Re: Re: NSLU2 Debian Installer Erroneous asking for an IP address

2008-06-28 Thread Martin Michlmayr
Sorry it took so long, but I've finally made that change. It will go into the next release of Debian (lenny). oldsys-preseed (2.0) unstable; urgency=low . * Use a static IP address when the configuration says so, even when this is the default value used by the original firmware. In

Re: Re: NSLU2 Debian Installer Erroneous asking for an IP address

2008-01-09 Thread Dirk Vanden Boer
A simple workaround for people having problem with this. Wait to plug-in the network cable until the slug finished booting. It will fail to get a dhcp address and will fallback to static ip. Greets On Jan 8, 2008 7:49 PM, Mike (mwester) [EMAIL PROTECTED] wrote: So, basically even though the

Re: Re: NSLU2 Debian Installer Erroneous asking for an IP address

2008-01-08 Thread Mike (mwester)
So, basically even though the user has specified a static IP, the unit DHCP's anyway. Considering that a well-behaved DHCP server will probe the active addresses, it's *guaranteed* that not even by accident will the NSLU2 get the static IP that the user set. Hence the device is lost on the

NSLU2 Debian Installer Erroneous asking for an IP address

2008-01-07 Thread Sam Reed
Whenever the NSLU2 is set to a static IP of 192.168.1.77, and then flashed it with the debian installer image, it is requesting an IP addresses from DHCP erroneously. Ie it is not following the static ip address (which is the Linksys default). Set to 192.168.1.78, and it uses the static IP address

Re: NSLU2 Debian Installer Erroneous asking for an IP address

2008-01-07 Thread Rod Whitby
Sam Reed wrote: Whenever the NSLU2 is set to a static IP of 192.168.1.77, and then flashed it with the debian installer image, it is requesting an IP addresses from DHCP erroneously. Ie it is not following the static ip address (which is the Linksys default). Set to 192.168.1.78, and it uses

RE: NSLU2 Debian Installer Erroneous asking for an IP address

2008-01-07 Thread Sam Reed
' Subject: Re: NSLU2 Debian Installer Erroneous asking for an IP address Sam Reed wrote: Whenever the NSLU2 is set to a static IP of 192.168.1.77, and then flashed it with the debian installer image, it is requesting an IP addresses from DHCP erroneously. Ie it is not following the static ip

Re: NSLU2 Debian Installer Erroneous asking for an IP address

2008-01-07 Thread Martin Michlmayr
* Rod Whitby [EMAIL PROTECTED] [2008-01-08 10:03]: Whenever the NSLU2 is set to a static IP of 192.168.1.77, and then flashed it with the debian installer image, it is requesting an IP addresses from DHCP erroneously. Ie it is not following the static ip address (which is the Linksys

Re: NSLU2 Debian Installer Erroneous asking for an IP address

2008-01-07 Thread Martin Michlmayr
* Sam Reed [EMAIL PROTECTED] [2008-01-07 23:57]: I did wonder that, but can't remember if I suggested it in the IRC channel Not sure if it's actually noted anywhere then... I was going to say it's documented in my install guide, but I just read it again and it's not clear. I'll clarify it