Bug#1063660: (no subject)

saber716rus@BOM-WXX9 ~> apt list -a firmware-amd-graphics List output… Done firmware-amd-graphics/stable,now 20230210-5 all [installed] firmware-amd-graphics/unknown 20210818-1 all saber716rus@BOM-WXX9 ~>

Bug#1063660: (no subject)

made inxi -Fazy saber716rus@BOM-WXX9 ~> inxi -Fazy System:   Kernel: 6.1.0-18-amd64 arch: x86_64 bits: 64 compiler: gcc v: 12.2.0     parameters: BOOT_IMAGE=/@/boot/vmlinuz-6.1.0-18-amd64     root=UUID=32078b24-77ba-488f-81e3-c6d23b04f161 ro rootflags=subvol=@ quiet     splash   Desktop:

Bug#1049378: (no subject)

I recently got a bug, but a similar one was discovered six months ago. https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1063660

Bug#1063660: (no subject)

I found a bug similar to mine, but the problem is visible when you update the kernel. This bug was discovered six months ago, but has not yet been resolved. https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1049378 saber716rus@BOM-WXX9 ~> apt list -a amd64-microcode List output…

Bug#1063660: the amdgpu module is missing from the kernel

Package: linux-image-amd64 Version: 6.1.76-1 update-initramfs: Generating /boot/initrd.img-6.1.0-18-amd64 W: Possible missing firmware /lib/firmware/amdgpu/ip_discovery.bin for module amdgpu W: Possible missing firmware /lib/firmware/amdgpu/vega10_cap.bin for module amdgpu W: Possible missing

Bug#1053994: the es8316 module does not work on the huawei mate d15 laptop

yes, I will try to build with this parameter. And there is also an alsa regression and a workaround so far https://github.com/codepayne/linux-sound-huawei/issues/26#issuecomment-1837502247 20 декабря 2023 г. 20:40:30 GMT+03:00, Diederik de Haas пишет: >On woensdag 20 december 2023 18:25:38

Bug#1053994: the es8316 module does not work on the huawei mate d15 laptop

also, the kernel should be built with this parameter of the kernel config CONFIG_SND_SOC_AMD_LEGACY_MACH=m 20 декабря 2023 г. 20:07:31 GMT+03:00, Diederik de Haas пишет: >On Wednesday, 20 December 2023 17:20:18 CET Nikolay Sabelnikov wrote: >> I also got a bug. I tried it on the 6.7

Bug#1053994: the es8316 module does not work on the huawei mate d15 laptop

from the upstream core. 20 декабря 2023 г. 20:07:31 GMT+03:00, Diederik de Haas пишет: >On Wednesday, 20 December 2023 17:20:18 CET Nikolay Sabelnikov wrote: >> I also got a bug. I tried it on the 6.7-rc6 core. in my case, the sound did >> not work. >> >> https:/

Bug#1053994: kernel patch

you can certainly consider it as a patch of the current kernel. https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git/commit/?id=c95a2a0be0b1bba2e051faa105c2e0401fc2de33

Bug#1053994: the es8316 module does not work on the huawei mate d15 laptop

https://bugzilla.kernel.org/show_bug.cgi?id=218085 >Control: tag -1 upstream > >On Sunday, 29 October 2023 19:03:30 CET Николай wrote: >> https://bugzilla.kernel.org/show_bug.cgi?id=218085 > >updating metadata accordingly > >On Monday, 18 December 2023 07:25:54 CET Nikolay S

Bug#1058950: Target Threads::Threads not found by CMake

Package: libnanoflann-dev Version: 1.5.3+ds-1 Severity: normal cmake version 3.27.9-1, gcc (Debian 13.2.0-7) Step to reproduce: Add line target_link_libraries(my_shiny_program PRIVATE nanoflann::nanoflann) into CMakeLists.txt Actual behaviour: CMake Error at

Bug#1053994: the es8316 module does not work on the huawei mate d15 laptop

upstream > >On Sunday, 29 October 2023 19:03:30 CET Николай wrote: >> https://bugzilla.kernel.org/show_bug.cgi?id=218085 > >updating metadata accordingly > >On Monday, 18 December 2023 07:25:54 CET Nikolay Sabelnikov wrote: >> It looks like there is a solution. >> https

Bug#1053994: the es8316 module does not work on the huawei mate d15 laptop

upstream > >On Sunday, 29 October 2023 19:03:30 CET Николай wrote: >> https://bugzilla.kernel.org/show_bug.cgi?id=218085 > >updating metadata accordingly > >On Monday, 18 December 2023 07:25:54 CET Nikolay Sabelnikov wrote: >> It looks like there is a solution. >> https://b

Bug#1053994: A solution has appeared

hello. It looks like there is a solution. https://bugzilla.kernel.org/show_bug.cgi?id=215119#c52 it is necessary to assemble this core. and try it out.

Bug#1055763: QXL VGA does not work

Package: qemu-system-x86 Version: 8.1.2+ds-1 Severity: normal Steps to reproduce: $ qemu-system-x86_64 -vga help none no graphic card std standard VGA (default) cirrus Cirrus VGA vmware VMWare SVGA qemu-system-x86_64: type is NULL

Bug#1052134: Acknowledgement (error 400 when logging in via OAth2 in yandex mail.)

the problem seems to have gone away. Maybe it's the connection. The way Roskomnadzor often blocks IP addresses in our country. Because of this, the Internet connection to the service may be disrupted. You can close the bug. 18 сентября 2023 г. 00:15:04 GMT+03:00, Debian Bug Tracking System

Bug#1052125: nala cannot install the debreate package

hello. thank you for responding quickly. Then with your permission, I will create a bug in their Git with a reference to this bug. 18 сентября 2023 г. 05:31:47 GMT+03:00, Blake Lee пишет: >I was able to reproduce this on my system. First this is the error that >happens when installing. This

Bug#1052134: error 400 when logging in via OAth2 in yandex mail.

Package: thunderbird Version: 1:102.15.1-1~deb12u1Package: thunderbird Version: 1:102.15.1-1~deb12u1 ПРЕДУПРЕЖДЕНИЕ: Это содержит секретную информацию, которую не следует пересылать или публиковать без

Bug#1052125: nala cannot install the debreate package

Package: nala Version: 0.12.2 saber716rus@BOM-WXX9 ~/Загрузки> sudo nala install debreate_0.8-dev9_all.deb Уведломение: The following will be installed to satisfy debreate: python3-pip

Bug#1051854: sudo chroot green linux/chroot/ chroot: failed to execute command "/usr/bin/fish": No such file or directory

Package: fish Version: 3.6.0-3.1 in ubuntu, this command works

Bug#1051765: dummy audio output on a huawei mate d15 laptop

Package: alsa-ucm-conf Package: kernel Package: firmware-sof-signed On huawei mate d15 laptops, there is a problem with the sound output to the speakers or connector, and a dummy sound is written in the settings. I tried to edit the configs of the alsa package, but without success. And this

Bug#1051682: Repository "http://ftp.ru.debian.org/debian bookworm-security Release" does not contain a Release file.

Package: apt Version: 2.6.1 saber716rus@debian:~$ su - Password: root@debian:~# apt update Entity:1 http://ftp.ru.debian.org/debian bookworm InRelease Ign:2 http://ftp.ru.debian.org/debian bookworm-security InRelease Sushch:3 http://mirror.cloudhosting.lv/debian bookworm InRelease Sushch:4

Bug#1051631: samba package dependencies are broken

Package: samba Version: 2:4.17.9+dsfg-0+deb12u3 root@debian:-# apt install samba Reading package lists… The dependency tree is ready to be built... The state information is ready to be read… Done Some packages cannot be installed. Perhaps what you are asking is not feasible, or you are using

Bug#1050292: partitioning a btrfs partition into btrfs sub-volumes

Package: calamares Version: 3.2.61-1+b1 Hello, dear maintainers! I raised this issue in the calamares upstream. The lack of partitioning of the btrfs partition into sub-volumes concerns not only debian, but also other distributions using calamares.

Bug#1050173: setting a zero password per user during installation

On Mon, 21 Aug 2023 15:02:39 +0300 Nikolay Sabelnikov <79625490...@yandex.ru> wrote: > Package: calamaris > Version: 3.2.61-1+b1 > > during installation, I noticed that it is impossible to set a null password > for the user. > > > sorry I sent it to the wrong package. You can close the bug.

Bug#1050291: the ability to set a zero password for the user

Package: Calamares Version: 3.2.61-1+b1 Hello. Dear maintainers! please add the possibility of creating a user without a password or a null password.

Bug#1050173: setting a zero password per user during installation

Package: calamaris Version: 3.2.61-1+b1 during installation, I noticed that it is impossible to set a null password for the user.

Bug#1039898: mod-qos can not be enabled correctly for apache2 in Debian 12

of /etc/apache2/mods-enabled/qos.load: Cannot load /usr/lib/apache2/modules/mod_qos.so into server: /usr/lib/apache2/modules/mod_qos.so: undefined symbol: pcre_free Processing triggers for libc-bin (2.36-9) ... -- Best regards, Nikolay Dikhtyar

Bug#978932: sympa: webinterface broken after installing 6.2.40~dfsg-1+deb10u1

. -- Nikolay Shaplov aka Nataraj Fuzzing Engineer at Postgres Professional Matrix IM: @dhyan:nataraj.su

Bug#1031809: Bump webp-pixbuf-loader version to 0.1.2 as it contains important bugfixes

> PRE-RELEASE Ok, consider version 0.2.0 then. > on a closer look this looks like a wishlist Clearly, I **wish** that default image viewer (LXDE) didn't eat all my memory when I just want to scroll through webp images. Is there a "freeze" now? When it ends? On Thu, Feb 23, 2023 at 9:41 PM Andrey

Bug#1031809: Bump webp-pixbuf-loader version to 0.1.2 as it contains important bugfixes

Package: webp-pixbuf-loader Version: 0.0.5-5 Severity: serious Steps to reproduce: 1. Install gpicview. 2. Skip through webp images (cycling between 2 is sufficient) and monitor its RAM consumption. 3. Consider updating to latest tag https://github.com/aruiz/webp-pixbuf-loader/releases

Bug#1006947: matrix-synapse: synapse_port_db ignores options from /etc/matrix-synapse/conf.d/

Package: matrix-synapse Version: 1.53.0-1~bpo11+1 Severity: normal X-Debbugs-Cc: dh...@nataraj.su On debian bullseye I install matrix-synapse as usual: sudo apt-get install python3-frozendict/bullseye-backports sudo apt-get install matrix-synapse/bullseye-backports and then trying to upgrade

Bug#1004501: kernel: BUG: unable to handle page fault (RIP drm_stub_open)

Package: nvidia-legacy-340xx-kernel-dkms Version: 340.108-12 Severity: important Steps to reproduce on xfce desktop: 1. Boot, load and unload nvidia driver kernel module (in my case the stack is optirun+bbswitch-dkms+nvidia driver); 2. Run xflock4. So: $ optirun mpv --version && sleep 1 ; xflock4

Bug#990347: bear: Missing libraries for /usr/bin/intercept

Package: bear Version: 3.0.8-1 Severity: important X-Debbugs-Cc: deb...@hmel.org Dear Maintainer, The bear package is unusable in bullseye because of missing dependencies for /usr/bin/intercept. Running 'bear -- make' for a project results in /usr/bin/intercept: error while loading shared

Bug#990101: clang-11: Problem building mixed C & C++ code with UBSan sanitizer

Package: clang-11 Version: 1:11.0.1-2~bpo10+1 Severity: normal If I have a mixed C/C++ code with classes with virtual function in it, and I am trying to build it with BUSan with -fno-sanitize-recover=undefined option, then I get undefined reference error messages

Bug#960283: npm says 'pathArray is not defined' when I try to use it from buster-backports

В письме от среда, 13 мая 2020 г. 12:40:25 MSK пользователь Christian Motschke написал: > I found your Bug report and had the same error. I fixed it for me. You have > to edit the file /usr/lib/nodejs/dot-prop/index.js and replace 3 > occurrences of > > if (pathArray.length === 0) { > > with >

Bug#960289: npm: 'Permission denied' error when running as root

В письме от понедельник, 11 мая 2020 г. 17:51:27 MSK пользователь Jérémy Lal написал: > > > > # cd /srv > > > > # npm install matrix-appservice-irc --global > > > > > > You are running an untrusted module as root. > > > I strongly advise against that. > > > > I am _installing_ untrusted module

Bug#960289: npm: 'Permission denied' error when running as root

В письме от понедельник, 11 мая 2020 г. 17:19:07 MSK пользователь Jérémy Lal написал: > > # cd /srv > > # npm install matrix-appservice-irc --global > > You are running an untrusted module as root. > I strongly advise against that. I am _installing_ untrusted module as root. Am I not? > I

Bug#960284: [Pkg-javascript-devel] Bug#960284: npm tries to use git, but git is not listed in dependencies

В письме от понедельник, 11 мая 2020 г. 16:40:31 MSK пользователь Jérémy Lal написал: > > I am following some HOWTO guide and run > > > > # npm install matrix-appservice-irc --global > > > > and it fails because git is missing > > > > ../.. > > > > I guess getting sources using git is a

Bug#960289: npm: 'Permission denied' error when running as root

Package: npm Version: 5.8.0+ds6-4+deb10u1 Severity: normal I am still trying to run npm. When I manually set up git, I came to the next problem: I run as a root # cd /srv # npm install matrix-appservice-irc --global and get npm WARN npm npm does not support Node.js v10.19.0 npm WARN npm You

Bug#960284: npm tries to use git, but git is not listed in dependencies

Package: npm Version: 5.8.0+ds6-4+deb10u1 Severity: normal I am following some HOWTO guide and run # npm install matrix-appservice-irc --global and it fails because git is missing npm WARN npm npm does not support Node.js v10.19.0 npm WARN npm You should probably upgrade to a newer version of

Bug#960283: npm says 'pathArray is not defined' when I try to use it from buster-backports

Package: npm Version: 6.14.3+ds-1~bpo10+1 Severity: normal Hi! I tried to use npm from buster-backports. Actually I wanted to report another bug, but desided to check if it is fixed in backports. But found a new one. So I am running a command # npm install matrix-appservice-irc --global and

Bug#960106: matrix-synapse: synapse_port_db script does not know about /etc/matrix-synapse/conf.d

Package: matrix-synapse Version: 1.12.3-1~bpo10+1 Severity: normal Hi! I am migrating synaps from sqlite into postgres, using upstream manual: https://github.com/matrix-org/synapse/blob/master/docs/postgres.md When I ran synapse_port_db script /usr/bin/synapse_port_db --sqlite-database

Bug#933973: general: System totally freeze all the time (Debian 10)

Package: general Severity: important Dear Maintainer, *** Reporter, please consider answering these questions, where appropriate *** * What led up to the situation? I don't know! This happens every day by different reasons. * What exactly did you do (or not do) that was effective (or

Bug#878340: libmariadbclient-dev-compat: mysqlclient.pc is not visible to pkg-config

Debian developers to push patches through the system, there aren't any high hopes for external contributors like me). Thank you for making Debian a great distibution. Happy New Year! Kind regards, Nikolay Dimitrov (A happy Debian user since 2003) On 1/6/19 8:01 PM, Otto Kekäläinen wrote: Hello

Bug#856657: I have this issue too

I have this issue during installatiuon of gnote app. It installs fine from console though.

Bug#846935: inadyn: New upstream release available, v2.1

​Hello. Is there any chance that inadyn will be updated? On Sun, 04 Dec 2016 14:15:18 +0100 Joachim Nilsson wrote: > Package: inadyn > Version: 1.99.4-1 > Severity: wishlist > > Dear Maintainer, > > the Inadyn upstream project has released quite a few new > releases since

Bug#860915: cloud-initramfs-tools: Please re-enable generation of the overlayroot package

Dear Maintainer, I'm experimenting with overlayroot package in the VirtualBox, Debian 9 (4.9.82-1+deb9u3). I was able to make it work for me using this solution: https://yulistic.gitlab.io/2016/05/overlayroot-not-work i ng-with-custom-kerne l/

Bug#878340: libmariadbclient-dev-compat: mysqlclient.pc is not visible to pkg-config

ect the package: $ pkg-config --cflags mysqlclient -I/usr/include/mysql -I/usr/include/mysql/.. Can you please double-check whether mysqlclient.pc is installed at the proper path? Kind regards, Nikolay Dimitrov -- System Information: Debian Release: 9.2 APT prefers stable-updates APT policy: (

Bug#861743: posh: set -u prevents using empty argument list

Package: posh Version: 0.12.6 When posh is run with `set -u` and empty argument list it fails on trying to use $@: ``` % posh -u -c 'echo "$@"' posh: @: parameter not set ``` Dash, busybox ash, zsh, bash, mksh and ksh work fine in this case. Workaround with explicit `test $#` works, but is

Bug#846558: transgui: I'd like to have transmission-remote-gui alias for this package

Package: transgui Version: 5.0.1-1 Severity: wishlist Hi! I've been using transmission for may yeas. I was really missing something like transgui, but I did not know that it exists in debian repo because I was expecting that it will have hame starting with transmission-* Now I found transgui

Bug#818939: freedict-deu-eng: Korollar: m -> n

> Please change the gender of "Korollar" from masculine to neutral: > "Korollar {m}" -> "Korollar {n}". > > Reasons: > http://www.duden.de/rechtschreibung/Korollar > http://www.wissen.de/search?keyword=Korollar > > The upstream maintainer is probably also in "To:". I've checked freedict

Bug#819075: pgbouncer does not start on my Debian Jessie, but sais that starting is OK

Package: pgbouncer Version: 1.5.4-6+deb8u1 Severity: important I am trying to run pgbouncer in Debian Jessie (in lxc container if it is important) I've installed pgbouncer package, and started the service, it said everything is ok: $ sudo /etc/init.d/pgbouncer start [ ok ] Starting

Bug#819065: reportbug crashes with "UnicodeDecodeError" when reporting bug for cretain package

are publicly archived (including the email address of the submitter). Detected character set: UTF-8 Please change your locale if this is incorrect. Using 'Nikolay Shaplov <dh...@nataraj.su>' as your from address. Getting status for pgbouncer... Checking for newer versions at madison, incoming.debi

Bug#767798: Workaround from pkg-systemd-maintainers

I've asked pkg-systemd-maintainers about this issue and Yuriy M. Kaminskiy offered workaround: mkdir /etc/systemd/system/bind9.service.d echo "[Service]\nExecStart=\nExecStart=/usr/sbin/named -4 -f -u bind" > /etc/systemd/system/bind9.service.d/local.conf systemctl reenable bind9.service

Bug#767798: bind9: ignores OPTIONS from /etc/default/bind9 w/ systemd

I also confirm this bug. More over I would suggest to raise this bug to an important. Whenever user tries to use bind9 as recursive dns (i think it is about a half of use cases) and when that user have only IPv4 connection (i think it is 90% of use cases now) user will get a lot of network

Bug#815152: k3b still cannot be installed in Unstable because of systemd dependency

Package: k3b Severity: important Dear Maintainer, .. The following packages have unmet dependencies: k3b : Depends: udisks2 but it is not going to be installed E: Unable to correct problems, you have held broken packages. root@bender2:~# apt-get install udisks2 Reading package lists...

Bug#794686: nslcd start script does not report starting failure

This bug was not fixed for debian jessie, as I can see... And I think it should be fixed in all supported distributives, as it can cause problems.

Bug#805655: [pkg-wine-party] Bug#805655: wine-development: FTBFS on hurd-i386

On 21.11.2015 20:16, Michael Gilbert wrote: On Sat, Nov 21, 2015 at 11:47 AM, Svante Signell wrote: Signed-off by: svante.sign...@gmail.com Hello, Submitting this patch directly to wine-patches on request from Jens Ryer. BTW: There are still some parts of the code using PATH_MAX, but does

Bug#796810: chromium: Display problem of drop-down menus

Package: chromium Version: 37.0.2062.120-1~deb7u1 Severity: important Chrome Version (from the about:version page): 37.0.2062.120 Is this the most recent version: no OS + version: 7 CPU architecture (32-bit / 64-bit): 64 Window manager: URLs (if relevant): Behavior in Linux Firefox: no bug in

Bug#640774: Stopping nslcd no longer

engineer GPG KeyID: 0xEDDDA1B7 GPG Fingerprint: 8206 A196 2084 7E6D 0DF8 B176 BC19 6A94 EDDD A1B7 -- Nikolay Shaplov Postgres Professional: http://www.postgrespro.com Russian Postgres Company -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe

Bug#794686: nslcd start script does not report starting failure

Package: nslcd Version: 0.9.4-3 Severity: serious Justification: fails to build from source Script that starts nslcd service does not make sure that service started successfully. For example, lets spoil nslcd config file: add a comment at the end of the /etc/nslcd.conf file without newline

Bug#783106: lxc container does not start automatically

В письме от 30 апреля 2015 08:50:04 пользователь Guido Günther написал: On Wed, Apr 29, 2015 at 06:53:59PM +0300, Nikolay Shaplov wrote: В письме от 29 апреля 2015 08:01:24 пользователь Daniel Baumann написал: Hi, could you reproduce it without libvirt? I've commented out all

Bug#783106: lxc container does not start automatically

В письме от 29 апреля 2015 08:01:24 пользователь Daniel Baumann написал: Hi, could you reproduce it without libvirt? I've commented out all lxc.network.* options, and container started successfully on reboot. But I still think this is a bug. Because 1. It does not give any reasonable

Bug#783106: lxc container does not start automatically

В письме от 22 апреля 2015 11:42:58 Вы написали: tag 783106 unreproducible tag 783106 moreinfo severity 783106 minor thanks On 04/22/15 11:25, Nikolay Shaplov wrote: Apr 22 11:59:12 nataraj-pgpro lxc-autostart-helper[974]: Starting LXC autoboot containers: :Error starting container

Bug#783106: lxc container does not start automatically

Package: lxc Version: 1:1.0.6-6 Severity: normal https://wiki.debian.org/LXC#Debian_8_.22Jessie.22.2Ftesting I've added lxc.start.auto = 1 into /var/lib/lxc/pgbuild/config as I did on ubuntu but my container does not start on reboot # lxc-ls -f NAME STATEIPV4 IPV6 AUTOSTART

Bug#783106: lxc container does not start automatically

В письме от 22 апреля 2015 12:48:00 пользователь Daniel Baumann написал: On 04/22/15 11:57, Nikolay Shaplov wrote: i suggest you look into this, probably your container needs something in its config that you haven't got ready by the time lxc-autostart runs. Thank you, captain obvious

Bug#780621: xsane: Not enough space in root partition: xsane gives broken images but

Package: xsane Version: 0.999-2 Severity: normal Dear Maintainer, please reopen bug https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=550659 I've just checked with xsane 0.999-2 and the bug is still there === xsane release 0.999-1 now in unstable. Please can you

Bug#704087: suffering this in wheezy

Hi! Can you please tell what is the current status of this bug now? Are there any ways to prevent automatic upgrade to jessie when jessie is released? What unattended-upgrades will really do if jessie is not listed in /etc/apt/sources.list ? Just stops upgrading or what? I'm little bit

Bug#772845: freetuxtv: package keeps crushing at startup screen while performing all channels syncronization.

Package: freetuxtv Version: 0.6.6~dfsg1-1 Severity: important Dear Maintainer, *** Reporter, please consider answering these questions, where appropriate *** * What led up to the situation? * What exactly did you do (or not do) that was effective (or ineffective)? * What was the

Bug#770433: ksnapshot crashes if drag image over chromium window

Package: ksnapshot Version: 4:4.12.2-2 Severity: normal Dear Maintainer, If I drag an image from ksnapshot over a chromium window (I do not even should drop it) ksnapshot will crash. If this but is not reproducible for you, I can make a backtrace. But I think it hould be 100% reproducible

Bug#766187: runit: Fails to install runit after fresh install of jessie beta2

Package: runit Version: 2.1.2-1 Severity: important Dear Maintainer, Fresh minimal install of Jessie Beta2 with only SSH server selected in tasksel. Tried to install runit with 'apt-get install runit' and apt-get exits with error message of missing /etc/inittab and leaves it unconfigured. My

Bug#754461: xfce4-orageclock-plugin: zombie process when exiting orage

Package: xfce4-orageclock-plugin Version: orage Severity: normal When clicking on the systray the orage calendar appears. When you select exit from the calender the process becomes a zombie. Every time this happens a new zombie process is created. 23204 ?Z 0:00 [orage] defunct 23205

Bug#750689: chromium-browser: Strange and specific Chrome and Chromium problems, involving GNOME 3 as well

Package: chromium-browser Severity: normal Today I opened Google Chrome and tried to play a video literaly seconds after the system boot and GNOME was maybe still initially loading in background. Then the whole system froze up for 2-3 seconds, then the video started playing and evereything seemed

Bug#749709: general: USB mouse lag, while PS2 mouse is OK

Package: general Severity: important I am getting occasional mouse lags (like seconds-lasting freezes) when running Debian Wheezy stable with default (Gnome 3 shell GUI). The mouse cursor just stays on one place for a second and after that moves to where I have pointed it. Same thing happened to

Bug#748915: Regarding bug

Problem was solved: http://forums.debian.net/viewtopic.php?f=7t=114603#p541535

Bug#748915: pulseaudio: Microphone input is crackling in skype and sound record program. Output is OK.

Package: pulseaudio Version: 2.0-6.1 Severity: important * What led up to the situation? Using micropohone. * What exactly did you do (or not do) that was effective (or ineffective)? I tried: modifying pulseuadio default.pa and daemon.conf files and even updating the kernel to 3.13

Bug#742681: curl stuck on some https urls

Package: curl Version: 7.35.0-1 Severity: normal Dear Maintainer, curl -v https://sm.megafon.ru * Rebuilt URL to: https://sm.megafon.ru/ * Hostname was NOT found in DNS cache * Trying 193.201.231.60... * Connected to sm.megafon.ru (193.201.231.60) port 443 (#0) * successfully set certificate

Bug#738955: goldendict: Goldendict works incorrectly after dictd dictionary update

Package: goldendict Version: 1.5.0~git20131003-1 Severity: normal Goldendict works incorrectly after dictd dictionary update 1. remove ~/.goldendict 2. install dict-freedict-eng-rus package from stable http://ftp.us.debian.org/debian/pool/main/f/freedict/dict-freedict-eng-rus_1.3-4_all.deb 3.

Bug#738715: [debian-freedict] Bug#738715: Bug#738715: Bug#738715: dict-freedict-eng-rus: GoldenDict does not show requested article (at least for dict-freedict-eng-rus 2013.11.30-1)

On Thursday 13 February 2014 11:34:20 Sebastian Humenda wrote: Hello again, sorry, I've used the wrong dict-freedict-eng-rus database, due to problems on my unstable system. When installing eng-rus, dictd even stops working. So it seems to be indeed something serious. I'll have a look.

Bug#738968: dict-freedict-eng-rus: GoldenDict seems to use 00-database-short as dictionary name, and it is missing

Package: dict-freedict-eng-rus Version: 2013.11.30-1 Severity: normal GoldenDict does not properly show Dictionary Name in it's interface. As far as I can get, it uses 00-database-short header from dict file. In dict-freedict-eng-rus_1.3-4 this header exists, and name is shown well, but in

Bug#738715: dict-freedict-eng-rus: GoldenDict does not show requested article (at least for dict-freedict-eng-rus 2013.11.30-1)

Package: dict-freedict-eng-rus Version: 2013.11.30-1 Severity: important I've installed dict-freedict-eng-rus 2013.11.30-1 from unstable and tried to use is through GoldenDict. But it does not work. It always shows wrong article (not the article I've typed in search input field). For example

Bug#736512: alsa-base: Creative Labs CA0106 Soundblaster captures broken audio, unless same program is using any alsa device for playback

Package: alsa-base Version: 1.0.25+3~deb7u1 Severity: normal Dear Maintainer, I have Creative Labs CA0106 Soundblaster (PCI: 1102:0007, snd-ca0106) And it does not work properly on audio capture in a very strange way: Ones I try to capture some sound it gives me a result broken in a way shown

Bug#718805: Re: Re: Re: Bug#718805: /usr/bin/avconv: avconv cannot grab video4linux2 device

) +return INT64_MIN; if(a0 a != INT64_MIN) return -av_rescale_rnd(-a, b, c, rnd ^ ((rnd1)1)); === They've just removed these asserts. O_o On Mon, Jan 20, 2014 at 1:16 PM, Nikolay Shaplov dh...@nataraj.su wrote: Just let me know if you need instructions

Bug#718805: Re: Bug#718805: /usr/bin/avconv: avconv cannot grab video4linux2 device

On Sunday 19 January 2014 11:24:57 Reinhard Tartler wrote: When looking at the upstream commits, can you please apply this patch to your tree, and tell me if it makes the segfault go away? http://git.libav.org/?p=libav.git;a=commitdiff;h=838b849e70f11dc242399da8d19 c5795fe90913b I've

Bug#718805: Re: Bug#718805: /usr/bin/avconv: avconv cannot grab video4linux2 device

On Sunday 19 January 2014 11:24:57 Reinhard Tartler wrote: Also, if this still persists, please also check the avconv binary I''ve uploaded yesterday to debian/experimental. It is pretty close to current libav/master right now. I've built current experemental package on my computer and

Bug#718805: Re: Bug#718805: /usr/bin/avconv: avconv cannot grab video4linux2 device

On Sunday 19 January 2014 11:24:57 you wrote: Can you also give me the output of avconv -loglevel debug -f video4linux2 -i /dev/video1? I see a number of debugging print statements in the code that might indicate where would be a good place to add further checks. $ avconv -loglevel debug -f

Bug#718805: /usr/bin/avconv: avconv cannot grab video4linux2 device

Sorry for taking so long to get back to this bug. Please do not keep us waiting again, it is really does not work, and as I can understand it does not work on wide range of devices, because it failed with two web cam I have both on Debian Stable and Testing. Package: libav-tools Version:

Bug#697019: Bug is fixed: at least for stable debian 7 kernel SMP Debian 3.2.51-1 x86_64

Bug is fixed: at least for stable debian 7, kernel SMP Debian 3.2.51-1 x86_64 Ext usb-3.0 HDD is mounted properly and it works as expected. Transfer rate shows usb-3 speed. PS uname -a output: Linux lenovo 3.2.0-4-amd64 #1 SMP Debian 3.2.51-1 x86_64 GNU/Linux lsusb output: Bus 001

Bug#724701: transmission: Bad file descriptor error (port of upstream patch included)

Package: transmission Version: 2.52-3+nmu1 Severity: important Tags: patch Hi! Current stable version of transmission has a grave bug that makes it almost unusable: From time to time one or other downlading task pauses with Bad file descriptor error error. This bug is described in upstream

Bug#714931: util-linux: mount sizelimit HFSPLUS

Package: util-linux Version: 2.20.1-5.3 Severity: normal Dear Maintainer, Can't loop mount with sizelimit as described here: https://bugzilla.novell.com/show_bug.cgi?id=809737 works fine with manually created loop. -- System Information: Debian Release: 7.1 APT prefers stable-updates APT

Bug#710202: [Pkg-acpi-devel] Bug#710202: acpid: mate settings daemon is not supported by debian/powerbtn.sh

at BorussiaFan dot De, Meskes at (Debian|Postgresql) dot Org Jabber: michael.meskes at gmail dot com VfL Borussia! Força Barça! Go SF 49ers! Use Debian GNU/Linux, PostgreSQL -- Martynov Nikolay. Email: mar.ko...@gmail.com

Bug#710202: [Pkg-acpi-devel] Bug#710202: acpid: mate settings daemon is not supported by debian/powerbtn.sh

git. Would it be possible to have it applied? Do I need to create a separate ticket? Thank you. -- Martynov Nikolay. Email: mar.ko...@gmail.com acpi-suport.diff Description: Binary data

Bug#710202: acpid: mate settings daemon is not supported by debian/powerbtn.sh

Package: acpid Version: 1:2.0.18-1 Severity: normal Tags: patch User: ubuntu-de...@lists.ubuntu.com Usertags: origin-ubuntu saucy ubuntu-patch Dear Maintainer, Setup: in Mate settings I've setup to put laptop to sleep when power button is pressed. Actions: press power button. Result: laptop

Bug#705096: mirror submission for mirror.logol.ru

: mirror.yandex.ru CDImage-upstream: mirror.yandex.ru Updates: four Maintainer: Nikolay Makarov debmir...@logol.ru Country: RU Russian Federation Location: Moscow Sponsor: Logol Hosting Company http://logol.ru -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject

Bug#704050: mirror submission for mirror.logol.ru

Hi, Simon Sorry for this delay. On 04/02/2013 11:55 PM, Simon Paillard wrote: Hi, On Wed, Mar 27, 2013 at 11:23:48AM +, Nikolay Makarov wrote: Package: mirrors Severity: wishlist Submission-Type: new Site: mirror.logol.ru Type: leaf Archive-architecture: amd64 i386 ia64 kfreebsd-amd64

Bug#704050: mirror submission for mirror.logol.ru

: mirror.yandex.ru CDImage-upstream: mirror.yandex.ru Updates: four Maintainer: Nikolay Makarov debmir...@logol.ru Country: RU Russian Federation Location: Moscow Sponsor: Logol Hosting Company http://logol.ru -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject

Bug#701798: pdns-server package depends on libsqlite3-0 for no practical reason

The bindbackend, which is part of pdns-server 3.1, uses sqlite3 for key storage. So a system running without libsqlite3-0 with bind backend won't be able to do DNSSEC? Would it fail gracefully or fatally in that situation? I'm pretty sure the answer is 'fatally'. More correct answer

Bug#701798: pdns-server package depends on libsqlite3-0 for no practical reason

Package: pdns-server Version: 3.1-4 Severity: normal pnds-server package depends on libsqlite3-0 for no practical reason. If I manually remove gsqlite3 backend from building and packaging, and uninstall libsqlite3-dev and try to build pdns package manually, pdns-sever and all other backends

Bug#697019: linux-image-3.2.0-4-amd64: USB 3.0 ext HDD drive doesnt work and hangs usb 3.0 hub

On 01/20/2013 08:09 PM, Ben Hutchings wrote: Control: tag -1 moreinfo Could you test whether Linux 3.7 (currently available in experimental http://wiki.debian.org/DebianExperimental) still has this problem? Ben. There is no problem with my USB 3.0 hdd in kernel 3.7-trunk-amd64 (see attach

  1   2   3   >