Quoting Colin Watson ([EMAIL PROTECTED]):
On Sun, Jun 20, 2004 at 10:03:36PM +0200, Bastian Blank wrote:
- Templates for network-console.
Done.
I made a few rewrites for style consistency with the rest of d-i (very
few needed). You (Bastian or Colin) took care of using the same
formulation
Quoting Martin Michlmayr ([EMAIL PROTECTED]):
When was this known to be working on the Sid d-i images? I tried
installed Debian on a Vaio with a firewire CD/DVD drive, and the Sid d-i
It's a new feature (end of May).
Probably later because ddetect, which includes the needed changes, has
Quoting Brian May ([EMAIL PROTECTED]):
I submitted a bug report #252211 concerning SATA support (as well as
screen corruption when changing consoles), and I also see bug report
#254071 which looks similar. So far I haven't got any response.
D-i team is a bit crowded with install reports and
CTRL-A, or CTRL-Q? (CTRL-Q being the opposite of CTRL-S, and what I
guessed at DebConf when this happened to us)
I don't remember..:-)
When we finally found the magic key, we were using a french
installation with a US keyboard, or the oppositeand all of us
remember that A and Q are
On Sun, Jun 20, 2004 at 07:33:45PM +0200, Matthias Murra wrote:
On Freitag, 18. Juni 2004 18:12, Patrick Caulfield wrote:
On Fri, Jun 18, 2004 at 05:54:38PM +0200, Matthias Murra wrote:
You probably shouldn't need to reinstall. Upgrading the tools
should either fix it automatically, or
Well, consider it confirmed that sid_d-i is doing bidi and shaping for
powerpc already. :) (Confirmation of the readability will have to be
left to someone else. :)
And the official images are now here after we finally managed to have
a daily sid_d-i build to be done:
On Sun, Jun 20, 2004 at 02:45:27PM +0200, Christian Perrier wrote:
D) broken support for 100 gb partitions on i386 (fix: base-installer 0.083)
PUSHED by Martin
Martin Michlmayr point to the bug reporter : Dan C [EMAIL PROTECTED]
We need asking him to confirm if fixed in sid_d-i
Peter
Quoting Steve Langasek ([EMAIL PROTECTED]):
Pushing languagechooser needs pushing countrychooser and lowmem at the
same time
Does lowmem need to go in at the same time, or just before?
In the same time.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe.
After very hard and deep work by Steve Langasek (using preliminary
work from Shlomi Loubaton), the Debian Installer team is proud to
announce that right-to-left (RTL) languages such as Arabic, Hebrew,
Farsi (Persian) and several others (usually called BiDi support) are
now supported by the first
On Montag, 21. Juni 2004 08:22, Patrick Caulfield wrote:
Well, if things seem to be working OK, I wouldn't worry too much
about it! I would have expected vgchange to fail if the MDA
checksums were wrong but it seems not.
In the meantime can you send me a vgdisplay output and a
pvdisplay for
Hi.
As some of you might know, d-i already has some rudimentary
support for people with disabilities. That currently
includes speakup, a kernel patch to enable the usage
of hardware based speech synthesizers during installation (connected
via a serial port) and BRLTTY, a user-space solution to
Processing commands for [EMAIL PROTECTED]:
# Automatically generated email from bts, devscripts version 2.7.95.1
severity 231003 wishlist
Bug#231003: Should include IPv6 support from the beginning
Severity set to `wishlist'.
End of message, stopping processing here.
Please contact me if you
Processing commands for [EMAIL PROTECTED]:
# Automatically generated email from bts, devscripts version 2.7.95.1
merge 253402 255247
Bug#253402: debian-installer: Installer stops if no ethernet card detected
Bug#255247: netcfg: loops when no network hardware is present
Merged 253402 255247.
Processing commands for [EMAIL PROTECTED]:
severity 231655 minor
Bug#231655: Gives error that no network card has been found, even though one is present
Severity set to `minor'.
thanks
Stopping processing here.
Please contact me if you need assistance.
Debian bug tracking system
Processing commands for [EMAIL PROTECTED]:
# Automatically generated email from bts, devscripts version 2.7.95.1
severity 247045 wishlist
Bug#247045: netcfg: It should be possible to cancel DHCP detection
Severity set to `wishlist'.
End of message, stopping processing here.
Please contact me
Processing commands for [EMAIL PROTECTED]:
# Automatically generated email from bts, devscripts version 2.7.95.1
severity 255211 wishlist
Bug#255211: netcfg: Please give choice of whether to try DHCP
Bug#237395: netcfg: Please give choice of whether to try DHCP
Bug#239431: netcfg: Please give
Processing commands for [EMAIL PROTECTED]:
# Automatically generated email from bts, devscripts version 2.7.95.1
severity 255211 wishlist
Bug#255211: netcfg: loops when no network hardware is present
Severity set to `wishlist'.
retitle 255211 netcfg: Please give choice of whether to try DHCP
[Chris Higgins]
Subject: base-config package contains .svn ( subversion ) directories
and readme.txt
Yes, I know. I messed up the last upload. Since then, I've got a few
clues on how to teach debuilt to drop these files, and it will
probably not happen again in the future. :)
--
To
Package: base-config
Version: 2.31
Severity: important
Reading Package Lists... Done
Building Dependency Tree... Done
Calculating Upgrade... Done
The following packages have been kept back:
pgpgpg
0 upgraded, 0 newly installed, 0 to remove and 1 not upgraded.
1 not fully installed or removed.
On Mon, 21 Jun 2004 13:48:38 +0200
Petter Reinholdtsen [EMAIL PROTECTED] wrote:
[Chris Higgins]
Subject: base-config package contains .svn ( subversion )
directories and readme.txt
Yes, I know. I messed up the last upload. Since then, I've got a few
clues on how to teach debuilt to
Hang on, there's an alarm bell that I've not been heeding.
Looking in the code: Incorrect metadata area header checksum is a fatal error.
If that's is occurring on one of tour PVs then the VG should not activate.that
leads me to think it might be another disk/device that is producing the error.
Package: debian-installer
Version: tc1
when doing a 2.6 network boot on one of our servers, the kernel loads
fine until it tries to access the ramdisk. I then tons of errors like
this:
-CUT-
attempt to access beyond end of device
ram0: rw=0, want=16408, limit=16384
Hello,
I tried with the following:
http://cdimage.debian.org/pub/cdimage-testing/sarge_d-i/i386/tc1/sarge-i386-netinst.iso
Now it detected.
So, this report can be closed.
Many thanks.
Andre Felipe Machado
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble?
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Tuesday 15 June 2004 06:46, Christian Perrier wrote:
Quoting Frans Pop ([EMAIL PROTECTED]):
Maybe one issue: I now get LANG=nl_NL in /etc/environment; I think this
used to be [EMAIL PROTECTED]; was that changed ??
The way the locale is
Wenn Sie keine News mehr erhalten möchten, gehen Sie bitte auf unsere Homepage. Mit
einem Klick können Sie sich sofort wieder austragen.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Monday 21 June 2004 14:33, Udo Rader wrote:
-CUT-
attempt to access beyond end of device
ram0: rw=0, want=16408, limit=16384
-CUT-
adding ramdisk_size=16384 on the boot line does not help either, the
kernel
Your message dated Mon, 21 Jun 2004 14:11:45 +0100
with message-id [EMAIL PROTECTED]
and subject line Bug#255380: debian installer does not install Via VT6105 Rhine
ethernet driver
has caused the attached Bug report to be marked as done.
This means that you claim that the problem has been dealt
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sunday 20 June 2004 14:26, Bastian Blank wrote:
Therefor I propose the following changes:
20 netcfg-static
21 network-console
23 choose-mirror
load-installer
download-installer
Maybe the following issue I noticed doing a floppy
Processing commands for [EMAIL PROTECTED]:
# Automatically generated email from bts, devscripts version 2.7.95.1
retitle 251412 Should fail gracefully in absence of network
Bug#251412: Should skip network configuration step is it fails when using a netinst
image
Changed Bug title.
End of
Udo Rader wrote:
Package: debian-installer
Version: tc1
when doing a 2.6 network boot on one of our servers, the kernel loads
fine until it tries to access the ramdisk. I then tons of errors like
this:
-CUT-
attempt to access beyond end of device
ram0: rw=0, want=16408,
Package: debian-installer
Severity: normal
Hi,
i just tried to setup a system with software raid.
Creating the devices etc. was all fine, but installing the base system
failed - the kernel (2.6.x) requires raidtools2 to be installed
(it's mkinitrd that is complaining)
-- System Information:
base-installer_0.086_i386.changes uploaded successfully to localhost
along with the files:
base-installer_0.086.dsc
base-installer_0.086.tar.gz
base-installer_0.086_i386.udeb
Greetings,
Your Debian queue daemon
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of
On Montag, 21. Juni 2004 14:24, Patrick Caulfield wrote:
Hang on, there's an alarm bell that I've not been heeding.
Looking in the code: Incorrect metadata area header checksum is a
fatal error.
If that's is occurring on one of tour PVs then the VG should not
activate.that leads me to think
Processing commands for [EMAIL PROTECTED]:
# Automatically generated email from bts, devscripts version 2.7.95.1
retitle 243543 Should fail gracefully in absence of network
Bug#243543: /etc/network/interfaces - no loopback interface
Changed Bug title.
End of message, stopping processing here.
Processing commands for [EMAIL PROTECTED]:
# Automatically generated email from bts, devscripts version 2.7.95.1
retitle 251412 There should be an option to refrain from configuring the network
after DHCP failure
Bug#251412: Should fail gracefully in absence of network
Changed Bug title.
Processing commands for [EMAIL PROTECTED]:
# Automatically generated email from bts, devscripts version 2.7.95.1
tags 243543 - moreinfo
Bug#243543: Should fail gracefully in absence of network
Tags were: moreinfo
Tags removed: moreinfo
End of message, stopping processing here.
Please contact
Processing commands for [EMAIL PROTECTED]:
# Automatically generated email from bts, devscripts version 2.7.95.1
retitle 244948 Please add PPPoE support
Bug#244948: PPPoE support / optional network config
Changed Bug title.
End of message, stopping processing here.
Please contact me if you
Processing commands for [EMAIL PROTECTED]:
clone 255439 -1
Bug#255439: d-i report
Bug 255439 cloned as bug 255505.
retitle -1 10b9:5451 should use ali5451 module
Bug#255505: d-i report
Changed Bug title.
reassign -1 discover1-data
Bug#255505: 10b9:5451 should use ali5451 module
Bug
Processing commands for [EMAIL PROTECTED]:
reassign 255503 mdcfg
Bug#255503: debian-installer: Software Raid installation fails
Bug reassigned from package `debian-installer' to `mdcfg'.
thanks
Stopping processing here.
Please contact me if you need assistance.
Debian bug tracking system
Quoting Frans Pop ([EMAIL PROTECTED]):
Is there some table available that lists primary currency for a country?
Not afaik
Funnily, I indeed begin to wonder whether we still need these @euro
variants.
When comparing fr_FR and [EMAIL PROTECTED] I only see the comment about
Charset to be
clone 255439 -1
retitle -1 10b9:5451 should use ali5451 module
reassign -1 discover1-data
thanks
* [EMAIL PROTECTED] [EMAIL PROTECTED] [2004-06-20 21:12]:
- Configure /etc/network/inerfaces and you are online;
Was that not done automatically? What was the problem? Was your card
found during
Accepted:
base-installer_0.086.dsc
to pool/main/b/base-installer/base-installer_0.086.dsc
base-installer_0.086.tar.gz
to pool/main/b/base-installer/base-installer_0.086.tar.gz
base-installer_0.086_i386.udeb
to pool/main/b/base-installer/base-installer_0.086_i386.udeb
Announcing to [EMAIL
reassign 255503 mdcfg
thanks
* Erich Schubert [EMAIL PROTECTED] [2004-06-21 15:41]:
i just tried to setup a system with software raid. Creating the
devices etc. was all fine, but installing the base system failed -
the kernel (2.6.x) requires raidtools2 to be installed (it's
mkinitrd that is
that amazing blue sex pill is now offered for $2.38 per dose.
Typically, a 50mg dosage will produce erections lasting up to 4 hours.
You can place your order and pay using Visa, MC, Amex, Discover, or Diners
Club.
Jeanie Annunziata
On Mon, Jun 21, 2004 at 03:58:37PM +0200, Matthias Murra wrote:
On Montag, 21. Juni 2004 14:24, Patrick Caulfield wrote:
Hang on, there's an alarm bell that I've not been heeding.
Looking in the code: Incorrect metadata area header checksum is a
fatal error.
If that's is occurring on
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Monday 21 June 2004 16:06, Christian Perrier wrote:
[EMAIL PROTECTED] basically is a copy of fr_FR:-)
Hmm yes, I see what you mean.
The same goes for nl_NL and nl_BE (and for de_LU and es_ES which I checked at
random). There's really only
Well done.
In case you don't know, although the text here is RTL (it's arabic,
after all). the layout does not seem to be:
http://people.debian.org/~bubulle/d-i/screenshots/netcfg-arabic2.png
On Mon, 2004-06-21 at 09:53 +0200, Christian Perrier wrote:
After very hard and deep work by Steve
Frans Pop wrote:
[snip]
With the cd-drivers floppy, two other menu items are added:
- - Choose language (10)
- - Choose country or region (11)
- - Detect and mount CD-ROM (14)
- - Load drivers from a floppy (12)
- - Select a keyboard layout (12)
- - Load installer components from CD (14)
-
Your message dated Mon, 21 Jun 2004 16:43:45 +0200
with message-id [EMAIL PROTECTED]
and subject line Bug#255497: invalid ramdisk size for netboot on i386
has caused the attached Bug report to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the
On Montag, 21. Juni 2004 16:18, Patrick Caulfield wrote:
Ah, so you did pvcreate on it (or the installer did), then did mkfs
over that? I can imagine that would have an odd effect on the LVM
metadata!
The installer seems to have done that, yes. I thought the installer's
behavior was pretty
On Mon, Jun 21, 2004 at 04:40:50PM +0200, Frans Pop wrote:
On Monday 21 June 2004 16:06, Christian Perrier wrote:
[EMAIL PROTECTED] basically is a copy of fr_FR:-)
Hmm yes, I see what you mean.
The same goes for nl_NL and nl_BE (and for de_LU and es_ES which I checked at
random).
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Monday 21 June 2004 17:20, Steve Langasek wrote:
So there's no difference in the actual charset that each is pointed to,
the only difference is in a comment about the charset?
Well, the line definitely is a comment. I don't see a reference to a
* Matthias Murra [EMAIL PROTECTED] [2004-06-21 17:17]:
It's certainly not lvm's fault if the installer screwed up a bit, so
yes, this bug probably can be closed -- or reassigned to the
So what exactly did the installer do? From what I can see, you
created some LVM devices, but they were
Quoting Steve Langasek ([EMAIL PROTECTED]):
(comparing fr_FR and [EMAIL PROTECTED] more generally all @euro
variants of locales)
So there's no difference in the actual charset that each is pointed to,
the only difference is in a comment about the charset?
Yes, as far as I understand. [EMAIL
Unfortunately, something seems to have broken recently, and
the currently generated access floppy images do not boot anymore.
The boot floppy starts to load normally, and after some time, SYSLINUX reports:
Boot failed: Please change disks and press any key to continue.
After some
Package: debian-installer
Version: tc1
During installation I was successfully able to set up a kernel 2.6 based
software raid1 array with XFS on it, but after the reboot the array is
not accessible:
-CUT-
$ mount /usr
XFS: SB read failed
mount: /dev/md0: can't read superblock
Package: installation-reports
Debian-installer-version: jbailey's 21.06.2004 daily build
uname -a:
Linux caradhras 2.4.26-32-smp #1 SMP Thu Apr 29 03:20:53 UTC 2004 parisc GNU/Linux
Date: Mon Jun 21 13:33:07 EDT 2004
Method: Network booted from local TFTP server.
Machine: HP Visualize B180L+
On Mon, Jun 21, 2004 at 07:41:45PM +0200, Udo Rader wrote:
Package: debian-installer
Version: tc1
During installation I was successfully able to set up a kernel 2.6 based
software raid1 array with XFS on it, but after the reboot the array is
not accessible:
-CUT-
$ mount
: amd64 (x86_64)
Kernel: Linux 2.6.5-amd64
Locale: LANG=C, LC_CTYPE=C
Automatic build of anna_0.064-0.0.1 on dual by sbuild/amd64 1.169
Build started at 20040621-1726
**
Checking available source versions...
Fetching source
* Kyle McMartin [EMAIL PROTECTED] [2004-06-21 14:10]:
System came up fine! Used tasksel to install a few tasks with
no issues. The only conceivable problem is that in my xterm running
minicom to the B180, tasksel does not highlight what you currently have
tabbed, which meant I had to
On Mon, Jun 21, 2004 at 07:24:21PM +0100, Martin Michlmayr wrote:
I guess you're not using colour with minicom?
I'm using the sane defaults.
Regards,
--
Kyle McMartin
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Package: installation-reports
INSTALL REPORT
Debian-installer-version:
http://cdimage.debian.org/pub/cdimage-testing/sarge_d-i/i386/200406018/sarge-i386-netinst.iso
(Daily build net install from, June 18, 2004)
uname -a:
Linux deacon 2.4.26-1-386 #2 Sat May 1 16:31:24 EST 2004 i686 GNU/Linux
Udo Rader wrote:
Package: debian-installer
Version: tc1
During installation I was successfully able to set up a kernel 2.6 based
software raid1 array with XFS on it, but after the reboot the array is
not accessible:
-CUT-
$ mount /usr
XFS: SB read failed
mount: /dev/md0: can't read
also sprach Goswin von Brederlow [EMAIL PROTECTED] [2004.06.21.0049 +0200]:
Umount and eject the cd after installing choose-mirror.
Mh. Interesting. I wonder why I have to go to the console to make
this happen... the eject package does not seem to work here...
What's the logic for selection of
Processing commands for [EMAIL PROTECTED]:
reassign 255541 mdcfg
Bug#255541: software raid1 installation fails
Bug reassigned from package `debian-installer' to `mdcfg'.
--
Stopping processing here.
Please contact me if you need assistance.
Debian bug tracking system administrator
* Udo Rader [EMAIL PROTECTED] [2004-06-21 19:41]:
During installation I was successfully able to set up a kernel 2.6 based
software raid1 array with XFS on it, but after the reboot the array is
not accessible:
I guess this might be bug http://bugs.debian.org/231823
--
Martin Michlmayr
[EMAIL
Your message dated Mon, 21 Jun 2004 20:26:39 +0100
with message-id [EMAIL PROTECTED]
and subject line Bug#255549: debian-installer report
has caused the attached Bug report to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your
Martin Michlmayr wrote:
* tbm [EMAIL PROTECTED] [2004-05-31 13:37]:
1) partman won't let you build an LVM on top of a RAID device
Still there. This needs changed to libparted - maybe you can look at
this.
I haven't looked at this. If it doesn't involve lots of coding, I may
be able to take a
dblxgiwl oojrjqegh oguahkodk lcnkgtdw rathm prqmz
nycyrycz xntikliar junxyjkp krzymp dsxyirf, gfebceifu
fhaicngxj auswilh, wdmka wqmbgqhsj fgbab ocuftgolv riwhg. oshbq
zrunderb- gdwdx gdzdbo vlsakh vljdi qmrrxlwt
lvyho ypexhjpv ovmvwwbqv txnmbyi josmdmzl glmtm nbshv rpbity yknwizabx
tqkqowtq
On Mon, Jun 21, 2004 at 05:45:21PM +0200, Christian Perrier wrote:
Quoting Steve Langasek ([EMAIL PROTECTED]):
(comparing fr_FR and [EMAIL PROTECTED] more generally all @euro
variants of locales)
So there's no difference in the actual charset that each is pointed to,
the only difference
Hi!
On Mon, Jun 21, 2004 at 03:28:29PM -0500, Charles Steinkuehler wrote:
Martin Michlmayr wrote:
3) Grub install fails when /boot is on a RAID1 device
Still there.
Attached are two patches to address this (one for grub-install, and one
for update-grub). Patches are against the version
Package: installation-reports
Debian-installer-version:
Debian GNU/Linux testing Sarge - Official Snapshot
i386 Binary-1 (2004-06-19), obtained via jigdo from
ftp.de.debian.org
uname -a: n/a
Date: 2004-06-21 06:00:00 +
Method: installation from CD-ROM (with bootable Debian CD)
Your message dated Tue, 22 Jun 2004 08:09:54 +1000
with message-id [EMAIL PROTECTED]
and subject line (forw) Bug#253106: Fixed?
has caused the attached Bug report to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your
On Tue, Jun 15, 2004 at 23:08 +0200, Thorsten Schaefer wrote:
Seems I said to early that it is working fine now. With the daily
build from June 14th that I downloaded and tested today, the issue is
there again (for the REM56G-100). I checked syslog and the same
messages as reported earlier
On Monday 21 June 2004 23:48, Martin Hasch wrote:
Debian installation CD #1 booted without trouble into the
installer menu. However, I could not assign the root filesystem
where I wanted it, though both disks and their partitions were
recognized. But whenever I selected a partition of disk 2
On Sun, Jun 20, 2004 at 08:25:06AM +0200, Christian Perrier wrote:
Quoting Eugeniy Meshcheryakov ([EMAIL PROTECTED]):
Christian Perrier wrote:
Currently unusable in cdebconf (seems to be a whiptail bug in Unicode
environments). Just try to enter any non ASCII character in a dialog
* Denis Barbier [2004-06-22 01:09:05+0200]
[...]
If eacute is replaced by its Unicode notation U+00E9 in keymap
file, everything works fine now. But this keymap cannot be used
when keyboard is in ASCII mode, The only solution is to have two
keymaps, one for ASCII mode and the other one for
On Mon, Jun 21, 2004 at 05:46:25PM +0200, Christian Perrier wrote:
(I announced a CC and forgot to really do it)
- Forwarded message from Christian Perrier [EMAIL PROTECTED] -
Date: Mon, 21 Jun 2004 17:45:21 +0200
From: Christian Perrier [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
On Mon, Jun 14, 2004 at 10:32:51PM +0200, Christian Perrier wrote:
Quoting Steve Langasek ([EMAIL PROTECTED]):
In the tests I've done with the new languagechooser, almost all of the
entries are displayed in English, and there doesn't seem to be a short
list provided by countrychooser.
Hello,
Did you recieve my email from last week? I'm happy to tell you
that you are approved for a home loan with a 1.77% rate.
Your tracking number is # A7 038 699
You must visit the link below in 24 hrs to confirm your details.
http://www.refihome.info/aff/ke.php?uid=49
Best Regards,
Tamika
linux-kernel-di-ia64_0.54.dsc doesn't exist
linux-kernel-di-ia64_0.54.tar.gz doesn't exist
fb-modules-2.4.26-itanium-smp-di_0.54_ia64.udeb has incorrect size; deleting it
Due to the errors above, the .changes file couldn't be processed.
Please fix the problems for the upload to happen.
Greetings,
Package: modconf
Version: 0.2.45.1
Severity: normal
Followup-For: Bug #235068
Hi,
modconf should not require human intervention to unpack the kernel
source proided by a kernel-source package. The attached patch uses the
@sources array of available kernel sources to unpack them and test for
Your message dated Tue, 22 Jun 2004 07:24:09 +0200
with message-id [EMAIL PROTECTED]
and subject line Bug#251412: Fixed?
has caused the attached Bug report to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility
83 matches
Mail list logo