.
On 20/10/2022 16:43, Andreas Beckmann wrote:
Control: reassign -1 nvidia-tesla-470-driver
Control: tag -1 upstream
On 20/10/2022 16.54, David Headland via pkg-nvidia-devel wrote:
Package: nvidia-tesla-450-driver
Version: 450.203.03-1
As per bug 981114, unfortunately the 470 driver does
Package: nvidia-tesla-450-driver
Version: 450.203.03-1
Followup-For: Bug #1014304
Dear Maintainer,
As per bug 981114, unfortunately the 470 driver does not work with my
hardware, whereas the 450 driver does - I have to switch monitors
regularly, and with anything newer than 450 this then causes
Control: forwarded -1
https://forums.developer.nvidia.com/t/fails-to-display-on-any-monitor-change-on-driver-455-and-460-reverting-to-450-things-work-again/167232/2
On 29/01/2021 13:16, Andreas Beckmann wrote:
Control: tag -1 upstream
Please check whether your issue is already reported in
Package: nvidia-driver
Version: 460.39-1
Followup-For: Bug #981114
Hi Andreas,
I was unable to find the packages at present, but I understand that they
do take a little while to filter through the system. However, the source
was available, and I had no problem using debuild to create the
Hi Andreas,
Thanks very much for the quick reply. I've given this a try as
requested: nvidia-tesla-450-driver and dependencies installed, then ran
"update-glx --config nvidia" and selected /usr/lib/nvidia/tesla-450 and
rebooted after it had recreated the initrd.
On reboot, I checked the X
Package: nvidia-driver
Followup-For: Bug #981114
Dear Maintainer,
As a comparison, please find below logs from driver 450 which is working
fine. Here, the system was booted and displayed fine. IT was left for
some time, DPMS kicked in from the display manager timing out, and was
re-woken at
Package: nvidia-driver
Version: 460.32.03-2
Severity: important
Dear Maintainer,
I'm having a problem that renders the nvidia driver versions 455 and 460
that have been available on Debian unusable to me. When installed, the
system usually boots up fine and appears to work until something
Hi Heinz,
Good question, as I've gone back to 450.80 for the moment and that's
working perfectly for me. I've checked through the logs for when I was
running 455, and it seems I had the same package versions as you, with
the exception of:
* libcuda1and
* libnvidia-ptxjitcompiler1
* nvidia-detect
> I have 455.23.04-1 from experimental installed since my last post,
> everything is stable, and clinfo and glxinfo report fully working OpenCL
> and GLX setups.
[...]
> Is there any reason you made a new nvidia 450 release instead of
> propagating the already working nvidia 455 experimental
Package: libgl1-mesa-dri
Version: 20.1.1-1
Followup-For: Bug #963824
Hello all,
I've also seen what I think is the same issue myself, but I'm using version
20.1.1-1 from testing rather than 20.1.2-1 from unstable. I can also add
mythfrontend to the list of affected programs.
Given that this
Package: udev
Version: 175-3.1
Followup-For: Bug #671859
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512
Just as a bit of extra information, I can confirm that within a matter
of minutes of re-starting udev, the high CPU usage starts all over
again. I'd guess it takes about two minutes, which
Package: udev
Version: 175-3.1
Severity: important
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512
Dear Maintainer,
This bug issue first came to light after upgrading the kernel from 3.0.1 to
3.3.4, both home-build versions from the kernel.org source. Switching back to
3.0.1 stops this
I have uploaded 0.5.1 to unstable. Is the bug still present in this
version?
No, it doesn't seem to. It's a bit difficult to say for sure as it's an
intermittent bug, but I've been using 0.5 from experimental for a week or so
and haven't seen it since installing that. I would certainly
Hello,
I've just read through this report again and have realised that it isn't
as clear as it could be, so thought I'd post a quick clarification.
The package specific information at the bottom of the report shows the
contents of /proc/asound/cards after I've commented out the line in
Package: alsa-base
Version: 1.0.23+dfsg-1
Severity: normal
Tags: sid
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512
Hello,
I have recently upgraded alsa-base and on reboot found that sound had
stopped working. On investigation, it looks like the fix that was applied
for bug #574593 has caused
Package: python-central
Version: 0.6.16
Severity: important
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512
Hello,
During a recent upgrade, python-central began failing with the following
information:
pycentral: pycentral cleanup-pkgprepare-updates: found 52 dangling symlinks
pycentral:
Package: roundcube
Version: 0.3.1-1
Severity: normal
Hello,
I've recently been trying to subscribe to a bug in the Debian bug tracking
system. After sending out the email to the subscribe address
567618-subscr...@bugs.debian.org, as usual a confirmation message is
received containing another
Package: roundcube
Version: 0.3.1-1
Severity: normal
Hello,
After using RoundCube for some time, I have noticed that occasionally it will
display IMAP messages in the message display pane rather than the message
itself. To illustrate this point, I've attached a screenshot of the problem
that
Hi Vincent,
There is some improvement in Roundcube 0.3.1 about cache
management. Could you check that it solves your problem? Please notice
that upstream disable cache by default from this release, so it could
fix your problem without really fixing it. Try with cache
Package: roundcube
Version: 0.3-2
Severity: minor
Hello,
I've got RoundCube configured with the After message delete/move display
the next message option enabled. Generally, this works well, but there is
a minor bug whereby sometimes the unready message count in the folders
pane becomes
Package: roundcube
Version: 0.3-2
Severity: minor
Hello,
I've just started using RoundCube as a webmail client for my IMAP mail. My
account is set up to check all folders for new mail (under Personal
Settings-Preferences-Mailbox view), which works perfectly for both manual
mail checks and
Package: freevo
Version: 1.8.3-1
Severity: normal
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512
Hello,
Firstly, apologies for the late reply. For some reason, I've not been
receiving copies of messages added to this bug, so I only noticed your
questions when I went to have a routine check of
Package: ivtv-utils
Version: 1.2.0-1
Severity: minor
Hello,
After recently purchasing a card supported by the IVTV driver, I've been
installing ivtv-utils and similar to get things up and running. Documentation
in ivtv-utils says (in file /usr/share/doc/ivtv-utils/README.Debian):
The IVTV
What do you have in /var/lib/chrony/chrony.drift? Have you tried deleting
that file?
Interesting. The file is actually /etc/chrony.drift on my system (Chrony on
this computer dates back a long time, possibly 8 years, and I've just not got
around to moving it). However, removing this file works
Could you run 'sudo chrony -d' and send me any messages it prints before it
crashes?
Certainly. I think they'll be in with the strace outputs, but difficult the
filter out from the output of strace. Output from 1.23-6 attached as requested.
All the best,
-Dave.
It appears that adjtimex() is being called with garbage instead of a valid
pointer to a timex structure.
Just as a bit of additional information, it appears that chronyd will
randomly die after starting without a connection from chronyc, but this
isn't easy to reproduce. The method I've already
Sorry for the delay in responding today. Since I've got a few things to do,
I'll put the responses together here. Unfortunately, I won't be around over
the next couple of days, but if you have any requests I'll get on to them as
soon as I can next week.
1) Where did you get your 2.6.27 kernel?
If there is anything else you'd like me to do, feel free to get in touch
and I'll try thing out as soon as possible.
Please run
strace chronyd -d
And send me the output.
Certainly. Please find the results log of this attached to this email. I'm
afraid I'm not experienced enough to
Please see if you can reproduce the bug running chronyd under strace like
this:
strace -eioctl chronyd -d
Not a problem at all. I redirected standard output and standard error to a
file, and have attached it to this message. Chronyd segfaulted at exactly the
same point (when burst was issued
Package: librapi2-tools
Followup-For: Bug #496107
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512
Hello,
I thoguht I'd post a quick note to say that the bug seems to be fixed in
librapi2-tools 0.13.1-1, so I'd be happy for this to be closed.
All the best,
- -Dave.
- -- System Information:
Package: librapi2-tools
Version: 0.13.1-1.dh1
Severity: wishlist
Tags: patch
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512
Hello,
After upgrading from librapi2-tools 0.11.1-2 to 0.13.1-1, quite a few scripts
that use synce-pcp have reported errors. I've tracked it down to scripts
that
Package: chrony
Version: 1.23-6
Severity: important
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512
Hello,
I've just noticed that one of my systems had its clock out of sync with
that of the timeserver. The timeserver is another Debian machine running
chrony (also version 1.23-6). On
Package: gdm-themes
Version: 0.6
Severity: normal
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512
Hello,
I've just run a routine upgrade of most of the packages on my systems, and
have now found that the GDM starts up and complains of a missing file,
/usr/share/gdm/themes/debblue/debblue.png.
Package: librapi2-tools
Version: 0.11.1-2
Followup-For: Bug #496107
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512
Hello,
Since reporting the bug originally, I've only been copying files from my
Linux PC to the mobile device, but I've recently needed to copy a file
the other way. It may be
Package: librapi2-tools
Version: 0.11.1-2
Severity: minor
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512
Hello,
I've noticed that just recently the data transfer rate calculation in
synce-pcp has become incorrect. I haven't been paying particularly close
attention, but I don't remember this
Package: libsane
Followup-For: Bug #474706
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512
Hello all,
I've managed to grab a few minutes to test libsane 1.0.19-15 with my
ScanJet 5300c this evening, and can report that scanning now works fine
for me without having to put the option
Hello all,
Yeah, probably as raw scanning works for me (tm) on my HP5300, HP7400,
and the 20++ Avision scanners I have over here.
Patches, especially for stuff I can not reproduce welcome.
Interesting, so it sounds like this is limited to a subset of ScanJet 5300
units - possibly ones of a
Package: libsane
Version: 1.0.19-11
Followup-For: Bug #474706
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512
Hello Bert,
I've recently acquired an HP ScanJet5300c scanner myself, and ran into
pretty much exactly the same problem. However, after some fiddling
around with
Package: libsane
Version: 1.0.19-11
Followup-For: Bug #485852
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512
Hello again,
I've been doing a bit more playing around recently, and can confirm that
the bug seems to be completely reproducible as I described it yesterday.
I've not been able to
Package: libsane
Version: 1.0.19-11
Severity: normal
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512
Hello all,
Background paragraph:
I've recently acquired a second hand HP ScanJet 5300c to replace my now
broken ScanJet 6100c, and first of all ran into the same problems as bug
#474706. After
Package: i8kutils
Followup-For: Bug #480938
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512
Hello!
I've just tried building the package for AMD64, just changing the
architecture line in the control file, and the file does indeed build
successfully on AMD64. More than that, although I've only
Package: freevo
Version: 1.8.1-0
Followup-For: Bug #478574
Hello all,
This is a quick update to record that the bug still exists in
freevo-1.8.1-0. If anyone would like any further information, let me
know and I'll get it sorted out as soon as possible.
All the best,
-Dave.
-- System
Package: acpid
Followup-For: Bug #443411
Hello, Dietz,
I've recently spotted a bug in acpid, which I've reported and has been
assigned bug #483805. The problem is not exactly the same as your bug
#443411, but having read it through again I'm wondering if it might in
fact be a different symptom
Hello all,
I don't know quite why I didn't think of this before, but this may well be
a problem with the new QT packages, as has been seen in lyx (see bug
#475523 for details). Unfortunately I'm at work at present and don't have
access to my Debian machines, but I will try changing the libraries
Hello again, all,
I will try changing the libraries around this evening and report whether
this is successful or not.
Unfortunately, the adding libraries trick doesn't seem to be doing anything
useful for me. I'm afraid I'm not in a position where I can easily revert to
QT version 4.3 on any
Hello,
I have been keeping an eye on things as I've been upgrading packages since
reporting this bug, and I can now say that with nvidia-glx 169.07-1 and gimp
2.4.3-1, the X server no longer crashes, so from my point of view I'd be happy
for this bug to be closed. As before, though, if I can
Package: gimp
Version: 2.4.1-1
Followup-For: Bug #445445
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512
Hi Ari,
In answer to your questions, I'm using enlightenment as my window
manager (specifically Debian package enlightenment 1:0.16.7.2-5), and
not fluxbox (though that was a good guess).
Package: gimp
Version: 2.4.0-1
Followup-For: Bug #445445
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512
Hello,
Sorry it's taken a while, but I've finally been able to test the new
version, and I can confirm that the bug still exists with exactly the
same symptoms - may I suggest that the bug
Package: geotoad
Version: 3.9.0-5
Severity: normal
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512
Hello,
I've just been trying to run geotoad to create a GPX file, and it's
crashing consistently reporting problems in
/usr/share/geotoad/lib/filter.rb. I've tried a few different zipcode
searches
Um, please don't attach such large images to bug reports in the future.
I don't need a copy of a successful screenshot, and especially not in a
format like XCF which does not compress well compared to, say, PNG. I
also don't need a 200 KB XCF (650 KB uncompressed) of a competely blank
image
Package: nvidia-glx
Version: 100.14.19-1
Severity: important
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512
Hello,
I'm running an AMD^4 2.6.22.9 kernel with the nvidia driver compiled
from nvidia-kernel-source 100.14.19-1, and have experienced consistent
repeatable segfaults of the X server
Package: icedove
Followup-For: Bug #409000
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512
Hello,
I've just updated to icedove 2.0.0.0-4 for AMD64 as is present in Sid
at the moment, and can confirm that this bug is no longer present. It
looks like there are still three architectures without
Package: icedove
Version: 2.0.0.0-4
Followup-For: Bug #409001
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512
Hello,
This bug appears to be partially fixed in 2.0.0.0-4. Now, the message
displays properly when re-opened (ie there is no difference in the
display when the message is opened from
Package: icedove
Version: 2.0.0.0-4
Severity: minor
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512
Hello,
I notice that after upgrading to Icedove 2.0.0.0-4, the User-Agent
header on messages composed now refers to Thunderbird rather than
Icedove. I'm not sure that this is intentional or not
Package: nvidia-kernel-source
Version: 1.0.8776-4
Followup-For: Bug #416594
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512
Hello all,
I can confirm that I've also experienced this problem with
nvidia-kernel-source package version 1.0.8776-4. I've got a slightly
different configuration to the
Package: dosfstools
Version: 2.11-2.1
Severity: minor
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512
Hello,
I believe that the map page for mkdosfs is out of date. For the -F
option, it specifies that FAT-32 will not be selected automatically, and
will always need to be specified if desired.
Package: gweled
Version: 0.6-2
Severity: wishlist
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512
Hello,
I notice that there is a new version of gweled on release:
http://sebdelestaing.free.fr/gweled/
It'd be nice to get that versions packaged up for Debian at some point -
I suspect many
Package: gweled
Version: 0.6-2
Severity: important
Tags: patch
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512
Hello,
On one of my systems (AMD64 unstable), gweled starts but displays a
blank window. No menu options work, and the game is completely unusable.
This has been the case for some
Hello all,
The behaviour of fuser is correct (it works on the filesystem level,
while bind mounts are pure namespace operations only). But the effect
is that the 'fuser' call in umountnfs.sh line 98 just kills
/etc/init.d/rc because it thinks it is using the bind-mounted
location when in
Package: mozilla-nukeimage
Version: 0.3-5
Severity: important
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512
Hello,
I believe the dependancy information is incorrect for the
mozilla-nukeimage package in sid/AMD64 at the moment. The package is
currently installed on my system, but is not
Package: mozilla-thunderbird
Version: 1.0.6-3
Severity: normal
I've recently upgraded from mozilla-tunderbird 1.0.2-3 to 1.0.6-3, and
have noticed that with the new version, under certain conditions,
displaying the second HTML message after starting, Mozilla Thunderbird
will segfault.
I've not
Package: mozilla-thunderbird
Version: 1.0.6-3
Severity: normal
I have a configuration where I have multiple RSS feeds from the BBC
accessable from within a single folder in Thunderbird. I also have
another RSS feed put in its own folder from Plusnet Usertools. When
trying to manage subscriptions
62 matches
Mail list logo
