I have also experienced this problem on 2.6.18 through 2.6.22 (amd64). I
have an internal SATA drive with my Debian installation on it and an
external eSATA drive with documents and such. The eSATA drive was
incorrectly chosen as /dev/sda on approximately 75% of boots, which
resulted in the kernel
wengophone package looks like if it was a snapshot of the open wengo
trunk. During last two months, it kept craching for several reasons.
However, the versions downloaded from www.wengophone.org (a .tar.bz2
package) works well with debian distributions (etch, sid,...). The
latest one was based
On Mon, Aug 27, 2007 at 02:12:40AM +0200, Vincent Lefevre wrote:
Package: ntp
Version: 1:4.2.4p3+dfsg-1
Severity: normal
After I did an upgrade on 2007-08-17 (including to ntp 1:4.2.4p3+dfsg-1,
as said by /var/log/dpkg.log), I rebooted my machine with the Ethernet
cable unplugged. I
Thank you,
I will have your patch verified and incorporate it.
It is probably about time to fork of cryptcat, I think. Any name
suggestions?
Kind regards,
Lars Bahner
On Fri, Aug 10, 2007 at 06:22:59PM +0200, niek linnenbank wrote:
Good day,
I think I found the problem of this bug. There
Hi Arturas,
You reported a bug on the workrave package a while ago:
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=262713
I would like to forward it to the workrave developers, but I'm not sure
exactly what you mean.
Could you perhaps take a screenshot of your setup which would show the
Hi Jeroen,
Are you still running into the workrave bug you described on
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=349989
when using ion3 and the latest version of workrave (1.8.4) ?
Cheers,
Francois
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe.
Package: adduser
Version: 3.104
Severity: wishlist
If you add yourself to a group, it doesn't take effect until you log out and
log back in. adduser should warn about that since it is such a common problem
and so many people get bitten by this at some point.
Francois
-- System Information:
tags 435796 upstream
thanks
also sprach Bill Y [EMAIL PROTECTED] [2007.08.27.0008 +0200]:
Can you mail me that patch?
It's attached. And since I (again) managed to forget to attach it to
the bug report, I am also sending it there. :)
Note that's it's a debdiff, meaning you might want to edit
Package: cdbs
Version: 0.4.49
Severity: minor
The docs state:
Nevertheless, if you still want this feature, set the following variables:
* DEB_AUTO_UPDATE_AUTOCONF
* DEB_AUTO_UPDATE_AUTOMAKE
* DEB_AUTO_UPDATE_LIBTOOL
What is missing is a description of *what* value to give these
Bastian Blank [EMAIL PROTECTED]:
No, it is usualy not the same. The Cisco client defaults to NAT
traversal.
The client machine is a laptop with Ubuntu Feisty, which has vpnc
0.4.0.
vpnc -h gives me the following information on nat-t:
...
--natt-mode natt/none/force-natt/cisco-udp
NAT
Package: grep
Version: 2.5.3~dfsg-1
Severity: normal
The current version of grep behaves differentls when parsing null terminated
data. To reproduce this I created the following directory structure:
.
./1
./dir2
./dir1
./dir1/1
./dir1/2
./pattern
pattern contains:
^.$
^./1$
^./dir1
find -depth
Bernard, could you give the CVS version a try and test if this issue is
fixed for you?
Hi, yes I can do that. Could you provide instructions how to retrieve the
CVS version please? I assume it will include an up to date CHANGES file?
Thanks for looking at this.
Cheers,
-bernie.
--
To
2007/8/27, A. Costa [EMAIL PROTECTED]:
Of course, after you closed the bug today, I checked the BTS log and
caught up.
Ups... sorry.
I've just tested 'scantv' again, this time using v3.95.dfsg.1-4, and
the bug still exists as described last June. I reran the:
Seems like it crash in
[EMAIL PROTECTED] wrote:
Bernard, could you give the CVS version a try and test if this issue is
fixed for you?
Hi, yes I can do that. Could you provide instructions how to retrieve the
CVS version please? I assume it will include an up to date CHANGES file?
dtach is hosted at sf
GNU Anubis is an intermediate layer between a mail user agent (MUA)
and a mail
.../...
Is it OK in this form?
Seems fine by me. Please note that I'm not a native speaker of English
so I may miss other problems. Theoretically, reviewing packages
descriptions should be done by
Package: amule
Version: 2.1.3-4
Severity: normal
Somebody on in *mule land thinks my amule client is misbehaving. I
received this message in my Messages window:
*** Chat-Session Started: gkacep (193.231.172.6:4662) - 2007-08-27
13:11:09
[13:11:09] *** Connected to Client ***
[13:11:09]
Package: axyl-lucene
Version: N/A
Severity: wishlist
Tags: patch l10n
Please find attached the french debconf templates update, proofread by the
debian-l10n-french mailing list contributors.
If you do not already use it, you might consider using the
podebconf-report-po utility, which helps
Package: apt
Version: 0.7.3
The man page and the apt help in lenny describe the purge command,
but apt-get purge returns an invalid operation error when
run. apt-get --purge remove and dpkg --purge work as expected.
Cheers,
Allwyn.
[EMAIL PROTECTED]:~# apt-get install apt
Reading package
On Fri, Aug 24, 2007 at 07:16:53AM +0300, Faidon Liambotis wrote:
I've been hit by this bug as well and I'd like to see a solution.
I haven't tested Martin's patch yet but he seems to know what he is doing.
I've been using it on several machines since I sent the patch, and it has
been working
Package: nbd
Version: N/A
Severity: wishlist
Tags: patch l10n
Please find attached the french debconf templates update, proofread by the
debian-l10n-french mailing list contributors.
If you do not already use it, you might consider using the
podebconf-report-po utility, which helps warning
Package: ayttm
Severity: wishlist
Hi,
First thanks for maintaining this!
Second just a reminder that the 0.5.0-6 version is out, would be nice to
have it packaged for Debian :)
Feel free to contact me if you need a sponsor and/or comaintainer for this.
regards,
-- System Information:
Debian
On 2007-08-27 08:52:15 +0200, Kurt Roeckx wrote:
The reason is that dns didn't work, so it never added those. I think
I've seen an upstream report about it.
I've looked at upstream bug reports. I'm not sure I understand, but
shouldn't ntpd be compiled with FORCE_DNSRETRY defined? See
Hi,
Eric Valette wrote:
Unfortunately this does not
fix my problem allthough have a system that support the feature (see below)
I figured it out with Eric, and the patch actually fixes the problem.
What remains for him is a wrong sdb detection on his machine by the
kernel (which is another
I'm here because both 'tiger' and 'chkrootkit' are reporting potential
problems. From tiger:
# Checking installed files against packages...
--WARN-- [lin001w] File `/lib/init/rw/.mdadm/md3-uevent' does not belong
to
On 8/27/07, Ricardo Mones [EMAIL PROTECTED] wrote:
Hi,
First thanks for maintaining this!
Second just a reminder that the 0.5.0-6 version is out, would be nice to
have it packaged for Debian :)
Feel free to contact me if you need a sponsor and/or comaintainer for this.
Hi,
Actually,
On Sun, Aug 26, 2007 at 05:45:46PM -0700, Mark Hedges wrote:
Maybe pod2man should translate straight quotes in indented blocks
to \(aq and \(dq.
Makes sense to me.
Regards,
--
Colin Watson [EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL
Package: dh-make
Version: 0.43
Severity: minor
Tags: patch
typo in /usr/share/debhelper/dh_make/debianm/rules:
--- rules.orig 2007-08-27 17:17:32.0 +0900
+++ rules 2007-08-27 17:17:41.0 +0900
@@ -48,7 +48,7 @@
clean:
dh_testdir
dh_testroot
- rm -f
Package: lvm2
Version: 2.02.26-1+b1
Severity: normal
Tags: patch
Fix LP #113515
the filter line in lvm.conf needs to be respected on a vgchange run.
--- lvm2-2.02.26/debian/initramfs-tools/hooks/lvm2.orig 2007-08-27
09:45:15.0 +0200
+++ lvm2-2.02.26/debian/initramfs-tools/hooks/lvm2
* Goswin von Brederlow [EMAIL PROTECTED] [070824 13:27]:
I'm mirroring etch (normal etch) and etch-security (security updates
for etch) into one archive. Now I have a problem with conflicting
md5sums between etch and etch-security:
[...]
As you can see the problem is that a different source
Package: adduser
Version: 3.104
When installing puppet (which does this):
/usr/sbin/adduser --system \
--group \
--home /var/lib/puppet \
--gecos Puppet configuration manangement daemon \
puppet /dev/null
I saw:
Use of
Package: puppet
Version: 0.23.2-3
First of all, many thanks for packaging puppet!
On an upgrade from 0.23.1-1 to 0.23.2-3, I received this warning:
Use of uninitialized value in printf at /usr/sbin/adduser line 188.
It looks like the adduser command is failing:
sudo /usr/sbin/adduser
Mike Hommey [EMAIL PROTECTED] wrote:
Hi,
I bet you only entered the domainname, without the http:// part.
Indeed, you're right. GdkLauncher accepts the URL without the protocol
part so I thought QtLauncher would too. To be honest I expect the
backend to handle that and not the frontend, so I
Package: wnpp
Severity: wishlist
* Package name: jahshaka
Version : 2.0rc4
Upstream Authors: Jah Shaka [EMAIL PROTECTED]
* URL : http://www.jahshaka.org/
* License : GNU GPL 2
Description : Video editing and effects system
This is hardware accelerated
reassign 423722 libotr
thanks
On 25/08/07 at 22:00 +0200, Lucas Nussbaum wrote:
Version: 3.0.0+cvs20070508-1
On 24/08/07 at 22:49 +0200, Thibaut VARENE wrote:
I'm getting tired of receiving this mail. This bug has been closed
ages ago.
No, that's a BTS versioning messup. The fact that
Mike Hommey [EMAIL PROTECTED] wrote:
Hi,
You have to enter full urls (including the protocol) if you want GdkLauncher
to work properly.
Hmm, doesn't help. I'll take a look at the HTML source later today or
tomorrow.
JB.
--
Julien BLACHE [EMAIL PROTECTED] | Debian, because code matters
Package: debconf
Version: 1.5.14
(Mostly cloned from #425397 at the request of Joey Hess. I've been
running puppet in the d-i/late-command part of the install to get these
problems, if it helps I'll try and trim it down (I suspect a preseeded
postfix install might be sufficient))
I'm using
Cyril Brulebois [EMAIL PROTECTED] writes:
Shipped with libpcap0.7-dev, not in libpcap0.8-dev. Probably
triggered by #337973 being fixed since the beginning of august. An
explicit B-D on libpcap0.7-dev would fix this until libpcap0.8-dev
includes the missing file, or until upstream adapts its
tags 439560 fixed-upstream
thanks
Hello Nicolas,
Please find attached a patch which fixes various formatting typos
introduced in the last updates.
Thanks for your extremely thorough patch! I've applied almost all of it for
upstream 2.65. One piece looks to be
incorrect; see below.
diff
Package: libgnomeprint2.2-0
Version: 2.18.1-1
Followup-For: Bug #431725
I'm using lprng (configuration not changed since ages), printing from KDE apps
and command-line works, gnome-control-center Printers brings up the KDE
printer managing which looks fine. However, since some time (maybe since
Package: xorg-server
Severity: wishlist
The Kdrive-based Xfbdev server is useful on embedded systems like the
Sharp Zaurus. Since it is built anyway, I see no reason not to include
it in the distribution.
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy:
Subject: In testing version there is no /usr/bin/wmfishtime executable.
Package: wmfishtime
Version: 1:1.24-6
Severity: grave
Justification: renders package unusable
*** Please type your report below this line ***
Package wmfishtime_1.24-6_i386.deb contains no /usr/bin/...
Bye,
gc.
-- System
Aug 20 - Aug 24: With every purchase of our Physician Contact List comes
without charge a Directory for Dentists, Nursing Homes and Hospitals
Licensed Physicians in the USA
788,444 in total 17,400 emails
Physician in over 34 specialties
Many unique fields like 'medical school attended'
On Sun, Aug 26, 2007 at 14:50:11 -0400 (-0400), Joey Hess wrote:
The oroginal bug report about the hang has been fixed and closed.
Could you please open a new bug report for this other problem, and go
into detail about how it can be reproduced? (Something to do with
running puppet inside d-i?)
Anton Zinoviev wrote:
I am forwarding this bug to the upstream.
Thanks. Excuse me for the late answer, I was away from keyboard for more
than two weeks.
In my opinion the small letter I is not a problem - this is the usual
italic shape for this letter and it can not be confused with any
Package: xorg
Version: 1:7.2-5
Severity: normal
After updating my system (current Debian testing) I noticed that my monitor
goes directly into energy saving mode after X started up when booting the
system.
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy:
Hi
Made it should be removed from the options page ?
Alex
On Mon, Aug 27, 2007 at 05:30:05AM +, Debian Bug Tracking System wrote:
This is an automatic notification regarding your Bug report
#438686: azureus: Azureus not honouring mtu setting in options,
which was filed against the
Hi Bruno,
I'm not so sure of the details here, but maybe you are, since it relates to
iconv stuff. Can you confirm/disconfirm the
correctness of this part of the patch below:
-values are listed by the \fBiconv \-\-list\fP command, and all combinations
+values are listed by the \fBiconv
Package: libpango1.0-0
Version: 1.16.5-1
Severity: normal
After upgrading my system, the latest Pango renders U+200B (zero-width
space) visibly under certain conditions, as a missing glyph box
containing the hex value. Particularly, Pango seems to be a looking
for a glyph for this character
On Mon, Aug 27, 2007 at 11:03:47 +0200, Ronny Standtke wrote:
Package: xorg
Version: 1:7.2-5
Severity: normal
After updating my system (current Debian testing) I noticed that my monitor
goes directly into energy saving mode after X started up when booting the
system.
You need to give
Hello,
Thanks for all the information you provided, you've been very helpful.
On an unrelated matter, it saddens me that you decide to not use our
packages. Can you pinpoint us on the fixes that Danish CID wants (a bug
report on bugs.digium.com would be the best).
We have patched Asterisk for
Hi,
Please try again with latest xserver-xorg-video-ati in experimental
(6.7.192 has been uploaded today). You might have to update your
xorg.conf since xinerama is now replaced by randr-1.2 (see
http://bgoglin.livejournal.com/9846.html for some help).
Thanks,
Brice
--
To UNSUBSCRIBE, email
On Mon, Aug 27, 2007 at 08:18:36AM +1000, Robert Collins wrote:
I have not yet checked either. You don't have to stick with the old and
buggy version, you could definately supply a patch to fix this rather
A patch for an update to a new upstream version
than getting all tetchy.
I
On 25/08/2007 Markus Melms wrote:
Package: cryptsetup
Version: 1.0.4+svn26-1 0
When using luksOpen with a wrong passphrase, there are no more chances
to try again. It does not matter wether --tries is set or not:
playstation:/mnt# cryptsetup luksOpen /dev/hda1 hda1
Enter LUKS passphrase:
Am Sonntag, den 26.08.2007, 20:27 -0500 schrieb Dirk Eddelbuettel:
There's a config option to turn it off. That was discussed on the ompi lists
a while back.
I think you refer to [1]?
Another option is to just rebuild and comment that activation out. I did that
with the 1.1* series... and I
Hi Branden,
The randr-1.2 ati driver is now in experimental (6.7.192 uploaded
today), it contains a major rework of the driver. Could you test whether
your problem still occurs?
Thanks,
Brice
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL
clone 1708 -1
reassign -1 shadow
thanks
This problem is not only a PAM problem. Even after patching PAM to not
block SIGINT, the signal is still being ignored because passwd/su/login each
also block the signal on their own.
So fixing this would require changes to both pam and shadow.
--
Steve
Hello Dan, and thank you very much for your reports.
On Sunday, August 12, 2007 at 19:42:05 +0800, Dan Jacobson wrote:
Upon encountering postpone this message?, the user worries if n
will 1. throw away the message, or 2. go ahead and send the message,
or 3. let him continue to edit the
Package: libmtp5
Version: 0.1.5-2
Severity: important
hello,
when i put my sansa e250 in mass storage mode, it's still somehow
influenced by rules in libmtp.rules - block devices are not created.
I managed to solve? this problem by adding line
DRIVER==usb-storage, GOTO=libmtp_rules_end
just
Hi Xav,
Could you try with xserver-xorg-core and xserver-xorg-video-ati from
experimental (1.3.99.0 and 6.7.192)?
thanks,
Brice
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Package: espeak
Version: 1.26
Severity: wishlist
Espeak is now up to version 1.28. I would like to see this version in Debian.
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.6.22-1-k7 (SMP w/1
On Sun, 2007-08-26 at 20:27 -0500, Dirk Eddelbuettel wrote:
There's a config option to turn it off. That was discussed on the ompi lists
a while back.
I would vote against turning it off during compile time - the package
should be as universally usable as possible, IMO.
The option to turn the
Hi Markus,
ATI driver 6.7.192 has been uploaded to experimental today, it contains
some fixes that Alex talked about earlier. Please report back whether it
helps, and whether Alex' xrandr command lines help.
Thanks,
Brice
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of
Package: xpdf-reader
Version: 3.02-1.1
Followup-For: Bug #417820
Hi,
I also get a segfault with Rogério's file. Here is the backtrace from gdb:
**
Starting program: /usr/bin/xpdf.bin motherboard_memory_ga-8i865gme-775.pdf
Package: libmtp5
Version: 0.1.5-2
Severity: important
hello,
when i put my sansa e250 in mass storage mode, it's still somehow
influenced by rules in libmtp.rules - block devices are not created.
I managed to solve? this problem by adding line
DRIVER==usb-storage, GOTO=libmtp_rules_end
just
* Frank Lichtenheld [EMAIL PROTECTED] [2007-07-06 15:41]:
Happened while trying to build a current linux-2.6 from Linus' tree:
Can you still reproduce this bug? I cannot with gcc-snapshot
20070720-1 (the latest on hppa).
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email
tags 367834 moreinfo
thanks
Zilvinas,
On Thu, May 18, 2006 at 03:44:34PM +0300, Zilvinas Valinskas wrote:
Problem appears on line 245. Because check_user is run as non-root user it is
denied access to /etc/shadow file naturally. 'spent == NULL'. Then there is a
check if selinux is enalbed
Package: epiphany-extensions
Version: 2.18.1-2
Severity: normal
Ads blocked when viewing a page over http:// are not blocked when
viewing the same page over https:// and there appears to be no way to
tweak the rule to block https:// adverts.
e.g. with this rule:
$ cat
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512
Package: wzdftpd
Version: 0.8.1-2
Severity: Minor
hi,
i just found a few typos in the current stable debian tree wzd.cfg for
version 0.8.1-2
please see attached a diff which fix this typos:
- --- /etc/wzdftpd/wzd.cfg2007-08-27
Package: vala
Version: 0.1.2-1
Severity: wishlist
Hi,
please package the vapigen binary. It can be enabled with
--enable-vapigen
See http://live.gnome.org/Vala/Bindings for more information.
Bye
signature.asc
Description: Dies ist ein digital signierter Nachrichtenteil
Hi,
CJ van den Berg [EMAIL PROTECTED] writes:
Having said that though, there is one way to avoid this overhead. You can
use the autoload feature to make pulseaudio only load the -sink/-source
modules when a client requests them and unload them again when the last
client disconnects. This
# ASA-2007-016, CVE-2007-3764
close 376767 1:1.2.13~dfsg-2etch1
# ASA-2007-011, CVE-2007-1594, CVE-2007-2297
close 419820 1:1.2.13~dfsg-2etch1
found 419820 1:1.0.7.dfsg.1-2
fixed 419820 1:1.0.7.dfsg.1-2sarge5
# CVE-2007-1306
close 419370 1:1.2.13~dfsg-2etch1
thanks
All of the known Asterisk
Nicolas,
For man.7, according to the groff changelog:
2000-10-26 Werner LEMBERG [EMAIL PROTECTED]
Convert macros `tmac.XXX' to `XXX.tmac'. Special cases:
[...]
--- ../orig/manpages-2.62/man7/man.7 2007-08-25 16:49:56.0 +0200
+++ ./manpages-2.62/man7/man.7
On Sun, Aug 26, 2007 at 01:05:06AM -0700, Cameron Dale wrote:
On 8/26/07, Debian Bug Tracking System [EMAIL PROTECTED] wrote:
Please read /usr/share/doc/exim4-config/NEWS.Debian.gz for 4.67-2 and
4.67-4:
|update-exim4.conf looks for commented UPEX4CmacrosUPEX4C (which
|used to
Package: mutt
Version: 1.5.16-3
Severity: grave
Justification: renders package unusable
After upgrading to the new version of libgnutls13 in unstable, mutt
fails to connect to my imaps server with tls_socket_read ((unknown
error code)).
Downgrading to libgnutls13 1.6.3-1 fixes it.
Apparently mutt
Hi,
I can confirm that bug report. Crm114 version is 20070810-1, the
depends have version:
libc62.6.1-1+b1
libtre4 0.7.5-1
metamail 2.7-53
I cannot learn anything to the crm114 db, the error looks that way
...and obviously also the gidlgen binary :)
signature.asc
Description: Dies ist ein digital signierter Nachrichtenteil
News to 207657
Never feel insecure again around the ladies
cerina Pedaci
http://www.platchat.info/
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Mail to 49942
We have the answer for you mr little cock!
Jessie Levine
http://www.pilipuig.info/
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
On Mon, Aug 27, 2007 at 01:11:29PM +0300, Timo Lindfors wrote:
so is this use alsa for output and keep the device open somehow
implicit even if the configuration file does not mention alsa? If I
comment out
load-module module-detect
then the alsa devices won't get opened so maybe this
On Sat, Aug 04, 2007 at 02:38:10AM +0200, Inna Rempel wrote:
Package: dash
Version: 0.5.4-1ubuntu2
Severity: important
File: /bin/dash
*** Please describe what you were doing when the application crashed ***
(no debugging symbols found)
Using host libthread_db library
retitle 430632 ttyrec doesn't work if CONFIG_LEGACY_PTYS is unset (PowerPC
2.6.22 kernels)
thanks
as CONFIG_LEGACY_PTYS is no longer defined in official Debian x86
kernels (at least with 2.6.22), so that ttyrec no longer works on
such machines either.
--
Vincent Lefèvre [EMAIL PROTECTED] -
Package: cuetools
Version: 1.3.1-1
Severity: normal
I have no idea how cuetools is supposed to work but none of the
examples from the man page work:
1793:[EMAIL PROTECTED]: ~] cueprint -d '%N\n' album.cue
run `cueprint --help' for usage
zsh: exit 1 cueprint -d '%N\n' album.cue
1794:[EMAIL
Package: nagiosgrapher
Tags: patch
Hi,
the graphs.cgi shipped by nagiosgrapher always shows the first service
graph when a host has multiple service graphs. This can be fixed with
the attached patch from Horst Krause.
Regards,
Daniel
--
Address:Daniel Baumann, Burgunderstrasse 3,
Package: kdelibs4c2a
Version: 4:3.5.7.dfsg.1-6
Severity: normal
The relationships between kdelibs4c2a and kdelibs4-dev are somewhat
mysterious:
kdelibs4-dev Depends: kdelibs4c2a (= 4:3.5.7.dfsg.1-6),
Conflicts: kdelibs4c2a ( 4:3.5.7.dfsg.1-6)
kdelibs4c2a Conflicts: kdelibs4-dev (
Package: libsane
Version: 1.0.19~cvs20070730-1
Severity: important
Hello,
After updating my Debian-testing machine kernel 2.6.21, I have problems
using my Canoscan LiDE20 scanner with xsane. The scanner worked
perfectly under kernel 2.6.18, and currently I'm forced to use it
with Debian
On Mon, Aug 27, 2007 at 10:58:30AM +0200, Vincent Lefevre wrote:
Any one knows why official PowerPC kernels are configured with
CONFIG_LEGACY_PTYS unset? This makes programs using some pty's
fail to work. See bug 430632 for instance.
ttyrec supports the usage of openpty, but with two problems:
Package: pyicqt
Severity: grave
Justification: renders package unusable
The errormessage given by pyicqt is not very helpfull. It
complains about missing/wrong twisted.
Installing python-pyopenssl helps.
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (990,
* Martin Michlmayr [EMAIL PROTECTED] [2007-08-27 12:41]:
Architecture: i386 (i686)
I lied. This was on a powerpc box. The program works fine on an i386
box. It seems command line argument passing in cuetools is broken on
powerpc.
--
Martin Michlmayr
http://www.cyrius.com/
--
To
Package: kdm
Version: 4:3.5.7-2
Severity: minor
I found some crap in the default KDMRC file. Is that a bug or a feature?
Line 528: ...login.crap.com...
:)
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (1000, 'testing'), (500, 'stable'), (101, 'unstable')
Package: traceroute
Version: 2.0.8~rc1-1
Severity: normal
Hi,
the postinst script installs an alternative for traceroute6, but
/usr/bin/traceroute6.db is not shipped in the package.
I assume the WRAPPER list in debian/rules is just incomplete.
-- System Information:
Debian Release: lenny/sid
On Mon, Aug 27, 2007 at 13:01:18 +0200, Marcus Better wrote:
But perhaps my xrandr version is too old. WIll 1.2.2 it be available in the
archive anytime soon?
Hi Marcus,
it's in x11-xserver-utils in experimental.
Cheers,
Julien
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a
You need to give us a *lot* more information if you want anything to
happen with this report. For a start, run
'/usr/share/bug/xserver-xorg-core/script 31' and send the output to
the bug address.
Thanks for the info, I did not know that this script even exists. Please bear
with me, I am not
JT == Juhapekka Tolvanen [EMAIL PROTECTED] writes:
JT Package: crm114
JT Version: 20070810-1
JT If I try to teach my spam and ham to crm-114, I get these errors
JT every time:
JT % crm114-learnspam.sh
JT
Hello Michael,
On Mon, Aug 27, 2007 at 10:48:15AM +0200, [EMAIL PROTECTED] wrote:
--- ../orig/manpages-2.62/man7/tcp.72007-06-23 09:56:56.0
+0200
+++ ./manpages-2.62/man7/tcp.7 2007-08-25 17:37:02.0 +0200
@@ -233,7 +233,7 @@
fairness under large windows
Am Montag, den 27.08.2007, 00:28 +0200 schrieb Sven Arvidsson:
On Sun, 2007-08-26 at 13:58 +0200, Matthias Bläsing wrote:
I'm running a dual-head setup with the x.org-ati driver (radeon/r300)
and totem messes with the xrandr settings.
1. I noticed this behaviour first when running a
On Mon, Aug 27, 2007 at 13:18:43 +0200, Ronny Standtke wrote:
By the way, how do I send the output of this script into a normal file?
/usr/share/bug/xserver-xorg-core/script 3 some_file
Cheers,
Julien
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble?
Am Montag, den 27.08.2007, 11:50 +0200 schrieb Tilman Koschnick:
The option to turn the warning off during runtime is:
$ mpiexec --mca btl ^openib ...
This can easily be set as an alias so one doesn't have to type it again
and again:
$ alias mpiexec='mpiexec --mca btl ^openib'
This
MF == Marcus Fritzsch [EMAIL PROTECTED] writes:
MF Hi, I can confirm that bug report.
[...]
MF I cannot learn anything to the crm114 db, the error looks that
MF way here:
MF --- /usr/bin/crm: *ERROR* This file
MF should have learncounts, but
Package: ntlmaps
Version: 0.9.9.0.1-4
Severity: serious
Justification: Policy 12.1
*** Please type your report below this line ***
-- System Information:
Debian Release: 4.0
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel:
Package: iputils-ping
Version: 3:20070202-2
Severity: normal
When I ping a server (ping ums.usu.ru), the following traffic occurs:
17:27:32.622426 IP 212.220.194.198.32946 195.38.32.2.53: 49402+ A?
ums.usu.ru. (28)
17:27:32.651512 IP 195.38.32.2.53 212.220.194.198.32946: 49402 1/3/1
A
1 - 100 of 357 matches
Mail list logo