In my opinion, this should be in the ScalabePBS package because in the current
packages the description is exactly the same:
The Scalable OpenPBS version incorporates scalability, fault tolerance, and
feature extension patches provided by NCSA, OSC, Sandia, PNNL, U of Buffalo,
and other
On Wed, 2003-11-12 at 08:45, Olivier Blin wrote:
On Wed, 12 Nov 2003 03:49:01 +0100
Olivier Blin [EMAIL PROTECTED] wrote:
gaim now segfaults at startup.
The bug must caused by the TCL patch :
Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread 16384 (LWP
Hi,
Anybody is successful in getting pctel modem working with 9.2. I got
the drivers from http://linmodems.technion.ac.il/pctel-linux/ and
installed the drivers. My dialer (kppp and minicom) recognizes the
modem. Kppp starts dialling but i don't see any response. I can't hear
the sound also.
Hi!
We use OpenPBS in a cluster with Mandrake 9.0. I was going to update to 9.2,
but I have found that:
- OpenPBS depends on old tcl, tk and elf libraries.
- There are ScalablePBS packages that don't have these problems, but:
* What is ScalablePBS? The web page is still the same...
Is this ok?
[EMAIL PROTECTED] SRPMS]$ rpm --rebuild vcdimager-0.7.19-1mdk.src.rpm
Installing vcdimager-0.7.19-1mdk.src.rpm
warning: user goetz does not exist - using root
warning: group goetz does not exist - using root
warning: user goetz does not exist - using root
warning: group goetz does not
I tried 2.4.23pre9 kernel. I applied the patch on 2.4.22-18mdk kernel.
ACPI seems to be working fine with this. Do we have any plan of
backporting acpi fixes in this to 2.4.22mdk kernel?
--jaimon
On Thu, 2003-10-23 at 19:03, Jaco Greeff wrote:
Jaimon Jose wrote:
Can you test
Hi,
I have few of hardware related problems with a dell latitude c640
1. I use a TEAC CD224E DVD drive with this. I can see that drive is
properly recognized while booting. But I don't have a /dev/dvd
created. ( dmesg is attached.)
2. I do have a PCTEL 2304WT v.92 modem. I can't see 9.2
used pmsuspend2 and it copied entire image to disk. When I reboot 75%
of time system get locked. ( If I had been running X). I'm yet to
debug more into this.
--jaimon
On Wed, 2003-10-22 at 20:18, Buchan Milne wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Jaimon Jose wrote:
Thanks. I
users somehow, an errata maybe?
Vince? Can you adjust the nolapic errata to include something along the
lines of Laptops supporting Intel Speedstep crash when removing the
machine from, or placing it on power or similar.
PS: This is using a tmb kernel, although it should work on the
Hi,
I upgraded my Dell latitude C640 laptop to 9.2. I was running 9.1 all
along without any problem ( except suspend with X ). Now, system locks
up if I remove power and I have to switch off and restart. I searched
the bug data base but couldn't find anything similar there. Any idea or
Thanks. I found the details here.
http://www.mandrakelinux.com/en/errata.php3#nolapic
On Wed, 2003-10-22 at 18:45, Buchan Milne wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Jaimon Jose wrote:
Hi,
I upgraded my Dell latitude C640 laptop to 9.2. I was running 9.1 all
along
Looks like there is a problem with this client ( or my python
binaries). Once I break the downaload, I get an error when I restart
btdownloadgui. After existing file checking, it comes out with an error
symbol fcntl not found. Its little confusing since fcntl is a libc
symbol. I was getting a
is the md5sum for this distro ?
--
Jaimon Jose ([EMAIL PROTECTED], yahoo.com, | Ph.:91-98450-18143
vsnl.net }, [EMAIL PROTECTED])| #include std_disclaimer.h
On Tue, 2003-08-19 at 15:37, David Walser wrote:
Brant Fitzsimmons wrote:
Hello all,
Are you taking submissions for bootsplash designs? If so, I'd like to
add mine. If not, I'm sorry for wasting everyone's time.
http://bfcomputerconsulting.com/images/mandrake_splash.jpg
I
Broadcom is publishing some drivers in its website now.
The url is http://www.broadcom.com/docs/driver-download.html
The latest linux drivers in that page are:
BCM570x 6.2.11 (latest mandrake kernel has 6.0.2)
BCM4401 2.0.2 (latest mandrake kernel has 2.0.0)
I attached changelog for both.
El Mar 01 Abr 2003 13:39, Martin Fahrendorf escribió:
clear to understand, but there are some drawbacks. First, sasl1 can no
longer use the password file (sasldb) from privious versions (now sasl1
uses gdbm, previous versions used db3.3) and there is no easy way to solve.
To compile sasl2 you
El Miércoles 30 Octubre 2002 15:51, Guillaume Rousse escribió:
/dev/ttyx not found
/dev/hdx not found
etc...
[rootsilbermann guillaume]# rpm -q MAKEDEV devfsd initscripts
MAKEDEV-3.3.1-10mdk
devfsd-1.3.25-22mdk
initscripts-6.91-13mdk
I've ran etc-update to be sure i had no unapplied
El Dom 13 Oct 2002 20:22, David Walluck escribió:
Beware of using XFS on your root partition. I have done this, and
Mandrake tools do not properly load the XFS module so that you can
access your root partition if you build your own kernel.
I have been using XFS in the root partition
It seems that the problem is that glibc package from Mandrake 9.0 has some
libraries optimized for i686 (with the CMOV instruction) in the directory
/lib/i686 and that the Via C3 cpu (which has not that instruction) is
detected as i686. So, the solution is to delete that directory as soon
El Lun 07 Oct 2002 20:11, rowland escribió:
On Monday 07 October 2002 12:27 pm, you wrote:
er, I think I understand what you are saying, after installation del a
directory, is that right. Well I would if I could but installation fails
First of all, I'm sorry for my English. It's
I have updated an 8.2 system with the latest rc3 ;-)
Installation process was ok, but there is a problem with devfs. Devfs is
loaded without error, but whenever a process try to access to /dev/hdax or
/dev/ttyx is not able to do it. With devfs=nomount the system starts well.
I had the same issue after a rc1 upgrade with the /etc/ppp/peers/adsl
file missing the vpi and vci numbers. So that issue is still present as
of rc1.
On Thu, 2002-08-22 at 11:14, Peter Ruskin wrote:
On Thursday 22 Aug 2002 11:31, Daouda LO wrote:
Peter Ruskin [EMAIL PROTECTED] writes:
On
I noticed on a fresh install that one of my students was trying to open
up a zip package from within Kde, but it wouldn't open up because ark
complained that zip was not installed. Shouldn't ark's depend on zip
and unzip?
I have two cdrom drives, as you can see below. After a rc1 upgrade the
installer removed both of my cdrom drives (which work fine) from
/etc/fstab.
Also devfsd seems to be having a hard time picking up hdc, if I access
hdd then hdc becomes populated in /dev/ide/host0/bus1/target0/lun0 but a
I agree somewhat, however a new user trying Linux out for the first time
probably won't be able to figure it out. I view it as a matter of
polish. I guess it just doesn't matter :(
On Tue, 2002-09-10 at 17:21, Ben Reser wrote:
On Tue, Sep 10, 2002 at 06:55:06PM +0200, Götz Waschk wrote:
El Lun 19 Ago 2002 16:39, Giuseppe Ghibò escribió:
- added mga_vid kernel module packages (Patch8).
(Patch7). - compile radeon_vid kernel module.
The %files section for the new packages is not ok because both modules
(mga_vid and radeon_vid) go in mgavid packages.
- Added a flag
Upgrade to 9.0 b3, when I attempt to start postfix I receive the
following error message.
Starting postfix: postalias: fatal: bad numerical configuration:
debug_peer_level = 2? PATH=/usr/bin:/usr/X11R6/bin? xxgdb
/usr/lib/postfix/ sleep 5
I was running KDE 3.01 downloaded from KDE, (I believe someone at
Mandrake Soft built the rpms) The rpms were in /usr
It complained it could not find qtlib, I had to add /usr/lib/qt3/lib to
ld.so.conf to resolve the issue.
It tried to start 4 times then quit, the system continued to start
services and stopped at a console login prompt.
S20xfs softlink was not present in rc5.d
* Kernel headers, src, and doc got updated but not the actual kernel.
* gettext - libintl did not get updated... this caused every init.d
service that used init.d functions to display wrong library error
message.
* rpmdrake would not start, because perl-gettext from 8.2 didn't get
updated to
for doing that... ;-)
Thanx,
jose.
Reposting On Sun, 2002-08-04 at 21:01, Jose wrote:
See my first message dated Jul 28 for details on first upgrade attempt.
I received the following error message while attempting to upgrade. I
had about 800 meg free.
Your system does not have enough free space left for installation
Everything was going find until Please wait finding packages to
upgrade and then it hung there, further investigation shows no
installer or kernel related error messages. Top showed runinstaller2
using all the cpu cycles and slowly gobbling up all available memory and
swap space. I
On every Mandrake version since I can remember, when using X w/ 3d accel
I all-ways have had to add Option XaaNoPixmapCache in the device
section. If I don't add that there is pixel corruption. I know you
guys gotta know about this right? I've installed on many motherboards
with integrated
Wouldn't you agree though that if 9.0 is going to ship as, and it's a
easy addition to add to XFdrake, then it should be done?
On Sun, 2002-07-28 at 18:34, Mattias Dahlberg wrote:
On 28 Jul 2002, Jose wrote:
On every Mandrake version since I can remember, when using X w/ 3d accel
I all
El Sáb 27 Jul 2002 23:38, Kenton Groombridge escribió:
Hi,
There is a problem with libsasl7-devel-1.5.27-5mdk.
I have rebuilt it from the cyrus-sasl-1.5.27-5mdk.src.rpm, and tried to
fix the problem but couldn't.
The file from the rpm, /usr/lib/libsasl.la, is not recognized as a valid
I installed it on two different systems. both had very similar
hardware. Intel motherboard with / integrated intel chipset for video
and sound. Both pc's acted the same unless otherwise noted.
Installation
There was a ncurses style message, about a alternate boot message, is
this just cause
El Mar 23 Jul 2002 12:27, Guillaume Rousse escribió:
These are things I deleted from configure options:
--disable-mmx \
--disable-mmx2 \
--disable-3dnow \
--disable-3dnowex \
--disable-sse \
--disable-sse2 \
Why do you
I know that the new Mdk Kde3 packages are in /usr. pclinuxonline.com is
reporting that David Faure said that the packaging is going to go back
to /opt. My question is were is it going to be when the new version of
Mdk is released down the road?
talking to the network this
morning, even though in that case I think it is a
hardware problem (I first suspected
iptables/mod_antihack on the dmz server, but the
problem remained when those were removed and the
server rebooted).
Thanks for the great work!
--- Florin [EMAIL PROTECTED] wrote: Jose
Hi!
I have been able to forward smtp, http and https to my
DMZ webmail server. My problem now is how to access it
using proxy arp. I have tried all configs I could find
in www.shorewall.ent, and am always unable to access
the webmail server using the domain name, only using
the internal ip, when
I forgot, when I launch prelude there is always the
error prelude: error opening
'/etc/prelude/prelude.rules'.
--- Jose Bernardo Silva [EMAIL PROTECTED]
wrote: Hi!
I have been able to forward smtp, http and https to
my
DMZ webmail server. My problem now is how to access
it
using proxy arp
the one
allowing/forwarding access to the dmz?
Thanks!
--- Jose Bernardo Silva [EMAIL PROTECTED]
wrote: I forgot, when I launch prelude there is
always the
error prelude: error opening
'/etc/prelude/prelude.rules'.
--- Jose Bernardo Silva [EMAIL PROTECTED]
wrote: Hi!
I have been able
. Is it alsa?
Please find attached log files for more information.
Thanks,
--jaimon
On Mon, Apr 15, 2002 at 03:12:34PM +0200, Thierry Vignaud wrote:
tvignaud Jaimon Jose [EMAIL PROTECTED] writes:
tvignaud
tvignaud Appreciate your help in resolving this.
tvignaud
tvignaud what reports aumix -S; aumix
I use a Acer 3300U scanner and everything was fine with 8.2Beta 3.
Configuration detects the scanner and installs it. With the released 8.2
also, configuration detects the scanner and installs. devfs finds it
whenever I switch on the scanner and puts an icon on desktop.
sane-find-scanner
I installed mandrake 8.2 on a and added a sound
card (es1371) later. Harddrake detected the sound card and installed
everything perfectly. I can see the modules loaded, xmms plays without any
cribbing, but i don't get any sound out. I tested the card and found that
card is fine. I do have
Ever since I upgraded to ver 8.2 on my desktop and laptop, Mozilla
segfaulted. After trying many different things I finally troubleshoot
it to libsafe, I updated libsafe to cooker ver. 2.0.13-1mdk
Jose
I have installed 82B3 on an Dell latitude laptop Everything was fine
untill network configuration I have a pcmcia based xircom ethernet/modem
module (Xircom CardBus) and drakenet couldn't locate this My network
installation failed, but I found that that xircom_cb module is loaded when I
El Mar 26 Feb 2002 10:40, escribiste:
as it turned out my /usr/share/config/kdm/kdmrc was
hosed. Unfortunately even kcontrol did not reset it up
properly. Fortunately I had another server that I
could pull the config files from to get it running
again. My /usr directory is using xfs and I
I've upgraded to Beta2 from Mandrake8.1. Upgrade was smooth untill I
rebooted the machine. I was not able to start my XServer in user mode but
the same was okay as root. I always get an error Authentication failed.
After a little bit of plying around with strace, I realized, pam thorugh
xinit
Hi,
I have an Acer 3300U scanner which is supported by snapscan backend from
sane-1.0.6 onwards. This scanner reports type as FlatbedScanner22, but
this was not there in sane-1.0.6. But this has been added to sane-1.0.7 and
I hope the same will be available with next beta release. However, by
Hi,
While installing beta2, I skipped internet connection details. But network
was set up correctly. Moving forward, I chose to upgrade the available
packages from mirros (I know i shouldn't have done this when I didn't setup
any internet connection details.) I expected a dialogue box for
Hi,
I installed 8.2B2 and my audio stopped working. xmms or mixer doesn't
report any error in accessing audio device and continue to play. But, no
sound comes out. I do have this problem if I use the default kernel that
comes with Mandrake. If I compile and make sound as part of kernel instead
menu.
Can somebody help me in correcting this. THis stops me from updating any
packages from web using MandrakeUpdate.
Currently I'm using
rpmdrake-1.3-103mdk
Thanks in advance,
--jaimon
--
Jaimon Jose (jjaimon@{myrealbox.com, yahoo.com,| Ph.:91-98450-18143
hotmail.com
menu.
Can somebody help me in correcting this. THis stops me from updating any
packages from web using MandrakeUpdate.
Currently I'm using
rpmdrake-1.3-103mdk
Thanks in advance,
--jaimon
--
Jaimon Jose (jjaimon@{myrealbox.com, yahoo.com,| Ph.:91-98450-18143
hotmail.com
I have noticed this problem with 8.1 and aboove. My rpmdrake doesn't work
well if I have a proxy installed and specified. I get the following error
always.
should install 'apache'
extracting apache-1.3.22-1.1mdk.i586
extracting apache-common-1.3.22-1.1mdk.i586
extracting
Hello all,
this is my first post to the list cooker ... and is to inform about
some problems I'm having with MandrakeUpdate.
I'm now using Mandrake Cooker, I upgraded from mandrake 8.1
a couple of days ago. My intention was to use some packages in
Cooker in my laptop
, François ... that's the spirit in such a development and testin'
list ...
best regards,
jose.
of rpmdrake are you using ? The last too ?
rpmdrake-1.4-6mdk ... the latest from ftp.sunet.se ...
thanks a lot!
jose.
Charles A Edwards wrote:
As of this morning if rpmdrake is used to to update pkgs on a system currently
running cooker, rpmdrake is STILL attempting to install the packages rather
than upgrade them, so because of conflics with the already installed pkgs none
can be done.
Today when there
Mike Tracy Holt wrote:
Jose wrote:
Charles A Edwards wrote:
As of this morning if rpmdrake is used to to update pkgs on a system
currently running cooker, rpmdrake is STILL attempting to install
the packages rather
than upgrade them, so because of conflics with the already installed
Lesstiff that comes with Mandrake 8.1 doesn't work well:
- Sometimes variables show incorrect values within DDD.
- Sometimes robot' sensors show incorrect values within Saphira (a tool to
develop robot controllers).
Both applications:
- Use motif (or
I was trying to get supermount working by running the supermount app and
letting it write to the fstab, the problem is that whenever the system
is restarted i get a few extra unwanted lines appended to my fstab with
kudzu as a one of it's options? each appended line is one of the drive's
i got
This was a fresh install of beta3 upgraded to rc1.
What happened to the default eazel theme? Gnome defaulted to the ugly
original theme that does not match Kde's. Why do I think this is
important, because it removes polish from the distribution that I believe
is important for acceptance
/etc/sysconfig/autologin for reading: no such file or directory at
/usr/lib/libDrakx/bootlook.pm line 274.
The cheese theme for gnome is blurry.
Also the peoples faces brings back memories of the good old cga days, this
is also true for the faces used in kdm.
On a fresh install when going to the mandrake control center and
selecting hardware when you hover the mouse over Run Configuration
Tool the word associated is spelled associed
Jose
it using the same procedure as I did
above and
it shows up fine in the database, I also tried other none cooker rpms
and it
worked fine. I have had the same problem with many other cooker rpms.
Jose
rpm -qa | grep rpm
rpmlint-0.34-1mdk
rpm-4.0.3-0.19mdk
rpm-devel-4.0.3-0.19mdk
rpm-build-4.0.3
El Jue 26 Jul 2001 14:12, escribiste:
i am wondering if a decent divx player will be
Try mplayer (http://mp.dev.hu/homepage) or xine
(http://xine.sourceforge.net). I think they are the best and they play
everything. I use xine for DVD movies and mplayer for avi files, but both
distro. Is that wishful thinking?
I run mdk8, say i could recompile my kernel or compile a module for my
kernel, then what happens when it's time to upgrade? Will mdk be able to
recognize my ide chipset to start the installation?
Jose
Hi all,
I recently switched to LM8.0 from RH6.2 I'm having this strange problem
with fetchmail since then. My fetchmail doesn't get any mails from any of
my pop or imap servers in daemon mode. After tracing I found that both the
servers are giving an invalid request. But if I run in
.
If I remove the additions I made in regard to postinstall then it works
ok.
'netc' = {
...
'GATEWAY' = 'xxx.xxx.xxx.xxx'
}
};
^@
Does anyone have any suggestions?
Jose
Hello.
I am willing to rebuild the gcc3.0 from contrib in a
Red Hat Linux 7.1 system. I found that these packages
requires /usr/sbin/update-alternatives. The case is
that currently I am not running a Mandrake distribution.
Could anybody please tell me what package provides it?
Thanks,
Romildo
Needless to say DRI is disabled when I look in X log file and I see the
above message. I'm running XFree86-4.1.0-4mdk and kernel 2.4.5-5mdk.
Both set of packages have no unsatisfied dependencies. Am I missing
something on my end? Voodoo3 3000 vid card.
Ed Colmar wrote:
Hi!
Thanks for the reply!
I'm running mandrake security beta4 (should upgrade it now) on a AMD
k6-2 with 64 mb ram
My isp has given me the ip range x.x.x.34 - x.x.x.60 with the netmask
of 255.255.255.224
My mandrake security box is on x.x.x.48
My Web server is on
Dima Chirgadze wrote:
Dear All,
I've started getting these messages in my /var/log/syslog on
MandrakeSecurity firewall. Is it normal? I've checked /etc/cron.* and
couldn't find anything. Can I turn these messages off?
Thanks
Dima
Jun 3 04:10:01 daffy CROND[28560]: (root) CMD (
and was it renamed or
something?
Thank you very much for the great product!!
Michael
I don't work for Mandrake but I think you hit the nail on the hammer.
It's a newer version of RC1 and they renamed it. Personally I really
don't see much difference between RC1 and SNF.
Jose
Is there anything special regarding auto install in mdk security v1.0?
Has this feature been disabled?
i create bootdisk cdrom.img using dd
cd /mnt/floppy
touch ks.cfg
cp ~/auto_inst.cfg.pl .
edit syslinux.cfg add ks kickstart=floppy
Jose
as kdeinit is killed
and you restart kde neither option is applied and in the control panel
both options are checked.
My solution was to edit /usr/bin/startkde and change the line
LD_BIND_NOW=true kdeinit +kcminit to kdeinit +kcminit
Jose
Just like Gnome, for the next release of Mandrake, containing styles and
theme. Good idea?
any type of
response, seems unprofessional.
Jose wrote:
When doing port forwarding using cookfire rc1, your only given a choice
for port number and internal ip range, it doesn't have a means of
specifying source address to which to allow port forwarding and defaults
to 0.0.0.0. A second
When doing port forwarding using cookfire rc1, your only given a choice
for port number and internal ip range, it doesn't have a means of
specifying source address to which to allow port forwarding and defaults
to 0.0.0.0. A second posible issue could be we need to be able to https
from a remote
I ran nessus against a mdk8 box i built to run as a firewall and I got
the following message..
The remote host uses non-random IP IDs, that is, it is
possible to predict the next value of the ip_id field of
the ip packets sent by this host.
An attacker may use this feature to determine if the
I turn on aa fonts in the kde control panel, it's works until i kill X,
any ideas? is there another script or switch i need to tweck? Thanks
Pixel wrote:
Sarang Lakare [EMAIL PROTECTED] writes:
[...]
- No flash plugin (and kdebase-nsplugins) installed by default on a distro
targetting newbies and the desktop.. is it that difficult to understand that
this package is a must for LM?
i don't like proprietary stuff ;p
-
I've been reading all of these posting of patching vmnet to get vmware
to work w/ 2.4.x? Can someone provide me with the url?
Alexander Skwar wrote:
Hello.
I've got some quite strange problems with powershell 0.8 from Mandrake
contrib. When I start it from the GNOME menu, it immediately segfaults.
Starting it from a custom starter from the panel, or starting it from a
xterm, works fine - no problems whatsoever.
Very nice overall, I upgraded from ver 8b3, used iso images
- After the install xinetd would not start. I had to reinstall xinetd
package, /usr/sbin/xinetd file was missing when querying package, ok
after that.
- I selected expert mode, all package categories. After install using
drakboot
Pixel wrote:
Jose [EMAIL PROTECTED] writes:
During the installation of Mandrake 8 Beta 3 I when asked to insert the
extensions cd I was unable because the drive was in use. I've never had
any problems in the past with this.
could you give the list of packages chosen? it is in /tmp
During the installation of Mandrake 8 Beta 3 I when asked to insert the
extensions cd I was unable because the drive was in use. I've never had
any problems in the past with this.
tty3
* calling umount (/tmp/image)
* warning: error unmounting /tmp/image: Device or resource busy at
Franois Pons wrote:
Jose [EMAIL PROTECTED] writes:
[root@cool /root]# urpmi.addmedia cook
ftp://ftp.ciril.fr/pub/linux/mandrake-devel/cooker/Mandrake/
RPMS with ../base/hdlist.cz
unable to inspect list file for "cook", medium ignored
cp: /var/lib/urpmi/hdlist.cook.cz: No
El Mié 21 Mar 2001 12:33, escribiste:
it should be written:
"To activate the mouse,"
"MOVE YOUR WHEEL!"
You are right, that is written, but I have checked that, as samebody said
before, after moving the wheel, the motion is still erratic for a few (two or
three) seconds.
whereis the mandrake bugzilla page?
Here's my issue, now matter what I do, urpmi hangs... I'm not sure why?
Scroll to the bottem and you will see where it hangs up. I'm using b1
with new cooker (3/23) rpms of urpmi, wget and rpmdrake.
[root@cool /root]# urpmi.addmedia cook
El Mar 20 Mar 2001 22:49, escribiste:
in case it happens again, be sure to note which process it is!
i thought this was fixed in beta2 :-(
Ok.
- I had a Microsoft IMPS/2. If I select "generic ps/2 mouse with wheel"
in installation the mouse behavior is erratic. I have to
El Jue 09 Mar 2000 23:09, escribiste:
(2)after upgrade to beta2, did you tried mount any cd(regular iso9660,
ie. 7.2 cd1 or music cd, dvd) mine is not be accessable.
It works fine in my computer (I have supermount enable). Here is my
/etc/fstab:
/dev/hda6 / ext2 defaults 1 1
Hello! I was going to send you a report with my experiences with beta1 when
beta2 came out, so I send you a "all in one" report :-) Beta1 was an upgrade
of a 7.2 system and beta2 was an upgrade of the beta1.
* Problems present in beta1 and fixed (I think) in beta2:
- X
if a user have the same permission as root to do any thing root does! so
login as root! It seems strange ...
otherwise, if u really want it, try: userdrake
jose
On Monday 19 March 2001 17:27, you wrote:
Hello All,
could someone please tell me how to change the permissions of one of my
one box I installed the version of the 7.2 cdrom, on the other I downloaded the
cooker ver. Didn't seem to make a difference though.
Jose
When you use Nautilus to draw your desktop and set Gnome not to set the
background (for Enlightenment), Nautilus ignores this and sets the
background to the last selected image. Does anyone confirm if this is a
bug in Nautilus, Mandrake packaging, or unique to my system?
I didn't, but I would like to know about nvidia a little more, because I need
glx and maybe it works only with nvidia!? Do you have any information about
it?
Jose
On Wednesday 14 March 2001 13:22, you wrote:
Has anyone tried the new nvidia drivers with the cooker yet?
NVIDIA_GLX-0.9-767
1 - 100 of 120 matches
Mail list logo
