Package: fai-setup-storage
Version: 3.4.2
Severity: important
Tags: patch
Hi,
Preserving a RAID volume doesn't work in 3.4.x:
- mdadm --detail --scan doesn't give information on non-assembled
arrays, leading setup-storage to think there aren't any;
- preserved arrays must be assembled
On Wed, Sep 15, 2010 at 11:25 AM, Jamie Zawinski wrote:
In summary:
The Debian package of xscreensaver currently excludes many savers from the
default install, on the basis of them using too much CPU. This is no longer
the case. As those savers no longer use too much CPU, the
I've done some more comprehensive testing on a full system to come up with this:
- echo -e \n(there are other `cat $LAST_RUN_FILE |wc
-l` packages previously reported to you pending an upgrade!)
+ echo -e \n(there are $(grep -xf $LAST_RUN_FILE
$TMPFILE |wc -l) other
Package: linthesia
Version: 0.4-1
Severity: wishlist
Hi,
just after you have prepared this package, upstream has released
a version called 0.4-2.
I am not sure that's the exact difference, since I could not find
any changelog, but it seems to be somewhat newer.
Could you please package that?
tags 577205 + pending
thanks
Dear maintainer,
I've prepared an NMU for catfish (versioned as 0.3.2-1.1) and
a dsc file can be found here :
http://mentors.debian.net/debian/pool/main/c/catfish/catfish_0.3.2-1.1.dsc
Regards.
Martijn van Brummelen
diff -u catfish-0.3.2/debian/changelog
tags 592243 + patch
tags 592243 + pending
thanks
Hi,
I've prepared an NMU for sendmail (versioned as 8.14.3-9.3) and
uploaded it to DELAYED/2. It simply declares another conflict of rmail
against masqmail.
Dear release team,
please make a freeze exception for this upload once it's accepted.
On Friday 17 September 2010 13:03:51 Jérémy Lal wrote:
Thank you for the patch.
Do the armhf port is concerned by squeeze release, so libv8 for armhf
should get a freeze exception ?
No, not at all. armhf is a squeeze+1 at the earliest, so there is no need to
get an exception. Feel free to
Package: wmbubble
Version: 1.46-2
Severity: normal
Hi Giovanni,
what version of wmbubble dependecies do you have?
(and especially libgtk2.0-0 version ?)
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel:
On 15/09/2010 10:55, Modestas Vainius wrote:
Speaking strictly about kdepim source package, its diff is rather big
(see diffstat below). However, given what I said above, would you grant
a freeze exception for this package (after it proves itself in unstable
obviously)? Thank you for
On 15/09/2010 10:55, Modestas Vainius wrote:
Would you grant a freeze exception for this package after it spends
some time in unstable? Thank you for considering.
Yes.
(P.S.: answer for kdepim is coming… once I find some time for it or
someone beat me to it).
Regards,
--
Mehdi Dogguy
Hi Kristof!
Firstly, thanks for your bug report.
just after you have prepared this package, upstream has released
a version called 0.4-2.
I am not sure that's the exact difference, since I could not find
any changelog, but it seems to be somewhat newer.
Could you please package that?
Hi Soeren,
Could you please try this again with package python-apt-dbg installed?
I think that will provide some of the missing information in the backtrace.
On 17/09/10 04:23, Soeren Sonnenburg wrote:
# gdb --args python /usr/bin/unattended-upgrades
...
(gdb) bt
#0 __strlen_sse2 () at
Package: gda2-mysql
Version: 1.2.4-1.2
Severity: grave
Justification: renders package unusable
I was using the gda-mysql providor for libgad2. I was trying to insert in a
field
text some text with semicolons ej:
CREATE TABLE gamusino (id INT,texto TEXT);
INSERT INTO gamusino (1,';');
Tormod from the checks I made I believe we could just drop the split.
-Original Message-
From: Tormod Volden debian.tor...@gmail.com
Date: Fri, 17 Sep 2010 14:27:49
To: Jamie Zawinskij...@jwz.org; 596...@bugs.debian.org
Reply-To: Tormod Volden debian.tor...@gmail.com,
Package: gda2-mysql
Version: 1.2.4-1.2
Severity: grave
Justification: renders package unusable
I was using the gda-mysql providor for libgad2. I was trying to insert in a
field
text some text with semicolons ej:
CREATE TABLE gamusino (id INT,texto TEXT);
INSERT INTO gamusino (1,';');
Package: svn-buildpackage
Version: 0.8.1
Severity: normal
Hi,
svn-buildpackage exits with error if a file has a lock set:
=
E: Found unresolved issues:
K .c
E: Resolve them manually before continuing
Package: libatomic-ops
Version: 7.2~alpha5+cvs20100601-1
Tags: patch
User: ubuntu-de...@lists.ubuntu.com
Usertags: origin-ubuntu maverick ubuntu-patch
This the first issue cause a build failure by including the header on armel, the
second one was an issue seen after a code review. See
Package: ftp.debian.org
Severity: normal
Hi,
I'm importing the information of
http://ftp-master.debian.org/new.html
into UDD and since some time (about 10 days) the import script reports
about missing HTML pages for certain packages. The problem does not
seem to be temporary, it is the
tags 578609 + pending
thanks
Dear maintainer,
I've prepared an NMU for pauker (versioned as 1.8+dfsg-4.1) and
a dsc file van be found here:
http://mentors.debian.net/debian/pool/main/p/pauker/pauker_1.8+dfsg-4.1.dsc
Regards.
Martijn van Brummelen
diff -u pauker-1.8+dfsg/debian/control
Package: gnash
Version: 0.8.8-5
Severity: minor
Hi,
in the Player tab in Edit - Preferences (from the menu you reach when you
right-click into a flash area in the browser), firefox is hardcodec in the
command which should be used to open links. Please replace this with sensible-
browser instead.
Package: wnpp
Severity: wishlist
Owner: NeuroDebian Team t...@neuro.debian.net
* Package name: neuron
Version : 7.2
Upstream Author : Michael Hines michael.hi...@yale.edu and others
* URL : http://www.neuron.yale.edu/
* License : GPL
Programming Lang: C,
Le 17/09/2010 14:15, Sven Joachim a écrit :
On 2010-09-17 11:48 +0200, Frédéric Boiteux wrote:
When porting an own application using ncurses from an old 5.5 version to
a current 5.7 (i.e. on a Debian Lenny system), I found a bug related to free
of screens (the application manages
Package: python-xklavier
Version: 0.3-1
Severity: minor
The Homepage field should point to the correct URL where upstream
distributes the source etc:
http://devel.randomink.org/projects/python-xklavier
(I'll get this done later this week)
-- System Information:
Debian Release: squeeze/sid
APT
tags 561941 + pending
thanks
Dear maintainer,
I've prepared an NMU for smbldap-tools (versioned as 0.9.5-1.1) and
a dsc file van be found here:
http://mentors.debian.net/debian/pool/main/s/smbldap-tools/smbldap-tools_0.9.5-1.1.dsc
Regards.
Martijn van Brummelen
diff -u
Package: libxi6
Version: 2:1.3-4
Severity: important
This bug occurs when you are installing the program changes Quartus 10.0.
Www.altera.com Site.
altera_installer_cmd: symbol lookup error: /usr/lib/libXi.so: undefined symbol:
XESetWireToEventCookie
thanks
-- System Information:
Debian
Package: pm-utils
Version: 1.3.0-2
Severity: normal
Tags: patch
Hi there!
Today I upgraded my system and it happened that the kernel was upgraded
as well, from /var/log/dpkg.log:
2010-09-16 09:28:54 upgrade linux-image-2.6.32-5-amd64 2.6.32-21 2.6.32-22
And now pm-hibernate does not want to
reassign 597099 src:pyxdg
tags 597099 - patch
reassign 591017 src:pyxdg
forcemerge 591017 597099
thanks
* Matthias Klose d...@debian.org, 2010-09-16, 17:26:
attached is a patch to build a python3-xdg package; I have no
interest in pyxdg itself, just took it as an example for a package
using
Package: lightspark
Version: 0.4.4.1-1
Severity: minor
Hi there,
Since lightspark 0.4.2.2, lightspark is able to fallback to gnash on those
cases where lightspark can find gnash and it knows he's going to try to play
some flash that it doesn't support and gnash does. For this feature to be
Package: release.debian.org
Severity: normal
User: release.debian@packages.debian.org
Usertags: unblock
Please unblock package ejabberd. It's only a bugfix update and adds a
new debconf translation:
#v+
ejabberd (2.1.5-2) unstable; urgency=low
tags 564425 + pending
thanks
Dear maintainer,
I've prepared an NMU for cowdancer (versioned as 0.62+nmu1)
dsc
http://mentors.debian.net/debian/pool/main/c/cowdancer/cowdancer_0.62+nmu1.dsc
Regards.
Martijn van Brummelen
diff -Nru cowdancer-0.62/debian/changelog
tag 597163 pending
thanks
2010/9/17 Chris Leick c.le...@vollbio.de:
Please find attached the newest german manpage translation.
Thanks a lot!
We now have four complete manpage translations.
Thats simply amazing. :)
Best regards
David Kalnischkies
P.S. You had a small syntax error in the
Package: wnpp
Severity: wishlist
Owner: Noel David Torres Taño env...@rolamasao.org
Actually kstars offer each user to download some data, from the net, which
causes bandwith and disk waste (See #596007). I will package one of those
datafiles (one of the catalogs) to avoid that, and I want to
Hi,
there is also problem with the reseting HOME interactive sudo mode.
The old behaviour was, that HOME was kept in common use e.g.
sudo xlogo
so $HOME/.Xauthority was accessible for xlogo.
And HOME was reset in the case of interactive sudo
sudo -i
and HOME is /root in that case.
That is
tags 568830 + pending
thanks
Dear maintainer,
I've prepared an NMU for libmsn (versioned as 4.1-1.3)
http://mentors.debian.net/debian/pool/main/l/libmsn/libmsn_4.1-1.3.dsc
Regards.
Martijn van Brummelen
diff -u libmsn-4.1/debian/changelog libmsn-4.1/debian/changelog
---
Package: plymouth
Version: 0.8.3-9
Severity: normal
I checked the two files you mentionned above and they contain ...attach...,
however I still have glitches with the text plugin on two different systems.
After some time (I guess when it enters runlevel ?), the progress bar is
duplicated (just
Package: dnsmasq
Version: 2.55-1
Severity: important
Tags: patch
Hi Simon,
I'm trying to make sure the fix you suggested makes it into the package
before Squeeze is released. I think it's very reasonable to get a freeze
exception for that one-line fix for this rather serious problem.
Thanks,
On Sun, Aug 15, 2010 at 09:47:01AM +0200, Lucas Nussbaum wrote:
Source: eucalyptus
Version: 1.6.2-2
Severity: serious
Tags: squeeze sid
User: debian...@lists.debian.org
Usertags: qa-ftbfs-20100815 qa-ftbfs
Justification: FTBFS on amd64
Hi,
During a rebuild of all packages in sid, your
Package: smbclient
Version: 2:3.4.8~dfsg-2
Severity: important
File: /usr/bin/rpcclient
while within the rpcclient shell pushing the tab key two times leads to a
segfault if no completion is possible. e.g. there is no rpcclient command
starting with the letter b, so typing b and tab leads to
Package: plymouth
Version: 0.8.3-9
Severity: normal
Same problem here on two different machines.
I am also using GDM.
-- System Information:
Debian Release: squeeze/sid
APT prefers experimental
APT policy: (500, 'experimental'), (500, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux
This is fixed in recently uploaded 0.6.4-1. Changelog says:
0.6.4 (20100612)
- Fixed bug: need double-fork on Linux (spotted by Joey Hess joeyh
at debian.org)
--
Sergey Svishchev
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe.
Package: amsn-data
Version: 0.98.3-2
Severity: normal
Hi,
The current music plugin for audacious does not detect when the player is set
to the paused state and shows the currently paused track as if it were still
playing.
Some other glitches were occurring under the hood when audacious is not
Package: mailgraph
Version: 1.14-1.4
Severity: normal
We rsync mail logs to a remore web server where mailgraph is installed.
When doing a dpkg-reconfigure, it does not affect to mail_log variable
correctly and always defaults back to /var/log/mail.log
We ended up modifying
On 22.06.2010 10:33, Jean-Luc Coulon (f5ibh) wrote:
I've an USB-Serial adapter.
Due to the rule in /lib/udev/rules.d/95-upower-wup.rules, it is grabbed by
upowerd.
It appears that the IDS (vendorID/ProductID) in that rule is wrong.
My USB-Serial adapter has 0043:6001 which is reported by
On 2010-09-17 15:41 +0200, Frédéric Boiteux wrote:
Le 17/09/2010 14:15, Sven Joachim a écrit :
On 2010-09-17 11:48 +0200, Frédéric Boiteux wrote:
Could you show some sample code that triggers the bug? The patch looks
correct to me, but I'd like to verify that it works.
The application
Package: release.debian.org
Severity: normal
User: release.debian@packages.debian.org
Usertags: unblock
Please unblock package yafray 0.0.9+dfsg-5, as it makes the package build again
on kfreebsd-* architectures.
yafray (0.0.9+dfsg-5) unstable; urgency=medium
* QA upload.
* Store
I have a few packages which are uploaded in experimental and unstable.
I sopport one build-system for this package which is used in both
cases. So I usually do uploads:
unstable-experimental-experimental-unstable... etc. Build-system is
kept in git (branches), all packages have one
I cannot reproduce this bug, I just built rpms for both epel-5-x86_64
and epel-5-i386 on two different machines running squeeze (one
being a x86_64 machine, the other one is an i386).
# dpkg -l mock
[...]
ii mock 1.0.8-1Build rpm packages inside a chroot
# mock -r epel-5-i386
I encounter the same bug: I prepared an USB stick with a squeeze debian
installer,
following the instructions at
http://d-i.alioth.debian.org/manual/en.i386/ch04s03.html#usb-copy-flexible
I used the files from
Hello,
On 09/17/2010 05:12 PM, Miguel Landaeta wrote:
On Sun, Aug 15, 2010 at 09:47:01AM +0200, Lucas Nussbaum wrote:
Source: eucalyptus
Version: 1.6.2-2
Severity: serious
Tags: squeeze sid
User: debian...@lists.debian.org
Usertags: qa-ftbfs-20100815 qa-ftbfs
Justification: FTBFS on
On 09-10 07:23, Jonathan Nieder wrote:
Hi,
Witold Baryluk bary...@smp.if.uj.edu.pl wrote:
In Debian main mechanism for providing building flags when building
packages is by using /etc/dpkg/buildflags.conf.
This file is readed by dpkg-buildpackage, and nacassary
environment
On Tue, Sep 07, 2010 at 01:08:36AM +0200, Lucas Nussbaum wrote:
Package: verilog-mode
Version: 558-1
Severity: serious
Tags: squeeze sid
User: debian...@lists.debian.org
Usertags: qa-ftbfs-20100906 qa-ftbfs
Justification: FTBFS on amd64
Hi,
During a rebuild of all packages in a
Hi Torsten,
Am 12.09.2010 20:41, schrieb Michael Tautschnig:
Err, no, I requested removal on *mips*, not hppa!
To make it even more complicated: openjdk-6 builds again on mips. The
build process just needs 10 days!
Well, now that you've been promoted to FTPMaster you might well want to
Package: puppetmaster
Version: 2.6.0-4
Severity: normal
Tags: patch
The attached patch to the _client_ side fixes the issue for me.
This is from upstream bug 4319 (first patch, the second one you
already integrated).
As far as I know, upstream 2.6.1 has this, but the fix should also
go into the
Thank you for answering.
1. No, apt-get -f install does not do or change anything
2. Today's update was quite a lot of stuff (41 packages). I did it from
the command line with apt-get as you recommended, but as far as I see ,
there is no useful output. And afterwards direct rendering had
Package: bindgraph
Version: 0.2a-5
Severity: serious
User: debian...@lists.debian.org
Usertags: piuparts piuparts.d.o
Hi,
during a test with piuparts I noticed your package failed to install. As per
definition of the release team this makes the package too buggy for a
release, thus the
Hi,
I recently posted the below message to linux-raid, but perhaps it should
have gone here first... Perhaps Neil Brown will have some bright ideas.
Common factors on all three pieces of hardware seeing the problem seem
to have been:
Lenny 2.6.26 kernel
Serial console
md with lvm
Find attached a number of patches addressing your concerns.
--
blog: http://tshepang.tumblr.com
=== modified file 'apt/cache.py'
--- apt/cache.py 2010-09-03 10:08:20 +
+++ apt/cache.py 2010-09-17 14:00:53 +
@@ -46,15 +46,15 @@
class Cache(object):
Dictionary-like package cache.
-
On Fri, Sep 17, 2010 at 12:25 PM, Alessio Treglia ales...@debian.org wrote:
Hi,
an user has reported the following on the Debian BTS [1].
Hope to hear from you soon.
Thanks for reporting this!
On Fri, Sep 17, 2010 at 9:18 AM, Jonas Pfenninger jo...@sunrise.ch wrote:
Package: cmus
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi Michael,
Le 17/09/2010 17:15, Michael Biebl a écrit :
On 22.06.2010 10:33, Jean-Luc Coulon (f5ibh) wrote:
Hi Jean-Luc,
I had a short discussion with the upstream developer of upower, Richard
Hughes,
on IRC. I'll copy it here for
Package: base
Severity: normal
Hello,
I've an error in dmesg:
$ dmesg | grep -i keyboard
[0.430054] atkbd.c: Failed to enable keyboard on isa0060/serio0
[0.430174] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input1
I think it is a reason, that LED
This is an overview of my IP Cache Statistics:
security.debian.org2001:a78:5:0:216:35ff:fe7f:be4f-OK
2001:a78:5:1:216:35ff:fe7f:6ceb-OK
2001:8d8:2:1:6564:a62:0:2-OK
Dmitry E. Oboukhov un...@debian.org writes:
RA Aie. Please don't do that. That implies that all the changes in
RA 3.6.9+debian-1 are in 3.5.12+debian-1, but they aren't (in particular, all
RA the upstream changes aren't). This will potentially confuse all sorts of
RA things in Debian, not
Package: dkms
Version: 2.1.1.2-5
Severity: normal
dkms: running auto installation service for kernel
2.6.36-rc4-r600fence-netpollirq-smbinit-amd64:
openafs (1.5.75)...failed.
virtualbox-ose (3.0.12)...failed.
Where is the virtualbox-ose (3.0.12) ?
Just looking for another bug in Iceweasel I've found this one...
I can confirm that this is an issue with fglrx-10.6 and above,
as after downgrading fglrx to 10.5 the bug went away. Also,
I've read today that this bug should be fixed in fglrx-10.9
--
To UNSUBSCRIBE, email to
Using files from the same architecture solved the problem for me.
One way of preventing this sort of thing would be to add a little footnote to
the installation guide, in section 4.3.2.2 [1], just after footnote 8, that the
iso image should be for the same architecture as the hd-media files.
The
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA256
On 2010-09-16 22:21, Torsten Werner wrote:
Hi Guillaume,
On Thu, Aug 26, 2010 at 5:49 PM, Guillaume Mazoyer
respawne...@gmail.com wrote:
Is anyone interested by this bug?
sorry for not replying earlier.
Do you need more info or other
Package: keytouch
Version: 2.4.1-11
Severity: important
I have a Logitech S510 keyboard, and keytoch ships with said config.
Thoguh when I tries it out, most keys doesn't react, and for example the
stop key decreases volume, using their getkeycodes program, I can
deduce that the usb-code in the
On Fri, Sep 17, 2010 at 3:30 PM, Jose Luis Rivas josel...@rivco.net wrote:
Tormod from the checks I made I believe we could just drop the split.
Jose, can you post your results here? I ran tests now (from a Ubuntu
10.10 beta live CD I had at hand, the graphics stack is pretty much
the same as in
Package: konq-plugins
Version: 4:4.4.0-2
Severity: important
When I try to enable proxy from 'tools' menu (tools - html settings - enable
proxy) it doesn't work.
If I go back in the 'tools' menu, 'enable proxy' is still unchecked and the
proxy is off.
However, enabling proxy from 'settings'
Hi Steve,
On Sunday, 12. September 2010, Steve Langasek wrote:
For migration, I think it's best to just do:
if previous_version_older 2.4.23-3 [ -f ${SLAPD_CONF} ] ! [ -d
/etc/ldap/slapd.d ]
This makes it a one-time migration on the first upgrade, only if slapd.d
isn't already
Package: watchdog
Version: 5.9-1
Severity: minor
Hi,
I decided to try this package and was soon confronted with log messages like:
wd_keepalive[1325]: starting watchdog keepalive daemon (5.9):
wd_keepalive[1325]: int=10 alive=(null) realtime=yes
wd_keepalive[1325]: stopping
On Fri, 2010-09-17 at 18:59 +0200, Carl Fürstenberg wrote:
I have a Logitech S510 keyboard, and keytoch ships with said config.
Thoguh when I tries it out, most keys doesn't react, and for example
the
stop key decreases volume, using their getkeycodes program, I can
deduce that the usb-code
tags 595946 +patch
thanks
2010/9/7 Michal Čihař ni...@debian.org:
Package: po4a
Version: 0.40.1-1
Severity: wishlist
File: /usr/share/perl5/Locale/Po4a/Text.pm
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi
currently po4a parses asciidoc titles properly, however it includes new
line
Package: iceweasel
Version: 3.6.9
Severity: Wishlist
I'm using KDE as a desktop environment and don't have Evince installed (I use
Okular as a PDF viewer) and the default PDF viewer for Iceweasel in my case is
GIMP, which is not a good choice... The ideal situation would be if Iceweasel
used
Package: wnpp
Severity: wishlist
* Package name: mozilla-httpfox
Version :
Upstream Author : Pappkamerad
* URL : http://code.google.com/p/httpfox/
* License : GPL
Programming Lang: Javascript
Description : An http analyzer addon for firefox
HttpFox is
OK, I've done some research on config files in .kde/share/config/
I've found this file: settingspluginrc
with inside just one line:
SavedProxyType=0
Rename that file with another name solved my problem (didn't try to
restart KDE yet).
'Enable proxy' from 'tools' seems to work again.
I don't
Hi everybody,
I spent the last hour re-reading the entire bug report, testing the new
mdadm version and testing a way to restore the system using a live CD.
Here's what I found:
* I am really sure that this is not a GRUB bug. You all get to the
initramfs. That's where problems start. GRUB
reassign 597087 partman-auto
thanks
Quoting Nelson A. de Oliveira (nao...@debian.org):
Package: debian-installer
Severity: normal
Tags: d-i
Hi!
Sorry if it's already known or already reported, but trying to make a
install (with 20100916-10:40 daily-image of kfreebsd-amd64) on a disk
reassign 597088 partman-ufs
thanks
Quoting Nelson A. de Oliveira (nao...@debian.org):
What can I do to debug this issue, please?
Probably look in console 4 to see whether something is
displayed. Alternatively, swith to console2, open a shell there and
look into /var/log/syslog
(no my name is not Thomas ... :-) )
Hi,
quoting the subject:
| /usr/sbin/faimond: missing dependency: /usr/sbin/faimond needs
| package 'libproc-daemon-perl'. It is listed as 'suggested', but
| without it the application will not run.
Thomas, I consider this bug qualifies as RC-bug
forwarded 597203 https://bugzilla.samba.org/show_bug.cgi?id=7688
thanks
Quoting bubo (bubo.igna...@yahoo.de):
Package: smbclient
Version: 2:3.4.8~dfsg-2
Severity: important
File: /usr/bin/rpcclient
while within the rpcclient shell pushing the tab key two times leads to a
segfault if no
OoO En cette matinée ensoleillée du vendredi 17 septembre 2010, vers
09:29, Alessandro De Zorzi l...@nonlontano.it disait :
I confirm that upgrade from 0.3.1-4 to 0.3.1-5
override /usr/share/roundcube/.htaccess
Yes, there was no change here since we are in feature freeze. Use a
Hello,
You can achieve this customization of the ssh command by putting something
like this in your ~/.ssvncrc file:
env=SSH=ssh -Snone
or by exporting SSH='ssh -Snone' in your environment before starting ssvnc.
The SSH option is now documented in the upstream ssvnc 1.0.29 development
version
tag 479172 pending
thanks
Date: Wed Dec 23 10:01:49 2009 +0100
Author: Matthijs Kooijman matth...@stdin.nl
Commit ID: 083834b407e2e76e1386f9004e495a88f2906cf4
Commit URL:
http://git.debian.org/?p=users/agx/git-buildpackage.git;a=commitdiff;h=083834b407e2e76e1386f9004e495a88f2906cf4
Patch URL:
Hi,
Russel writes:
But embarrassingly, it wasn't the upgrade to
xserver-xorg-input-synaptics that was the problem. It was Gnome.
Upgrading it had for some unfathomable reason turned tap-to-click off
(among other touch pad things) thus overriding the settings in
xorg.conf.
I just want to
Package: php5
Version: 5.3.2-2
Severity: grave
Justification: renders package unusable
I keep getting this email sent to me:
PHP Warning: PHP Startup: Unable to load dynamic library
'/usr/lib/php5/20090626+lfs/mcrypt.so' - /usr/lib/php5/20090626+lfs/mcrypt.so:
cannot open shared object file:
Package: texlive-binaries
Version: 2009-7
Severity: normal
Tags: l10n
I was surprised to find that man vlna produced a man page in what
appears to be Czech. Is this intentional?
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (990, 'testing'), (500,
Package: squirrelmail
Version: 2:1.4.15-4+lenny3.1
Severity: normal
When I try to change the password via the webmail interface I get the following
message:
ERROR:
Could not make database connection
-- System Information:
Debian Release: 5.0.6
APT prefers stable
APT policy: (500, 'stable')
found 597203 2:3.5.5~dfsg-1
thanks
Quoting bubo (bubo.igna...@yahoo.de):
Package: smbclient
Version: 2:3.4.8~dfsg-2
Severity: important
File: /usr/bin/rpcclient
while within the rpcclient shell pushing the tab key two times leads to a
segfault if no completion is possible. e.g. there
Package: binutils
Version: 2.20.1-12
Severity: wishlist
Tags: patch
Here is a combined patch for your consideration. This patch implements
the features already incorporated into binutils-2.20.51.20100908. See
bugs
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=588357
package: fai-client
version: 3.3.5
Hi,
if a package is both listed in a PACKAGES remove and a PACKAGES install
block, the package is first installed and then removed. I consider this a
bug :-)
cheers,
Holger
signature.asc
Description: This is a digitally signed message part.
Hi,
Michal wrote:
Yes this is the real cause of the problems - GNOME now includes some
way to configure touchpad, which do conflict with GPDS. gsynaptics is
not affected by this because it uses different way to load the settings
(autostart script vs. settings-daemon plugin). There is ongoing
Package: notmuch
Version: 0.3.1+b1
There is apparently a patch floating around that allows one
to search for from, to, attachment, and subject
prefixes.
Please include this in the Debian package.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of
Package: udev
Version: 160-1
Severity: important
I tried 4 or 5 different brands of flash drives all with the same result.
There are three partition setup on this flash drive.
sdb2 and sdb3 automount and work without any problems but
sbb1 will always attempt to mount as an ISOFS.
I'm guessing for
Package: pixelpost
Version: 1.7.1-5
Severity: grave
Tags: security
Hi,
Multiple vulnerabilities have been reported against pixelpost.
Full details can be found by following this thread:
http://marc.info/?t=12847028252r=1w=2
CVE-wise they are:
CSRF: CVE-2010-3305
SQL injection fixed in
Hi,
h01ger http://paste.debian.net/90185/ - thats on a squeeze system - any
ideas?
h01ger bitten by my own bug: #508644
h01ger and ssmtp misses a provides: default-mta - is that serious,
important, wishlist?
the log mentioned above is this:
r...@sun:~# dpkg -l ssmtp
Note that the high CPU usage is often (always) due to lack of
functionality in the graphic card drivers, and not to bugs in
xscreensaver. We rely on our own testing on different hardware and of
reported bugs about high CPU usage. This has not been very systematic
but as often in distribution
Package: I am not sure which package this breaks but I would assume
everything that looks for pam_limits would be broken
Version: Latest Stable
I setup a limit in /etc/security/limits.conf in various ways, I have tried
the following to date:
* - nofile 65535
AND
* - hard nofile 65535
* - soft
On Freitag, 17. September 2010, Holger Levsen wrote:
h01ger and ssmtp misses a provides: default-mta - is that serious,
important, wishlist?
I'm filing an important bug on ssmtp now.
aehm, no.
signature.asc
Description: This is a digitally signed message part.
Il giorno Sun, 12 Sep 2010 20:41:20 +0200
Michael Tautschnig m...@debian.org ha scritto:
libppl-swi | 0.10.2-8 | hppa
Err, no, I requested removal on *mips*, not hppa!
Ouch, what the heck I smoked that day? Sorry for not have caught it in
time (and I'm still wondering why this
101 - 200 of 278 matches
Mail list logo