In-Reply-To: [EMAIL PROTECTED]
On Sat, Feb 02, 2008 at 02:53:19AM -0700, Gordon Farquharson wrote:
On Jan 27, 2008 12:07 PM, Gordon Farquharson
[EMAIL PROTECTED] wrote:
The first paragraph contained the good news. The bad news is that
although Krzysztof's driver is works well, udev does not
Hi Philip
On Feb 7, 2008 1:45 AM, Philip Armstrong [EMAIL PROTECTED] wrote:
This problem is now fixed. 2.6.24-4 contains a change to the Ethernet
driver which allows it to be loaded by udev.
Do you mean 2.6.24-3 ?
Yup, 2.6.24-3 is correct. When I made the change, there was some
confusion in
Hi Gordon!
Gordon Farquharson schrieb:
Let me know if you find discover any problems with the driver. I have
tested it a bit, but certainly not for all situations.
The GPL ethernet driver in debian's 2.6.24-2 is working very well for
me. iperf shows 31.1 Mbits/sec. No errors for me until now.
Hi,
Gordon Farquharson schrieb:
The first paragraph contained the good news.
Thanks a lot for warning us.
This problem is now fixed. 2.6.24-4 contains a change to the Ethernet
driver which allows it to be loaded by udev.
For me 2.6.24-2 from today's sid runs fine with the line ixp4xx-eth in
Hi Kevin
On Feb 3, 2008 4:14 PM, Kevin Price [EMAIL PROTECTED] wrote:
For me 2.6.24-2 from today's sid runs fine with the line ixp4xx-eth in
/etc/modules and an according rule in
/etc/udev/rules.d/z25_persistent-net.rules .
Adding the module to /etc/modules will work, and I even considered
On Jan 27, 2008 12:07 PM, Gordon Farquharson
[EMAIL PROTECTED] wrote:
The first paragraph contained the good news. The bad news is that
although Krzysztof's driver is works well, udev does not load the
driver automatically. This means that you should *not* run a 2.6.24
This problem is now
Hi All
For the arm/ixp4xx Debian 2.6.24 kernel (used on the Linksys NSLU2), I
switched to Krzysztof Hasala's Ethernet driver. I did this because
2.6.25 will definitely contain the Krzysztof's support for the IXP4xx
network processor engine and hardware queue manager, and should
contain the NSLU2
* Gordon Farquharson [EMAIL PROTECTED] [2008-01-27 12:07]:
The first paragraph contained the good news. The bad news is that
although Krzysztof's driver is works well, udev does not load the
driver automatically. This means that you should *not* run a 2.6.24
kernel on your NSLU2 unless you
Gordon Farquharson wrote:
For the arm/ixp4xx Debian 2.6.24 kernel (used on the Linksys NSLU2), I
switched to Krzysztof Hasala's Ethernet driver.
The first paragraph contained the good news. The bad news is that
although Krzysztof's driver is works well, udev does not load the
driver
9 matches
Mail list logo
