Not fixed:
Setting up spambayes (1.0.4-4) ...
Compiling /usr/lib/python2.5/site-packages/spambayes/Corpus.py ...
File /usr/lib/python2.5/site-packages/spambayes/Corpus.py, line 82
from __future__ import generators
SyntaxError: from __future__ imports must occur at the beginning of the file
Package: tau
Version: 2.16.4-1.1
Severity: serious
There was an error while trying to autobuild your package:
Automatic build of tau_2.16.4-1.1 on lebrun by sbuild/sparc 98
Build started at 20080418-0252
[...]
** Using build dependencies supplied by package:
Build-Depends: debhelper
Package: jtex-bin
Version: 1.9.1-9.1
Severity: normal
Hi,
I noticed today that texfam-1.4 was released in october 2006.
Please consider to update jtex.
Thanks for your maintenance.
Regards.
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (500, 'unstable'),
Hi Alex,
while writing a reply and interpreting the log output you've provided, I
stumbled across the bug. The function which is responsible for
formatting the chip name does so depending on the type of the chip. The
returned status variable is only set in one out of three branches,
though :/ A
Package: bacula-fd
Severity: normal
Bacula-fd is built without PKI support. Trying to start bacula-fd with
PKI enabled in the configuration file gives the following error message:
Restarting Bacula File daemon: 17-Apr 23:36 persephone-fd JobId 0: Fatal
error: PKI encryption/signing enabled but
On Thu, April 17, 2008 11:20 pm, Julien Cristau wrote:
On Fri, Apr 18, 2008 at 00:52:57 +0200, Frank Lanitz wrote:
After starting the XServer with this module, there is not chance to go
back to noramle console (tty1-tty6) on the monitor. System is not
freezing, since it seems to be possible
hi teodor,
hrm.. yes it's probably something wrong with the depends/conflicts/replaces
transitional logic. i'll look at it this weekend and get a fixed version
uploaded.
thanks,
sean
On Thursday 17 April 2008 10:29:38 am Teodor wrote:
Package: cacti-cactid
Version: 0.8.7a-1
Package: gkrellm
Version: 2.3.1-1
Severity: normal
Tags: patch
Having just downloaded and compiled 2.6.24 for Debian, I note in
the kernel configurator that the proc entries /proc/acpi/battery and
/proc/acpi/ac_adapter are deprecated, and that all future power/battery
stuff should go
Hello Luk,
I'd like to help out with bash-completion. It is widely used in Ubuntu
too, and there are some patches which can be easily merged. I can look
at outstanding bug reports and eventually submit a new revision to be
reviewed. Please, let me know. Thank you!
--
To UNSUBSCRIBE, email
Package: gajim
Version: 0.11.4-2
Severity: normal
After recent updates in testing (either gtk libs or phyton libs have been
updated) I have noticed that gajim does not show its icon in the tray anymore.
This has been confirmed with IceWM and FluxBox. A simple rebuild from source
solved this
close 476599 5.10.0-1
thanks
On Thu, Apr 17, 2008 at 11:24:57PM +0300, Niko Tyni wrote:
I can reproduce the crash with just
#!/usr/bin/perl
use threads;
use re 'eval';
my $a = qr{(??{a})};
print match\n if bc =~ /(??{b})/;
my $thr = threads-create(sub { });
$thr-join();
As a workaround you could apply the patch posted on NVidia's Linux
forum:
http://www.nvnews.net/vbulletin/showthread.php?t=110088
The patch command looks a little bit different for us, though.
For the legacy-96xx sources, for example:
cd /usr/src
tar xpfz
Hello,
is there any progress on fixing this issue? Right now I cannot use
boost::serialization to build a new encfs release; linker doesn't find
many symbols.
Regards,
Eduard.
--
formorer 1762 OD 23.04.06 [EMAIL PROTECTED] ( 0) Party Veröffentlichung von
[EMAIL PROTECTED] erfordert
retitle 461992 ITA: john -- active password cracking tool
owner 461992 !
thanks
Hi,
I intend to adopt john, I'll package it ASAP.
Thanks,
David
--
. ''`. Debian maintainer | http://wiki.debian.org/DavidPaleino
: :' : Linuxer #334216 --|-- http://www.hanskalabs.net/
`. `'` GPG: 1392B174
Package: gkrellm
Version: 2.3.1-1
Followup-For: Bug #476641
Naturally, I found a small bug in my patch right after I sent it
out. Updated patch attached.
Schwab
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy:
retitle 406133 ITA: transcriber -- transcribe speech data using an integrated
editor
owner 406133 !
thanks
Hi,
I intend to adopt transcriber, I'll package it ASAP.
Thanks,
David
--
. ''`. Debian maintainer | http://wiki.debian.org/DavidPaleino
: :' : Linuxer #334216 --|--
Package: gkrellm
Version: 2.3.1-1
Followup-For: Bug #476641
Neglected to consider that .reportbugrc would cache my old email
address, which stopped working about a month ago. So if email to me is
bouncing, that's why.
Use the email address associated with this message; it's
retitle 476131 ITA: netkit-ftp-ssl -- FTP client with SSL encryption support
retitle 476132 ITA: linux-ftpd-ssl -- FTP server with SSL encryption support
owner 476131 !
owner 476132 !
thanks
I'll take these packages, if there are no objections.
I'm already maintaining netkit-telnet-ssl, so this
tags 442667 + patch
thanks
Hi,
Attached is the diff for my maloc 0.2-2.1 NMU.
diff -u maloc-0.2/debian/changelog maloc-0.2/debian/changelog
--- maloc-0.2/debian/changelog
+++ maloc-0.2/debian/changelog
@@ -1,3 +1,17 @@
+maloc (0.2-2.1) unstable; urgency=low
+
+ * Non-maintainer upload.
+ *
Package: ffmpeg
Severity: wishlist
Version: 0.svn20080206-1
Hi,
according to
http://blogs.sun.com/openmediacommons/entry/oms_video_a_project_of
and other resources, SUN develops a new codec called OMS, which is a
royalty-free codec loosely based on the h.26x codec family. In the
FAQ the
Package: gcc-4.2
Version: 4.2.3-3
Severity: normal
See the following code:
#include stdio.h
int main (void){
puts (Hallo Welt);
return 0;
}
compiling with gcc-4.2 (in 64-bit mode gives no error and just runs)
hello% gcc-4.2 hello.c
[EMAIL PROTECTED]:~/programming/C/hello% ./a.out
Hallo
Package: nvidia-kernel-legacy-96xx-source
Version: 96.43.05-1
Severity: minor
AFAICS the postinst and postrm scripts in the nvidia kernel module
sources use update-modules. This triggers a warning message at
install time of the generated nvidia module saying
reopen 468143
found 468143 4.3.2-1
tags 468143 + patch pending fixed-upstream
thanks
Hi,
On Fri, Apr 18, 2008 at 08:22:07AM +0200, Florian Forster wrote:
while writing a reply and interpreting the log output you've provided, I
stumbled across the bug. The function which is responsible for
Hi,
Vincent Smeets wrote:
I have found out that the package libgcj-bc (4.3.0-1) exists in
or in unstable. (4.3.0-4). That's where the openoffice.org packages were
built.
that version never made it into testing/lenny.
Indeed.
Can a package migrate to testing without all the dependency
Package: debian-edu
Severity: wishlist
Tags: patch
Dear Debian-Edu developers,
we consider several packages very important to teach software development
in schools. So I would love to see a meta package education-develop
that contains the package dependencies as they are defined in the
attached
Marc Haber wrote:
The most we're gonna do is patch exiwhat to give a more verbose
message along the lines exiwhat can only work if the psmisc package
is installed.
I think that's acceptable compromise. Thanks.
Marcin
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of
Hmm but killall.sh doesn't use pidof... Well I'm not sure if my problem is
clear, but correct me if I'm wrong.
Anyway, to clarify: killall.sh works perfectly, but people should not use it
with an argument; specially not with dhclient as argument. Using an
argument with killall.sh is stated in the
Am Freitag, 18. April 2008 02:14:46 schrieb Kevin Ryde:
It'd be nice if sigint meant die immediately, without waiting or
timing-out on network responses
This is a known issue, and on the upstream todo list. Note that Python threads
and signals do not play along: you cannot interrupt a threaded
Package: linux-image-2.6.24-1-686
Version: 2.6.24-5
--- Please enter the report below this line. ---
Dear DDs,
I was wondering if the kernel and alsa developers are aware of this
problem—as Paul Wise stated [1], they are not allowed to distribute this
firmware—and if not, if there should be
I've been told that this range feature is documented in an expired
draft RFC, available from
URL:http://www.tkk.fi/cc/docs/kerberos/draft-kashi-incremental-00.txt.
It can be used to understand how the feature is working. It claim
that it is possible to see in supportedControls if this range
Package: ocaml
Version: 3.10.1-1
Severity: normal
Hello,
The section of generated documentation, should be Programming and not
Applications/Programming.
Sylvain Le Gall
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
I could now test exim4 -d -bd with the Exchange box. As you can see, it
does STARTTLS.
21172 Listening...
21273 SMTP EHLO XXX
21273 sender_fullhost = XXX [XXX]
21273 sender_rcvhost = XXX ([XXX])
21273 set_process_info: 21273 handling incoming connection from XXX [XXX]
21273 host in
Citando Debian Bug Tracking System [EMAIL PROTECTED]:
This is an automatic notification regarding your Bug report
which was filed against the wine package:
#475837: wine: Unable to apt-build.
It has been closed by Ove Kaaven [EMAIL PROTECTED].
Their explanation is attached below along with
Hello,
I updated the 05_overflow.diff patch (please review the file
attached).
I have uploaded the new package for experimental at:
http://mentors.debian.net/debian/pool/main/a/acon/acon_1.0.5-7.dsc
--
أحمد المحمودي (Ahmed El-Mahmoudy)
Digital design engineer
SySDSoft, Inc.
GPG
Thanks for this bug report, this will be addressed shortly.
Thomas
Falk Hackenberger wrote:
Package: dkimproxy
Version: 1.0.1-1
Severity: serious
Tags: security
X-Debbugs-CC: [EMAIL PROTECTED]
--- Please enter the report below this line. ---
dkimproxy runs as user root, but it dos
Package: wnpp
Severity: wishlist
Owner: Thom May [EMAIL PROTECTED]
* Package name: augeas
Version : 0.0.8
Upstream Author : David Lutterkort
* URL : http://augeas.net/
* License : LGPL
Programming Lang: C
Augeas is a configuration editing tool.
.
It
I believe I found the problem, which is that parsesys() replaces the
debconf value with the output from 'hostname --domain'. Here is an
untested draft patch to solve it. It check if the current debconf
value is empty or the same as in the template, and only try to gess
the domain name if it is.
It seems that the problem come when there is 'bold' or anything else
after the font without the font size.
Here is a patch which corrects this:
--- tkdiff.orig2008-04-18 10:20:54.55659 +0200
+++ tkdiff2008-04-18 10:25:33.45919 +0200
@@ -155,7 +155,11 @@
#debug-info entryfont
Package: brdesktop-flavours
Severity: serious
Version: 0.1
Justification: broken dependencies
[ Quoting debcheck[0] ]
Your package cannot migrate to testing due to broken dependencies and
its arch:all-ness:
libsuitespare unavailable on all arches. Others due to their hardware
deps only
reassign 476394 ncurses
thanks
From the discussion with the upstream author, this is
a problem of ncurses.
Thanks for your maintenance.
Regards,2008-4-18(Fri)
--
Debian Developer - much more I18N of Debian
Atsuhito Kohda kohda AT debian.org
Department of Math., Univ.
On Fri, Apr 18, 2008 at 09:52:03AM +0200, Sylvain Le Gall wrote:
Package: ocaml
Version: 3.10.1-1
Severity: normal
Hello,
The section of generated documentation, should be Programming and not
Applications/Programming.
.. or rather Programming/ocaml. We had a (short) discussion on the
tags 476647 - pending
thanks
On Fri, Apr 18, 2008 at 09:52:03AM +0200, Sylvain Le Gall wrote:
The section of generated documentation, should be Programming and not
Applications/Programming.
Actually no.
The current one is not the appropriate and I agree. But now we have
something better than
Package: snort
Version: 2.7.0-13
Severity: normal
Dear Debian maintainer,
while backporting the package to etch in order to have a snort with
prelude support, I've learnt the hard way that the includes configure
skript tries a test compile against libprelude-dev where it also
requires
Le vendredi 18 avril 2008 à 00:29 +0200, Moritz Muehlenhoff a écrit :
Hi Olivier,
Sorry for the late reply. We were busy with other issues.
I know (seen all the security updates announcements), thanks for this
hard work.
Thanks for taking over phpgroupware maintenance, we're looking
Thanks a lot. I will notify Moose's upstream.
2008/4/17, Niko Tyni [EMAIL PROTECTED]:
I can reproduce the crash with just
#!/usr/bin/perl
use threads;
use re 'eval';
my $a = qr{(??{a})};
print match\n if bc =~ /(??{b})/;
my $thr = threads-create(sub { });
$thr-join();
Package: mr
Version: 0.24~bpo40+1
Severity: normal
Hello,
mr is reporting error like:
mr status: /home/gildor/programmation/ocaml-posix-aio
No changes!
mr status: command failed
When it found a darcs repository with no change.
It should just end the same way as when it found a non changed
On Fri, Apr 18, 2008 at 06:46:11 -, Frank Lanitz wrote:
On Thu, April 17, 2008 11:20 pm, Julien Cristau wrote:
does this also happen if you use the radeon driver
(xserver-xorg-video-ati) instead of radeonhd?
I can't say, since I'm using an ATI 2400HD chipset which is not supported
by
Am Montag, den 14.01.2008, 20:14 -0500 schrieb James R. Van Zandt:
Package: octave
Version: 1:2.9.19-2
Severity: normal
The octave package is a virtual package, which will automatically
install the most recent version of octave.
Well, not really. The octave package pulls in the so
Package: mount
Version: 2.12r-19etch1
Severity: wishlist
Tags: patch
Can mount be modified to check for /usr/local/sbin/mount.${FSTYPE} if
/sbin/mount.${FSTYPE} doesn't stat? ?usr/local/sbin would be a more
suitable sopt for host specific files.
I've needed to create a special mount program but
PYGTK problem solved, please CLOSE the ticket.
-SD
-- Forwarded message --
From: Sedat Dilek [EMAIL PROTECTED]
Date: 18.04.2008 00:40
Subject: Re: [ephy-webkitgtk] BUG#476229: pygtk-2.0: pkgconfig path set
wrong
To: Loïc Minier [EMAIL PROTECTED]
The PYGTK problem concerning
[Andreas Tille]
I did not submitted it to SVN because it might have immediate
influence on the size of the distribution medium which is probably
not the best idea in the current state of development,
Adding a new task is not going to affect the distribution media. It
will force the debian-edu
Package: installation
Severity: important
I tried to install system with RAID1 (2x hard drives) and after that set up
crypted device (md1_crypt) and adding it to LVM. And creating two
logical volumes (root swap). I found out that it doesn't create
/conf/conf.d/cryptroot -file to initrd image.
Package: python-gdal
Version: 1.5.1-2+b1
Severity: normal
Hi
After the python 2.5 migration as default python interpreter in sid, it seems
that 2.4 gdal support is broken even if packaged using python-central.
Here is the output of a 2.4 session trying to load gdal :
[EMAIL
Package: thuban
Version: 1.2.0-2.1
Severity: normal
While updating my debian/sid, I add the following error :
Setting up python (2.5.2-1) ...
running python rtupdate hooks for python2.5...
Updating *.pc symlinks for python-gst0.10...
WARNING: compile error while trying to byte-compile
This has been implemented in backuppc 3.1.0.
--
Ciao, Flavio
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
On Fri, 18 Apr 2008, Atsuhito Kohda wrote:
Hi all,
On Thu, 17 Apr 2008 09:16:36 -0400 (EDT), Thomas Dickey wrote:
On Thu, 17 Apr 2008, Atsuhito Kohda wrote:
so, am I right to consider that this is a problem of
ncurses package?
yes (though rather than problem, I would say limitation).
It
Hi,
On Fri, Apr 11, 2008 at 04:13:05PM -0500, Steve M. Robbins wrote:
On Fri, Apr 11, 2008 at 03:13:15PM -0400, Joshua Judson Rosen wrote:
If you guys need some help, I can try updating the packaging for 1.35.
Packaging is not the issue, however. I think I can do that over the
weekend.
Package: postgresql-pljava
Version: 1.4.0-1
Severity: important
postgresql-8.3-pljava-gcj currently directly depends on a specific
version of libgcj, which is unneeded, and doesn't allow the bindings
to work with another jvm. The upstream should be built without setting
USE_GCJ, but by setting
[EMAIL PROTECTED] skrev:
I have sent you a couple of days ago, how come it did not get through
it's way?
I don't know. But I see you just sent it to the bug report address.
That failure is bug #466186, which has already been fixed in ia32-libs
version 2.3.
--
To UNSUBSCRIBE, email to
Package: x11-common
Version: 1:7.2-5
Severity: normal
The xorg.conf file generated by dexconf does not have a DisplaySize
option for the monitor. The effect is that some programms (audacious,
firefox 3beta, googleearth) display far too small fonts when the pitch
is not the default 75x75dpi. This
[Petter Reinholdtsen]
I believe I found the problem, which is that parsesys() replaces the
debconf value with the output from 'hostname --domain'. Here is an
untested draft patch to solve it. It check if the current debconf
value is empty or the same as in the template, and only try to gess
With the recent updates that have come through, the instances of the
panic messages has subsided to very few now.
Before there were hundreds per day
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Here's the stacktrace I get when starting it. Note that I had to reduce
my stack limit to 128k in order to limit the number of frames I had to
go through to get to the end. Obviously there's a recursion loop that
isn't being broken the way it should be.
Also of note is that I have also
Package: secure-delete
Version: 3.1-4
Severity: normal
Using srm -r * on partition with many small files results in a too many
open files error. Tried increasing file-max with sysctl -w
fs.file-max=65534 but it has no effect suggesting a programming issue?
As a test tried wipe package on the
Le mardi 01 janvier 2008 à 18:49 +0100, Tim Blechmann a écrit :
the first time, i log into gnome works flawless, after logging out and
trying to log in again, the gnome settings daemon cannot be started
again:
Does it still happen with gnome-settings-daemon/gnome-control-center
2.22 from
OK, I can apparently use
$ cat ~/.w3m/dirlist
type d
format d
sort t
but it should be documented in more places...
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Package: ca-certificates
Version: 20080411
Please provide a canonical and documented way to add certificates
locally.
Having update-ca-certificates handling the symlink hell and creating
the single certification file quite helpful, but not having a proper
way to add certificates locally is not.
Package: backuppc
Version: 3.1.0-2
Severity: wishlist
The graph of the pool size is nice indeed, but a bit too prominent IMHO.
Running jobs and failures are more important than the graph, so I'd
rather have it at the bottom of the summary page and I'd also add a
couple of p's to make some room
Package: virtualbox-ose
Version: 1.5.6-dfsg-6
Severity: important
I have a WinXP Home Edition guest, all patches from Windows Update including
SP2 applied, VirtualBox guest extensions installed (1.5.6r28241). I had been
using it extensively for several weeks now and it was rock solid.
But
Package: amsn
Version: 0.97-2
Severity: serious
Justification: Policy 7.5
I guess your recent upload misses a replace/conflict with the previous
version:
Unpacking amsn-data (from .../amsn/amsn-data_0.97-2_all.deb) ...
dpkg: error processing
Quoting Steve Langasek ([EMAIL PROTECTED]):
I don't think this correctly handles the case where start-stop-daemon
/fails/; we don't want to remove the pid file in that case, we want to leave
it in place since that indicates the daemon is still running for some
reason.
Well, coming back to
On Thu, Apr 17, 2008 at 10:58:59PM +0200, markus schnalke wrote:
Daniel Walrond [EMAIL PROTECTED] wrote:
Hello,
hi, nice to hear from you.
Yes, sorry for the delay.
On Tue, Oct 09, 2007 at 05:54:43PM +0200, markus schnalke wrote:
Package: mlmmj
Version: 1.2.11-7.1
Severity:
Package: ipython
Verison: 0.8.2.dfsg-2
Severity: normal
Hi,
arggh, this is because I was nice and installed /usr/bin/ipython2.X
scripts to start ipython with 2.4 or 2.5. I guess I should wrap a shell
script around that or so. Depending on 2.4 and 2.5 is kinda ugly - my fault.
I'm filing this in
Package: googleearth-package
Version: 0.5.3
Severity: normal
$ googleearth
Failed to load /emul/ia32-linux/lib/libIGGfx.so because
/emul/ia32-linux/lib/libIGGfx.so: cannot open shared object file: No
such file or directory
-- System Information:
Debian Release: lenny/sid
APT prefers testing
Package: gnome-panel
Version: 2.22.0-1
Severity: serious
Hi,
your package failed to build from source.
| Automatic build of gnome-panel_2.22.0-1 on njoerd by sbuild/sparc 98-farm
| Build started at 20080418-0213
Hi!
Any news about this?
If I don't hear any reply within a week I'll NMU.
(btw, send any followups to this address, the ackstorm one no longer reaches
my mailbox at this time)
On Tue, Jul 31, 2007 at 12:29:12PM +0200, Robert Millan [ackstorm] wrote:
tags 160478 patch
thanks
Hi,
I've
Package: samba
Version: 3.0.28a-1
Severity: important
--- Please enter the report below this line. ---
I see frequent PANICs of smbd like the following with various WINXP and Xin2003
clients.
[2008/04/17 15:37:35, 0] lib/fault.c:fault_report(41)
Package: libpng
Severity: grave
Tags: security
Hi,
the following CVE (Common Vulnerabilities Exposures) id was
published for libpng.
CVE-2008-1382[0]:
| libpng 1.0.6 through 1.0.32, 1.2.0 through 1.2.26, and 1.4.0beta01
| through 1.4.0beta19 allows context-dependent attackers to cause a
|
Le mardi 15 janvier 2008 à 08:26 +0100, alberto maurizi a écrit :
It would be nice to have the possibility to set the battery levels for
suspend/hibernate signals.
These settings are hidden, but can be set through GConf, in
/apps/gnome-power-manager/thresholds.
Cheers,
--
.''`.
: :' :
On Mon, Apr 14, 2008 at 02:33:43AM -0500, Diego Escalante Urrelo wrote:
Package: libfarsight0.1-3
Version: 0.1.27-1
Severity: serious
--- Please enter the report below this line. ---
Using debian sid to call another debian sid, I was unable to connect
both machines using empathy voip
Package: aircrack-ng
Version: 1:1.0~beta2-2
Severity: normal
aircrack-ng: segfaults when stopped using ^c
Index number of target network ? -- press ctrl+c here
Quitting aircrack-ng...
Segmentation fault
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy:
Package: gnome-terminal
Version: 2.22.0-1
Severity: minor
I sometimes use mouse to switch between windows, and if I click on
a tab in gnome-terminal the tab gets keyboard focus, i.e. everything I type
goes to the tab and the terminal itself does not get anything -- this gives
an impression that
tags 435666 fixed-upstream
thanks
This bug is fixed in upstream release perl-ldap 0.35:
perl-ldap 0.35 -- Sun Mar 30 13:35:04 CDT 2008
==
Bug Fixes
* Fix wrapping in Net::LDAP::LDIF
[..]
Please note that the bug not only produces broken output
On Fri, Apr 18, 2008 at 13:01:16 +0200, [EMAIL PROTECTED] wrote:
#6 /lib/libc.so.6(__assert_fail+0xef) [0x2b54201fe42f]
#7 /usr/lib/liblber-2.4.so.2(ber_flush2+0x16f) [0x2b541dbe1eef]
#8 /usr/lib/libldap_r-2.4.so.2(ldap_int_flush_request+0x2c)
[0x2b541d9b7b2c]
#9
On Fri, 18 Apr 2008, Petter Reinholdtsen wrote:
Adding a new task is not going to affect the distribution media. It
will force the debian-edu package to pass NEW, so we should be careful
with the timing anyway. :)
OK, this is the other reason why I did not just commited the change.
What do
Package: linux-image-2.6.24-1-686
Version: 2.6.24-5
Severity: normal
*** Please type your report below this line ***
Alsa sound stopped working on my Thinkpad T20 after upgrading from Etch
(2.6.18-5-686) to Lenny Testing (2.6.24-1-686). None of the 2.6.24 stock kernel
packages include the
Package: notification-daemon-xfce
Version: 0.3.7-1
Severity: normal
Notification-daemon-xfce is a replacement for Notification-daemon (from Gnome).
I Installed the program out of curiosity, the
result was that I had no messages at all. A 1 minute search on the site
revealed that it needed
On Wed, Apr 16, 2008 at 04:12:00PM +0200, Julian Andres Klode wrote:
I'll disable the chooser and hardcode SHOW_ONLY_FREE. As there are only about
5
applications in contrib+non-free, which can be installed from g-a-i, this
won't
hurt.
Maybe I'll replace it with the desktop chooser: 'All
This bug is particularly annoying when using screen from within a tabbed
terminal emulator (i do this frequently...ssh into a remote host, with
the tab title set to the host's name, then run screen), because it
doesn't just change the tab title, it also changes the icon-title.
this causes the
Package: istanbul
Version: 0.2.2-3
Severity: important
When Istanbul is started from a console it crashs:
$ istanbul
Traceback (most recent call last):
File /usr/bin/istanbul, line 30, in module
from istanbul.main import main
File /var/lib/python-support/python2.5/istanbul/main/main.py,
severity 475117 wishlist
thanks
Hi,
On Wed, Apr 09, 2008 at 08:17:08AM +0200, Tino Keitel wrote:
Package: qlandkarte
Version: 0.7.1~dfsg.1-2
Severity: normal
Hi,
qlandkarte always starts with a maximized window. It should better not
always start maximized, but remember the window
[Andreas Tille]
OK, this is the other reason why I did not just commited the change.
What do you think regarding the fact that ftpmaster has good chances
to work more efficiently these days: Upload now with additional
package to make sure that it will be included soon or hold it back
for a
Package: xaralx
Version: 0.7r1785-2
Severity: grave
--- Please enter the report below this line. ---
Xaralx crashes when printing. Here the output:
(xaralx:31164): GnomePrint-WARNING **: Could not create filter from
description 'GnomePrintFilterSelect': filter 'GnomePrintFilterSelect' is
Hi all !
On Fri, 18 Apr 2008 10:40:14 +0200, Stefano Zacchiroli [EMAIL PROTECTED]
wrote:
IIRC it was Programming/OCaml, but I'm not sure. Please check the
thread, find the appropriate value, and (re-)fix the bug accordingly.
All the package I maintain now use Programming/OCaml, though
I can confirm the bug. It happens to me randomly, not able to reproduce.
When the problem occurs I have this line logged in /var/log/Xorg.0.log :
(WW) xf86CloseConsole: VT_WAITACTIVE failed: Interrupted system call
and also this one in /var/log /daemon.log:
Apr 16 15:53:37 debian
SJ Please try the following:
SJ log in as root on the console, type su - nobody (getting the No
SJ directory,... message above) and type e. Without hitting return, I got
SJ the message: -su: e: command not found.
Holy moly, I can reproduce that. I apologize to emacs co. It is a su bug.
Dear
On Fri, Apr 18, 2008 at 11:21:36AM +, Ronald wrote:
Notification-daemon-xfce is a replacement for Notification-daemon (from
Gnome). I Installed the program out of curiosity, the result was that I had
no messages at all. A 1 minute search on the site revealed that it needed
libnotify. On my
Thanks for the infomration.
Best regards,
// Ola
On Thu, Apr 17, 2008 at 01:45:54PM +0100, Marcin Owsiany wrote:
On Thu, Apr 10, 2008 at 02:14:39PM +0100, Marcin Owsiany wrote:
On Thu, Apr 10, 2008 at 10:13:42AM +0200, Ola Lundqvist wrote:
I think this problem is actually with drbd. The
Hi Peter
Do we need a poststop as well?
Best regards,
// Ola
On Thu, Apr 17, 2008 at 01:42:10PM +0200, Peter Gervai wrote:
Package: vzctl
Version: 3.0.22-5
Severity: wishlist
Tags: patch
Attached patch makes ve start script to mount ve and run
/etc/conf/veid-prestart.sh
if it exists.
Hi,
I just wondered: Is there any update? Is the problem identified or even
solved? Should this report be closed or merged with another bug?
Thanks,
Michael
On Wed, Feb 27, 2008 at 02:29:38PM +0100, Arno van Amersfoort wrote:
Michael,
I'm already looking into this problem (the submitter
1 - 100 of 402 matches
Mail list logo