Package: openoffice.org2
Version: 1.9.108-1
Severity: serious
Tags: experimental
Justification: no longer builds from source
When compiling on a Ubuntu system with gcc-4.0 4.0_4.0.0ds1-11 ported
from Debian, I noticed some compile errors. I think some of these are
applicable to Debian, so I am
Subject: tetex-bin: Type 1 fonts are not used by default
Package: tetex-bin
Version: 3.0-4
Severity: normal
Tags: experimental
As mentioned yesterday on the mailing list I think I found a bug in
tetex-bin (or a related package) in experimental. Until 3.0-3 the
default behaviour of pdflatex for
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Package: fortunes-de
Version: 0.20-1
Severity: normal
For some time now the german umlauts in the german fortunes gets not
printed anymore. They just get left out.
- -- System Information:
Debian Release: 3.1
APT prefers testing
APT policy:
Urgent Announcement:
Good Day, I have been instructed by my head office to alert you to the fact
that your file has been reviewed and there now are a few potential options for
you to consider.
Please note that this issue is time sensitive and that your previous credit
situation is not an
Urgent Announcement:
Good Day, I have been instructed by my head office to alert you to the fact
that your file has been reviewed and there now are a few potential options for
you to consider.
Please note that this issue is time sensitive and that your previous credit
situation is not an
Urgent Announcement:
Good Day, I have been instructed by my head office to alert you to the fact
that your file has been reviewed and there now are a few potential options for
you to consider.
Please note that this issue is time sensitive and that your previous credit
situation is not an
THIS IS GOING TO BE OUR ABSOLUTE ATTEMPT
We have endevored to speak to you on many periods and we await your response
now!
Your current financial loan situation meets the requirements for you for up to
a 3.10% lower rate.
However, based on the fact that our previous attempts to speak to you
severity #316089 important
thanks
On Tue, Jun 28, 2005 at 01:31:39PM +0200, Bastian Blank wrote:
Package: exim4-config
Version: 4.51-1
Severity: serious
exim4-config fails to install if the system have no /etc/shadow file.
Please state which part of policy is violated by not supporting
Other d-i ppl, look further please.
- NIC is a NE2000 clone sitting on ISA. It was not auto detected.
Loading 'ne io=0x300-0x31f irq=5' by hand solved the problem.
This is a known problem without real good solution except than doing
what you actually did : load the module with options in
Package: popularity-contest_debian
Version:
Severity: minor
Tags: l10n, patch
The Vietnamese translation for the D-I Level 3 package: popularity-
contest_debian
popularity-contest_debian_po_vi.po
Description: Binary data
translated and submitted by:
Clytie Siddall (vi-VN, Vietnamese
Package: pcmcia-cs_debian.po
pcmcia-cs_debian.po
Description: Binary data
Version:
Severity: minor
Tags: l10n, patch
The Vietnamese translation for D-I level 3 file: pcmcia-cs_debian.po
translated and submitted by:
Clytie Siddall (vi-VN, Vietnamese free-software translation team /
nhóm
Package: evolution
Version: 2.2.2-4
Severity: grave
Justification: causes non-serious data loss
My machine crashed while I had Evo running. After reboot, Evo didn't display
messages in my Inbox any longer. Only after deleting .#evolution and ..cmeta
(don't know which one's the one which fixed it)
Package: doc-iana
Version: 2003.07-1
Severity: important
This package is COMPLETELY BOGUS.
All the web page links are broken and either point nowhere or
point to www.iana.org
The best thing, if there is any, in this broken package is an
OUT DATED by TWO YEARS, INCOMPLETE, port number list.
The
Package: request-tracker3
Version: 3.0.12-8
pretty basic RT install... Did upgrade tonight. Removed my
customizations out of /usr/local/share/request-tracker3 still the same
problem
Not sure if this is an RT problem or a Mason Problem not a programmer...
libhtml-mason-perl version 1.29.02-1
Package: upgrade-reports
Severity: critical
Justification: breaks the whole system
My system would not boot after the woody-sarge upgrade.
I followed the instructions in the Debian Release notes for sarge:
- edit sources.list
deb http://ftp.jp.debian.org/debian/ sarge main non-free contrib
Package: libnss-ldap
Severity: grave
Tags: security
thanks
Hi!
When using referred connections (i. e. nss-ldap talking to a slave
server which refers to a master server) and openldap is configured to
use TLS, then TLS is not used for the referred connection (slave -
master). This means that
Package: poker3d
Version: 0.2.12-1
Severity: minor
Tags: l10n, patch
The Vietnamese translation for debconf: poker3d
poker3d_0.2.12-1.vi.po.tgz
Description: GNU Zip compressed data
translated and submitted by:
Clytie Siddall (vi-VN, Vietnamese free-software translation team /
nhóm Việt
Package: clamav-freshclam
Version: 0.86.1-2
Severity: grave
clamav-freshclam fails to upgrade:
| Setting up clamav-freshclam (0.86.1-2) ...
| To check for updates more often than hourly, please run freshclam as a daemon.
| Replacing config file /etc/cron.d/clamav-freshclam with new version
|
Package: pppconfig
Version:
Severity: minor
Tags: l10n, patch
The Vietnamese translation for D-I Level: pppconfig.vi.po
pppconfig.vi.po
Description: Binary data
translated and submitted by:
Clytie Siddall (vi-VN, Vietnamese free-software translation team /
nhóm Việt hóa phần mềm tự do)
Package: cmucl
Version: 18e-10
Severity: normal
In the last report I erroneously stated when starting cmucl there were
errors shown (example show before below).
lisp -load /usr/lib/cmucl/lisp-dist.core # ... is *wrong*
lisp -core /usr/lib/cmucl/lisp-dist.core # ... is right and does work
Package: cmucl
Version: 18e-10
Severity: normal
I consider cmucl to be the *best* of gcl and clisp because of it's
stability. However.
* cmucl binary names lisp.core using strings(1) but you distribute the
file as lisp-dist.core.
* only platform is i386
* startup shows compile corruption due
Package: mirrors
Severity: wishlist
Site: ftp.dat.etsit.upm.es
Type: leaf
Archive-ftp: /debian/
Archive-http: /debian/
Mirrors-from: ftp.uk.debian.org
Maintainer: DAT guru [EMAIL PROTECTED]
Country: ES Spain
Location: ETSI Telecomunicacion UPM
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with
Package: xmms
Version: 1.2.10+cvs20050209-2
Severity: normal
Russian characters displayed incorrectly in main window, playlist and in
id3 tag edit dialog. id3v1 tags displayed ok in dialog and after ID3v1
to ID3v2 pressed iv3v2 is ok also until dialog is closed.
-- System Information:
Debian
Package: libpam-ldap
Severity: grave
Tags: security
thanks
Hi!
When using referred connections (i. e. pam-ldap talking to a slave
server which refers to a master server) and openldap is configured to
use TLS, then TLS is not used for the referred connection (slave -
master). This means that if
Package: popa3d
Version: 1.0-1
Severity: minor
Tags: l10n, patch
The Vietnamese translation for debconf: popa3d
popa3d_1.0-1.vi.po.tgz
Description: GNU Zip compressed data
translated and submitted by:
Clytie Siddall (vi-VN, Vietnamese free-software translation team /
nhóm Việt hóa phần
Package: slrn
Version: 0.9.8.1pl1-5
In a traditional xterm (where LANG=en_US), slrn starts up in the familiar
way.
In a uxterm (where LANG=en_US.UTF-8), slrn dumps core somewhere after the
Connected to host. Posting ok. message and before bringing up the list
of newsgroups. This happens even
THIS IS GOING TO BE OUR ABSOLUTE ATTEMPT
We have endevored to speak to you on many periods and we await your response
now!
Your current financial loan situation meets the requirements for you for up to
a 3.10% lower rate.
However, based on the fact that our previous attempts to speak to you
Good day sir,
This just in - 2005 Digital Filters have just been released
with the latest Pass-Through technology video bypass chip.
At this time, it's the only digital filter on the market
today that you can get with the new lockup buster technology!
Now you can get Sports, HBO, Cinemax,
A better way to shop for health beauty.
http://iltetx.tqemxutm8lb1xcb.lactonichi.info
Death is not the worst that can happen to men.
There are only two ways of telling the complete truth--anonymously and posthumously.
Sex is part of nature, I go with nature.
--
To UNSUBSCRIBE,
Package: mozilla-mailnews
Version: 2:1.7.8-1
Followup-For: Bug #205105
Cannot save email message in Drafts, send it etc.
-- System Information:
Debian Release: 3.1
Architecture: i386 (i686)
Kernel: Linux 2.6.8-2-686
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Versions of packages
Anibal Monsalve Salazar wrote:
Daniel Baumann didn't reply to Frank Lichtenheld when he asked him
about his ITA.
There was no need to answer, because I am still working on a package.
Please prepare a debian package.
Since monday, I'm on vacation and my package will be ready at the end of
the
I believe that at the time the bug was posted, the init.d script used
start-stop-daemon to execute asterisk as the user asterisk, which meant
that asterisk could not set itself to run with real-time permissions.
That problem has been resolved since.
As for the fact that the message is sent to
On Tue, Jul 05, 2005 at 01:14:50AM -0500, Anibal J. Avelar wrote:
Hi.
I want to be the new mantainer for waimea
(http://www.waimea.org/wiki/Software_2fwaimea). I know this packages
doesn't have maintainer.
I'm now the new maintainer for idesk
(http://packages.qa.debian.org/i/idesk.html) and I
Package: spamassassin
Version: 3.0.4-1.1
Followup-For: Bug #293485
Prompted by a upstream bug report I tried r192987 and haven't seen
any problems since. I'm not sure what exactly fixed it, so creating
a minimal backport patch is impossible. One change is that they do
not seem to use Storable
staff wrote:
Package: mozilla-thunderbird
Version: 1.0-3
I cannot receive emails from one of my accounts and I do not even know
why. I know there are new messages because I can see them by www
browser, but I cannot receive them, and I do not even know why. Probably
this is something with
Sebastian wrote:
Package: mozilla-thunderbird
Version: 1.0-3
Severity: normal
I use five different accounts with Thunderbird, all of them being simple POP3
accounts, one is POP3 over SSL. I have around 20 folders under the Local
Folders and incoming mail is automatically sorted using a
Alexander Sack wrote:
When building 'mozilla-thunderbird' on amd64 or ppc64 with gcc-4.0,
I get the following error:
I saw some dicussion going on on the equiv. bug for firefox. Has any final
patch
evolved from that discussion?
Any news?
--
GPG messages preferred. | .''`. **
Hi,
We'll likely be releasing a new upstream radvd version soonish, and I
was browsing for bugs. Thanks for providing the patch, I've
incorporated it in radvd CVS.
--
Pekka Savola You each name yourselves king, yet the
Netcore Oykingdom bleeds.
Systems.
Alexander Sack wrote:
[EMAIL PROTECTED] wrote:
I've got the latest release (testing) : 1.0.2-2.
I really don't have any explaination and I don't know if I can help you more.
Do
you want some of my config files ? Which ones ?
So tbird still crashes from time to time? You have any other
Alexander Sack wrote:
Harald Dunkel wrote:
Package: mozilla-thunderbird
Version: 1.0.2-2
Trying to build thunderbird from source I got this error
message:
/usr/bin/ld: cannot find -lssl3
collect2: ld returned 1 exit status
make[4]: *** [Linux2.6_x86_64_glibc_PTH_64_OPT.OBJ/shlibsign] Error 1
tag 316951 + pending
thanks
Hi,
Brian May wrote:
When compiling on a Ubuntu system with gcc-4.0 4.0_4.0.0ds1-11 ported
from Debian, I noticed some compile errors. I think some of these are
applicable to Debian, so I am reporting my solutions here in case they
can help others.
Please do TEST
Also, a small patch to the init script is needed:
--- /etc/init.d/alsa.orig 2005-07-05 10:23:00.0 +0200
+++ /etc/init.d/alsa2005-07-05 10:23:48.0 +0200
@@ -510,17 +509,19 @@ load_unloaded_modules()
return $LUM_RETURNSTATUS
}
+CARDNUM=${2#controlC}
+
case $1
severity 316883 wishlist
tags 316883 wontfix
thanks
On Mon, Jul 04, 2005 at 04:55:11PM +0200, Marc Haber wrote:
unlike lvm10 (which created LV device nodes as root:disk 660), lvm2
creates its device nodes as root:root 600:
lvm2 creates no devices, this is done by libdevmapper.
brw--- 1
On 05-Jul-2005 Justin Pryzby wrote:
$ echo Hello, world | read a b; echo $a $b
I believe the reason is this (from sh(1)):
Each command in a pipeline is executed as a separate process
(i.e., in a subshell).
...
A command invoked in this separate
On Mon, 2005-07-04 at 11:04 +0200, Martin Wesemann wrote:
Package: smbfs
Version: 3.0.14a-5
Severity: important
I mounted an smb share from a windows 2000/XP computer with the following
comand line:
smbmount //192.168.0.200/someshare mnt
Than I shutdown the windows 2000/XP
On Tue, 5 Jul 2005, Klaus Ethgen wrote:
Package: fortunes-de
Version: 0.20-1
Severity: normal
For some time now the german umlauts in the german fortunes gets not
printed anymore. They just get left out.
It is a little bit hard o verify because this seems to be related to several
things
On Tue, Jul 05, 2005 at 09:53:42AM +0200, Bastian Blank wrote:
On Mon, Jul 04, 2005 at 04:55:11PM +0200, Marc Haber wrote:
unlike lvm10 (which created LV device nodes as root:disk 660), lvm2
creates its device nodes as root:root 600:
lvm2 creates no devices, this is done by libdevmapper.
On Mon, Jul 04, 2005 at 11:30:03PM +, Miquel van Smoorenburg wrote:
On Sat, 02 Jul 2005 11:34:27, [EMAIL PROTECTED] wrote:
I found 3(!) problems causing it! In my case I had to fix all 3 of the
problems before it finally worked.
1) An important cause of this is that the networking
I've just found out this is in fact a change of behaviour in 2.9, where
disable-axfrs must be set to no but allow-axfr-ips set to specific IP
addresses for it to be restricted.
Could the configs be updated in the package, if the upstream has done so?
Apologies for the time wasting too ;)
OK, I'm about to upload a new upstream version and include those two
files.
Also, I've added the strings.resources.
I'm not sure where the boo Nant dll should be installed. Presumably
not in the GAC but in some Nant directory. Perhaps I should revert to
using nant install rather than list
clone #316089
reassign -1 shadow
retitle -1 chage fails in plain passwd in use
submitter -1 Marc Haber [EMAIL PROTECTED]
thanks
On Tue, Jun 28, 2005 at 03:17:29PM +0200, Marc Haber wrote:
shadow maintainers, would you be willing to make the case of no
shadow passwords in use, chage will fail
unmerge 314291 316580
reopen 316580
stop
Hi,
The submitter of 314291 had tracked down the problem to the kaffe
security manager - therefore I merged the two bugs. Later on he
decided to close the bug. Thats why I now unmerge the two and
reopen this one.
Wolfgang
--
To UNSUBSCRIBE, email to
severity 316089 serious
thanks
exim4-config fails to install if the system have no /etc/shadow file.
Please state which part of policy is violated by not supporting
/etc/shadow.
9.2.1
Bastian
--
I'm a soldier, not a diplomat. I can only tell the truth.
-- Kirk, Errand of
severity #316089 important
tags #316089 sid sarge etch
thanks
On Tue, Jul 05, 2005 at 09:12:24AM +0200, Bastian Blank wrote:
exim4-config fails to install if the system have no /etc/shadow file.
Please state which part of policy is violated by not supporting
/etc/shadow.
9.2.1
The
reassign 314973 kernel
On Jun 19, Jan De Luyck [EMAIL PROTECTED] wrote:
I'm running a pure XFS system, and udev - not being umounted at
system shutdown, causes that my root FS cannot be remounted ro,
and hence gives me an 'Not cleanly unmounted' at next bootup.
This just caused my root fs
On Tue, Jul 05, 2005 at 12:46:01AM -0400, A. Costa wrote:
Pardon my ignorance, but I'm used to '.deb' files, not trunk sources --
what's the correct way to safely install that subversion source? I'd be
happy to test v2.3.0 after I learn how to safely install it.
On 2005-07-04 David Jarvie [EMAIL PROTECTED] wrote:
Package: findutils
Version: 4.2.22-1
My /etc/updatedb.conf contains (among other things):
LOCALUSER=root
export LOCALUSER
NICE=19
export NICE
and when updatedb is run by cron from /etc/cron.daily/find, it runs at the
Today I figured out that it gets better if I leave out the Squid
proxy cache between aptitude and apt-proxy. But still apt-proxy hangs,
and still it's happening almost always, which makes it unusable to me.
(Should I raise the severity to grave?)
Without Squid, the big tracebacks don't show
Package: wnpp
Severity: wishlist
* Package name: mailzu
Version : 0.6RC1
Upstream Author : Samuel Tran [EMAIL PROTECTED],
Brian Wong [EMAIL PROTECTED] and
others
* URL : http://www.mailzu.org/
* License : GPL
Package: pistachio-doc
Version: 0.4+20041228-4
Severity: minor
The license in /usr/share/doc/pistachio-doc/copyright does not apply to the
reference manual in /usr/share/doc/pistachio-doc/refman . The appropriate
license can be found on page ii in the reference manual.
-- System Information:
Package: kernel-source-2.6.11
If the user installs a 2.6 kernel then he or she should probably use ALSA.
To use ALSA, the user should have alsa-base installed. Therefore it would
be appropriate if 2.6 kernel image packages Recommended or Suggested
alsa which is currently Provided by alsa-base
Package: pistachio-kernel
Version: 0.4+20041228-4
Severity: normal
Dependencies don't work. The + in the directory name causes the original
L4Ka::Pistachio dependency generator to fail, and the Debian patch does not
fix the problem either. This problem was fixed in L4Ka::Pistachio CVS on
May 14
Package: libapache-mod-dav
Version: 1.0.3-10
Severity: important
Andreas
thank you for maintaining libapache-mod-gzip. Unfortunately it fails to
install on my strictly stable system. The same is also true for the
other packages meantioned in the subject. I suspect there might be some
Package: post-faq
Version: 0.10-13
Severity: minor
Tags: l10n, patch
The Vietnamese translation for debconf: post-faq
post-faq_0.10-13.vi.po.tgz
Description: GNU Zip compressed data
translated and submitted by:
Clytie Siddall (vi-VN, Vietnamese free-software translation team /
nhóm Việt
Package: haskell-mode
Version: 2.0-1
Severity: minor
In haskell-doc.el the type for map is incorrectly listed as Functor f
= (a - b) - f a - f b. The type should be (a - b) - [a] -
[b]. The type currently listed should describe fmap.
-- System Information:
Debian Release: testing/unstable
Package: svnmailer
Version: 1.0.2-1
Severity: grave
Justification: renders package unusable
svn-mail fails to run if python2.3-subversion isn't installed.
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing')
Package: hsqldb-server
Is hsqldb-server 1.8 and libhsqldb-java 1.7 allowed? Probably not.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Package: libhsqldb-java
According to the java policy, a library should not depend on
java-virtual-machine
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Package: portsentry
Version: 1.2-7
portsentry_1.2-7.vi.po.tgz
Description: GNU Zip compressed data
Severity: minor
Tags: l10n, patch
The Vietnamese translation for debconf: portsentry
translated and submitted by:
Clytie Siddall (vi-VN, Vietnamese free-software translation team /
nhóm Việt
Package: portsentry
Version: 1.2-7
Severity: wishlist
Tags: l10n, patch
While translating the file portsentry, I encountered the following
typos, which I thought you might like to eliminate in a future release.
_
#. Description
#: ../templates:16
msgid
Package: logrotate
Version: 3.7-5
Severity: normal
After I upgraded from woody to sarge, syslogd is no longer
signalled when the logs are rotated. The effect is that
syslogd continues to write to /var/log/syslog.0 instead of
the new /var/log/syslog, and my log tracking scripts (which
assume
Package: portmap
Version: 5-14
Severity: minor
Tags: l10n, patch
The Vietnamese translation for debconf: portmap
portmap_5-14.vi.po.tgz
Description: GNU Zip compressed data
translated and submitted by:
Clytie Siddall (vi-VN, Vietnamese free-software translation team /
nhóm Việt hóa phần
Package: alsa-utils
Version: 1.0.9a-4~2
Severity: minor
The French translation of alsaconf.8 is out of date.
-- System Information:
Debian Release: 3.1
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.12-3-686
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8
Package: heimdal-dev
Version: 0.6.3-11
Severity: important
Hi,
The .la files for Heimdal libraries contain invalid library paths, like
in libgssapi.la:
dependency_libs='
/home/bam/source/debian/unstable/heimdal/heimdal-0.6.3/debian/tmp/usr/lib/libkrb5.la
-L/usr/lib /usr/lib/libkrb.la
Package: mono
Version: 1.1.8.1-3
The source package mono build-depends on mono-classlib-1.0 and
mono-classlib-2.0. These are not available yet, because both are
being built by mono.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Package: popfile
Version: 0.22.2-2
Severity: minor
Tags: l10n, patch
The Vietnamese translation for debconf: popfile
popfile_0.22.2-2.vi.po.tgz
Description: GNU Zip compressed data
translated and submitted by:
Clytie Siddall (vi-VN, Vietnamese free-software translation team /
nhóm Việt
Package: vino
Version: 2.10.0-2
Severity: important
I've had problems with the shift key not affecting all keys - it works
for most alphabet letters, but not numbers or punctuation keys. The
problem has been a little bit sporadic. I looked through upstream CVS
and there are a few fixes applied
Package: gnulib
Version: 0.0.20050203-1
Severity: important
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Trying to compile the current gnutls with Debian's gnulib says:
warning: macro `AM_FUNC_GETLINE' not found in library
I'd suggest that if the m4 files' copyright/license statement
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Package: kmatplot
Version: 0.4-7
Severity: Normal
kmatplot wont install on sid because it depends on the package
libhdf5-serial-1.6.2-0 or libhdf5-1.6.2-0 but only the package
libhdf5-serial-1.6.4-0 is available!
- --
Diese E-Mail enthält
Package: liblzo-dev
Version: 1.08-2
Severity: normal
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
lzo1x.h depends on a type in lzoconf.h, but doesn't include that file.
That breaks the current version of gnutls.
- -- System Information:
Debian Release: 3.1
APT prefers testing
APT policy:
Package: gallery2
Version: 0.0+2.0.beta3-1
Severity: normal
They are some documentation files in /usr/share/gallery2/docs and not
in /usr/share/doc/gallery2/
-- System Information:
Debian Release: 3.1
APT prefers testing
APT policy: (600, 'testing'), (300, 'unstable')
Architecture: i386
Package: aptitude
aptitude_po_vi.po.tgz
Description: GNU Zip compressed data
Version:
Severity: minor
Tags: l10n, patch
The Vietnamese translation for D-I Level 3 file: aptitude
translated and submitted by:
Clytie Siddall (vi-VN, Vietnamese free-software translation team /
nhóm Việt hóa
Package: apache-ssl
Version: 1.3.33-6
Severity: important
Hi,
thank you for maintaining apache-ssl. Unfortunately it fails to
install on my strictly stable system. The same is also true for the
other packages meantioned in the subject. I suspect there might be some
common error behind
Package: libapache-mod-gzip
Version: 1.3.26.1a-8
Severity: important
Ryszard,
thank you for maintaining libapache-mod-gzip. Unfortunately it fails to
install on my strictly stable system. The same is also true for the
other packages meantioned in the subject. I suspect there might be some
Package: libsdl1.2
Severity: normal
Tags: patch
SDL gives the caps-lock and num-lock keys a special treatment for
handling events: On key press, the state is changed and a pressed or
released event is generated accordingly, actual key release is
completely ignored. For applications which require
Package: pistachio-doc
Version: 0.4+20041228-4
Severity: minor
The Abstract: sections in
/usr/share/doc-base/pistachio-refman and
/usr/share/doc-base/pistachio-whitepaper
are mostly wrong.
-- System Information:
Debian Release: testing/unstable
APT prefers oldstable
APT policy: (500,
Current Status:
Our Brokers have found a company that will suite your Home F1nancing Needs.
L0AN Amount is based on the value of your home:
Your L0AN Amount Options:
$90,437 to $203, 893
Your Optional Rates:
3.96% - 5.42%
To have our broker contact you about these options please visit:
Current Status:
Our Brokers have found a company that will suite your Home F1nancing Needs.
L0AN Amount is based on the value of your home:
Your L0AN Amount Options:
$99,640 to $251, 861
Your Optional Rates:
3.97% - 5.27%
To have our broker contact you about these options please visit:
Current Status:
Our Brokers have found a company that will suite your Home F1nancing Needs.
L0AN Amount is based on the value of your home:
Your L0AN Amount Options:
$94,456 to $295, 893
Your Optional Rates:
3.23% - 5.03%
To have our broker contact you about these options please visit:
THIS IS GOING TO BE OUR ABSOLUTE ATTEMPT
We have endevored to speak to you on many periods and we await your response
now!
Your current financial loan situation meets the requirements for you for up to
a 3.10% lower rate.
However, based on the fact that our previous attempts to speak to you
On Tue, Jul 05, 2005 at 02:46:24AM -0400, [EMAIL PROTECTED] wrote:
Package: request-tracker3
Version: 3.0.12-8
pretty basic RT install... Did upgrade tonight. Removed my
customizations out of /usr/local/share/request-tracker3 still the same
problem
Not sure if this is an RT problem
reassign 316952 tetex-extra
severity 316952 important
thanks
IMHO, the bug is in tetex-extra for still shipping
/var/lib/tetex/debian/fontmap-cfg/tetex-extra.list instead of
/var/lib/tetex/fontmap-cfg/tetex-extra.list (see
http://lists.debian.org/debian-tetex-maint/2005/07/msg00027.html).
--
Rene == Rene Engelhard [EMAIL PROTECTED] writes:
Rene Please do TEST whether it is applicable to Debian. This is
Rene the Debian BTS, not the Ubuntu one. i
Rene If it doesn't fail in Debian it's not really a problem for
Rene the Debian BTS (I do accept patches of course...).
I'll implement this once udev 0.060 gets into Breezy.
--
Thomas Hood
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Can you compare this behaviour against NFS? In any case, the CIFS file-
system is the better option to 2000/XP servers. smbfs is simply older
code.
With NFS the same problem occurs. In /var/log/messages the following error
shows up:
kernel: nfs: server 192.168.0.201 not responding, still
device-mapper also has configure-time options which can be used
to control this:
--with-device-uid=UID Set the owner used for new device nodes [UID=0]
--with-device-gid=UID Set the group used for new device nodes [GID=0]
--with-device-mode=MODE Set the mode used for new device nodes
On Sat, Jul 02, 2005 at 11:26:27AM +0200, Vincent Bernat wrote:
hibernate 1.09 is out. Please, package it.
Done. Packages will hit the official Debian archive in a while; until
then you can fetch the packages from my repository -
deb http://cp.yi.org/apt/hibernate ./
Cheers,
Cameron.
reassign 316615 netbase
thanks
On Tue, 2005-07-05 at 11:21 +0200, Raoul Verveer wrote:
3) the if-else construction in the stop part of the script, regarding
verbosity, doesn't seem to work (while the sh syntax looks ok to me btw).
What script, exactly ?
The /etc/init.d/networking
On Tue, Jun 21, 2005 at 09:53:10PM +0200, Marc Haber wrote:
question. It is now quite unclear to me what the practical difference
between these two is.
You are talking about these two questions, right?
Right.
|Your mail name is the hostname portion of the address to be shown on
On Sun, Jul 03, 2005 at 11:43:24PM +0200, Marc Haber wrote:
On Mon, Jun 20, 2005 at 12:49:06PM -0500, John Goerzen wrote:
According to the exim4 docs I have, if one has a single file that has
both a SSL certificate and a SSL private key, that file must be listed
in tls_certificate and
1 - 100 of 313 matches
Mail list logo
