Thanks for the bug report. I just did an upload which I hope will fix
it. Please re-open the bug if not :) Look for the -4 version.
peace,
isaac
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Package: haskell-cabal
Severity: normal
From: Frederik Eaton
Subject: cabal installation
It would be nice if cabal would unlink destination files before
installing over them, rather than just calling copyFile. It appears
that when copyFile finds that a destination file already exists,
rather
Package: kernel-package
Version: 9.008.4
Severity: normal
When installing a newly built kernel, I received the following error
message:
# dpkg -i linux-image-2.6.14-1-k7_workstation.1_i386.deb
Selecting previously deselected package linux-image-2.6.14-1-k7.
(Reading database ... 173674 files and
On Sun, Oct 30, 2005 at 12:16:10AM -0400, Daniel Martin said
Rob Weir [EMAIL PROTECTED] writes:
Hi Daniel,
this bug has been open for a while now; do you think you'll have time to
upload the fix anytime soon? Would you liks someone to NMU it for you?
I've been sucked into other
On Sun, Oct 30, 2005 at 08:37:55AM +0900, Taketoshi Sano said
Hi.
on Sat, 29 Oct 2005 02:05:18 +1000,
Rob Weir [EMAIL PROTECTED] wrote:
This bug has been sitting around in the BTS for a while now, and is now
RC; do you think you'll have time to make a new upload soon?
Ah...,
On Sat, Oct 29, 2005 at 07:20:01AM +0200, Hanno 'Rince' Wagner said
Hi,
Rob Weir schrieb am 29. October 2005:
Do you you think you'll have time to upload this fix soon, or would you
prefer to have someone NMU it?
Please do an NMU (especially since I thought I orphaned that package
LI Daobing [EMAIL PROTECTED] writes:
I delete psvn.elc and then everything seems right.
How about delete this file in preinst or postrm?
I don't decide how Subversion is packaged for Debian.
I only hack psvn.el in the upstream repository.
In my opinion, the best course of action would be to
Frank Küster [EMAIL PROTECTED] writes:
In pcvs.el, x11-ssh-askpass is used.
Not in Emacs 21.4, nor in emacs--multi-tty--0--patch-426.
In pcvs-parse.el, cvs-parse-ignored-messages holds a regexp
with which pcvs skips messages where ssh reports it is starting
ssh-askpass. But pcvs itself never
Package: aptitude
Version: 0.2.15.8-1
Severity: wishlist
Tags: patch, l10n
Updated Russian PO translation for version 0.2.15.9 has been attached.
-- System Information:
Debian Release: 3.1
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.11.7
On 10/30/05, Kalle Olavi Niemitalo [EMAIL PROTECTED] wrote:
LI Daobing [EMAIL PROTECTED] writes:
I delete psvn.elc and then everything seems right.
How about delete this file in preinst or postrm?
I don't decide how Subversion is packaged for Debian.
I only hack psvn.el in the upstream
Some time ago, bold was removed from the default settings.
People with real terminals tended to hate it, and the Slackware
maintainer hated it. It did look kind of gaudy and gross.
So, I think this will be no different on i386 if you have the same
version and no ~/.toprc file to override the
Package: bind9-host
Version: 1:9.3.1-2
Followup-For: Bug #335864
# /usr/bin/host -tAXFR charite.de 160.45.190.151
/usr/bin/host: symbol lookup error: /usr/bin/host: undefined symbol:
isc_net_pton
-- System Information:
Debian Release: testing/unstable
APT prefers testing
APT policy: (990,
Hi,
Just wondering if you have any progress on this ITP? I wanted to package
exerb, which is a similar program. If you still want to package
rubyscript2exe, I'll hold off exerb packaging.
--
bye,
pabs
http://wiki.debian.org/PaulWise
signature.asc
Description: This is a digitally signed
Package: apt
Version: 0.6.42.1
Severity: normal
apt-key update
ERROR: Can't find the archive-keyring
Is the debian-keyring package installed?
I'd installed debian-keyring package in my machine.
dpkg -l|grep debian-keyring
ii debian-keyring2005.05.28
Package: amarok
Version: 1.2.4-1
Followup-For: Bug #326965
When I try to build my collection, amarok writes in the terminal:
TagLib: MPEG::Header::parse() -- Invalid sample rate.
or
TagLib: ID3v2.4 no longer supports the frame type TSIZ. It will be
discarded from the tag.
or
TagLib: A
Please either transition back to two packages (SSL/non-SSL), as
before, or otherwise allow a configuration option to allow plain text
auth.
Upstream does not support plaintext auth.
Did you try building the upstream with the makefile option SSLTYPE=unix ?
I am doing it myself for the time
On Sun, Oct 30, 2005 at 01:45:31PM +0900, Horms wrote:
On Sat, Oct 29, 2005 at 12:41:55PM +0300, Modestas Vainius wrote:
Hi,
the bug title says almost everything. include/asm-${ARCH} headers
are missing from linux-headers-2.6.14-1 as of revision -1 (tested
on i836 and amd64). This
Package: python-gnuplot
Version: 1.7-5
Severity: minor
In /usr/share/doc/python-gnuplot/html/Gnuplot/__init__.html , there is
a link to PlotItems/Data.html#Data (at the bottom). This file does
not exist.
(I haven't checked for other broken links.)
Peace,
Dylan
-- System Information:
Package: wpasupplicant
Version: 0.4.4-1
After upgrading wpa_supplicant to the latest version it started
seg-faulting with the message bellow. After installing the package
libopensc-openssl everything seems to be dandy again.
...
Initializing interface (2) 'eth1'
ENGINE: Loading dynamic engine
Package: linux-headers-2.6.12-1-686
Version: 2.6.12-10
Severity: normal
Modules for linux 2.6.12 are unable to build with make-kpkg. The command
cd /usr/src/linux-headers-2.6.12-1-686
make-kpkg modules_image
fails with the following message :
Someone else on the Debian user list has encountered a similar problem.
However, I now think it may not be wireless-tools that is responsible.
I did a fresh install of debian stable via netinst and everything
worked. I then upgraded both wireless-tools and pcmcia-cs from
Sid and the wireless
On Saturday 29 October 2005 10:06, Christian T. Steigies wrote:
Package: ara
Version: 1.0.10
Severity: important
Automatic build of ara_1.0.10 on aahz by sbuild/m68k 69
[...]
** Using build dependencies supplied by package:
Build-Depends: debhelper (= 4.0.0), liblablgtk2-ocaml-dev,
Package: irssi-text
Version: 8.9-3.1
Severity: wishlist
Tags: upstream
Moin,
I'd like to issue two feature requests. With all the comfort irssi
provides, I even found two items that would make me even more
comfortable with this irc client.
1. Configure colors per channel/window
Currently
Hello !
Cosimo wrote:
have you any preliminary package for b2evo?
Actually the packages *should* enter unstable in a few days. My sponsor
uploaded it yesterday, and it is now in the NEW queue.
If you can't wait, the source package can be found on mentors.debian.net. If
you need a binary, i
Package: licq
Version: 1.3.0-4
Severity: wishlist
Hi,
licq 1.3.2 Final is out,
http://prdownloads.sourceforge.net/licq/licq-1.3.2.tar.bz2?download
would be nice if you could package it :)
Regards,
Matthias
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
On Sun, Oct 30, 2005 at 11:10:12AM +0200, George Danchev wrote:
On Saturday 29 October 2005 10:06, Christian T. Steigies wrote:
Package: ara
Version: 1.0.10
Severity: important
Automatic build of ara_1.0.10 on aahz by sbuild/m68k 69
[...]
** Using build dependencies supplied by
clone 252077 -1
retitle 252077 lyx-common should Recommend psutils.
retitle -1 lyx-common should Depend on gs/gv
thanks
On Sun, Mar 06, 2005 at 05:18:01PM +1100, Rob Weir said
Hi there,
sorry for taking so long to respond. I'm a little torn on this, since
they're not *strictly* neccesssary
Package: lyx
Version: 1.3.6-1
Tags: pending
The xlibs-dev transition package is going away soon, lyx should
build-dep on the specific X -dev packages it needs.
-rob
--
Yeaah, the hammer game! Kill it, kill it, make it dead, whack it!
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
Package: xscreensaver
Version: 4.23-1
Severity: normal
interaggregate.6x is just intermomentary.6x after s/momentary/aggregate/
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
severity 197045 wishlist
reassign 197045 lyx
tags 197045 upstream
thanks
On Wed, Jun 11, 2003 at 09:35:42AM -0700, [EMAIL PROTECTED] said
Thanks for maintaining Debian's Lyx package.
I like it and use it.
Please enhance Lyx so that users can define a visible tag that appears in
cross
Package: pavuk
Version: 0.9.32-1
When you start pavuk is started with gui (pavuk -X) and scenario is saved, it
creates incorrect scenario; here is a problem part:
AllowHTTP: true
AllowSSL: true
Verify CERT: true
Verify CERT:: true
AllowFTPS: true
AllowGopher: true
Please, notice Verify CERT
2005 m. spalis 30 d., sekmadienis 10:36, jūs rašėte:
This is normal, because they are in the flavour-specific package :
linux-headers-2.6.14-1-i386 or whatver the x86 flavours are named. So this
clasify as a feature, not a bug :)
That's the problem, that they are not available anywhere. I don't
severity 72034 minor
thanks [EMAIL PROTECTED] BCCed
On Tue, 19 Sep 2000 17:02:52 +0200, Francesco Potorti` wrote:
The Postscript viewer and the print command default to `ghostview' and
to `lp', which are not good for a Debian system.
While I agree that those defaults aren't good I must also
Hi,
Just to say that the businesscard CD also don't install - failing at
the same point in the install. I've tried with:
MD5SUMName
2bea0da227e9404348f9cc56452552ff debian-testing-amd64-businesscard-29oct05.iso
b113243f2af4aee9652f8e1715d88117
On Sun, Oct 30, 2005 at 12:10:25AM +0200, Sebastien Chaumat wrote:
Hi,
My last tests with nfs-user-server showed that it doesn't work
correctly for replicator. Can you test another nfs server before I
actually change the deps.
We don't have another nfs server currently. However, if the
severity 72188 minor
retitle 72188 problem with CSS (margin-left indication is ignored)
thanks [EMAIL PROTECTED] BCCed
On Tue, 19 Sep 2000 19:15:56 +0200, Francesco Potorti` wrote:
This source illustrates two problems: ghostscript barfs while generating
DSC, and the H5 style indicated in
Package: linux-source-2.6.14
Version: 2.6.14-1
Severity: normal
I get this during compilation:
CC net/ipv4/netfilter/ip_conntrack_helper_pptp.o
net/ipv4/netfilter/ip_conntrack_helper_pptp.c: In function ‘exp_gre’:
net/ipv4/netfilter/ip_conntrack_helper_pptp.c:273: error: ‘struct
Package: xscreensaver
Version: 4.23-1
Severity: minor
Quote from the manpage:
The tangram program uses a view basic shapes to build silhouettes of...
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL
Package: apt-proxy
Version: 1.9.32
Tags: patch
The patch below is required for package diff support (available with
apt from experimental).
diff -rN -u old-apt-proxy-1.9.32/apt_proxy/apt_proxy.py
new-apt-proxy-1.9.32/apt_proxy/apt_proxy.py
--- old-apt-proxy-1.9.32/apt_proxy/apt_proxy.py
Package: mozilla-browser
Version: 2:1.7.12-1
Severity: wishlist
I already installed firefox, mozilla-browser packages on my system.
mozilla-browser is heavy and not used any more by me. my main browser is
firefox. it was originated from mozilla source. but now they are
different as independant
reopen 335184
thanks
On Tue, Oct 25, 2005 at 03:26:23PM +1000, Anthony Towns wrote:
On Sat, Oct 22, 2005 at 10:48:08AM +0100, Mark Brown wrote:
When I attempt to use Options-Categorise bugs by... to display bugs in
my maintainer listing by status and severity only I find that this has
no
On Sat, Oct 29, 2005 at 11:15:18PM +0200, Marco d'Itri wrote:
On Oct 29, Mark Brown [EMAIL PROTECTED] wrote:
(note the test for $ACTION - this is why I didn't bother specifying it
in the udev rule.)
Yes, but if you test it in the rule you save a fork+exec if it does not
match.
Ah, OK.
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sun, 30 Oct 2005 02:14:49 +0200
Olaf van der Spek [EMAIL PROTECTED] wrote:
It says:
/bin/cat: /sys/block/sda/sda1/dev: No such file or directory
Waiting 1 seconds for /sys/block/sda/sda1/dev to show up.
The system is running in VMware.
Do
Jonas Smedegaard wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sun, 30 Oct 2005 02:14:49 +0200
Olaf van der Spek [EMAIL PROTECTED] wrote:
It says:
/bin/cat: /sys/block/sda/sda1/dev: No such file or directory
Waiting 1 seconds for /sys/block/sda/sda1/dev to show up.
The system is
package lyx-qt
severity 316679 important
reassign 316679 lyx
merge 316679 135149
thanks
On Sun, Jun 26, 2005 at 11:20:52AM -0500, John Goerzen said
Package: lyx-qt
Version: 1.3.4-2
Severity: normal
I attemted to spell-check my document, but LyX popped up a box saying:
The spell-checker
Package: icecast2
Version: 2.3.0-1
Severity: normal
Hello Jonas, Hello Chris,
as Chris pointed out correctly version 2.3.0-1 has not been build against
libcurl, so icecast2 YP-support has been disabled in this binary:
/var/log/icecast2/error.log therefore comes up with:
main/main YP server
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sun, 30 Oct 2005 04:17:35 +0200
Erçin EKER [EMAIL PROTECTED] wrote:
Cts, 2005-10-29 tarihinde 23:50 +0200 saatinde, Erik van Konijnenburg
yazdı:
--- orig/perl/KConfig.pm
+++ mod/perl/KConfig.pm
@@ -66,7 +66,7 @@
Package: ifplugd
Version: 0.26-2
Severity: wishlist
Hello,
since June 4th, 2005, there's a new version (0.28), which includes
some build fixes, while Debian version is still 0.26. OTOH, version
0.27 includes a new startup option.
Please upgrade the package. TIA.
Thx, bye,
Gismo / Luca
--
Package: html2ps
Version: 1.0b4-3
Severity: normal
Hello there Andres,
I just X-Debbugs-Cc you in order to inform you that I have reopen your
bugreport #222640 again as the patch provided had to be backed out due
to it causing bad side effects (#320913 and #335701). Unfortunately I
couldn't
On Sun, Aug 14, 2005 at 12:55:15PM +0200, Mike Hommey wrote:
reassign 130557 zlib1g
thanks
Of course, none of the BTS mail ever actually made it to me...
Today, I finally decided myself to look into this long-standing well
known bug, and realized this bug is actually zlib related. You can
It is documented in README.Debian how to enable it anyway, using a
method documented (but discouraged) by upstream.
Hmm. If you refer to the Authentication section there, it redirects
the reader to /usr/share/doc/libc-client2002edebian/md5.txt
That one explains how to enable CRAM-MD5
Package: amarok-xine
Version: 1.3.5-1
Severity: important
Using the xine engine and ALSA or OSS output amaroK always crashes
immediately when starting playback.
As I could not find a corresponding bug in KDE's bugtracker and doubt
that the amaroK team would release a version with such a major
Package: amarok-gstreamer
Version: 1.3.5-1
Severity: normal
amaroK always restarts immediately if it was running, it's volume
level was set to anything else than 0 and I try to close
it for the first time. The restarted amaroK has its volumen level set to
0% and can be closed without any
Package: Samba
Version: 3.0.20b-2
My action was
apt-get -u dist-upgrade -d
I am using Linux Box 2.6.11-kanotix-11 #1 Sun May 29 22:32:10 CEST 2005 i686
GNU/Linux
Further informations:
ls -l /lib/libc.so.6
lrwxrwxrwx 1 root root 13 2005-10-22 13:55 /lib/libc.so.6 - libc-2.3.5.so
Bug-Report:
Package: linux-image-2.6.14-1-k7
Version: 2.6.14-1
Severity: important
linux-image-2.6.14-1-k7 fails to install because of a missing dependency on
cpio. The dependency on initrd-tools normally meant that cpio was
automatically installed as well, but since yaird doesn't have this
dependency the
On Sun, Oct 30, 2005 at 10:40:42AM +, Mark Brown [EMAIL PROTECTED] wrote:
On Sun, Aug 14, 2005 at 12:55:15PM +0200, Mike Hommey wrote:
reassign 130557 zlib1g
thanks
Of course, none of the BTS mail ever actually made it to me...
Today, I finally decided myself to look into this
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
retitle 336392 yaird silently fails with VMware
reassign 336392 yaird
thanks
On Sun, 30 Oct 2005 11:16:58 +0100
Olaf van der Spek [EMAIL PROTECTED] wrote:
Jonas Smedegaard wrote:
On Sun, 30 Oct 2005 02:14:49 +0200
Olaf van der Spek [EMAIL
On Tue, Jan 01, 2002 at 02:47:32AM +0200, Modestas Vainius wrote:
2005 m. spalis 30 d., sekmadienis 10:36, jūs rašėte:
This is normal, because they are in the flavour-specific package :
linux-headers-2.6.14-1-i386 or whatver the x86 flavours are named. So this
clasify as a feature, not a
Jonas Smedegaard wrote:
What version of yaird?
ii yaird [linux-initramfs-tool] 0.0.11-9 Yet Another mkInitRD
And are you running an up-to-date sid system or
It should be up-to-date.
some mix or locally backported stuff?
Try do a 'dpkg-reconfigure linux-image-2.6.14-1-686' and see if
Package: galeon
Version: 1.3.21-8
Severity: important
I switched to an amd64 machine. On this machine, Galeon crashes rather
often when clicking on a link or pressing the back (or forward)
button. The bug is reproducible in that clicking on the same link on
the same page with the same user always
tag 130557 + upstream patch
thanks
On Sun, Oct 30, 2005 at 11:45:27AM +0100, Mike Hommey wrote:
1.2.3-6
Right, OK. There were some changes to the EOF handling in 1.2 so I
wanted to check. The following patch seems to fix the issue, at least
for the test case you provided - I'll forward it
Package: gnome-netstatus
Version: 2.12.0-2
Severity: serious
Hi,
your package failed to build from source due to missing build
dependencies.
| Automatic build of gnome-netstatus_2.12.0-2 on odin by sbuild/sparc 69
| Build started at 20051030-0722
Hi,
bug reported is not a bug. I somehow forgot to update certificate on Debian
machine and on Windows this was done (don't remember when). Exporting
certificate from Win to Linux and it works now.
Sorry for inconvenience,
Damjan
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of
One should always read the spec!
It turns out that getaddrinfo() can already do the filtering I did
manually in my original patches. Here is a set of smarter patches that
lets getaddrinfo() filter instead.
--
Henning Makholm No one seems to know what
Package: lyx-xforms
Version: 1.3.4-2
Severity: normal
File: /usr/bin/lyx-xforms
Today I set the system clock back 1 hour due to the end of
British Summer Time (the equivalent of Daylight Saving
Time). The LyX cursor stopped blinking, and when another
window was placed over the cursor and then
Package: xemacs21-mule
Version: 21.4.17-1
Severity: normal
File: /usr/bin/xemacs-21.4.17-mule
Today I set the system clock back 1 hour due to the end of
British Summer Time (the equivalent of Daylight Saving
Time). xemacs' display-time did not change the time on its
clock display for 1 hour.
Package: phpmyadmin
Version: 4:2.6.4-pl3-1
Tags: l10n, patch
Severity: wishlist
Portuguese translation for phpMyAdmin's debconf messages.
Feel free to use it.
For translation updates please contact Last Translator and/or CC the
Portuguese translation team traduz _at_ debianpt.org
--
Package: hugs98
Version: 98.200503.08-4
Severity: important
Hello,
The current version of hugs98 fails to build on GNU/kFreeBSD,
because of outdated config.guess and config.sub.
The version of config.guess and config.sub in the fptools/
directory of hugs98 is too old to correctly support
#include hallo.h
* André Bertelli Araújo [Sat, Oct 29 2005, 07:46:45PM]:
2005/10/28, Eduard Bloch [EMAIL PROTECTED]:
#include hallo.h
* André Bertelli Araújo [Thu, Oct 27 2005, 11:49:35PM]:
2005/10/24, Eduard Bloch [EMAIL PROTECTED]:
#include hallo.h
* André Bertelli Araújo [Mon,
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
reassign 336440 yaird
thanks
On Sun, 30 Oct 2005 11:58:01 +0100
Bas Kloet [EMAIL PROTECTED] wrote:
linux-image-2.6.14-1-k7 fails to install because of a missing
dependency on cpio. The dependency on initrd-tools normally meant
that cpio was
Francois Marier [EMAIL PROTECTED] (29/10/2005):
On Sat, Oct 29, 2005 at 06:29:36PM +0200, Thomas Huriaux wrote:
I've seen that there is both a fr and a fr_CA translation for dopewars.
I really think it is _pointless_, fr_* languages are all too similar to
separate the translations.
In
Package: findutils
Version: 4.1.20-6
Severity: minor
Tags: patch
-- System Information:
Debian Release: 3.1
Architecture: i386 (i686)
Kernel: Linux 2.6.13.4
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Versions of packages findutils depends on:
ii libc6
Hi,
what is the current status of pydev for Debian, now that Eclipse 3
is in main?
Cheers,
Moritz
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Subject: FTBFS on arm/hppa/m68k with ICE, please use gcc-3.4 there
Package: bibletime
Version: 1.5.1-1
Severity: serious
bibletime suffers from the usual GCC 4.0 ICE on arm, hppa and m68k.
Please use gcc-3.4 on these architectures to work around it.
See
Package: fail2ban
Version: 0.5.4-7
Severity: wishlist
Hello,
mails generated by fail2ban always have a GMT (+) Date: header.
This is quite annoying when you try to correlate fail2ban mails to
syslog entries, because syslog logs in localtime and thus local
timezone.
I have no idea about the
Package: linux-image-2.6.14-1-686
Version: 2.6.14-1
Severity: normal
When booting with vga=795 option at the point it should switch video mode the
screen simply goes black. Continues to boot fine and I am able to login blind.
Same kernel option worked fine at 2.6.12. Here is my grub conf:
title
Package: installation-reports
Debian-installer-version: 30/10/2005
uname -a:
Date: 10:00am GMT 30/10/2005
Method: Network install from businesscard CDROM
Machine: ASUS A8N-SLI Delux
Processor: AMD64 S939 3800+
Memory: 4gigs
Root Device: SATA
Root Size/partition table:
2 200GB disks with
Package: linux-image-2.6.14-1-k7
Version: 2.6.14-1
Severity: normal
The realtime-lsm-source module does not build against the
linux-image-2.6.14-1-k7. The build fails, because the realtime module
depends on the CONFIG_SECURITY_CAPABILITIES being configured as kernel
module, but the
Package: eclipse-platform
Version: 3.1.1-3
Severity: normal
I can't install new extensions (features), I always get the error message
Error creating feature
file://usr/lib/eclipse/features/org.eclipse.platform \
.source_3.1.1
Package: yaird
Version: 0.0.11-9
Severity: normal
After installing 2.6.14 I noticed that the initrd created by yaird has
different permissions from all other initrds on my system.
-rw--- 1 root root 1069831 2005-10-30 12:11 initrd.img-2.6.14-1-686
All others have -rw-r--r--. Also all
Package: lincvs
Version: 1.4.3-1
Severity: serious
While trying to add the last missing build of 1.4.3-1 for ia64 I
noticed that ./debian/rules clean is not complete since upstream's
make distclean isn't complete either. Most notably the tools in contrib
are not cleaned up correctly. You need
Hello,
thank you very much for debugging pilot-xfer.
- Is Blazer.prc file/application bigger than 32KB?
Blazer.prc is the web application distributed by PalmOS. Its size is
464ko. The file has also the following attributes enabled: Read Only,
Backup, Copy Protect, and Resource DB.
-
Package: libgnutls11
Version: 1.0.16-13.1
Severity: normal
When using a non-blocking socket (created by the socket() call)_gnutls_read
fails with EAGAIN which propagates up the call stack accompanied by the
following assertions. Where upon in gnutls_recv_client_cert it gets
converted to
Well, to me it didn't seem fixed yesterday, when I had a gam_server
process up top in the top listing during the whole day...
However, until now everything normal today, and I wouldn't be able to
tell how it happened, or how to reproduce it.
Regards,
--
Germán Sanchis Trilles [EMAIL PROTECTED]
On Oct 30, Mark Brown [EMAIL PROTECTED] wrote:
Or else you can just install a 2.6.15 kernel which supports
/dev/bus/usb/ and does not need a script.
Presumably I would still need a script in order to propagate things into
procfs until user space knows about the new /dev directory?
The
Package: python2.3-gnome2-extras
Severity: normal
Tags: experimental
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
python2.3-gnome2's dependency on python2.3-gnome2-extras cannot be satisfied
for GNOME 2.12 (currently in
experimental - soon entering unstable) because nautilusburn has bumped up
Package: linux-headers-2.6.14-1
Version: 2.6.14-1
Followup-For: Bug #336295
I'm also hitting this problem, maybe what's missing is made a little clearer by
the comparison between 2.6.12 2.6.14:
lrwxrwxrwx 1 root root8 Sep 30 19:44
./linux-headers-2.6.12-1-686/include/asm - asm-i386
forwarded 336441 http://bugzilla.gnome.org/show_bug.cgi?id=320232
tags 336441 + amd64
thanks
Hi,
On Sun, Oct 30, 2005, Lionel Elie Mamane wrote:
I switched to an amd64 machine. On this machine, Galeon crashes rather
often when clicking on a link or pressing the back (or forward)
retitle 126177 securenets and ypbind broadcasting don't play well
merge 329382 126177
thanks
These two are the same bug: due to the implementation of RPC broadcasts
involving relaying by portmap on the server machine ypbind can find
itself trying to talk to a server that won't.
--
You grabbed
Em Dom, 2005-10-30 às 14:23 +0100, EagleCros escreveu:
Well, to me it didn't seem fixed yesterday, when I had a gam_server
process up top in the top listing during the whole day...
However, until now everything normal today, and I wouldn't be able to
tell how it happened, or how to reproduce
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sun, 30 Oct 2005 13:09:56 +
Richard Antony Burton [EMAIL PROTECTED] wrote:
When booting with vga=795 option at the point it should switch video
mode the screen simply goes black. Continues to boot fine and I am
able to login blind.
This
Package: wnpp
Severity: normal
Orphaning this package since I have no time to maintain it.
--
Keita Maehara [EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
On Wed, Jan 21, 2004 at 05:02:50PM +0100, Oliver Kiddle wrote:
The solution was to temporarily run ypbind. It seems that yppush trys
to find out the list of slaves from ypbind. As this is a master and is
not a NIS client itself, this fails. It should be able to just look in
/var/yp/ypservers.
Hi,
From: Randall Donald [EMAIL PROTECTED]
Subject: Re: Bug#224077: xsnow licensing
Date: Sat, 29 Oct 2005 21:10:15 -0700
A couple of things:
1) I do know an address where the author can be contacted
2) This package is in the middle of being adopted by Cai Qian who I
believe is trying to
Giovanni,
Can't locate stddef.ph http://stddef.ph in @INC (did you run h2ph?)
(@INC contains: /etc/perl /usr/local/lib/perl/5.8.7
/usr/local/share/perl/5.8.7 /usr/lib/perl5 /usr/share/perl5
/usr/lib/perl/5.8 /usr/share/perl/5.8 /usr/local/lib/site_perl .) at
/usr/lib/perl/5.8/bits/types.ph
Hello,
I have the same problem, reported on upstream too:
http://sourceforge.net/forum/message.php?msg_id=3405328
I'm working on it, GMail has changed some pages layout.
Best Regards,
Loic
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL
Hi,
I can confirm the bug and will prepare a workaround. There must have
been some changes with one of the latest gcc releases that make the
compiler pickier. At the time of the upload the compilation process had
no problems...
Thanks for reporting this bug.
Best wishes,
Martin.
--
To
Package: html2ps
Version: 1.0b4-2
Severity: minor
- Forwarded message from John Plate [EMAIL PROTECTED] -
But I've seen another small problem: The postscript output has a
restore command at the very end of the file. My Lexmark Optra E310
prints the file without problems but goes in error
Package: debhelper
Version: 4.9.13
Severity: important
Hi,
make-jpkg from the package java-package uses dh_fixperms, but runs into
this error:
xargs: chown: Argument list too long
dh_fixperms: command returned error code
The use of xargs renders dh_fixperms unuseable for every package with a
Subject: ITP: irmp3-ncurses - A control frontend for irmp3
Package: wnpp
Version: 0.5.2; reported 2005-03-28
Severity: wishlist
* Package name : irmp3-ncurses
Version : 0.5.2
Upstream Author : Ross Axe [EMAIL PROTECTED]
URL :http://www.rossaxe.pwp.blueyonder.co.uk/projects/unix/irmp3-ncurses/
*
1 - 100 of 412 matches
Mail list logo