RE: Failed while insert dsplinkk on EVM 1.30 release

all right. I am trying to compile the dsplink. Thanks. On Tue, 2008-06-10 at 11:17 +0530, Kamoolkar, Mugdha wrote: Chris can probably correct me if I'm wrong, but I suspect that's because dynamic memory configuration got added in DSPLink, which allowed Codec Engine to release DSPLink binaries

about csl_chiphal.h

I'am using ccs3.2 to debug my program on dm446 DVEVM. When I set pre-define symble CHIP_DM6446 in the compiler of ccs3.2, I got an error : error NO CHIP DEFINED (use -dCHIP_ where is chip number, i.e. 6201) How to set the CHIP for my DM6446 DVEVM? Thank you very much

RE: how to compile own source code for DM355

Hi, There are several ways of producing the root filesystem that I can think of ( some that I actually tried) 1/ Use LTIB (since you mentioned it) - it works fine - you need to force it to use 'external' kernel source and point it to the compiler from the DM355 MV installation. There

RE: Failed while insert dsplinkk on EVM 1.30 release

When I try to compile the dsplink, it will give several compile error. [1] prcs.c: In function `PRCS_Create': prcs.c:183: error: dereferencing pointer to incomplete type prcs.c:184: error: dereferencing pointer to incomplete type prcs.c:186: error: dereferencing pointer to incomplete type It seems

RE: DVEVM 6446 NFS Mount issue

Hi, You can set the 'wrap' on minicom to it will correctly show the line. (cntrl-A w) will toggle it on/off. OK this time the target is trying to mount NFS but the server is not responding. You posted your 'exports' file previously (which looked OK to me) - did you start the nfs service?

RE: 6446: how to not use dhcp

Hi, You need to specify the full ip= parameter...the last one 'autoconf' turns off DHCP ip=client-ip:server-ip:gw-ip:netmask:hostname:device:autoconf Example: ip=172.18.1.222:172.18.1.49:172.18.0.254:255.255.0.0:::off Here the 'hostname' 'device' fields are not being set - hence the ':::'.

RE: Failed while insert dsplinkk on EVM 1.30 release

Thanks Mugdha. http://tiexpressdsp.com still can not be accessed.The connection has timed out.Damn! After doing some modification, DSPLINK can be successfully compiled.But on linking time, a strange error arise: Post processing kernel module dsplinkk...

RE: Failed while insert dsplinkk on EVM 1.30 release

Thanks. Mugdha. I will try to remove the sys_open etc from DSPLINK_140-05PL by comparing DSPLINK_1_50. Regards, Steven On Tue, 2008-06-10 at 14:06 +0530, Kamoolkar, Mugdha wrote: DM420 is the same as DM6446 :-) Kevin's patch should take care of the sys failures also. Can you check that out?

Video Decode algoritm creation issue in TMS320DM6467

Hi, I am working on TMS320DM6467 board. I gone through the decode demo provided by TI. For video decode algorithm creation they are using Vdec2_create() API. But the same doesnt work in my application, the creation of algorithm is failing. I tried using VIDDEC2_create(),VIDDEC_create() with

RE: Failed while insert dsplinkk on EVM 1.30 release

Great. BTW, funny coincidence, the wiki seems to be down right now. I'm also not able to open the site. But you can try it later sometime. It has a good amount of useful information. Regards, Mugdha -Original Message- From: steven.zhang [mailto:[EMAIL PROTECTED] Sent: Tuesday, June 10,

Re: 6446: how to not use dhcp

Am Tue, 10 Jun 2008 09:21:53 +0100 schrieb Phil Quiney: You need to specify the full ip= parameter...the last one 'autoconf' turns off DHCP ip=client-ip:server-ip:gw-ip:netmask:hostname:device:autoconf Example: ip=172.18.1.222:172.18.1.49:172.18.0.254:255.255.0.0:::off Here the

RE: Failed while insert dsplinkk on EVM 1.30 release

Yeah. Thanks to your patch. I have successfully created the dsplinkk.ko and it works fine! Thanks. Regards, Steven On Tue, 2008-06-10 at 14:41 +0530, Kamoolkar, Mugdha wrote: Great. BTW, funny coincidence, the wiki seems to be down right now. I'm also not able to open the site. But you can

RE: Regards DM355 EVM Board

Hi, The information you seek is in the Getting Started Guide that ships with the DM355 - see section A.3 Alternate Boot Methods Just a minor point - the network root filesystem is served via NFS and has nothing to do with TFTP. TFTP (if used at all) will load the kernel from a suitable TFTP

Re: [PATCH] ARM: DaVinci: Add clk_disable_unused in clock framework

Hi Kevin, On Thu, May 15, 2008 at 1:36 PM, [EMAIL PROTECTED] wrote: From: Trilok Soni [EMAIL PROTECTED] - Disable un-used clocks, this will save bit of power. It has got Kconfig option, so if all of your drivers are not yet using clock framework then you can disable this feature until they

Re: [PATCH 01/13] ARM: DaVinci: checkpatch.pl fixes for board-evm.c

Hi Kevin, On Fri, May 9, 2008 at 5:12 PM, [EMAIL PROTECTED] wrote: From: Trilok Soni [EMAIL PROTECTED] Signed-off-by: Trilok Soni [EMAIL PROTECTED] If these thirteen checkpatch patches looks good, then please push it to GIT. -- ---Trilok Soni http://triloksoni.wordpress.com

RE: DVEVM 6446 NFS Mount issue

Dear Mr Phil. Very thanks for your reply. I have got it works. I disable the firewall then it works fine. Later I make documents and stpes that I follow, so that some new comers like me can follow very clearly. Thanks you so much. Ramesh. From: Phil Quiney [mailto:[EMAIL PROTECTED] Sent:

RE: DVEVM 6446 NFS Mount issue

Hi , Glad you got it going. We put this sort of information on a Wiki (http://twiki.org) to share the information internally. Regards Phil Q Phil Quiney, Senior Software Engineer Trinity Convergence Cambridge Business Park Cowley Road Cambridge CB4 0WZ, UK T: +44(0)1223-435536 F:

Need of a demo VideoAnlytic Application

Hi all I want to implement Video analytics in my application. But I did not get any demo application with the DVEVM 6446 Board. I don't have any guidance how to use these APIs. Can anyone please help me to get a sample VIDEO-ANALYTIC demo Application? Thanks Deepanshu

RE: vpfe support in davinci open source Git kernel

Arun. TI is working to add support in GIT. So please stay tuned. Murali From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Arun George Sent: Tuesday, June 10, 2008 12:28 AM To: davinci-linux-open-source@linux.davincidsp.com Subject: vpfe

DM360 or DM355 in GIT KERNEL

Hello, Does anyone know whether DM360 or DM355 will every be in GIT? Or will I have to port linux each time I need a update kernel? Thanks, Gerald ___ Davinci-linux-open-source mailing list Davinci-linux-open-source@linux.davincidsp.com

Re: vpfe support in davinci open source Git kernel

Karicheri, Muralidharan wrote: Arun. TI is working to add support in GIT. So please stay tuned. Can you provide any unofficial or planned release date or a road map on this issue? Caglar ___ Davinci-linux-open-source mailing list

RE: flash filesystem boot on EVM

Dear all, I have a problem here. If you put JFFS2 root file system on the NOR flash partitions, you have to disable the Davinci IDE interface support option. The real problem is, how can you get /dev/hda1 for CF card interface? Cheers, Lijun

[Patch 1/2] ARM:DaVinci: Added platform information for EMAC driver in devices.c

This patch does the following: - Added platform information for EMAC driver in devices.c I did verify my outlook settings and they seem to be fine. Attaching this as a patch file in case there are still issues with plain text with my outlook. Please let me know. Signed-off-by: Anant Gole [EMAIL

Re: [Patch 2/2] Net:DaVinci: EMAC driver recoded - cleaned up unused code, coded as per linux conventions

Gole, Anant [EMAIL PROTECTED] writes: This patch does the following: - cleanup of EMAC driver code - followed linux coding guidelines - removed unused code - removed register access, using davinci register access macros This is a large patch but I preferred to cleanup the whole driver

Re: [PATCH] ARM: DaVinci: Add clk_disable_unused in clock framework

[EMAIL PROTECTED] writes: From: Trilok Soni [EMAIL PROTECTED] - Disable un-used clocks, this will save bit of power. It has got Kconfig option, so if all of your drivers are not yet using clock framework then you can disable this feature until they are ready with clk framework.

Re: [PATCH 1/3] ARM: DaVinci: Add support for DaVinci specific tag passing from bootloader.

[EMAIL PROTECTED] writes: From: Trilok Soni [EMAIL PROTECTED] - Addes common.c which implements bootloader tag passing support, as well board config structure passing support from board specific file. e.g for DAVINCI_TAG_UART, to specify enabled uarts pattern, and

RE: Unclean CODEC engine shutdown.

Which version of CE and DSPLINK are you using? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Ashuaria Lee Sent: 10 June 2008 12:34 To: Davinci-linux-open-source@linux.davincidsp.com Subject: Unclean CODEC engine shutdown. Hi, I wonder how you're

DaVinci git updated to 2.6.26-rc5

FYI... git tree has updated to 2.6.26-rc5 + sync w/OMAP git. Kevin ___ Davinci-linux-open-source mailing list Davinci-linux-open-source@linux.davincidsp.com http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source

Re: Unclean CODEC engine shutdown.

Hi Monk, I'm using CE 2.00 and DSPLINk 1.40 p5. And I've used earlier version also. Which was CE 1.10 + DSPLINK 1.30(DVSDK 1.10) Does the CE version and DSPLINK matter? Regards, Ashuaria Lee 2008/6/11, Monk, Roger [EMAIL PROTECTED]: Which version of CE and DSPLINK are you using?

Re: DaVinci git updated to 2.6.26-rc5

Hi Kevin Does it mean that, GIT kernel will run on both Davinci and OMAP as well? 2008/6/11, Kevin Hilman [EMAIL PROTECTED]: FYI... git tree has updated to 2.6.26-rc5 + sync w/OMAP git. Kevin ___ Davinci-linux-open-source mailing list

RE: Unclean CODEC engine shutdown.

Unfortunately, I believe only a DSP reset will solve this issue. Regards, - Rob -Original Message- From: [EMAIL PROTECTED] p.com [mailto:[EMAIL PROTECTED] avincidsp.com] On Behalf Of Ashuaria Lee Sent: Tuesday, June 10, 2008 6:14 PM To: Monk, Roger Cc:

RE: Video Decode algoritm creation issue in TMS320DM6467

Can you set the environment variable CE_DEBUG=2 and re-run your app? This may drop some interesting trace describing 'how far' your app got, and perhaps a clue as to what's failing. FWIW, I added a brief description of CE_DEBUG here, too:

The dm355 jpeg codec issues

Hi! Is there somebody using the DM355 JPEG/MPEG4 codec? I can find this discription on the dm355 datasheet:the DM355 combines high performance MPEG4 HD (720p) codecs and JPEG codecs up to 50M pixels per second, high quality, and low power consumption at a very low price point. Now I want to konw