Quoting Denis Laxalde (dlaxa...@gmail.com):
I would then say that this bug is not reproducible and its severity
In such case, it's perfectly OK for you to close it (send a mail -
bugnr-d...@bugs.d.o.sorry for being pedantic if you lready knew this).
may be downgraded. The partition
tags 604604 + moreinfo
thanks
23.11.2010 01:20, Jakub Wilk wrote:
Package: qemu-kvm
Version: 0.13.0+dfsg-2
Severity: grave
Justification: renders package unusable
After 0.12.5+dfsg-5 - 0.13.0+dfsg-2 upgrade kvm doesn't start anymore.
I get an error immediately:
$ kvm
kvm: vm entry
Etienne Millon wrote:
The package builds in a clean chroot, so I thought this was good
enough. If this is bad practice I will have another look at it.
Yes, best practice is to explicitly declare all build-time
dependencies that are not build-essential. So for example if
the code uses Xlib
On Mon, Nov 22, 2010 at 23:00, Henrique de Moraes Holschuh
h...@debian.org wrote:
On Sun, 21 Nov 2010, Costin Gusa wrote:
Is it ok to ask here about including uoa.gr autocreate/autosieve
patches or should I file a bug against the newly 2.4.4? (I just found
them prepared for 2.4.4 here:
tags 604209 patch
thanks
Hi,
I created a patch for this bug - just ignore error.
Please check and apply if it's okay.
---
diff -u ident2-1.07/debian/postrm ident2-1.07/debian/postrm
--- ident2-1.07/debian/postrm
+++
Dear maintainer,
I've prepared an NMU for lapack (versioned as 3.2.2-1.2). The diff
is attached to this message.
Regards.
diff -u lapack-3.2.2/debian/liblapack-pic.prerm
lapack-3.2.2/debian/liblapack-pic.prerm
--- lapack-3.2.2/debian/liblapack-pic.prerm
+++
Ok, so I started looking at the internals of dietlibc, and I noticed the
data returned by getdents64 looks as I would expect, but the struct
dirent64 does not match it. Apparently the way these things are being
compiled it ends up with sizeof(uint64_t) = 4, so the struct fields don't
line up.
This also applies to:
Package: libmed-dev,libmedimport-dev
Version: libmed-dev/2.3.6-4
Version: libmedimport-dev/2.3.6-4
Here is a list of files that are known to be shared by both packages
(according to the Contents file for sid/amd64, which may be
slightly out of sync):
tags 604028 + pending
thanks
According to dh-make-perl:
GD is in libgd-gd2-noxpm-perl | libgd-gd2-perl package
Dependencies added.
Regards,
--
Franck Joncourt
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact
Package: audacity
Version: 1.3.12-6
Severity: wishlist
When I start Audacity (with or without any audio files specifed on the
command line) and then wish to import additional audio files, usually
I want them from either the same directory as the files I specified on
the command line, or from the
Package: e2fsprogs
Version: 1.41.12-1ubuntu2
Severity: wishlist
When cross building using xdeb a macro in MCONFIG.in causes the build to fail
-- System Information:
Debian Release: squeeze/sid
APT prefers maverick-updates
APT policy: (500, 'maverick-updates'), (500, 'maverick-security'),
On Mon, 2010-11-22 at 21:21 +, Miguel Figueiredo wrote:
A Sábado 20 Novembro 2010 00:17:14 Daniel Pocock você escreveu:
Package: installation-reports
should the BR be moved from installation-reports to a specific package?
Almost certainly but I don't know which, partly because it's not
Hi,
This might be a known kernel bug[1] which got fixed recently. The
problem is somewhere in the b43/ssb driver, which won't get activated
until you install the necessary firmware files. Could you try the latest
linux kernel from experimental?
I'm having this problem (black screen, machine
The patch below enables the package to cross build using xdeb
---
diff -Nru e2fsprogs-1.41.12/debian/patches/cross.diff
e2fsprogs-1.41.12-1ubuntu2/debian/patches/cross.diff
--- e2fsprogs-1.41.12/debian/patches/cross.diff 1970-01-01
01:00:00.0 +0100
+++
On Tue, Nov 23, 2010 at 10:44:56AM +0300, Vladimir Stavrinov wrote:
There is some other strange effect: after some idle time the network in
the container stop working at all. I see this problem (drop
connectivity) only on the new created for testing container may be
because it is idle most of
tags 604532 -patch
thanks
On Mon, Nov 22, 2010 at 05:25:07PM +, Tom Grace wrote:
Package: virtinst
Version: 0.400.0-7
Severity: normal
Tags: patch
The virt-install command uses Redhat style CPU arch naming, causing an error
fetching the kernel and initrd from the mirror.
I've
Stefan Tomanek wrote:
Dies schrieb Jonathan Nieder (jrnie...@gmail.com):
How does this compare to Rick van Rein's funkey[1]?
Hm, funkey does require a kernel patch und looks quite dated?
Funky Daemon which demonstrates how to parse the /dev/funkey character
device.
Thanks for a quick
Hi,
* PJ Weisberg pjweisb...@gmail.com [2010-11-23 06:06:37 CET]:
There was a 1.9.1-1 when I made the earlier report. I've since
upgraded to 1.9.2-1. In order to do so, I had to install
wesnoth-1.8-core. :-)
Right - just stating that it won't be needed for the next upgrade
because I fixed
Package: debian-reference-en
Severity: wishlist
The debian reference documented differences between apt-get and aptitude
in detail.[1] I would suggest one more difference: Comparing to
aptitude, apt-get consumes less memory and usually runs operations
faster.
[1]
Ian Campbell i...@hellion.org.uk writes:
The version of xen-utils-common may also have some bearing on this since
it is the package which provides /lib/udev/rules.d/xend.rules
Here in working case I have
$ dpkg-query -W xen*
xen-hypervisor-amd64
xen-linux-system-2.6.32-5+bug580889.1-xen-amd64
Package: lxc
Version: 0.7.2-1
Severity: normal
User: syst...@packages.debian.org
Usertags: cgroups
Hi,
I'm running systemd [1], a new init system which uses cgroups to supervise
and confine processes. It uses a cgroup namespace mounted at
/sys/fs/cgroup/systemd
When I try to start a lxc
Christoph Anton Mitterer cales...@scientia.net writes:
Unfortunately it turned out, that my ISP had to but that respective
cluster into production now, and was therefore not longer able to play
around very much.
That's unfortunate. Do they advertise support for hosting debian in a
xen
On Tue, 23 Nov 2010 07:23:33 +0100
Ralf Spenneberg r...@spenneberg.net wrote:
Package: libclamav6
Version: 0.96.4+dfsg-1~volatile1
Severity: important
-- System Information:
Debian Release: 5.0.6
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)
Kernel:
Hello,
I have tried again with the 'Net install CD 5.0.6' and it works!
Understandable but it works
Regards
-Original Message-
From: Christian PERRIER [mailto:bubu...@debian.org]
Sent: Wednesday, November 10, 2010 6:43 PM
To: José; 504...@bugs.debian.org
Subject: Re: Bug#504922: Jose
Hi Ben,
Thanks for the quick response.
I'm trying the patch you send me but it seems to be a huge difference
from what I get using the source.
This is what i did:
apt-get source linux-image-2.6.26-2-xen-686
cd linux-2.6-2.6.26
fakeroot debian/rules source
fakeroot debian/rules setup
cd
Package: rkhunter
Version: 1.3.6-4
Severity: wishlist
rkhunter depends on exim4 | postfix | sendmail | mail-transport-agent. I'm
using it as part of a rescue/recovery live image, and having an MTA doesn't
seem strictly necessary, since I'll be using it interactively.
I think it'd be better to:
Package: cgroup-bin
Version: 0.36.2-3
Severity: normal
Hi,
now that the debian default kernel and the latest upstream kernel 2.6.36
have a dedicated sysfs directory to mount cgroups (/sys/fs/cgroup) we
should use that instead of /mnt/cgroup.
Regards,
Michael
-- System Information:
Debian
Package: bootchart2
Version: 0.12.4-2
Severity: normal
Hi,
I've profiled system startup using the following command line:
# cat /proc/cmdline
BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686
root=UUID=9a6d2bd2-58d1-4a75-baff-166b8637e3cc ro quiet initcall_debug
printk.time=y quiet init=/sbin/bootchartd
tags 604604 - moreinfo
tags 604604 + confirmed upstream patch
reassign 604604 linux-image-2.6.32-5-i686 2.6.32-27
severity 604604 normal
thanks
23.11.2010 01:20, Jakub Wilk wrote:
Package: qemu-kvm
Version: 0.13.0+dfsg-2
Severity: grave
Justification: renders package unusable
After
Hi,
The following bugs seem to be identical:
#601341
package linux-2.6
title xserver-xorg-video-nouveau: hangs X fb console on black
screen on dom0 xen instance
linkhttp://bugs.debian.org/cgi-bin/bugreport.cgi?bug=601341
#602418
package linux-2.6
hello
is there anyone working on this package, otherwise, i'd
ITP it.
yours,
gurkan
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Package: libcamlimages-ocaml-dev
Version: 1:3.0.1-5+b3
Severity: normal
oFreetype.cmi is created during build but is not installed. So OFreetype
is present in cma but is not accessible because of cmi absence.
$ ls src/oFreetype.*
src/oFreetype.cmi
src/oFreetype.cmo
src/oFreetype.cmx
On 11/23/2010 02:02 AM, Eugene V. Lyubimkin wrote:
[ CC'ed some interested persons ]
Hi,
Thomas, I don't consider the availability of the 'iptables.h' a blocker for
uploading, and here is why.
The status quo, as I understand, is 'several packages embed miniupnpc in their
source trees'.
Hi Krzysztof and Stefan,
Stefan Tomanek wrote:
I think esekeyd can only handle KEY events, while triggerhappy can also
process
Switch and button events. I am also unsure whether esekeyd support the
hotplugging of input devices (done in triggerhappy by a udev script) or daemon
control via
Hi.
For kfreebsd-amd64 it suffices to pass --disable-jemalloc
during configure.
Please could you disable jemalloc on non-linux platforms.
The malloc is used internally in pthread library ...
Petr
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of
Package: po-debconf
Severity: wishlist
Tags: l10n, patch
Hi:
Please find attached the PO file of the Spanish translation, as well
as the addendum for translator credits
Regards,
--
Omar Campagne Polaino
po-debconf-es.tar.gz
Description: Binary data
Hi.
Thanks for the fast response.
Am Dienstag, den 23.11.2010, 11:00 +0200 schrieb Török Edwin:
Please install gdb, and run this command (using the attached gdbscript
file):
$ gdb -batch -x gdbscript -c core log 21
I have problems running the gdbscript. The log contains:
(no debugging symbols
forcemerge 555384 604608
thanks
cu
Adrian
--
Is there not promise of rain? Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
Only a promise, Lao Er said.
Pearl S. Buck - Dragon Seed
--
To
On Sat, 20 Nov 2010, Milan Kupcevic wrote:
New patch is attached.
thank you very much, merged for review in maks/hook_thermal
http://git.debian.org/?p=kernel/initramfs-tools.git;a=summary
--
maks
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of
Package: initramfs-tools
Version: 0.98.4
Severity: normal
Hi,
This is a similar problem that was reported in #505440.
The DEVICE variable is leaked into the environment. The mdadm mkconf script
uses DEVICE when it is installing its config file.
In my case DEVICE is set by initramfs-tools to
On Tue, 23 Nov 2010 10:42:38 +0100
Ralf Spenneberg r...@spenneberg.net wrote:
Hi.
Thanks for the fast response.
Am Dienstag, den 23.11.2010, 11:00 +0200 schrieb Török Edwin:
Please install gdb, and run this command (using the attached
gdbscript file):
$ gdb -batch -x gdbscript -c
Subject: flac fails to cross build using xdeb
Package: flac
Version: 1.2.1
Severity: wishlist
Package needs to be configured with target ogg includes libraries when cross
building,
as per patch below
---
diff -purN maverick/flac-1.2.1//debian/rules
ppa/dputted/flac-1.2.1-3//debian/rules
---
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
This upload was blocked again due to
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=601971 . Now, it has
been found that that bug is not due to liboauth (see last comment on
that bug about the fact that twitter OAuth works). Its a problem with
bti,
On Mon Nov 22 18:59, Simon Fondrie-Teitler wrote:
Hi,
What is the status of this? There does not seem to have been any
progress since your last email in 2007. Is it OK if I take over the ITP?
Well, I've not done anything with the upstream code either since then, but be
my guest.
Matt
Hi,
Can you confirm that dovecot-imapd is still broken in squeeze? In that
case this bug would be release-critical. Otherwise I'd mark it as fixed
in squeeze and close it.
Best regards
Alexander Kurtz
signature.asc
Description: This is a digitally signed message part
On Tue, Nov 23, 2010 at 11:47:28AM +0200, ygrek wrote:
Package: libcamlimages-ocaml-dev
Version: 1:3.0.1-5+b3
Severity: normal
oFreetype.cmi is created during build but is not installed. So OFreetype
is present in cma but is not accessible because of cmi absence.
$ ls src/oFreetype.*
Package: anjuta
Tags: patch
User: soc-coordinat...@lists.alioth.debian.org
anjuta-tags.1
Description: Binary data
gbf-am-parse.1
Description: Binary data
gbf-mkfile-parse.1
Description: Binary data
reopen 601971
tags 601971 + moreinfo
thanks
On 0, Bilal Akhtar bilalakh...@ubuntu.com wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
This upload was blocked again due to
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=601971 . Now, it has
been found that that bug is not due to
Package: iscsitarget-source
Version: 1.4.20.2-1
Severity: normal
Compiliation against kernel 2.6.36 fails:
/usr/src/modules/iscsitarget/kernel/conn.c: In function ‘conn_info_show’:
/usr/src/modules/iscsitarget/kernel/conn.c:47: error: implicit declaration of
function ‘NIPQUAD’
Package: opencv-doc
Version: 2.1.0-2
Severity: wishlist
Please include a HTML version (as available online[1]) of the
documentation in opencv-doc.
Also some files in /usr/share/doc/opencv-doc should probably not be
included: license.txt (the same information is already available in
copyright)
Package: speakup-source
Version: 3.1.5.dfsg.1-1
Severity: normal
[...]
CC [M] /usr/src/modules/speakup/buffers.o
/usr/src/modules/speakup/buffers.c: In function ‘speakup_start_ttys’:
/usr/src/modules/speakup/buffers.c:33: error: ‘struct vc_data’ has no member
named ‘vc_tty’
Package: loop-aes-source
Version: 3.3a-1
Severity: normal
Compile against kernel 2.6.36[.1]:
[..]
CC [M] /usr/src/modules/loop-aes/tmp-d-kbuild/patched-loop.o
/usr/src/modules/loop-aes/tmp-d-kbuild/patched-loop.c: In function
‘loop_get_buffer’:
* Michael Prokop m...@debian.org [Die Nov 23, 2010 at 11:35:25 +0100]:
Compiliation against kernel 2.6.36 fails:
/usr/src/modules/iscsitarget/kernel/conn.c: In function ‘conn_info_show’:
/usr/src/modules/iscsitarget/kernel/conn.c:47: error: implicit declaration of
function ‘NIPQUAD’
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 11/23/2010 01:33 PM, Mehdi Dogguy wrote:
reopen 601971
tags 601971 + moreinfo
thanks
On 0, Bilal Akhtar bilalakh...@ubuntu.com wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
This upload was blocked again due to
On Tue, Nov 23, 2010 at 11:30:21AM +0100, Mattia Tristo wrote:
I have installed Debian 5.0 PPC testing on my PowerMac 7,3
tomorrow in the afternoon i will test the patch
Thanks
how *often* do I have to repeat that, no private mails!
if you have to say something in public, do so.
No private
On 22.11.10 Ralf Treinen (trei...@debian.org) wrote:
Hi,
I'm trying to run the first example of the document Creating diagrams for
chess problems (included below). This triggers an error since the
fselch12 font is not available (and I was unable to locate is elsewhere
in sid).
The trick
tags 604643 + upstream fixed-upstream patch wontfix
thanks
Michael Prokop, le Tue 23 Nov 2010 11:40:12 +0100, a écrit :
CC [M] /usr/src/modules/speakup/buffers.o
/usr/src/modules/speakup/buffers.c: In function ‘speakup_start_ttys’:
/usr/src/modules/speakup/buffers.c:33: error: ‘struct
On Tue, Nov 23, 2010 at 11:07:10AM +0100, Rudy Gevaert wrote:
This is a similar problem that was reported in #505440.
The DEVICE variable is leaked into the environment. The mdadm mkconf script
uses DEVICE when it is installing its config file.
In my case DEVICE is set by
Hello,
I'm packaging Doomsday Engine outside of Debian (and Ubuntu), but intent
to adapt the package in order to follow al (at least most) Debian Policy
Guidelines.
The current package:
$ apt-cache show deng
Package: deng
Version: 1.9.0-beta6.9-maverick-kees3
Architecture: amd64
Package: kde-full
Version: 5:64
Severity: normal
Sometimes when i click in the menu on Stop or Restart the computer , only the
windows appears with the message The computer will be stopped or restarted in
30 seconds nothing happen, if i want to to stop or restart the computer i
must open an
On Tue, 23 Nov 2010 11:33:29 +0100, Mehdi Dogguy wrote:
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=601971 . Now, it has
been found that that bug is not due to liboauth (see last comment on
that bug about the fact that twitter OAuth works). Its a problem with
bti, in which bti is
Hi!
* Hideki Yamane henr...@debian.or.jp [101123 07:13]:
I fixed this bug as below and test with piuparts is fine.
Please apply it, thanks.
[..]
--- autolog-0.40/debian/postrm2010-11-11 14:06:32.0 +0900
+++ autolog-0.40/debian/postrm2010-11-23 15:09:34.0
Source: 9base
Severity: wishlist
Tags: patch
Hi,
The armhf port has reached a very good state (at 87%) at debian-ports.org,
and I'm now mass-filing bug reports to packages for armhf support.
Most packages just have to add armhf in the architecture field. The complete
list is in
Package: apache2.2-common
Version: 2.2.16-4
Severity: wishlist
Tags: patch
Hello,
a2ensite (and a2dissite) currently handle the default site specially, calling
the resulting symlink 000-default so that it is loaded first. It would be nice
to do the same with the default-ssl site, calling the
Subject: gdbm fails to cross build using xdeb
Package: gdbm
Version: 1.8.3
Severity: wishlist
Some strips fail to recognize binaries of other architectures
Passing the correct strip for the target architecture, as in the patch below,
prevents this failure
---
diff -Nru gdbm-1.8.3/debian/rules
Hi,
On Tue, 23 Nov 2010 12:18:26 +0100
Alexander Reichle-Schmehl toli...@debian.org wrote:
I haven't checked it, but guessing that the PATH is set on purpose,
wouldn't a better (and less introsive) fix be, to add /sbin to PATH?
Its postrm script is simple one, so I think it wouldn't need to
Source: alsa-plugins
Severity: wishlist
Tags: patch
Hi,
The armhf port has reached a very good state (at 87%) at debian-ports.org,
and I'm now mass-filing bug reports to packages for armhf support.
Most packages just have to add armhf in the architecture field. The complete
list is in
Source: alsa-utils
Severity: wishlist
Tags: patch
Hi,
The armhf port has reached a very good state (at 87%) at debian-ports.org,
and I'm now mass-filing bug reports to packages for armhf support.
Most packages just have to add armhf in the architecture field. The complete
list is in
Source: alsa-tools
Severity: wishlist
Tags: patch
Hi,
The armhf port has reached a very good state (at 87%) at debian-ports.org,
and I'm now mass-filing bug reports to packages for armhf support.
Most packages just have to add armhf in the architecture field. The complete
list is in
Source: bip
Severity: wishlist
Tags: patch
Hi,
The armhf port has reached a very good state (at 87%) at debian-ports.org,
and I'm now mass-filing bug reports to packages for armhf support.
Most packages just have to add armhf in the architecture field. The complete
list is in
Source: ecore
Severity: wishlist
Tags: patch
Hi,
The armhf port has reached a very good state (at 87%) at debian-ports.org,
and I'm now mass-filing bug reports to packages for armhf support.
Most packages just have to add armhf in the architecture field. The complete
list is in
I have updated to 4.4.5 some time ago.
All has been fine in 4.4.4 and 4.4.5 until around 2 weeks ago, where this issue
appeared.
I keep my squeeze system updated almost daily.
I tried creating a new user, just to see if it is something on my user's
config, but the new clean user had the same
Source: ddccontrol
Severity: wishlist
Tags: patch
Hi,
The armhf port has reached a very good state (at 87%) at debian-ports.org,
and I'm now mass-filing bug reports to packages for armhf support.
Most packages just have to add armhf in the architecture field. The complete
list is in
Source: eql
Severity: wishlist
Tags: patch
Hi,
The armhf port has reached a very good state (at 87%) at debian-ports.org,
and I'm now mass-filing bug reports to packages for armhf support.
Most packages just have to add armhf in the architecture field. The complete
list is in
Source: ext3grep
Severity: wishlist
Tags: patch
Hi,
The armhf port has reached a very good state (at 87%) at debian-ports.org,
and I'm now mass-filing bug reports to packages for armhf support.
Most packages just have to add armhf in the architecture field. The complete
list is in
Thanks for the report Vincent.
I've added xen-devel to the CC as well as Cris Daniluk who previously
reported a very similar issue[0] also on an R410 -- Cris did you ever
get a resolution to your issue?
Vincent's full report is at:
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=603632
I've
Thank you for the patch. I was thinking of this.
Will Squeeze later move to a different kernel ? In that case, we should
put this in, though I don't know what the release team thinks of it.
On 11/23/2010 04:12 PM, Michael Prokop wrote:
* Michael Prokop m...@debian.org [Die Nov 23, 2010 at
Source: fbi
Severity: wishlist
Tags: patch
Hi,
The armhf port has reached a very good state (at 87%) at debian-ports.org,
and I'm now mass-filing bug reports to packages for armhf support.
Most packages just have to add armhf in the architecture field. The complete
list is in
On Tue, Nov 23, 2010 at 10:41:57AM +0100, Alexander Kurtz wrote:
The following bugs seem to be identical:
#601341
#602418
#604096
They all seem to be fixed by this kernel:
http://xenbits.xen.org/people/ianc/
I think it would be a good idea to
*) merge them all
*) assign to linux-2.6
Source: fenix
Severity: wishlist
Tags: patch
Hi,
The armhf port has reached a very good state (at 87%) at debian-ports.org,
and I'm now mass-filing bug reports to packages for armhf support.
Most packages just have to add armhf in the architecture field. The complete
list is in
Hello,
For reference: see archived bug #319419 on this ITP as well. Meanwhile,
the licensing has changed (all GPL now) so I'm continuing packaging.
Regards,
Kees
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact
Source: grib-api
Severity: wishlist
Tags: patch
Hi,
The armhf port has reached a very good state (at 87%) at debian-ports.org,
and I'm now mass-filing bug reports to packages for armhf support.
Most packages just have to add armhf in the architecture field. The complete
list is in
Source: gst-plugins-bad0.10
Severity: wishlist
Tags: patch
Hi,
The armhf port has reached a very good state (at 87%) at debian-ports.org,
and I'm now mass-filing bug reports to packages for armhf support.
Most packages just have to add armhf in the architecture field. The complete
list is in
This is a multi-part MIME message sent by reportbug.
Package: cpuburn
Version: 1.4-37
Severity: minor
The man page for the cpuburn collection of programs is missing essential
information necessary for using them. For example, it does not mention
that the programs print no error messages, or
On 23/11/2010 12:17, gregor herrmann wrote:
On Tue, 23 Nov 2010 11:33:29 +0100, Mehdi Dogguy wrote:
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=601971 . Now, it has
been found that that bug is not due to liboauth (see last comment on
that bug about the fact that twitter OAuth works).
Source: libgdiplus
Severity: wishlist
Tags: patch
Hi,
The armhf port has reached a very good state (at 87%) at debian-ports.org,
and I'm now mass-filing bug reports to packages for armhf support.
Most packages just have to add armhf in the architecture field. The complete
list is in
Package: sane
Version: 1.0.14-9
Severity: normal
Hi,
When I issue this command:
$ scanimage -d plustek:libusb:002:002 --resolution 200 -x 210 -y
297 --contrast 20%
I receive this error message:
scanimage: output is not a file, exiting
scanimage complains that the output is not a file.
Package: xserver-xorg
Version: 1:7.5+8
Severity: normal
When i boot system and login for first, after enter pop's password in evolution
X is crashed and tty changed to tty8,So i can't see X in tty7.I see same as
tty6 just with a few bad character in tty7.
after crashing, my problem is solving and
Hi,
$ find . -name *swf*
./jscripts/tiny_mce/plugins/media/img/flv_player.swf
./examples/media/sample.swf
How important are those files? Could those be replaced or removed without
affecting application functionality?
I found nothing about using the flv_player.swf in sources. Seems to be
AM == Adrian Mariano rad...@cox.net writes:
AM Thanks for your commend on GNU units.
Gentlemen, can you imagine that to get Taiwanese pings (坪), I had to
use Japanese tsubos!
AM Sounds like a terrible situation. The volunteers that work on
AM units comprise simply myself, and as I don't
Source: odyssey
Severity: wishlist
Tags: patch
Hi,
The armhf port has reached a very good state (at 87%) at debian-ports.org,
and I'm now mass-filing bug reports to packages for armhf support.
Most packages just have to add armhf in the architecture field. The complete
list is in
Hi !
This shows something about what's going wrong. Could you please try
adding 'debug' to the kernel parameters? That will show some more
context for these errors.
I booted 2.6.32-5 with the debug option on, and for comparison did the
same with 2.6.30-2.
The errors concerning the power
Source: scheme2c
Severity: wishlist
Tags: patch
Hi,
The armhf port has reached a very good state (at 87%) at debian-ports.org,
and I'm now mass-filing bug reports to packages for armhf support.
Most packages just have to add armhf in the architecture field. The complete
list is in
Package: xserver-xorg
Version: 1:7.5+8
Severity: normal
I forgot to say that when i enter wrong pop's password X doesn't crash, But
when i enter correctly, it crashed.
-- Package-specific info:
/var/lib/x11/X.roster does not exist.
/var/lib/x11/X.md5sum does not exist.
X server symlink
On Tuesday 23 November 2010 14:29:10 Jo Shields wrote:
Is this intended for Squeeze? With the deep freeze in effect, we're
avoiding making changes which aren't strictly for the benefit of the
release.
We can certainly start building for armhf in post-squeeze releases (and
experimental)
No
Source: nvramtool
Severity: wishlist
Tags: patch
Hi,
The armhf port has reached a very good state (at 87%) at debian-ports.org,
and I'm now mass-filing bug reports to packages for armhf support.
Most packages just have to add armhf in the architecture field. The complete
list is in
On Mon, 22 Nov 2010 21:00:20 +0100, Yves-Alexis Perez cor...@debian.org
wrote:
There was a could not remove /etc/kde3 directory, as not empty-like
line.
And are you sure it's now empty? :)
Yes... at least if rmdir hasn't started removing non-empty dirs over the
weekend ;)
I don't call
On Tue, 2010-11-23 at 15:15 +, Konstantinos Margaritis wrote:
Source: libgdiplus
Severity: wishlist
Tags: patch
Hi,
The armhf port has reached a very good state (at 87%) at debian-ports.org,
and I'm now mass-filing bug reports to packages for armhf support.
Most packages just have
Package: emacs22-common
Version: 22.2+2-5
I need to use Ange-FTP to access some remote files from Emacs. Therefore
I want to unload Tramp. I can do this interactively via
M-x tramp-unload-tramp
without problems. However, if I put
(tramp-unload-tramp)
into my .emacs, I get this message in the
Source: rinputd
Severity: wishlist
Tags: patch
Hi,
The armhf port has reached a very good state (at 87%) at debian-ports.org,
and I'm now mass-filing bug reports to packages for armhf support.
Most packages just have to add armhf in the architecture field. The complete
list is in
1 - 100 of 355 matches
Mail list logo
