Le Mardi 10 Septembre 2002 13:23, dcd a écrit :
Hi,
I don't understand why these drivers are excluded. They are a free
download from NVidea, and currently it only hurts the distro that 3d is
so poor in the standard edition.
Do you ever heard mdk policy about software licenses ?
BTW,
On Tue, 10 Sep 2002 12:19:15 +0100
Crispin Boylan [EMAIL PROTECTED] wrote:
on my tuxkart (0.1.0-4mdk) when you start the game Tux and his kart
just plummet downwards through the track - why is this?
nVIDIA (29.60) drivers loaded and working, XFree86 4.2.1, Mesa
4.0.3-6mdk
I have the same
hello,
I don't know exactly where is my problem or mistake. So i am going to describe
my probleme :
i have ps/2 keyboard(105) and a usb mouse. my linux mandrake cooker, may
kernel 2.4.19-8mdk
When i boot i need to enter in the interractive boot to use the systeme. when
i arrive under X, i
I noticed on a fresh install that one of my students was trying to open
up a zip package from within Kde, but it wouldn't open up because ark
complained that zip was not installed. Shouldn't ark's depend on zip
and unzip?
Henri [EMAIL PROTECTED] writes:
Hi,
each time i want to install something with urpmi, i've got towait for ten
minutes it stops searching my empty cd-drive, or i have to put any cd in it to
make it stop.
I've got a got an ide cd-burner (emulated as scsi),
Disable supermount and it will be
Le Tuesday 10 September 2002 11:35, Crispin Boylan a écrit :
Hi
Fixed in kdeadmin-10mdk
Regards.
kPackage still crashes if you select an RPM, then click 'file list' and
then click on any blank space in the file pane
this is reproduceable every time
output from KDE Crash Handler follows
On Tue, 10 Sep 2002 12:19:15 +0100
Crispin Boylan [EMAIL PROTECTED] wrote:
on my tuxkart (0.1.0-4mdk) when you start the game Tux and his kart
just plummet downwards through the track - why is this?
nVIDIA (29.60) drivers loaded and working, XFree86 4.2.1, Mesa
4.0.3-6mdk
I have the same
I have two cdrom drives, as you can see below. After a rc1 upgrade the
installer removed both of my cdrom drives (which work fine) from
/etc/fstab.
Also devfsd seems to be having a hard time picking up hdc, if I access
hdd then hdc becomes populated in /dev/ide/host0/bus1/target0/lun0 but a
On Tue, 10 Sep 2002 20:05, Chris Picton wrote:
My maximum mode is exactly the same as before, but I have many more low
resolution modes.
For my monitor, the full list available modes I get is:
[57 modes deleted]
You want to hit Ctrl-Alt-GreyMinus _how_ many times to get the rez you like?
I've just tried to install Cooker via NFS in textmode.
The installation jumps over the package selection step in the install.
When it comes to making lilo/grub it fails and it even fails to create
bootdisk.
One small issue is that it is not possible to do an english installlation and
Felix Miata [EMAIL PROTECTED] writes:
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Trevor Ramoutar [EMAIL PROTECTED] writes:
I was able to successfully install RC1. In the last part of the
install, I created a bootdisk and then rebooted. However when I
try to boot off
Hello,
I observed in RC1 that when I right-click on a launcher in the panel and
click Properties, the gnome-panel crashes. The output of
.xsession-errors is attached.
Furthermore I plead that the updated Dutch translations for gnome-panel be
included; they can be got from
Combelles, Christophe (MED, ALTEN) [EMAIL PROTECTED] writes:
There is also a typo availlable in this file.
just fixed both
Chris Picton [EMAIL PROTECTED] writes:
Does harddrake2 pick up ISA pnp devices?
no
Guillaume Cottenceau wrote:
Felix Miata [EMAIL PROTECTED] writes:
[...]
bugged and doesn't report failures, or your floppy has an
hardware failure that didn't report to the floppy drive during
bootdisk creation but lead to a misread when you tried to boot
with it. I would favor
Guillaume Rousse [EMAIL PROTECTED] writes:
Le Mardi 10 Septembre 2002 13:23, dcd a écrit :
Hi,
I don't understand why these drivers are excluded. They are a free
download from NVidea, and currently it only hurts the distro that 3d is
so poor in the standard edition.
Do you ever
Following up to my own message:
installed RC1 over beta3. Upon launching Gnome2 the system freezes hard.
I've looked into this and found that the launch of gnome-settings-daemon
is likely the moment that the freeze occurs.
I have tracked this down to be (likely) related to the use of the
On 9 Sep 2002, Juan Quintela wrote:
danny == [EMAIL PROTECTED] writes:
danny On Mon, 9 Sep 2002, Jaroslaw Chodak wrote:
If You try copy files to
disk there's not enough space on it system break down and only reset
button help
you.
danny There is a second bug in supermount
Hello,
I have a DELL Latitude CPI A366XT laptop and the default
install have installed XF86_SVGA 3.3.6.
I've changed it with Drakconf and Xfree 4.2.1 works fine.
Why install XF86_SVGA by default ?
Thanks
Here my lspcidrake -v output :
--
EXCEPTIONNEL!
Tiscali lance les forfaits
tarvid [EMAIL PROTECTED] writes:
On Tuesday 10 September 2002 05:58 am, Guillaume Cottenceau wrote:
Jim Tarvid [EMAIL PROTECTED] writes:
On Monday 09 September 2002 05:56 am, you wrote:
Jim Tarvid [EMAIL PROTECTED] writes:
A network.img from cooker 2002-05-09 works on a box where
On Tue, 2002-09-10 at 12:06, Valéry Raulet wrote:
Charles A Edwards wrote:
On Mon, 9 Sep 2002 17:43:07 +0100
Mark Watts [EMAIL PROTECTED] wrote:
Is there a fix to get console fb working with this card, or do I have
to wait for an update to the fb stuff in the kernel ?
Dear Developers,
Just now i installed MDk-9.0 RC2 and configured the
Internet conneection sharing, and this still doesn't
wor.
In RC1 the error message was in installing dhcp-server
package. Here all pacakgaes are successfully getting
isntalled.
Also i noticed that once i configured the
On Tue, Sep 10, 2002 at 01:56:43PM +0200, Nora Etukudo wrote:
export DURING_INSTALL=YES
If I comment this out, the 'rpm -i ' works again, but then in some
Sorry, I was lying. Above 'DURING_INSTALL' doesn't matter at all.
And, 'rpm -e ' is hanging either.
What is the correct way
tarvid [EMAIL PROTECTED] writes:
reverse name lookup on DNS failed (this succeeds on the 2002-05-09 cooker
version)
just tested with both DHCP and Static ip attribution, works for
me. are you sure you don't have a problem on your side (dns
server)?
--
Guillaume Cottenceau -
1. DE Typo during installation. as the software installs it reads
something like '...Danke für Ihre Gerduld...' were Geduld is the right
spelling.
2. When installing with a USB Mouse and PS2 keyboard, the install works
well, but when starting after install, the keyboard is mistakenly
entered as
--- Leon Brooks [EMAIL PROTECTED] wrote:
On Tue, 10 Sep 2002 12:19:15 +0100
Crispin Boylan [EMAIL PROTECTED] wrote:
on my tuxkart (0.1.0-4mdk) when you start the game
Tux and his kart
just plummet downwards through the track - why is
this?
Do you have the Neutronium texture installed,
Richard Burt [EMAIL PROTECTED] writes:
1. After installing software, the cdrom cannot be unmounted
except by root. I assume that the package installer is grabbing
it and not releasing it afterwards.
Francois, WDYT?
2. I have a USB2 external cd-rw. Occassionally, the special
device
On Sat, 2002-09-07 at 12:10, David Walluck wrote:
2.) How can I run mkinitrd with a different root (i.e. /mnt) if I do
happen to get the system to boot some other way?
# chroot /mnt ; mkinitrd ARGS ; exit
--
Brad Felmey
http://pvrusb.sourceforge.net/
--
EXCEPTIONNEL!
Tiscali lance les forfaits Internet Illimités,
à partir de 15,95EUR / mois.
Pour en profiter,cliquez ici: http://register.tiscali.fr/forfaits/
Offres soumises à conditions.
Philip Webb [EMAIL PROTECTED] writes:
020910 Guillaume Cottenceau wrote:
Philip Webb [EMAIL PROTECTED] writes:
in the old (somewhat defective) Softdrake in Mandrake 8.2
there was a single display which could be switched between 'install-ed/able'.
IMHO it was bad design.
well, that's
Guillaume Cottenceau [EMAIL PROTECTED] writes:
[EMAIL PROTECTED] (François Pons) writes:
Guillaume Cottenceau [EMAIL PROTECTED] writes:
Richard Burt [EMAIL PROTECTED] writes:
1. After installing software, the cdrom cannot be unmounted
except by root. I assume that the
On Tue, 2002-09-10 at 12:19, Crispin Boylan wrote:
Hi
on my tuxkart (0.1.0-4mdk) when you start the game Tux and his kart just
plummet downwards through the track - why is this?
nVIDIA (29.60) drivers loaded and working, XFree86 4.2.1, Mesa 4.0.3-6mdk
Try one of the other tracks - this
On Tue, 10 Sep 2002 13:20:25 +0200, Reinout van Schouwen wrote:
This message is in MIME format. The first part should be readable text,
while the remaining parts are likely unreadable without MIME-aware
tools. Send mail to [EMAIL PROTECTED] for more info.
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
François Pons wrote:
| Guillaume Cottenceau [EMAIL PROTECTED] writes:
|
|
|Richard Burt [EMAIL PROTECTED] writes:
|
|
|1. After installing software, the cdrom cannot be unmounted
|except by root. I assume that the package installer is grabbing
|it
Felix Miata [EMAIL PROTECTED] writes:
Is the floppy full? What happens when you try to copy the
contents to the hd? And when you try to mount it? And when you
try to read the files on it?
OS/2 listing of floppy:
FYI, I've finally taken the time to reproduce. I'm investigating.
Thanks
Norman Cleesattel [EMAIL PROTECTED] writes:
[...]
7. Mandrake First Time (or firststart) does not start on the first
start, but on the second or third reboot. (when everything is already
configured ;)
Sorry? What happened at firsts (re)boots? Was you able to log in kde/gnome?
On Tue, 2002-09-10 at 12:52, Richard Burt wrote:
Just installed and tested RC2. Wow!
After the dismal failures of B1,B2, B4 and RC1, I was not looking
forward to installing RC2 but I have been proven wrong. Everything
appears to work fine.
A couple of bugs/gripes though:
1. After
On Sat, 2002-09-07 at 02:20, Digital Wokan wrote:
On Friday 06 September 2002 12:04 am, Randy Welch wrote:
Yay! they fixed mouse replug events. the mouse might finally work
after switching consoles on the KVM! :-
I will be a happy camper if this is true. A workaround was to
On Tue, 2002-09-10 at 14:57, Leon Brooks wrote:
On Tue, 10 Sep 2002 20:05, Chris Picton wrote:
My maximum mode is exactly the same as before, but I have many more low
resolution modes.
For my monitor, the full list available modes I get is:
[57 modes deleted]
You want to hit
Ooops! damn foot in mouth again.
Rephrase that, to what I meant, instead of what I said. (Yes I do
know the definition of FREE )
Wouldn't it be a better policy to refer people to, or notify them of,
the availability of the Nvidea 3D drivers,
and install the current XFree86 4.2.. drivers
I don't know exactly where is my problem or mistake. So i am going to describe
my probleme :
i have ps/2 keyboard(105) and a usb mouse. my linux mandrake cooker, may
kernel 2.4.19-8mdk
When i boot i need to enter in the interractive boot to use the systeme. when
i arrive under X, i
--- profile 2002-08-26 15:14:24.0 +0200
+++ profile.new 2002-09-10 17:07:06.0 +0200
-11,7 +11,7
fi
if [ $UID -ge 500 ] ! echo ${PATH} |grep -q /usr/games ; then
-export PATH=$PATH:/usr/games
+PATH=$PATH:/usr/games
fi
umask 022
Adam Williamson wrote:
On Tue, 2002-09-10 at 12:52, Richard Burt wrote:
Just installed and tested RC2. Wow!
After the dismal failures of B1,B2, B4 and RC1, I was not looking
forward to installing RC2 but I have been proven wrong. Everything
appears to work fine.
A couple of bugs/gripes
Guillaume Cottenceau wrote:
Felix Miata [EMAIL PROTECTED] writes:
OS/2 listing of floppy:
is this really an OS? hum, sorry.
Made by the biggest computer company on the planet.
http://www-3.ibm.com/software/os/warp/
5 file(s)1025240 bytes used
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Daouda LO wrote:
| Norman Cleesattel [EMAIL PROTECTED] writes:
|
| [...]
|
|
|7. Mandrake First Time (or firststart) does not start on the first
|start, but on the second or third reboot. (when everything is already
|configured ;)
|
|
| Sorry? What
1. DE Typo during installation. as the software installs it reads
something like '...Danke für Ihre Gerduld...' were Geduld is the right
spelling.
2. When installing with a USB Mouse and PS2 keyboard, the install works
well, but when starting after install, the keyboard is mistakenly
entered as
Guillaume Cottenceau wrote:
Richard Burt [EMAIL PROTECTED] writes:
1. After installing software, the cdrom cannot be unmounted
except by root. I assume that the package installer is grabbing
it and not releasing it afterwards.
Francois, WDYT?
Using the Mandrake package installer, after
Felix Miata [EMAIL PROTECTED] writes:
[...]
Is the floppy full? What happens when you try to copy the
contents to the hd? And when you try to mount it? And when you
try to read the files on it?
OS/2 listing of floppy:
is this really an OS? hum, sorry.
5 file(s)
fresh install of rc2, with a sblive on alsa.
I play a midi file.
That sounds bad, some instruments seems to be missing, and the volume
keeps changing just as if someone was playing with the volume button
with a period of ~= 5s.
(hopefully with the sblive I can load soundfonts and play with
On Sat, 7 Sep 2002, Henri wrote:
There is a VERY annoying bug with msec at level for : ooffice won't
launch for users which are not in the group allowed to see config files,
as selected during installation.
The problem was even worse than that. :-/
Please correct this, I don't want to make
On Tue Sep 10 10:30 +0200, Combelles, Christophe (MED, ALTEN) wrote:
There is a bad behaviour of diskdrake (and also a bad message) when
diskdrake is started and when a device is no more available through
supermount.
for example :
plug and switch on a usb device so that a dynamic icon
On Tue, Sep 10, 2002 at 10:19:40AM +0200, François Pons wrote:
urpmi of 8.2 is not solid enough to do system upgrade,
But it did. :-)
but urpmi of 9.0 is
right. This means a urpmi of 9.0 compiled for 8.2 will be done as updates and
will authorize such upgrade.
Will this be done? Will
François Pons wrote:
Henri [EMAIL PROTECTED] writes:
Hi,
each time i want to install something with urpmi, i've got towait for ten
minutes it stops searching my empty cd-drive, or i have to put any cd in it to
make it stop.
I've got a got an ide cd-burner (emulated as scsi),
Disable
On Tuesday 10 September 2002 09:41 am, Guillaume Cottenceau wrote:
tarvid [EMAIL PROTECTED] writes:
On Tuesday 10 September 2002 05:58 am, Guillaume Cottenceau wrote:
Jim Tarvid [EMAIL PROTECTED] writes:
On Monday 09 September 2002 05:56 am, you wrote:
Jim Tarvid [EMAIL PROTECTED]
Hi
gone through the whole install with RC2 successfully including testing of
the X configuration.
After reboot if I want to launch into X the system locks up.
I have a 3Com USB PC Camera connected to the system (identifies it as
vicam) and when I launch X I see the light on the camera come
Gwenole Beauchesne wrote:
On Sat, 7 Sep 2002, Henri wrote:
There is a VERY annoying bug with msec at level for : ooffice won't
launch for users which are not in the group allowed to see config files,
as selected during installation.
The problem was even worse than that. :-/
On Tue, 10 Sep 2002 12:19:15 +0100
Crispin Boylan [EMAIL PROTECTED] wrote:
on my tuxkart (0.1.0-4mdk) when you start the game Tux and his kart
just plummet downwards through the track - why is this?
Do you have the Neutronium texture installed, but not Penguin Black? Perhaps
he became too
Guillaume Cottenceau wrote:
Also, a big
problem is that floppies are very likely to have hardware
failures. Many times with similar bugs we spent time trying to
investigate, just to see that it was only due to h/w failure, so
most of the times we don't bother.
For what it's worth, I had
On Tue, 2002-09-10 at 12:51, Tom Whiting wrote:
It's not that simple.
Yes, it is.
Mandrake overpacks the CD's plain and simple.
No, it doesn't.
While 650 is starting to be the low standard, umm, 700m is pushing the limit.
Personally, my burner can handle 689m (that's the most i've
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
The Radeon 7500 still doesn't work out the box on 9.0 (in fact, gives a
blank screen and dies), but it does work (with glx) if you rename the
theatre_drv.o and rerun XFdrake.
It would be nice to have this fixed in final.
Buchan
- --
The DisplayManager(kdm) won't start on boot, If I login as root after booting
and do an /etc/init.d/dm start it works ok.
Also the /usr/shared/config/kdm/kdmrc keeps getting reset,
ie. ShowUsers keeps being reset to all, even after I edit it manually
to be NotHidden
Richard Burt [EMAIL PROTECTED] writes:
2. I have a USB2 external cd-rw. Occassionally, the special
device /dev/scd0 could not be found and would require a reboot
before i could use it.
What gives ls /dev/scd0? Doesn't it revive the device?
ls /dev/scd0 does nothing.
Titi, any idea?
Understood.
Thanks,
Devin
On Tue, 2002-09-10 at 01:06, Frederic Crozat wrote:
Le Mon, 09 Sep 2002 17:24:50 +, Devin Heitmueller a écrit :
The Mandrake cooker currently includes libxml2-2.4.23-4. However, there
were several bugs fixed in 2.4.24 (the latest stable - released Aug
Le Mardi 10 Septembre 2002 15:43, Götz Waschk a écrit :
Am Dienstag, 10. September 2002, 20:53:45 Uhr MET, schrieb dcd:
I don't understand why these drivers are excluded. They are a free
download from NVidea, and currently it only hurts the distro that 3d is
so poor in the standard
Am Dienstag, 10. September 2002, 20:53:45 Uhr MET, schrieb dcd:
I don't understand why these drivers are excluded. They are a free
download from NVidea, and currently it only hurts the distro that 3d is
so poor in the standard edition.
You are either a troll or you don't understand the
Florent BERANGER[EMAIL PROTECTED] writes:
I have a DELL Latitude CPI A366XT laptop and the default
install have installed XF86_SVGA 3.3.6.
I've changed it with Drakconf and Xfree 4.2.1 works fine.
Why install XF86_SVGA by default ?
neomagic driver was distrusted. Changing this (since there
Jose [EMAIL PROTECTED] writes:
I have two cdrom drives, as you can see below. After a rc1 upgrade the
installer removed both of my cdrom drives (which work fine) from
/etc/fstab.
can you send me /root/drakx/report.bug.gz?
I have a generic laptop with Toshiba DVD. The install program will not boot
from the CD. I made a floppy (using dd). After the program loads from the
floppy, the installation program cannot find the Mandrake installation disk
(i.e. the install program cannot find the DVD-CDROM). The media
--- Charles A Edwards [EMAIL PROTECTED] wrote:
On Tue, 10 Sep 2002 12:19:15 +0100
Crispin Boylan [EMAIL PROTECTED] wrote:
on my tuxkart (0.1.0-4mdk) when you start the game
Tux and his kart
just plummet downwards through the track - why is
this?
nVIDIA (29.60) drivers loaded and
I have the same problem with my canon 110
Combelles, Christophe (MED, ALTEN) wrote:
Just after install of rc2, I plug and power on my sony s75 camera on
USB port.
An icon appears on KDE desktop, OK
I then power it off, and unplug it.
The icon does not disappear and remains forever.
On Tue, Sep 10, 2002 at 06:31:19AM +, Jose wrote:
I noticed on a fresh install that one of my students was trying to open
up a zip package from within Kde, but it wouldn't open up because ark
complained that zip was not installed. Shouldn't ark's depend on zip
and unzip?
No because ark
Am Dienstag, 10. September 2002, 09:51:17 Uhr MET, schrieb Ben Reser:
On Tue, Sep 10, 2002 at 06:31:19AM +, Jose wrote:
I noticed on a fresh install that one of my students was trying to open
up a zip package from within Kde, but it wouldn't open up because ark
complained that zip was
Le Mardi 10 Septembre 2002 17:36, vous avez écrit :
Florent BERANGER[EMAIL PROTECTED] writes:
I have a DELL Latitude CPI A366XT laptop and the default
install have installed XF86_SVGA 3.3.6.
I've changed it with Drakconf and Xfree 4.2.1 works fine.
Why install XF86_SVGA by default ?
My thanks and congratulations to Laurent et al for the nice work on
today's kde. Wow it is fast now! Takes less than 10 seconds to boot
up and 1 second for Kapps to open.
One or two little flies in the pies. 1: the tooltips option is still
greyed out in panel config of kcontrol and is
Hiwhen trying to configure eth1 (a wireless lan pcmcia card) using
the wizard in Mandrake Control center, when i finish entering details
such as WEP encryption key and such and proceed to finish the config
process, the wizard hangs and will not complete without me ejecting
pcmcia card in
Hi,
The problem was even worse than that. :-/
Thanks for reply ! So what is really the problem ? what do you mean by
even worse ?
launch for users which are not in the group allowed to see config
files is not enough. Actually, OOo needs access to /proc/pid/cmdline,
which is not available
On Tue, Sep 10, 2002 at 06:55:06PM +0200, Götz Waschk wrote:
Come on, the kde packages depend on so many other not really needed
stuff, these two additional packages won't make a difference.
As I find things that shouldn't be required that are I recommend that
they be removed. In most cases
On Tue, 10 Sep 2002 13:49:22 +0100
Crispin Boylan [EMAIL PROTECTED] wrote:
it appears that tuckart-0.20 has been released
Tux Tollway still exhibits the same behaviour in 0.2.0
Charles
--
It's not so hard to lift yourself by your bootstraps once you're off the
ground.
020910 Guillaume Cottenceau wrote:
Felix Miata [EMAIL PROTECTED] writes:
I don't see how you can release a product incapable
of creating a rescue floppy either during or post install.
It's not a rescue floppy, it's a boot floppy. To rescue your system,
insert the 1st CD and type in rescue
On Tuesday 10 September 2002 09:52 am, Guillaume Cottenceau wrote:
tarvid [EMAIL PROTECTED] writes:
reverse name lookup on DNS failed (this succeeds on the 2002-05-09 cooker
version)
just tested with both DHCP and Static ip attribution, works for
me. are you sure you don't have a problem
Please look at the attached snapshot.
I just performed a clean install and this is what modules.conf and lsmod say.
Sound is broken from the start.
I know how to fix it, but your average newbie will not!
Thx,
R.Fox
snapshot2.png
Description: PNG image
Hi
gone through the whole install with RC2 successfully including testing of
the X configuration.
After reboot if I want to launch into X the system locks up.
I have a 3Com USB PC Camera connected to the system (identifies it as
vicam) and when I launch X I see the light on the camera come
| [...]
|
|
|7. Mandrake First Time (or firststart) does not start on the first
|start, but on the second or third reboot. (when everything is already
|configured ;)
|
|
| Sorry? What happened at firsts (re)boots? Was you able to log in
kde/gnome?
It's probably X being killed at the
On Tue, 2002-09-10 at 08:14, Chris Picton wrote:
I am referring to apps which do their own mode switching, like
fullscreen mode in enlightenment, mplayer, xmame, SDL games, etc etc.
AMEN
--
Brad Felmey
Frederic Crozat wrote:
Le Mon, 09 Sep 2002 15:00:35 +, Bryan Whitehead a écrit :
I think i traced down the problems I'm having with mozilla 1.1
--enable-xinerama is not being passed to configure at all...
Really ? I don't know where you found that.. Mozilla IS compiled with
On Mon, 2002-09-09 at 14:07, Thierry Vignaud wrote:
Danny Tholen [EMAIL PROTECTED] writes:
Seems that Thierry screwed up:)
He did not package the new versions of wine-config.pl and
wine-launcher.sh.
i used what you give me
Thierry, if you do not have my original files anymore, I
hi,
gcvs is not working
when i tell him to do something ( like update something ) ,
he just tells me that unknown parameter given to cvs..
then i downloaded gcvs from www.cvsgui.org,
and noticed that in their distribution they have a patched version of
cvs which is in their folder (so
Henri wrote:
Austin Acton wrote:
It's called gtklp.
It's in contribs, and it's good.
Austin
On Mon, 2002-09-09 at 19:06, Henri wrote:
Hi,
I'm a little bit confused with RC1 ( RC2 will be at home tomorow :-) ) :
Can't we print and watch the printing queue easily in graphical mode ??
Claudio [EMAIL PROTECTED] writes:
This is how quota work on current Cooker (RC2)
[root@sfigatto root]# uname -a
Linux sfigatto.roma2.infn.it 2.4.19-9mdk #1 Sat Sep 7 00:51:47 CEST 2002
[root@sfigatto root]# quota -v claudio
Disk quotas for user claudio (uid 501):
Filesystem blocks
On Tue, 10 Sep 2002 18:46:54 +0200, Alexander Skwar wrote:
Hi.
I'm running a current cooker system. When I use the Mandrake Mozilla
and/or Galeon packages and go to some sites, I cannot click form submit
buttons. An example site is http://www.falk.de/. When I use the official
Mozilla
Frederic Crozat wrote:
--=-=-=
* Tue Sep 10 2002 Frederic Crozat [EMAIL PROTECTED] 2.1.5-114mdk
- Update patch0 to no longer remove /dev/null after updating menu (grr), clean
packages lists obtained from rpm
- update patch12 to no longer fork update-menus for simplified menu
So this is
I get this message during boot - but everything seems to be OK - the
SCSI host adapter seems to work correctly:
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
Thx,
R.Fox
I have performed again an absolutly fresh install on my test notebook (Gateway
9150LX) using Cooker.
Linuxconf fails to start using the menu (icon) or from the CLI.
Please see attached snapshot:
Thx,
R.Fox
attachment: snapshot1.jpg
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Kenton Groombridge wrote:
| I have to rebuild mozilla with gcc 3.2 so java will work. While I do it
| I might as well build it for my athlon platform. I don't do it for a
| speed increase, I just rebuild them when I have to.
Ummm, that's going to
Has anybody reported this to Steve Baker?
--- Charles A Edwards [EMAIL PROTECTED] wrote:
On Tue, 10 Sep 2002 13:49:22 +0100
Crispin Boylan [EMAIL PROTECTED] wrote:
it appears that tuckart-0.20 has been released
Tux Tollway still exhibits the same behaviour in
0.2.0
Charles
Why isn't the sard patch not applied to the 2.4.19 kernel? This patch
has been applied to previous kernels that you ship. I have a storage
performance monitor that requires this patch to be supplied. Can you
please have it for you next kernel build? I would really like to have
it in your 9.0
Warly wrote:
Serge Pl|ss [EMAIL PROTECTED] writes:
Hi
I was just wondering upon installing RC2. Whatever happened to the
x3270 program? It's not been in any of the beta's/rc's but it is in
cooker.
It is in contribs, contribs are not included in download edition, see
on mirrors.
Crispin Boylan wrote:
Hi
i've just installed the latest XEmacs package (21.4.9-2mdk) but now I
seem to have lost the keyword colouring in java files - i get a
warning buffer saying
(1) (warning/warning) Autoload error in:
//usr/share/xemacs-21.4.9/lisp/auto-autoloads:
Already
On Mon, Sep 09, 2002 at 10:46:22PM -0700, Ben Reser wrote:
* Tue Sep 10 2002 Han Boetes [EMAIL PROTECTED] 0.1.11-2mdk
- Added bugfix1 patch.
Which does what?
/ 0.1.11 bugfix 2 patch / 2002.09.10-12:20 CET
Get it here.
This includes the first patch and fixes a deadlock that was
Where can I report bugs
?
101 - 200 of 313 matches
Mail list logo