urpmi/inst.list only lists kernel, not kernel-source.
I myself added kernel-source to it manually, because of not wanting to get
kernel and kernel-source get out of sync with eachother.
So the suggestion would be to
Richard Tango-Lowy wrote:
Could not open /etc/ptal/mlc:usb:officejet_d_series for writing
I got the same thing with my HP 3330 MFP, except the file was:
/etc/ptal/mlc:usb:HP_LasetJet_3330
After the install finished, /etc/ptal was there, owned by root:root, but was
empty. However,
Hi.
Below is swedish and norweigan and says like: the machine was rebooted but
some services where not startet automatically.
(I think/hope it will be up and running soon)
Chears
-- Vidarebefordrat brev --
Subject: Re: rsync? (fwd)
Date: 16 Aug 2002 14:31:55 +0200
From:
Jure Repinc [EMAIL PROTECTED] writes:
When you are adding a user during installation icon sellectio is a little
clumsy.
1. You can only go in one direction thru images. And if you happen to miss the
picture you like you have to go thru all pictures untill you get back to the
one you
Jure Repinc [EMAIL PROTECTED] writes:
1. When you point to a package group and wait for a moment a tooltip appears.
This tooltip has the same background as the Package group selection dialog. So
it is a little hard to se it. I think it would be better to change tooltip
background so it is
--- Oden Eriksson [EMAIL PROTECTED] wrote:
far. If ML9.0 would be
released and compiled with this gcc-3.2-1mdk it
would be the first time in
history (AFAIK) Mandrake used an official gcc
release, that would be very
nice. Thanks.
Not that it wouldn't be patched like crazy, but as
long as
In menudrake there extended tab where you can set charset, order... It
does not work with mouse. I cant set values and press OK or cancel.
menudrake-0.7.1-1mdk
icewm-gnome-1.2.0-3mdk
Pixel wrote:
Jure Repinc [EMAIL PROTECTED] writes:
1. When you point to a package group and wait for a moment a tooltip appears.
This tooltip has the same background as the Package group selection dialog. So
it is a little hard to se it. I think it would be better to change tooltip
Last night I went through full installs on my Desktop and Laptop...
The laptop has 2 PCMCIA cards: a generic serial and a Linksys WPC11.
Beta2 detected the serial card, but couldn't identify the WPC11,
presumably because WPC11 support only showed up in pcmcia-cs-3.1.33, and
MDK is still using
Le Fri, 16 Aug 2002 08:07:59 -0400, Richard Tango-Lowy a écrit :
As of beta 3, I can no longer add new Metacity themes (I particularly like
Amadeus -- very nice. I install the theme using the gnome2 installer and
the new theme gets copied into ~/.metacity/themes, but it never shows up
in the
Le Fri, 16 Aug 2002 08:54:07 -0400, Yura Gusev a écrit :
In menudrake there extended tab where you can set charset, order... It
does not work with mouse. I cant set values and press OK or cancel.
menudrake-0.7.1-1mdk
icewm-gnome-1.2.0-3mdk
No problem here.. Are you sure it is not a problem
Richard Tango-Lowy [EMAIL PROTECTED] writes:
1. During the package install, I got a cryptic requestor that said
something like Screenshots will be available... It waited for me to
click OK before it would go on.
didn't you press F2 ?
2. During X intall, my ATI Rage 128 Mobility was
Buchan Milne wrote:
Jure Repinc wrote:
There are some prolems with LILO configuration options:
1. You can't delete an entry. There are only Add And Modify buttons. I
think you should add a Remove button so that all the bittons would be:
Add, Modify, Remove, Done.
Choose modify, you
Jure Repinc wrote:
There are some prolems with LILO configuration options:
1. You can't delete an entry. There are only Add And Modify buttons. I
think you should add a Remove button so that all the bittons would be:
Add, Modify, Remove, Done.
Choose modify, you can delete it from there.
On fredagen den 16 augusti 2002 09.15 Christian Belisle wrote:
--=-=-=
Name: openssl Relocations: (not relocateable)
Version : 0.9.6gVendor: MandrakeSoft
Release : 1mdk Build Date: Fri Aug 16 14:56:25
Pixel said:
1. During the package install, I got a cryptic requestor that said
something like Screenshots will be available..
didn't you press F2 ?
Should I have? :-)
2. During X intall, my ATI Rage 128 Mobility was properly detected,
but defaulted to a 640x480 screen size, after I
I tried that and it didn't work. .xsession-errors says
Window manager warning: Failed to load theme Amadeus: Line 423 character
1: No frame style set for window type border in theme Amadeus, add a
window type=border style_set=whatever/ element
Looks like in incompatibility with the new version
Frank Griffin [EMAIL PROTECTED] writes:
Matrox G550 video is better in beta3. Beta2 screwed up the xf86config
file and forced the display to 640x480. The install dialog still comes
up with 640x480 after having me select 1280x1024@70 Hz,
i'll have a look.
but after
I reselect 1280x1024,
On Thu, 2002-08-15 at 17:57, Frank Griffin wrote:
Austin Acton wrote:
See below...
Thanks !
Keep in mind that Mandrake's RPM HOWTO is dreadfully out-of-date the
last time I checked.
--
Brad Felmey
cp: cannot stat `/root/mcc.conf': No such file or directory
error: execution of %trigger scriptlet from drakconf-9.0-0.6mdk failed, exit status 1
cp: cannot stat `/root/mcc.conf': No such file or directory
error: execution of %trigger scriptlet from drakconf-9.0-0.6mdk failed, exit status 1
Just having a discussion on urpmi sources in the IRC channel. I was
wondering...is there any benefit to allowing different urpmi sources to
have different locations and names for their hdlists? If not, could the
name and location of the hdlist not be standardised, which would then
mean the user
I added
window type=border style_set=normal/
to the theme's xml file and it now works properly. :-) Will notify the
theme's owner.
Rich
Richard Tango-Lowy said:
Window manager warning: Failed to load theme Amadeus: Line 423
character 1: No frame style set for window type border in theme
Liam Quin [EMAIL PROTECTED] writes:
cp: cannot stat `/root/mcc.conf': No such file or directory
error: execution of %trigger scriptlet from drakconf-9.0-0.6mdk failed, exit status 1
cp: cannot stat `/root/mcc.conf': No such file or directory
error: execution of %trigger scriptlet from
Dear All,
A suggestion for a drake.Procmail. I know there is a system wide thing
with the latest webmin but...
Given that Mandrake can be used as both client server with the new VNC
thing it can approximate to say citrix or similar the problem a friend of
mine has who is looking at Linux
On Friday August 16 2002 05:21 am, Sitsofe Wheeler wrote:
I've actually been looking for the name of that simple firewall
wizard package since I reinstalled Mandrake 8.2 (really not the
OS's fault, I had a family member decide it was a good idea to
unplug the server between the box and
Warly wrote:
Chris Needham [EMAIL PROTECTED] writes:
Hey guys looks like you did alot of improvments on the latest beta but
I am still having issues with supermount. Im not sure if it hasnt been
fixed or not or if it is going to be but I am wandering on the status
or if their is anyway I
Wisdom dictates not using cooker on production servers.
I am not wise.
I tried out beta 1 and all the basic stuff ran so well I put it up as a
production server. I did have problems with htdig which I didn't find until I
was committed.
Some strange athlon/via/sis problems went away and I am
On Wed, Aug 14, 2002 at 01:29:29AM -0700, Ben Reser wrote:
If there's interest I can upload it to contrib. :)
Oh yes, I was missing them very much.
Liebe Grüße, Nora.
--
[EMAIL PROTECTED]
IM-NETZ Neue Medien, Berlin http://www.im-netz.de/
WWW von Frauen für Frauen,
On Friday 16 August 2002 05:42 am, daniel beck wrote:
hello !
I installed beta 3. I also installed the GForce Driver
from Nvidia. And I installed quake3 point release,
everything I need for my workstation :-). yes, and all
works great, withouth that I have no sound in q3 .the
sound works
On Fri, 2002-08-16 at 11:28, Chris Higgins wrote:
I'd be a lot happier with just 'X windows' and pick
whatever KDE apps you want, and whatever Gnome apps you want.
Rather than at the moment having to install both KDE and Gnome
and then choose a single environment rather than
mix and match
Hi all,
I'm running cooker on my laptop, but these two packages cannot
be upgraded with rpmdrake (nor manually with rpm). Does anyone
know a smooth way to do it ?
I think that a bottable floppy with the latest cooker images could do
the job... but I feel too lazy
On Friday 16 August 2002 09:09 am, Adam Flinton wrote:
It is a hole in the current set up as you are not about to teach a normal
user how to write procmail rules. It must be simple even if that means
losing some of the capabilities of procmail. Look at the MS Outlook
Outlook express rules
Having been looking at OO deploying it I have a suggestion which would be
to create a script which can run much like the First time thing which
allows the system to to install OO by default using the /net option then
as each user logs into his/her desktop for the first time it could pop up
with
I asked about this in a mail entitled:
M9 Beta2 Bug 1 - losing icons menus
was just wondering if this is a known bug /or what I should do about it.
Adam
START___
Dear All,
Testing M9 Beta 2 :
I have found some bugs. Reading the how-to post bit I am chopping each bug
into
Since Beta 1 I have not been able to get my Lexmark Z52 to print. At
installation it says installing as local printer then when installation
is over it will not print. Have tried all 3 betas and did clean installs
on all 3 but still it does not work. I need my printer can anyone help.
It
On Fri, 16 Aug 2002 16:08:42 +0100
Adam Flinton [EMAIL PROTECTED] wrote:
I asked about this in a mail entitled:
M9 Beta2 Bug 1 - losing icons menus
was just wondering if this is a known bug /or what I should do
about it.
did you try running update-menus from a terminal? Any errors?
-
Adam Flinton wrote:
Having been looking at OO deploying it I have a suggestion which would be
to create a script which can run much like the First time thing which
allows the system to to install OO by default using the /net option then
as each user logs into his/her desktop for the first
Run menudrake or update-menus, and see if it helps.
Adam Flinton wrote:
I asked about this in a mail entitled:
M9 Beta2 Bug 1 - losing icons menus
was just wondering if this is a known bug /or what I should do about it.
Adam
START___
Dear All,
Testing M9
Igor Izyumin wrote:
On Friday 16 August 2002 09:09 am, Adam Flinton wrote:
It is a hole in the current set up as you are not about to teach a normal
user how to write procmail rules. It must be simple even if that means
losing some of the capabilities of procmail. Look at the MS Outlook
- Original Message -
From: Igor Izyumin [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, August 16, 2002 4:15 PM
Subject: Re: [Cooker] Suggestion for a Drake - procmail
How many people use procmail and don't run an email server? I think this
would not be a very useful drake.
On Fri, 2002-08-16 at 15:30, Oden Eriksson wrote:
Thank you!
It's a pleasure :-)
Seriously, I know you asked for MySQL 3.23.52. I tried to upgrade it,
but it's not compiling. I don't have the time right now to look further
at it, but it will come later.
--
Christian Belisle
Adam Flinton wrote:
Dear All,
A suggestion for a drake.Procmail. I know there is a system wide thing
with the latest webmin but...
Given that Mandrake can be used as both client server with the new VNC
thing
Do you mean the terminal server. It most definitely is not VNC.
it can
On Wed, 2002-08-14 at 08:08, Laurent MONTEL wrote:
* Thu Aug 15 2002 Laurent MONTEL [EMAIL PROTECTED] 3.0.2-37mdk
- Rebuild against new gcc
- Disable debuggage
After installing this package via urpmi --auto-select last night, I am
unable to get KDE to run. First nsplugin scan segfaults,
I'll give it a go.
Adam
- Original Message -
From: rcc [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, August 16, 2002 4:15 PM
Subject: Re: [Cooker] Is there an answer to this?
On Fri, 16 Aug 2002 16:08:42 +0100
Adam Flinton [EMAIL PROTECTED] wrote:
I asked about this in
Le Mercredi 14 Août 2002 15:06, Jean-Paul Smets a écrit :
Le Lundi 12 Août 2002 18:49, Oden Eriksson a écrit :
On måndagen den 12 augusti 2002 06.18 Jean-Paul Smets wrote:
Le Lundi 12 Août 2002 17:33, Oden Eriksson a écrit :
On måndagen den 12 augusti 2002 04.58 Jean-Paul Smets wrote:
Le Mercredi 14 Août 2002 21:41, Oden Eriksson a écrit :
On onsdagen den 14 augusti 2002 09.06 Jean-Paul Smets wrote:
Le Lundi 12 Août 2002 18:49, Oden Eriksson a écrit :
On måndagen den 12 augusti 2002 06.18 Jean-Paul Smets wrote:
Le Lundi 12 Août 2002 17:33, Oden Eriksson a écrit :
- Original Message -
From: Igor Izyumin [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, August 16, 2002 4:15 PM
Subject: Re: [Cooker] Suggestion for a Drake - procmail
How many people use procmail and don't run an email server? I think this
would not be a very useful drake.
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Fri 16 August 2002 3:55 pm, Mike Graham wrote:
Since Beta 1 I have not been able to get my Lexmark Z52 to print. At
installation it says installing as local printer then when installation
is over it will not print. Have tried all 3 betas and
On Friday 16 August 2002 17:29, Brad Felmey wrote:
On Wed, 2002-08-14 at 08:08, Laurent MONTEL wrote:
* Thu Aug 15 2002 Laurent MONTEL [EMAIL PROTECTED] 3.0.2-37mdk
- Rebuild against new gcc
- Disable debuggage
After installing this package via urpmi --auto-select last night, I am
tarvid wrote:
I will listen to suggestions for the best way to migrate from beta 1 to beta
3.
If this can be done by updating the existing server that would be neat. It
could be done piecemeal with a backout plan it things go bad.
I can also bring up a spare server with beta 3 and
--- rcc [EMAIL PROTECTED] wrote:
On Fri, 16 Aug 2002 16:08:42 +0100
Adam Flinton [EMAIL PROTECTED] wrote:
I asked about this in a mail entitled:
M9 Beta2 Bug 1 - losing icons menus
was just wondering if this is a known bug /or
what I should do
about it.
did you try running
On Friday 16 August 2002 10:24 am, Adam Flinton wrote:
I don't think he is alone in this i.e. wanting a Linux mail / internet
services server but keeping the Windows clients at least so that any move
is a steady migration. Quite simply given the volume of cr*p that comes
into many people's
Installing Beta3 as an Expert/Upgrade to Beta2.
Kernel-source and kernel-docs 2.4.19.3 are installed by default.
Kernel-2.4.19.3 Is Not installed by default but must be manually
selected.
During installation of bootloader No Entries are created for
kernel-2.4.19.3.
The default, and in fact all
On fredagen den 16 augusti 2002 11.22 Jean-Paul Smets wrote:
Le Mercredi 14 Août 2002 21:41, Oden Eriksson a écrit :
On onsdagen den 14 augusti 2002 09.06 Jean-Paul Smets wrote:
Le Lundi 12 Août 2002 18:49, Oden Eriksson a écrit :
On måndagen den 12 augusti 2002 06.18 Jean-Paul Smets
--- Adam Flinton [EMAIL PROTECTED] wrote:
He ( the company he works for) would like to move
to LDAP for the address
book etc + Postfix + IMAP. What is stopping this is
the inability of the
Windows mail clients to filter IMAP messages.
Tell him to check out cyrus-imapd, it has something
Installing Beta3 as an Expert/Upgrade to Beta2.
Kernel-source and kernel-docs 2.4.19.3 are installed by default.
Kernel-2.4.19.3 Is Not installed by default but must be manually
selected.
During installation of bootloader No Entries are created for
kernel-2.4.19.3.
The default, and in fact all
1 - 100 of 215 matches
Mail list logo
