Many thanks @Mark for the quick and effective reaction! The new version works
as desired.
Dear Mark,
> Can you clarify exactly what you did here? Was that before or after the
> dist-upgrade?
I am ways on testing and never changes that. On Sat 10th of June ~20:00 (the
day testing switched to trixie) I simply replaced the directory
/var/cache/apt-cacher (with all content like cached
Package: apt-cacher
Version: 1.7.29
As far as I can see, calling /usr/share/apt-cacher/apt-cacher-cleanup.pl (e.g.
after apt-get dist-upgrade which stores some packages to the cache) under
debian testing/trixie seems to remove ALL package files in the cache
Dear all,
> doing an apt upgrade, the grub-efi-amd64-signed package remained at 2.06-5
I can confirm that behavior. A manual call of grub-install/update-grab is
necessary after the package upgrade to 2.06-7. Otherwise the grub version which
will be used on booting stays 2.06-5 . Maybe the grub
Package: grub-efi-amd64
Version: 2.06-5
Severity: normal
X-Debbugs-Cc: chris...@gmx.de
Dear Maintainer,
I am running debian testing/bookworm. After the updates from grub 2.06-4 to
grub 2.06-5 (about November 18th) in the grub boot menu the box border
characters are not shown as they should.
Hi Dylan,
indeed, version 0.3.60-2 solves the virtualization sound problem. Thanks for
building the package!
All the best,
Chris
Hi Dylan,
thanks for maintaining pipewire and your hint!
Now I did the upgrade on my bare metal installation and there the problem does
not show up (in contrast to the virtualized one). So it is most likely the
upstream issue you have mentioned. However, it is unclear/difficult for me how
to
I am using a kvm virtualized installation of bookworm (I did not try it yet on
my bare metal installation). Below see some informations which may help. Within
syslog I find no spefic entries via 'grep pipewire' which could give me a hint,
but I can provide conrete log snippets if you tell what
Package: pipewire
Version: 0.3.60-1
Severity: important
X-Debbugs-Cc: chris...@gmx.de
Dear Maintainer,
using pipewire 0.59-1 under debian testing (with pusleaudio package uninstalled
if this should matter) makes no problem. I have copied
/usr/share/doc/pipewire/examples/alsa.conf.d to /etc/alsa
This bug was silently fixed in sddm-theme-breeze 4:5.26.0-2 .
Control: reassign sddm-theme-breeze 4:5.25.5-1
I think I have identified the bug now. The breeze package (was upgraded, see
above) changed the wallpaper file types from jpg to png. Now the default config
of sddm/sddm-theme-breeze does not find it, as it wants a jpg in the file
theme.conf .
Please fix theme.conf in package sddm-theme-breeze
Here some entries from an sddm start in /var/log/syslog, filtered by grep sddm:
Oct 18 08:46:21 betty sddm[925]: Initializing...
Oct 18 08:46:21 betty sddm[925]: Starting...
Oct 18 08:46:21 betty sddm[925]: Logind interface found
Oct 18 08:46:21 betty sddm[925]: Adding new display on vt 7 ...
Oct
Package: sddm
Version: 0.19.0-4
Severity: normal
X-Debbugs-Cc: chris...@gmx.de
Dear Maintainer,
immediately after upgrading my bookworm/testing installation on Monday October
17th morning the sddm login screen shows a white background instead the breeze
wallpaper. Further no controls different
Package: thunderbird
Version: 91.4.0-1
Severity: normal
Today the new thunderbird version migrated to testing und I did a upgrade.
However, the translation package (at least for german) does not work although
installed. Thunderbird uses englisch language after starting it (menus items
and so
Package: thunderbird
Version: 91.4.0-1
Severity: normal
Today the new thunderbird version migrated to testing und I did a upgrade.
However, the translation package (at least for german) does not work although
installed. Thunderbird uses englisch language after starting it (menus items
and so
Mesa 21.2.5-1, today release in debian testing shows the same problem.
Hi Norbert,
> But I guess you had, or some cosmic radiation induced bit switch did it
> for you on your hard disk ;-) The default for all installations is being
> on.
yeah, then lets say "maybe" or "probably" I did that, nevertheless, at least it
was a couple of years ago and I cannot remeber
Hi Norbert,
thanks to your repsonse!
> Can you try/check the following:
> * In the Plasma Settings app, go to
> Display and Monitor > Compositor
> and check whether
> Enable compositor on startup
> is selected (on).
Indeed, turning that switch to on and restarting helps.
Today all packages of plasma 5.23 migrated to testing, and it works fine in my
(libvirt) vm. However, on bare metal mesa makes problems (see my bug report
#998386), so in fact there plasma 5.23 stays unusable.
Unfortunately, mesa 21.2.4-1 shows the same problem under plasma 5.23 in
testing. The latter has finally migrated to testing with all packages
yesterday. The combination works fine within my libvirt vm, as I think, it does
not use hw accelleration there. However, on bare metal (see above) it
Package: mesa
Version: 20.3.5-1
Severity: critical
Justification: breaks graphical system like KDE
After updateing mesa from 20.3.5 to 21.2.4 in bookworm (migrated on October
21th to testing) my graphical KDE plasma 5.21 under x11 renders unusable. Note
plasma 5.23 is currently unusable in
KDE/Plasma (package dependencies) are currently completely broken under
testing. Is there currently a chance to (somehow simply) block the partial
transition of plasma 5.23 to testing (so that not related package updates are
easy)? Selectively upgrading single packages with dependencies one
Dear Maintainer, dear Jörg,
the bug is closed since a couple of weeks. However, there was no patch released
at least for debian testing. The (lib)sane version is still 1.0.27 and the
bug(s) still exists.
$ dpkg -l | grep sane
ii libcommon-sense-perl 3.75-1+b1
I can perfectly confirm the issue with my two bullseye instances, one on bare
metal and the other virtualized with kvm.
Chris
On my Buster machine I can completely reproduce that. However, things are more
complicated. For any somehow newer Epson scanner one needs to install the
vendor drivers from http://download.ebz.epson.net/dsc/search/01/search/?OSC=LX
, e.g., like it i the case for my Perfection V37.
While
Dear Steve,
> It's odd that you have files in /boot/efi but on a separate filesystem
> (the rootfs?), not within the ESP.
yep, on the rootfs on /dev/sda2. Must have been done by the deb-installer. Now
I removed the files from the root partition as ESP is mounted over them. As
expected, no
Dear Steve,
I try to deliver missing informations.
> Can you get in to the system? I'm guessing (hoping!) just by disabling
> SB for now.
Fortunately, that is possible.
> Then please do a listing of the EFi System Partition and
> show us what boot variables are set:
> # ls -lR /boot/efi
Dear Steve,
I know that this bug is not closed yet, but maybe the following is of interest
for you.
I noticed your report of bug #930531 which was recently fixed in grub2 version
2.02+dfsg1-19. Thus, I decided to give secure boot another try on my Intel
DH77KC board. Meanwhile grub2
Dear Mathieu,
sorry for the late reply.
> Are you able to reproduce this bug on latest buster (2:4.9.4+dfsg-2 or -3)?
Yes, I still can reproduce it on latest buster with samba 2:4.9.5+dfsg-4 .
> If yes, can you provide your smb.conf?
However, now the bug seems to only show up if I set
Dear Mark,
unfortunately the problem still exists, although you have closed the bug. Is
there any time esitmation, as xemacs is my favorite editor?
Thanks again,
Chris
Meanwhile my Debian Testing systems have (per default) upgraded to libbsd
0.9.1 (and kernel 4.16.0-2). Unfortunaetly, this does not fix the problem
(long ssdm start) under virtualization by kvm, although according to #898088
libvirt 0.9.0-1 should have alredy fixed this.
On productive bare metal
On Sun, Mar 04, 2018 at 23:40:32 +0200, Apollon Oikonomopoulos wrote:
> Good catch, this appears to be the following commit:
> https://github.com/dovecot/core/commit/c27f060a08d3bbf89fadd58baf61f5ba97a47e3a
>
> > Is there a chance that the "mbox,zlib" fix from 2.2.33 could be included in
> > a
>
I was also hit hard by this bug after a recent upgrade from debian 8.x to
debian 9.x.
Dovecot spams the following lines multiple times per second and my .gz
compressed mbox archives do not appear to work properly over imap:
Mar 3 18:37:28 hostname dovecot: imap(username): Panic: file
-- System Information:
Debian Release: stretch/sid
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'testing'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 4.8.0-2-amd64 (SMP w/12 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Package: gnome-builder
Version: 3.22.4-1
Severity: important
Dear Maintainer,
* What led up to the situation?
These steps were taken:
- Installing "Builder" from the software center (v3.22.4)
- Creating a new "Gnome Application" project, with "Python" language.
- Selecting "Build-Project
Package: apf-firewall
Version: 9.7+rev1-5
When you install and then decide to remove it again before any manual
configuration the following is left behind in "/etc/crontab":
*/5 * * * * root /etc/init.d/apf-firewall stop >> /dev/null 2>&1
Please make the package cleanup this addition on
Control: severity -1 serious
I am also seeing this, on armel, in version 3.14.12-1.
Would it be appropriate to mark this bug severity as grave or serious?
I'm not sure if it is proper etiquette, but I might give it a shot with a
control message here (hope this works)
It would be nice if the
On Sat, Apr 04, 2015 at 14:43:23 +0100, Ian Campbell wrote:
On Sat, 2015-04-04 at 14:48 +0200, reportbug wrote:
[...]
Apr 02 12:08:28 hostname qcontrol[617]: qcontrol 0.5.4 daemon starting.
Apr 02 12:08:28 hostname qcontrold[480]: Starting qcontrol daemon: qcontrol.
Apr 02 12:08:28
Hi T,
I did try the ideas in [1] with similar results - i.e. the card is not
automatically detected or mounted.
Can you tell me how to check for tg3 module?
Lastly, here is the dmesg output from boot with the SDHC card
inserted. I ejected and reinserted the card at 466 but it did not
create any
mounted?
Reply-To:
Hello, I recently upgraded a debian unstable system that runs diskless with
pxe netboot / nfsroot, and now every boot spends 180 seconds with repeated
logging of mount: Device or Resource busy error messages in the initramfs
scripts before things kick off and the main boot
Package: apt
Version: 0.9.15
Severity: normal
Dear Maintainer, here is an example which demonstrates this bug:
$ sudo apt-get remove 'libre?f?ice.*'
Reading package lists... Done
Building dependency tree
Reading state information... Done
Note, selecting 'libreoffice.org-calc' for regex
By the way, I tried extracting the *vdpau* files from the nvidia .run
installer (using option -x), without any further success
(that's why they appear in the file listings in the original report)
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of
Package: openjdk-6-jre-headless
Version: 6b27-1.12.6-1~deb6u1
Severity: critical
This is new error that occurs since the last security update of
openjdk-6-jre-headless (installed on 7/26/2013).
This fatal error crashes the jvm. The error occurred at least 3 times
in the last 24 hours on
Upon further inspection, it seems that there is something amiss with
package dependencies. After manually installing libjpeg8, the jvm
crashes no more. But now we have 2 jpeg libs, which seems odd.
ii libjpeg626b1-1The
Independent JPEG Group's
On Mon, 04 Jan 2010 Josselin Mouette j...@debian.org wrote:
No, GNOME does not depend on pulseaudio, at least not in Debian.
Introducing the dependency you suggest would make that a hard dependency
so this is not going to happen.
Currently gnome-core both in stable (wheezy) and in testing
On 25 Jan 2013 Laurent Bigonville bi...@debian.org wrote:
We believe that the bug you reported is fixed in the latest version of
python-cups, which is due to be installed in the Debian FTP archive.
The following search
Hi,
sorry for my late reply.
An update grub has corrected the problem.
Note that windows 8 install AHCI does not seem to be able to boot in
IDE mode thereafter.
Best regards
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble?
Package: catdoc
Version: 0.94.3
On Ubuntu 12.04 64-bit I noticed that catppt 0.94.2-2 crashes while processing
https://docs.google.com/open?id=0B2V313X0LzmQeEVBUXVFQzFiWTQ
using the following command:
catppt -d utf-8 OSSEC-Presentation-mw.ppt
(BTW, OSSEC-Presentation-mw.ppt can be opened
On 04/08/11 17:24, Stefan Fritsch wrote:
On Thursday 04 August 2011, T McIntyre wrote:
Modules installed:
alias auth_basic authn_file authz_default authz_groupfile
authz_host authz_user autoindex cgi dir env mime negotiation php5
reqtimeout rewrite rpaf setenvif status
php-apc is also
Package: installation-reports (lenny-Beta2)
Installation: Vmware Server 1.5
Boot method: Image/CD
Image version:
http://cdimage.debian.org/cdimage/lenny_di_beta2/i386/iso-cd/debian-LennyBeta2-i386-netinst.iso
Date: Sat Jun 14 15:10:40 CEST 2008
Machine: VMWare Server on Debian Etch / IBM
lspci:
lenny-test:~# lspci
00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 01)
00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge
(rev 01)
00:07.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 08)
00:07.1 IDE
for a lot of reasons here it would be very usefull
to have sshd automatically included whenever i use tasksel to
install some server, since i need it, then, anyway.
mm
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Le Tue, Mar 04, 2008 at 09:19:44AM +0100, Andreas Tille a écrit :
Any reason not to fix the FTBFS in the old version
Not really, apart that if it is fixed in the new upstream version it is
a few dozens of minutes of work spent for not a big benefit (provided
that the update to 2.2 is not
Quoting Christian Perrier [EMAIL PROTECTED]:
Quoting [EMAIL PROTECTED] ([EMAIL PROTECTED]):
Could you also check and send here the parameters used by grub to boot
the system ?
(you can see them at the boot menu by hitting 'e' on the default
entry)
I'm afraid I'm not
Quoting Christian Perrier [EMAIL PROTECTED]:
Quoting [EMAIL PROTECTED] ([EMAIL PROTECTED]):
Could you also check and send here the parameters used by grub to boot
the system ?
(you can see them at the boot menu by hitting 'e' on the default
entry)
I'm afraid I'm not
Quoting Christian Perrier [EMAIL PROTECTED]:
Quoting Willy Gommel ([EMAIL PROTECTED]):
Begin: Running Scripts/Init-bottom ...
Done.
run-init: /sbin/init: No such file or directory
Kernel-panic - not syncing: Attempted to kill Init!
Which, of course, puts an immediate and permanent
Package: libsane
Version: 1.0.18.5
Attempting to start xsane, the scanner is found but each fails with a
different error:
hp3400c fails as busy (consistent).
MFC-3820cn fails with an I/O error (consistent)..
Both scanners work under ubuntu feisty with libsane 1.0.18.3 and wincrap.
With xp
Package: viewcvs
Version: 0.9.2+cvs.1.0.dev.2004.07.28-4.1
Severity: important
The version of viewcvs shipping in etch is unable to parse
cvs repository files that have been committed with the
cvs package that ships with etch.
I reported this previously in
Package: iceweasel 2.0.0.1+dfsg-4
Version: 2.0.0.3-1
Dear all,
I can reproduce this bug on a fresh Etch (stable) install. It happens
when typing some non-ascii characters in the search toolbox, and
iceweasel tries to guess the end of the word. As a consequence, it does
not happen if the
Package: gimp
Version: 2.2.13-1
Severity: normal
Dear Gimp maintainers,
I mounted a shared repository with Nautilus, and was able to access it
from programs such as Eye of Gnome. However, this shared folder seems
invisible to Gimp, which is a great pain to me, because I do not know
how to access
Dmesg output without cardmgr running looks like this:
#dmesg
pccard: PCMCIA card inserted into slot 0
cs: memory probe 0xa000-0xa0ff: clean.
pcmcia: registering new device pcmcia0.0
In my first post dmesg output was with running cardmgr.
Gerrit
--
To UNSUBSCRIBE, email to [EMAIL
My 3Com Megahertz network card (Model 3CXEM556 B) isn't recognized anymore.
Kernel modules are loaded after plugging in.
Package: pcmciautils
Version: 014-3
# pccardctl ident
Socket 0:
product info: 3Com, Megahertz 3CXEM556 B, LAN + 56k Modem,
manfid: 0x0101, 0x0035
function: 6
I have similiar problems. Kaffeine freezes on start if I have
LC_CTYPE=zh_CN.UTF-8. You just need to export LC_CTYPE=zh_CN.UTF-8 in a
konsole an try to start kaffeine.
Kaffeine-0.8.3-1
libxine-1.1.2+dfsg-2
Debian Etch
Architecture i386
--
Gerrit
--
To UNSUBSCRIBE, email to [EMAIL
64 matches
Mail list logo