i have just tried to upgrade my s(m)nf from the current cooker tree, it
failed saying there wasn't enough space, how big do partitions have to be to
upgrade, i have two 520mb hard disks, one of which is /usr, i only have
snf-en installed fron the 8.2 distro
bascule
--
'Detectoring is like
hi,
my point is that the 8.2 release of lm does not come with the version of mnf
that will be in the iso, right? the iso version is later than that surely,
even if it is based on 8.2?
so i was wondering whether the mnf packages in lm9.0 will be the same as the
iso or later, i intend to buy a
i managed to install the mnf in cooker today but somehow avoided installing
any docs, there are no man pages, 'urpmq doc' gives lots of doc packages,
i've installed mandrake_doc-en, what else should have gone with an mnf
install?
i did the minimal install possible due to space considerations,
Ben Reser wrote:
Even with an insignificant performance problem (which is debatable).
It would have little purpose. As an admin a tool like this wouldn't
give me better sleep. As I've pointed out before there have been ways
found around such tools. The only better sleep I get is by
Warly [EMAIL PROTECTED] writes:
Soon on mirrors:
729313280 MandrakeLinux-9.0rc3-CD1.i586.iso
734199808 MandrakeLinux-9.0rc3-CD2.i586.iso
417058816 MandrakeLinux-9.0rc3-CD3.i586.iso
Sorry, I check the wrong ISOs.
Correct files name, size and md5:
[mandrake@malibu i586]$
- Original Message -
From: Thomas Backlund [EMAIL PROTECTED]
Viestissä Keskiviikko 18. Syyskuuta 2002 20:14, Edward Cherlin kirjoitti:
On Wednesday 18 September 2002 04:38 am, Thomas Backlund wrote:
As it turns out the install sets all the locale settings to 'en_US',
even if it
Okay it worked :-) THX a lot... urpmi seems to work too now, rpmdrake is
segmenting fault.
I'm going deeper to find why
Cheers
Jeremy
Le mer 18/09/2002 à 19:45, Frederic Lepied a écrit :
Jeremy Lacroix [EMAIL PROTECTED] writes:
All rpm command are faulty. So rpm --rebuilddb and rpm
On Thu, Sep 19, 2002 at 08:15:23AM +0200, Giuseppe Ghibò wrote:
Well, and if the patch doesn't exists yet? And furthermore I repeat,
in most cases there aren't ANY sysadmin who worries about upgrades.
It exists it just hasn't been kept up to date with the current gcc...
Which I have to wonder
I have a Compaq Armada M700 notebook which I have successfully installed
Cooker at least 15 times on in the past 3 months.
The last few kernel updates have introduced some instability and
lock-ups on this notebook. After a period of being up, the system hard
freezes and has to be manually
On Thu, Sep 19, 2002 at 02:47:26AM -0400, Andrew Bielecki wrote:
Hi,
The only time I had this problem if I try to upgrade kernel twice (or
more) without rebooting the system and removed older kernels. If the
loop back device will get removed (auto cleaned), then the second time
you try to
On Wed, 18 Sep 2002, allen wrote:
What will the process be that Mandrake will go through to
make a 9.x available for new AMD and Intel 64bit chips ?
There will be an MDK 9.x for x86-64 cpus when they are released. There
*is* a version for Itanium 1 but that's an 8.1.
Hi,
I'm a bit out of my depth technically here, but I'll try my best. I'll
happily send in more log files if requested:
On expert install of RC3, I specified a standard USB mouse. This mouse
did not work upon 1st boot.
From /var/log/:
[root@damon log]# grep usb *
autologin.log:(EE)
Hi,
Did an expert install, RC3. Specified autologin of sole user into
Gnome, which failed. From autologin.log:
XFree86 Version 4.2.1 / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 3 September 2002
If the server is older than 6-12 months, or if
Am Donnerstag, 19. September 2002, 20:30:31 Uhr MET, schrieb Damon Lynch:
I'm a bit out of my depth technically here, but I'll try my best. I'll
happily send in more log files if requested:
On expert install of RC3, I specified a standard USB mouse. This mouse
did not work upon 1st boot.
Damon Lynch wrote:
Hi,
I'm a bit out of my depth technically here, but I'll try my best. I'll
happily send in more log files if requested:
On expert install of RC3, I specified a standard USB mouse. This mouse
did not work upon 1st boot.
From /var/log/:
[root@damon log]# grep usb *
Florent BERANGER [EMAIL PROTECTED] writes:
I didn't saw WinTV USB WinTV USB PVR cards in usbtable
(ldetect-lst).
Is anyone who have one can send the output of lspcidrake
-v command to this ml ?
the usbtable don't have to list all devices the same way pcitables
does since for most devices,
[EMAIL PROTECTED] (Robert Fox) writes:
The latest Daksec - when you click on the various tabs (networking,
System Options, Priodic Checks) - it say above:
The following options can be set to customize your system security. If
you need explanations, click on Help.
THERE IS NO HELP TO
On Thu, 2002-09-19 at 20:40, Götz Waschk wrote:
Hi,
I have the same problem. Do you also have /usr on a separate
partition? If so, try to copy /usr/bin/expr to /bin
Yes I have /usr on a separate partition from /
I'll try that and get back to you on the next reboot!
Hi Florin,
Expert install of RC3 onto a machine with 2 rtl8139. Internet
connection sharing fails. Network itself set up during install:
eth0: connects to LAN, configured as 192.168.0.1 during install
eth1: connects to cable modem, configured with fixed IP during install
from command prompt,
On Thu, 2002-09-19 at 11:00, Warly wrote:
[EMAIL PROTECTED] (Robert Fox) writes:
The latest Daksec - when you click on the various tabs (networking,
System Options, Priodic Checks) - it say above:
The following options can be set to customize your system security. If
you need
hello, this is more cosmetical than functional, but ..
after fresh install and choose to start with graphical interface i see
this last messages in framebuffer window after reboot:
input/output error - cannot open console
after next reboot it is not show, maybe devfs create this device..(?)
Running printerdrake for the 1st time after expert install.
Damon
odbc.ini
[test]
Description = MySQL database test
Driver = MySQL
Server = localhost
Database= test
Port= 3306
Socket =
Option =
Stmt=
odbcinst.ini
[MySQL]
Description = ODBC for MySQL
Driver =
Ben Reser [EMAIL PROTECTED] writes:
On Thu, Sep 19, 2002 at 08:27:38AM +0200, Warly wrote:
[...]
[mandrake@malibu i586]$ ls -l *9.0*
-rw-r--r--1 mandrake mandrake 416645120 Sep 18 11:10
MandrakeLinux-9.0rc3-i18n.i586.iso
-rw-r--r--1 mandrake mandrake 728596480 Sep 18 08:19
[snip : Stackguard fart]
This should be taken up with the ISO C standardization committee so
that boundary checking becomes an optional language feature (giving
us a well thought out choice) instead of forcing a stopgap measure on
everybody...
[snip : to the point security reply by Ben]
why not
Damon Lynch wrote:
On Thu, 2002-09-19 at 20:40, Götz Waschk wrote:
Hi,
I have the same problem. Do you also have /usr on a separate
partition? If so, try to copy /usr/bin/expr to /bin
Yes I have /usr on a separate partition from /
I'll try that and get back to you on
Laurent MONTEL wrote:
--=-=-=
Name: kdenetwork Relocations: (not relocateable)
Version : 3.0.3 Vendor: MandrakeSoft
Release : 15mdk Build Date: Mon Sep 16 07:52:38 2002
Install date: (not installed)
On Wed, 18 Sep 2002, Todd Franklin wrote:
I personally have almost 6000 unread emails in the cooker group alone,
but i'm not upset about it! If anything it's like having a personal
database for when i run accross a bug. Even if I don't have time to
read them all, if I come accross a
Hi Till,
When I 1st ran printerdrake, I didn't notice that lprng was set as the
printing system. I rebooted, ran it again, and that's when I noticed.
I was wondering why the remote cups printer was not showing up!! ;-)
Damon
Hi,
I removed the duplicate entry for eth0 in /etc/shorewall/interfaces by
commenting out a line, so it is now like this:
net eth1detect
masqeth0detect
#loceth0detect
after restarting shorewall and dhcpd, it now works.
Damon
On Thu, 2002-09-19 at 21:00, Damon Lynch wrote:
On Thu, 2002-09-19 at 20:40, Götz Waschk wrote:
Hi,
I have the same problem. Do you also have /usr on a separate
partition? If so, try to copy /usr/bin/expr to /bin
Yes I have /usr on a
Am Donnerstag, 19. September 2002, 21:35:18 Uhr MET, schrieb Damon Lynch:
I rebooted, and it seemed to work now after executing the copy command
you suggested.
This was just a workaround. The next release of initscripts,
6.91-10mdk should work out of the box.
--
Götz Waschk master of
Hi Till,
On Thu, 2002-09-19 at 22:18, Till Kamppeter wrote:
Is LPRng installed on your system? Did you install from scratch or did
you do an update?
Till
I did an expert install (not upgrade), overwriting all except /home,
/boot, and /opt. /opt is irrelevant of
Brad Felmey wrote:
On Wed, 2002-09-18 at 13:22, Bryan Whitehead wrote:
Testing one of our 2GB Dual-Pentium III (1ghz) machines we get a hard
lock with kernel enterprise.
kernel-enterprise-2.4.19.9mdk-1-1mdk.i586.rpm
The lock up seems to be related to the scsi driver. aic7xxx. The last
H. Narfi Stefansson [EMAIL PROTECTED] writes:
RC3: Just before installing the bootloader, the installer got stuck in a
loop, it kept asking for installation cd 1, I put it in, it ejected it and
asked for it again. We argued like this for a while, I tried to put all 3
of the CDs in several
I have the latest MKCD installed (mkcd-3.3.3-1mdk)
I ran the following:
[root@amda7v Cooker]# mkcd --discsize 73400 -a /mnt/hd/cooker -t
/mnt/disk/iso
This is what I got:
[root@amda7v Cooker]# ll
total 2614720
-rw-r--r--1 root root 732594176 Sep 19 13:29 1-Cooker.iso
H. Narfi Stefansson [EMAIL PROTECTED] writes:
RC3: Just before installing the bootloader, the installer got stuck in a
loop, it kept asking for installation cd 1, I put it in, it ejected it and
asked for it again. We argued like this for a while, I tried to put all 3
of the CDs in several
Seem to be having problems with latest supermount. When I insert a cd and
view it in GNOME, everythings fine, until I try to eject the cd, in which
case the cd drive is locked and I have to right-click on the cd drive icon
and select Eject. Then when I insert a new cd, I have to unmount and
Ben Reser [EMAIL PROTECTED] writes:
On Wed, Sep 18, 2002 at 10:34:31PM -0400, Chuck Lalli wrote:
Should I run modprobe loop and then try to reinstall? I have not rebooted, it
is still as it was, from past experience I need to correct the vmlinuz link
before rebooting. What can I do to
I'm getting the dreaded :
Cannot initialize the Ximian Evolution shell: Configuration Database not found
error on a fresh install of RC-3.
It seems that plugins in Konqueror got broken again with RC3.
--
***
Henrik Nordhus
[EMAIL PROTECTED]
The RC3 is missing a (non-critical) package: kdeartwork-extras
At least I think that was the name. It contains among other things the 'Glow'
window decoration.
--
***
Henrik Nordhus
[EMAIL PROTECTED]
Bill Shirley [EMAIL PROTECTED] writes:
Just an update. I ran across an idea from a forum on the net
and put garbage in smtpd.conf and postfix/smtpd complains.
That says smtpd is reading the file and permissions are ok.
SASL apparently doesn't use what's there. I've tried it with
[EMAIL PROTECTED] (Robert Fox) writes:
I have the latest MKCD installed (mkcd-3.3.3-1mdk)
I ran the following:
[root@amda7v Cooker]# mkcd --discsize 73400 -a /mnt/hd/cooker -t
/mnt/disk/iso
This is what I got:
[root@amda7v Cooker]# ll
total 2614720
-rw-r--r--1 root root
Bill Shirley [EMAIL PROTECTED] writes:
Ah, success. saslauthd puts it's socket (file called mux in
/var/lib/sasl and sasl client tries to connect in
/var/state/saslauthd directory, which does not exists. A
ln -s /var/lib/sasl /var/state/saslauthd will fix this.
smtp auth works again!!
Jeremy Lacroix [EMAIL PROTECTED] writes:
Okay it worked :-) THX a lot... urpmi seems to work too now, rpmdrake is
segmenting fault.
At what point? Anything in the logs? are you sure rpm/urpmi do
work?
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
[EMAIL PROTECTED] (Robert Fox) writes:
I have a Compaq Armada M700 notebook which I have successfully installed
Cooker at least 15 times on in the past 3 months.
The last few kernel updates have introduced some instability and
lock-ups on this notebook. After a period of being up, the
On Thu, 19 Sep 2002 13:13:02 +0100, O'Riordan, Kevin wrote:
Seem to be having problems with latest supermount. When I insert a cd and
view it in GNOME, everythings fine, until I try to eject the cd, in which
case the cd drive is locked and I have to right-click on the cd drive icon
and
On Thu, 19 Sep 2002 07:21:32 +, Texstar wrote:
I'm getting the dreaded :
Cannot initialize the Ximian Evolution shell: Configuration Database not
found
Try oaf-slay and start evolution again..
--
Frederic Crozat
MandrakeSoft
Bryan Whitehead [EMAIL PROTECTED] writes:
Mandrake? any comment? or tips to resolve this?
I've forwarded to the kernel team. I don't know if Juan will have
the time to look over it..
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
There is a security patch at:
http://www.strongsec.com/freeswan/x509patch-0.9.15-freeswan-1.98b.tar.gz
That fixes the following possible security problem ...
Version 0.9.15
--
- For security reasons the shell metacharacters ', , `, $, and \
are replaced by their octal escape values
Chuck Lalli [EMAIL PROTECTED] writes:
Should I run modprobe loop and then try to reinstall? I have not rebooted, it
is still as it was, from past experience I need to correct the vmlinuz link
before rebooting. What can I do to help?
First, verify if devfsd is running and if the loop
On Thu, 2002-09-19 at 14:50, Guillaume Cottenceau wrote:
[EMAIL PROTECTED] (Robert Fox) writes:
I have a Compaq Armada M700 notebook which I have successfully installed
Cooker at least 15 times on in the past 3 months.
The last few kernel updates have introduced some instability and
I ran drakgw and got some errors in the background (see below).
I found that the gateway was setup correctly but shorewall was blocking
the connection - when I stopped shorewall (after running drakgw)
everything worked fine. There's something wrong with the shorewall
config together with
The progress bar isn't functioning as well as the close window when burning
files to a CDR. The only way to get out of the program is to exit and
restart.
RC3 Fresh install.
When trying to install windows font, drakfont crashes half way through 2nd
step -copy fonts to system, looking at the console I see the list of fonts
being copied over and this stops.
When I forcibly kill drakfont, I am unable to unmount my windows folder - it
complains that the device is busy.
urpmi.addmedia CD1 file://rpms
added medium CD1
reading rpm files from [/rpms]
unable to read rpm files from [/rpms]: bad rpm
/rpms/imwheel-0.9.9-3mdk.i586.rpm
no hdlist file found for medium CD1
examining synthesis file [/var/lib/urpmi/synthesis.hdlist.CD1.cz]
problem reading synthesis file of
Robert,
Pls. send the version number of your packages like
drakgw
Recenty, after RC2 was released.. these packages fixed
the connection sharing problem..
drakxtools-1.1.9-45mdk.i586.rpm
drakxtools-http-1.1.9-45mdk.i586.rpm
drakxtools-newt-1.1.9-45mdk.i586.rpm
Re: The cooker version of:
Mandrake Linux Cooker-i586 20020919 12:04
The installer defines this as 9.0 RC 3, but it will not install:
Expert, Install, No package selection.
There was an error installing psmisc-21-2mdk which the installer will
not let you proceed beyond.
--
Ron. [Melbourne
Hello,
when using librep's 'rep' to change/modify Sawfish settings, this just hangs
forever using up to 100% of the CPU and never changes anything. After
killing it (killall rep) and reopening it (middle-clicking on the Desktop on
Gnome2 using Sawfish and then choosing Miscellaneous
I know this is minor, but the new flightgear 0.8.0 package in contribs
has a display problem : the panel instruments does not contain
instruments ! It seg faults a lot (system with Radeon 7500 mobility)
too. This has been tested on RC3.
Eric
Could it be problem with your burned image of the install disk ?
Ron Stodden wrote:
Re: The cooker version of:
Mandrake Linux Cooker-i586 20020919 12:04
The installer defines this as 9.0 RC 3, but it will not install:
Expert, Install, No package selection.
There was an error installing
Just wanted to say that mozilla-enigmail works GREAT!
Thanks so much to whoever put that together!
P.S. Anyone ever had weird problems with Evolution before? Suddenly I
don't get a window any more for a message body, i.e. when I hit compose,
I only get text boxes for address and subject,
Hi
my USB mouse still doesnt work without me manually running
/etc/init.d/usb start
the script is not being run at boot time, and in control centre there is
no entry for it so that I can make it run automatically
initscripts-6.91-10mdk
cheers
cris
Austin Acton wrote:
Just wanted to say that mozilla-enigmail works GREAT!
Thanks so much to whoever put that together!
P.S. Anyone ever had weird problems with Evolution before? Suddenly I
don't get a window any more for a message body, i.e. when I hit compose,
I only get text boxes for
cooker,
i have a 400MHz dell optiplex using the standard MB
video and have had 8.2 running fine for several
months. last night i installed 9.0-rc2 into another
partition and could not get the video card to test out
correctly either in the install or thru XFdrake - (i
have enclosed my /proc/pci
files are now attached
--- sean [EMAIL PROTECTED] wrote:
Date: Thu, 19 Sep 2002 08:21:51 -0700 (PDT)
From: sean [EMAIL PROTECTED]
Subject: 9.0 rc2 xf86config not right
To: [EMAIL PROTECTED]
cooker,
i have a 400MHz dell optiplex using the standard MB
video and have had 8.2 running fine
I wish I could but I don't know enough to send a patch. I
looked through the source and found a directory /var/state
and just guessed correctly. The source, I found, was very
sparsely commented. :-(
Wish I could help,
Bill Shirley
-Original Message-
From: [EMAIL PROTECTED]
I'm running the following:
drakxtools-1.1.9-50mdk
drakxtools-newt-1.1.9-50mdk
harddrake-1.1.9-50mdk
harddrake-ui-1.1.9-50mdk
Maybe they got broken again?
Thx,
R.Fox
Robert,
Pls. send the version number of your packages like
drakgw
Recenty, after RC2 was released.. these packages
I created /usr/lib/sasl/smtpd.conf when I set up Postfix + SASL
on my LM 8.2 system accourding to how-to's. I think it should
be in the postfix installation as well as /etc/pam.d/smtp. It
will not hurt anyone who is not using SASL auth.
[root@elmo postfix]# ls -l /usr/lib/sasl/smtpd.conf
These are not really bugs...more left out than bugs really.
1. I had posted back in Beta4 days about a supported network card not
showing in list of available cards and it is still missing. Details are
as follows:
Card: Asound ALM02 (Myson 803 chipset)
Supported: YES (Since Mandrake 8.0)
Boot of upgrade to RC3 (with devfs=nomount) gave this error
on the screen:
/etc/init.d/usb: line 1: expr: command not found
Then a manual mount gave this error:
mount /dev/sdb1 is not a valid block device.
A restart of the usb script gave this output:
Initialize USB controller (usb-uhci)
Mount
I have tested the 2.4.19-13mdk kernel with our Asus P4B533 mb.
The problem with the IDE controller is still present:
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
ICH4: IDE controller on PCI bus 00 dev f9
PCI:
I have the same in my log.
ls: /usr/X11R6/lib/X11/fonts/drakfont: No such file or directory
-- Bjarne
On Thu, 2002-09-19 at 14:35, Damon Lynch wrote:
Hi,
Maybe it was intentional, but the sizes of the fonts in gnome 2
applications are now quite big, massive even. Courier 12 pt in gedit
Robert,
If this is really broken again, then this is extremely
bad.
Can you pls. follow the earlier instruction of
Florin..
1. configure your internet connection with drakconnect
2. configure your internet access with drakconnect
3. configure your security AND internet sharing
4. try if it
Warly [EMAIL PROTECTED] writes:
[root@amda7v Cooker]# ll
total 2614720
-rw-r--r--1 root root 732594176 Sep 19 13:29 1-Cooker.iso
-rw-r--r--1 root root 773685248 Sep 19 13:32 2-Cooker.iso
-rw-r--r--1 root root 129499136 Sep 19 13:32 3-Cooker.iso
On Thu, Sep 19, 2002 at 02:31:42PM +0200, Guillaume Cottenceau wrote:
This doesn't interest us as it's only a workaround for the
problem - it doesn't help us understand the causes of the
problem.
gc don't be obtuse. He seemed to be asking for a workaroudn too...
--
Ben Reser [EMAIL
no error code. as far as X is concerned, it is up and
running and i can hear the sounds from the
windowmanager starting up but either the screen is
blank or it detects an improper setting and sets
itself to a lower-power state (screen off, power
button turns from green to orange and stays there
Austin Acton wrote:
Just wanted to say that mozilla-enigmail works GREAT!
Thanks so much to whoever put that together!
Does it actually work for you? I can encrypt or sign no problem, but if
I try and let it decrypt or verify, Mozilla crashes. Been trying to
debug, but it happens with the
As of last night's cooker, enigmail works perfectly for me.
Tested encrypt, sign, and verify, but I haven't tested decrypt yet.
Austin
Buchan Milne wrote:
Austin Acton wrote:
Just wanted to say that mozilla-enigmail works GREAT!
Thanks so much to whoever put that together!
Does it
Hallo!
I'm trying to install Mandrake 9rc2 (same error with 8.2) into a friend's
Compaq Presario 905, and Iget the following errors on boot (then it hangs
up):
...
ALI15X3: IDE controller on PCI bus 00 dev 80
PCI: no IRQ known for interrupt pin A of device 00:10.0. Please try using
Ron Stodden [EMAIL PROTECTED] writes:
Re: The cooker version of:
Mandrake Linux Cooker-i586 20020919 12:04
The installer defines this as 9.0 RC 3, but it will not install:
Expert, Install, No package selection.
There was an error installing psmisc-21-2mdk which the installer
sean [EMAIL PROTECTED] writes:
i have a 400MHz dell optiplex using the standard MB
video and have had 8.2 running fine for several
months. last night i installed 9.0-rc2 into another
partition and could not get the video card to test out
correctly either in the install or thru XFdrake - (i
On Thu, Sep 19, 2002 at 11:11:48AM +0200, Warly wrote:
I remind you that the contains of the CD is available at:
https://qa.mandrakesoft.com/cooker.cd
and also with rpmmon:
[warly@ke plf]$ rpmmon -V -p xemacs
Getting information about packages from:
On Thursday 19 September 2002 07:47 am, Frederic Crozat wrote:
On Thu, 19 Sep 2002 07:21:32 +, Texstar wrote:
I'm getting the dreaded :
Cannot initialize the Ximian Evolution shell: Configuration Database not
found
Try oaf-slay and start evolution again..
That was the first thing
s wrote:
On Wednesday 18 September 2002 01:55 pm, John Allen wrote:
Having tried both the NVIDIA 1.0 2960, and 3123 builds with MDK 9.0
RC3, OpenGL apps crash quite easily. The 2960 build is working fine
on the same machine with the stock 8.2 kernel.
So either their is a problem with the
On Fri, Sep 20, 2002 at 12:18:29AM +1000, Ron Stodden wrote:
Re: The cooker version of:
Mandrake Linux Cooker-i586 20020919 12:04
The installer defines this as 9.0 RC 3, but it will not install:
Expert, Install, No package selection.
There was an error installing psmisc-21-2mdk which
On Thu, Sep 19, 2002 at 08:34:07AM -0500, SillyZ wrote:
urpmi.addmedia CD1 file://rpms
added medium CD1
reading rpm files from [/rpms]
unable to read rpm files from [/rpms]: bad rpm
/rpms/imwheel-0.9.9-3mdk.i586.rpm
no hdlist file found for medium CD1
examining synthesis file
Maybe someone wants to take this guy off the list? His mails keep
bouncing back to me.
--Transcript of session follows ---
[EMAIL PROTECTED]
The system cannot find the path specified.
--
Sincerely,
David Walluck
[EMAIL PROTECTED]
msg75750/pgp0.pgp
Description: PGP signature
in 2.4.4-62mdk some Xresources that were screwing up
Tk were taken out, recently some have been added that
are screwing up Tk again, differently this time
though. I've looked at the Xresources files, but it's
not obvious this time what's causing it.
Maybe Flepied will know offhand, ::shrug::
On Thu, Sep 19, 2002 at 01:56:42PM -0400, David Walluck wrote:
Maybe someone wants to take this guy off the list? His mails keep
bouncing back to me.
--Transcript of session follows ---
[EMAIL PROTECTED]
The system cannot find the path specified.
I asked for that 3 days ago:
I think rc3 has only the devel rpms for OpenDX 4.1.3
on the 3rd cd but the main rpm seems to be missing.
Would it be possible to include the latest 4.2.0 in
the final release.
Binoj
__
Do you Yahoo!?
New DSL Internet Access from SBC Yahoo!
Is this correct?
[root@localhost rfox]# rpm -qa | grep kernel
kernel-2.4.19.13mdk-1-1mdk
kernel-headers-2.4.18-41mdk
kernel-source-2.4.19-13mdk
Thx,
R.Fox
Ben Reser wrote:
On Thu, Sep 19, 2002 at 01:56:42PM -0400, David Walluck wrote:
Maybe someone wants to take this guy off the list? His mails keep
bouncing back to me.
--Transcript of session follows ---
[EMAIL PROTECTED]
The system cannot find the path specified.
I asked for
On Thursday 19 September 2002 6:13 pm, John Allen wrote:
[snip]
If you haven't seen it yet try the kfiresaver3D from apps.kde.com, its
magnificient.
Thanks - I'm one of the authors :-)
Is there any chance of it being included in the distro (post 9.0, of course)?
I think that eye-candy is
On Thu, Sep 19, 2002 at 02:12:23PM -0400, David Walluck wrote:
Sorry, I somehow missed that. One thing that screws me up is some
messages to the list don't seem to download in order (maybe some people
have their clocks set wrong, I'm not sure what the problem is).
That's okay. Perhaps is
Ben Reser wrote:
On Thu, Sep 19, 2002 at 08:15:23AM +0200, Giuseppe Ghibò wrote:
Well, and if the patch doesn't exists yet? And furthermore I repeat,
in most cases there aren't ANY sysadmin who worries about upgrades.
It exists it just hasn't been kept up to date with the
I have a fully reproducible crash of X11 :
The bug seems to be in the mga driver :
- Take a PC with a matrox g450
- configure the X server in 16 bits, 1280x1024
(I have joined my XF86Config-4 in logfiles.tar.gz)
- open the file LdMBUG2.doc with OpenOffice
-- X crashes
---
I have
1 - 100 of 200 matches
Mail list logo
