So this is done/notabug Josselin?
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
* Darren Salt li...@youmustbejoking.demon.co.uk [2009-01-01 03:28:10 CET]:
With ATI graphics hardware, use driconf to enable the disable low-impact
fallbacks option.
It's enabled, didn't do any good.
So long. :)
Rhonda
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
Still on 2.24 also... Mmmm, perhaps this is more a vte thing, 2.24 is a
rewritten gnome-terminal. It would be interesting to try trunk of g-t
and/or vte.
Do you know if there's an upstream bug for this Gustavo?
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a
From the online email ballot
promotions held by
Motorola Company, your email have been
approved to claim the
sum of £400,000 (Four hundred thousand pounds) .
To file for claim, you are required to
provide us with the information below for verification:
Full Name:
Mailing address:
Permanent house
Hi,
I'm triaging old Emacs bugs in Debian.
On Mon, 10 Mar 2003 13:35:11 +0100 Stephan A Suerken wrote:
Package: emacs21
Version: 21.2-1
Severity: important
Tags: patch
Hello,
I had severe problems using pcl-cvs under woody over ssh: Status produces
garbled output. I.e., the output
Package: flightgear
Version: 1.0.0-3+b1
--- Please enter the report below this line. ---
Hi,
look at this bugreport:
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=475354
Hi, plib 1.8.5 is avalaible on upstream homesite.
Cheers,
Gonéri
This has been planned for after lenny has been
Package: smuxi-frontend-gnome
Version: 0.6.3-1
Severity: minor
Hello,
smuxi is missing the icon it references to in the .desktop file:
$ grep Icon /usr/share/applications/smuxi-frontend-gnome.desktop
Icon=smuxi-frontend-gnome.svg
$ LANG=C dpkg -S smuxi-frontend-gnome.svg
dpkg:
Package: plib
--- Please enter the report below this line. ---
Hi,
to build the new version (1.9.0) of the flightgear package, plib 1.8.5
is required. ( http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=510387 )
Isn't is possible to accept 1.8.5 in experimental until Lenny has been
released?
Matthias Krüger skrev:
Package: flightgear
Version: 1.0.0-3+b1
--- Please enter the report below this line. ---
Hi,
look at this bugreport:
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=475354
Well, I guess that means you'll have to be a bit patient, then. It could
still be a while
This is release-critical (policy 10.7.3), raising the severity.
Jose, the config script needs to read in the configuration file and
parse debconf defaults from there. The debconf database must not be
used as a registry.
Patches welcome.
--
To UNSUBSCRIBE, email to
Package: linux-source-2.6.26
Version: 2.6.26-12
Severity: important
-- System Information:
Debian Release: 5.0
APT prefers testing
APT policy: (990, 'testing'), (800, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.26-sviat (SMP w/2 CPU cores)
Locale: lang=it...@euro,
Package: xserver-xorg-video-ati
Version: 1:6.9.0-1+lenny4
Severity: important
I am running testing on a Fujitsu-Siemens E8010 (Radeon Mobility 9600
kernel 2.6.22-3 (and-2). I have so far used video-ati 1:6.8.0 (pinned).
After upgrade to 2.6.26-1 kdm would freeze before showing the
Package: logcheck-database
Version: 1.2.68
Severity: normal
I'm using ldap to authenticate users. And thus pam_unix is sufficient, but
allowed to fail. It has now started to spam the logs with lots of
Jan 2 09:22:57 sisko sshd[28511]: pam_unix(sshd:auth): authentication failure;
logname= uid=0
Applied upstream http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=508857
Regards,
Ludovico
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Can you do make clean make -k and send me the full output of that?
In that case I could fix all AMD64 specific warnings in one go.
There could very well be warnings about whatever it is that's causing
your problems, so fixing all warnings (now that they are properly
enabled) is high on my list.
Package: bash
Version: 3.2-4
Severity: normal
--- Please enter the report below this line. ---
I've got a file called -CEl-.log in my directory:
si...@sfreezer:~/test/sdfasdf$ ls
-CEl-.log
si...@sfreezer:~/test/sdfasdf$ ls *.log
ls: Ungültige Option -- E
„ls --help“ gibt weitere Informationen.
This issue also occurs on a Toshiba Satellite A110 with Intel 945
graphics, both using the i810 and the intel driver.
Using latest xorg from Lenny, but running MEPIS 2.6.27 kernel.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble?
Moin
On Tue, Dec 30, 2008 at 12:22:57PM -0500, Barry deFreese wrote:
Popcon is fairly high but while working on a patch to build it with
Gtk2, I got in contact with the upstream developer who thinks it should
no longer be needed and he has certainly done no development on it
recently.
tag 510300 +patch
thanks
Attached trivial patch should do the trick. I'll test on a lenny
standard install what install dbus-x11 on top of xfce-desktop adds.
Cheers,
--
Yves-Alexis
diff --git a/tasks/xfce-desktop b/tasks/xfce-desktop
index 53895bf..4628228 100644
--- a/tasks/xfce-desktop
+++
Package: jajuk
Version: 1.7~rc10+svn4317-1
Severity: wishlist
It would be nice to have the package in main. The major reason for
non-free are the CC 2.5 licensed tango icons. We cannot expect a
relincensing of the tango icons anytime soon:
http://bugs.freedesktop.org/show_bug.cgi?id=19351. Maybe
Package: emacs21
Version: 21.4a+1-3etch1
Severity: normal
File: /usr/bin/emacs21-x
A few seconds after deleting a few lines from a .cpp file, emacs
freezes. It does not react to keyboard and mouse input, and it does
not redraw its window. Using `top` from a terminal window shows that
emacs is
Le 02.01.2009 10:54:00, Johan Walles a écrit :
Can you do make clean make -k and send me the full output of
that?
In that case I could fix all AMD64 specific warnings in one go.
There could very well be warnings about whatever it is that's causing
your problems, so fixing all warnings (now
tags 386107 + unreproducible
Hi,
I'm tagging this bug as unreproducible as no feedback has been
received for one month.
Here is how it works on my host:
* ~/.bash_profile is sourcing my .bashrc:
if [ -f ~/.bashrc ]; then
. ~/.bashrc
fi
* ~/.bahrc has the following lines:
if
File problems.cpp can be found here
http://www.xs4all.nl/~jnw/debian/bug510475/problems.cpp
To freeze emacs, delete lines 582-584 from this file by pressing
Ctrl+Space on (empty) line 582, and Ctrl+w on (empty) line 585. The text
on these lines is
/*-*/ BOOST_AUTO_TEST_CASE( ex_open_range_1 )
Package: sl-modem-daemon
Followup-For: Bug #441925
I noticed the same problem:
- Etch with version 2.9.9d+e-pre2-7etch2 of sl-modem-daemon was OK on my
Fujitsu Siemens Lifebook S 7010
- After upgrading to Sid in Summer 2007 the modem did not work with version
2.9.9d+e-pre2-10 of
On Fri, Jan 02, 2009 at 12:32:24AM +0100, Ricardo Mones wrote:
On Wed, 31 Dec 2008 11:27:15 +
Paul cl...@thewildbeast.co.uk wrote:
FYI, the added header in your example says this:
X-Amavis-Alert: BAD HEADER SECTION, MIME error: error: part did not end
with expected boundary
As
Please try using the attached bubblemon.c instead of the one you have
currently and let me know how it works out.
It should get the build through, and we'll hopefully get some debug
data from it next time it crashes.
Regards //Johan
2009/1/2 Jean-Luc Coulon (f5ibh) jean-luc.cou...@wanadoo.fr:
Cyril Brulebois wrote:
I'd say that is a wishlist bugreport, rather than an important bug in
this package, no? I can understand that you might need it badly, but
that's not really a bug in the current set of packages available to you
as far as I can tell.
Adding the extra binaries and java
On 2009-01-02 11:01:52.00 Ingo Saitz ingo.sa...@stud.uni-hannover.de wrote:
On Tue, Dec 30, 2008 at 12:22:57PM -0500, Barry deFreese wrote:
Popcon is fairly high but while working on a patch to build it with
Gtk2, I got in contact with the upstream developer who thinks it should
no
Package: wnpp
Severity: wishlist
Package: lcr LinuxCallRouter - an ISDN based PBX for Linux
Version: 1.3 (20081124)
Upstream Author: Andreas Eversberg jo...@eversberg.eu
URL: http://isdn.eversberg.eu/download/lcr-1.3/
Licence: GPL
Description:
Formerly known as PBX4Linux, Linux-Call-Router is
Package: xserver-xorg-input-synaptics
Version: 0.14.7~git20070706-3
Severity: normal
Hi,
when I do
synclient -m 1
time xy z f w l r u d m multi gl gm gr gdx gdy
0.000 1 5855 0 0 0 0 0 0 0 0 0 0 0 0 0
I just get the one line as shown above,
Package: linux-image-2.6.26-1-486
Version: 2.6.26-12
Severity: important
Yesterday (Jan 1 2009) at exactly 00:00:00 GMT (01:00:00 CET) my Debian
testing box froze. The screen was blanked so I didn't get a oops or backtrace.
After a reboot the logs didn't contain anything relating to this.
Package: git-buildpackage
Version: 0.4.44
Severity: minor
Tags: patch
Hi
There are a couple of typos in the documentation, a suggested patch for them is
attached.
-- System Information:
Debian Release: 5.0
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing')
tags 510475 + fixed-upstream
thanks
On 2009-01-02 11:33 +0100, Jeroen N. Witmond [Bahco] wrote:
File problems.cpp can be found here
http://www.xs4all.nl/~jnw/debian/bug510475/problems.cpp
To freeze emacs, delete lines 582-584 from this file by pressing
Ctrl+Space on (empty) line 582, and
Package: wnpp
Severity: wishlist
* Package name: bleachbit
Version : 0.2.0
Upstream Author : Andrew Ziem
* URL : http://bleachbit.sourceforge.net/
* License : GPL (v3)
* Programming Lang: Python
* Description : Delete unnecessary files from your system
forwarded 509886 http://bugzilla.xfce.org/show_bug.cgi?id=4762
thanks
On sam, 2008-12-27 at 16:52 +0300, Alexander Gerasiov wrote:
I switched to xfce from gnome and found one usefull feature missing here:
I'm working with several charset encodings: somewhere utf-8, somewhere old
koi8-r and
On jeu, 2008-12-25 at 14:38 +0200, Andrei Popescu wrote:
If I have a combination like de,gb,ro in xorg conf, after switching
layouts the second (and only the second) one will be broken, as in
some
keys will behave as if AltGr is pressed [for example l will
generate
ł (lstroke)].
2008/12/31 Ryan Niebur ryanrya...@gmail.com:
Hi,
Alan, since you've already worked on this a bit, do you want to start
the team and the repository with what you already have done? Then any
of us can work on integrating in some of the work that Ubuntu did.
Sounds like a plan. I'm away for a
Hi Vincent
Not at this moment. Debian is in a deep freeze before the release and I
do not want to disturb that process.
Best regards,
// Ola
On Thu, Jan 01, 2009 at 06:43:41PM +0100, Vincent Bernat wrote:
Package: dimp1
Version: 1.0-1
Severity: wishlist
Hi!
1.1.1 is out since last
On Fri, 2009-01-02 at 10:15 +0100, Stefan Schwarzer wrote:
Package: xserver-xorg-video-ati
Version: 1:6.9.0-1+lenny4
Severity: important
I am running testing on a Fujitsu-Siemens E8010 (Radeon Mobility
9600 kernel 2.6.22-3 (and-2). I have so far used video-ati
1:6.8.0
Package: kannel
Version: 1.4.1-2
Severity: minor
The manpage of kannel says:
For more information, see http://www.kannel.org or
file://usr/doc/kannel/
The file: URL does not exist on my system. First, it needs
to have three slashes. Then, documentation on Debian systems is in
Sven Joachim wrote:
To trigger this bug, it seems to be both necessary and sufficient to
enable font-lock-mode. I could then reproduce it with the emacs21
packages in Lenny, but the problem seems to be solved in emacs22.
I do have (global-font-lock-mode t nil (font-lock)) in my ~/.emacs file.
Package: tagcoll
Version: 1.6.3-1
Severity: grave
Tags: etch
Etch contains two source packages that build tagcoll binaries, tagcoll
(1.6.3-1) and tagcoll2 (2.0.4-1). Currently there is no problem, but
an eventual security/stable update of tagcoll(1) will overwrite
tagcoll2 packages. Uploads will
Package: ufraw
Version: 0.14.1-3
Severity: wishlist
--- Please enter the report below this line. ---
24/12/2008 - UFRaw-0.15 released, based on DCRaw v 8.89.
* Multiprocessing support using OpenMP. Patch by Bruce Guenter.
* Add progress report during the loading of raw files.
* Add
On Fri,02.Jan.09, 12:15:57, Yves-Alexis Perez wrote:
On jeu, 2008-12-25 at 14:38 +0200, Andrei Popescu wrote:
If I have a combination like de,gb,ro in xorg conf, after switching
layouts the second (and only the second) one will be broken, as in
some
keys will behave as if AltGr is
Package: pm-utils
Version: 1.1.2.4-1
Severity: serious
Hi Maintainer!
According to the FHS, arch-independant files need to go into /usr/share.
As the package is arch:all, I don't assume there's any arch dependent
stuff in /usr/lib/pm-utils, so the directory needs to be moved to
/usr/share.
tags 510479 + pending
On Fri, Jan 02, 2009 at 10:53:23AM +, Jonathan Wiltshire wrote:
There are a couple of typos in the documentation, a suggested patch for them
is attached.
Thanks! Gbp's documentation is build from sgml though, so having future patches
against the sgml versions of the
Hi,
I still got problems with splashy 0.3.13-1 .
Running Debian Lenny:
j...@jupiter:~$ dpkg -l | grep splash
ii libsplashy1 0.3.13-1
Library to draw splash screen on boot, shutd
ii splashy 0.3.13-1A
complete
The problem most likely isn't in virt-manger itself but in libgtk-vnc.
Could you please have a look at the created core file like:
ulimit -c unlimited
virt-manager --no-fork
wait til sigsegv
gdb -c core /usr/bin/python
bt
Installing libgtk-vnc-1.0-0-dbg and libvirt0-dbg might improve the
Package: po-debconf
Version: 1.0.15
Severity: wishlist
Tags: l10n
Hi,
Translated manpages of po-debconf package don't have any accent.
The problem occurs when generated pod files (utf8) are converted to man
format with pod2man.
== Part of french generated man page ==
..SH NOM
..IX Header NOM
Package: buildd.debian.org
Severity: wishlist
Tags: patch
Move packages from arm/not-for-us to Packages-arch-specific
Signed-off-by: Aurelien Jarno aurel...@aurel32.net
diff --git a/Packages-arch-specific b/Packages-arch-specific
index acd229a..a30943e 100644
--- a/Packages-arch-specific
Package: nvram-wakeup
Version: 0.97-14
Followup-For: Bug #425120
Hello,
The command time is provided by two packages:
/usr/bin/time time(1)
/usr/sbin/time nvram-wakeup(8)
The policy (section 10.1) states that:
Two different packages must not install programs with different
functionality
* Luca Falavigna [Wed, 17 Dec 2008 00:22:47 +0100]:
Hello Adeodato,
Hello, Luca, sorry for the late reply.
You're aMule Debian maintainer, so your opinion is important.
Fastweb is an important italian ISP which implements a kind of network
based on a NAT technology: every customer is part
Subject: libpcap-ruby: datalink Linux cooked is not supported
Package: libpcap-ruby
Version: 0.6-9
Severity: normal
Tags: patch
Datalink type called Linux cooked (113) is not supported. I have added
it into packet.c for link-header offset and link-type offset, and Pcap.c
for constant export.
I
Package: lsb-core
Version: 3.2-20
Severity: normal
Hello,
The command time is recommended by LSB-3.2 specifications. It is provided
by the package time only (plus bug #425120), but lsb-* don't depend on it.
For the record: bash provide time as a built-in command, dash doesn't. Also,
the package
Le jeudi 1 janvier 2009, Elimar Riesebieter a écrit :
Please delete /var/lib/asound.state and try again.
This have no effect.
It seems that the problem is not really Alsa but Kde sound system...
When I reboot my system and start an TWM or Gnome session (with KDM for
logging), the sound works
I demand that Gerfried Fuchs may or may not have written...
* Darren Salt li...@youmustbejoking.demon.co.uk:
With ATI graphics hardware, use driconf to enable the disable low-impact
fallbacks option.
It's enabled, didn't do any good.
Hmm. That option's the one which makes the difference
Hello,
I try to reinstall memtest86+, and i had no postrm errors.
And i looked in postinst file:
#!/bin/sh
set -e
# offer to run LILO
# (adapted from snippet by chr@gmx.net)
if [ -x /sbin/lilo ] [ -r /etc/lilo.conf ]
[ ${DEBIAN_FRONTEND} != noninteractive ]
grep
Package: sun-java6-doc
Version: 6-07-4
Severity: normal
[This bug applies equally to sun-java5-doc, though I'm filing only one bug
report, to save administration time given that the two packages have the same
maintainer.]
sun-java6-doc v6-07-4 declares that it
Enhances: sun-java6-jdk |
On Thu, 01 Jan 2009, Joerg Jaspert wrote:
(or misbehaviours, some might consider them features) and as such, in
our opinion, falls into the category of so buggy that it is not
supportable, which is not for Debian main (Policy 2.2.1). Also, afawk,
there is no real current Upstream.
It's the
Ingo Saitz wrote:
Moin
On Tue, Dec 30, 2008 at 12:22:57PM -0500, Barry deFreese wrote:
Popcon is fairly high but while working on a patch to build it with
Gtk2, I got in contact with the upstream developer who thinks it should
no longer be needed and he has certainly done no development
This is not just a debian bug as I have the same problem in opensuse 11.1
(have also seen it in kubuntu 8.x). I can reproduce it by playing something in
xine aswell.
Contact Your Claims agent for claims with:
Agent Name: MR GRAHAM BETTS
Tel: +447 024 041 987
Email:( mr_grahambetti...@live.com )
This is to inform you that you have been selected for a cash prize of
#1,500,000.00 (British Pounds) held on the 1th of january 2009 in
London Uk.
Fill the
Hi Jocelyn,
On Wed, 24 Dec 2008 12:30:26 +0100 Jocelyn Jaubert wrote:
Jocelyn, could you please let me know if this package works fine for
you and fixes this problem?
I tried this package on an Ubuntu 8.04 - with the same locale -, as I
don't have any debian available here, and I
Package: pngcrush
Version: 1.6.7-1
Severity: normal
Hi,
It seems that pngcrush sets the timestamps on the file that it creates to
be the same as the input file. I've confirmed this by looking at the output
of strace. There is no rationale for this behaviour in the documentation
nor any way to
Package: tecnoballz
Version: 0.92-2.1
Severity: normal
Tags: patch
Starting at certain level, walls on right can disappear. And when we
loose a ball on right, a part of the ball can go over the right panel,
but the right panel is not redrawn.
The patch I send include this fix and a few others
Hello,
pirmadienis 22 Gruodis 2008, Igor Bogomazov rašė:
description available) ii phonon-backend-xin 4:4.1.3-1 Phonon
Xine 1.1.x
backend
Ok, do you have the sound in general? Try (aplay is in alsa-utils):
$ aplay /dev/urandom
amarok(11526)
Package: wnpp
Severity: wishlist
Owner: juanro...@gmail.com
* Package name: s3sync-ruby
Version : 1.2.6
Upstream Author : s3sync.net
* URL : http://s3sync.net/
* License : Other
Programming Lang: Ruby
Description : Sync and command tool for managing S3
reassign 510219 libc6
quit
On Wed, Dec 31, 2008 at 01:58:57PM +0100, Paolo Bonzini wrote:
with an usual character. Look at this:
~$ sed 's/a[^a-z]/ax/g' a˚b# correct
axb
~$ sed 's/[^a-z]/x/g' a˚b# wrong
a˚b
I hope this last example helps.
Yes, it will help tracking
Package: smstools
Version: 3.1.3-1
Severity: important
Tags: patch
User: ubuntu-de...@lists.ubuntu.com
Usertags: origin-ubuntu jaunty ubuntu-patch
Hi,
A Ubuntu user noticed[0] that the /var/run/smstools directory wasn't
being recreated after a reboot and produced a patch to the init file
to
Package: snmpd
Version: 5.2.3-7etch4
Severity: important
The default etch install of snmpd with default config will leak memory if there
is 1 or more VLAN ethernet interfaces on the system.
This appears to be a regression between sarge and etch.
After some investigation I've found:
* leak
Package: fglrx-driver
Version: 1:8-12-1
Severity: important
I just tried to upgrade to 8-12, but the package doesn't install. I get
the following message:
Preparing to replace fglrx-driver 1:8-7-2 (using fglrx-driver_8-12-1_amd64.deb)
...
Leaving `diversion of
On Thu, Jan 01, 2009 at 11:00:43PM +0100, Richard Hartmann wrote:
Clint, what is your take on this? Do we want to ask this question with
a low priority? I don't know how I feel about touching something as
important as this manually.
In the past, there was at least one incompatibility (that
Hello,
Well, I've found a solution on a french forum :
http://forum.hardware.fr/hfr/OSAlternatifs/Multimedia/probleme-alsa-kde-sujet_25940_1.htm
I have lauched Kmix, setting up the level of the sound, exit my session
without close KMix (important). My next session have sound !
So I have stop
Updating libx11-data to the version from experimental fixed
everything--perhaps a versioned Depends is necessary?
--
Sam Morris s...@red-redemption.com
Red Redemption
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact
forwarded 58326 http://rt.perl.org/rt3/Public/Bug/Display.html?id=1170
thanks
This bug seems to have been also filed upstream. Marking as such.
The testcase listed in the upstream report doesn't seem to trigger the bug
on etch/amd64 or lenny/i386. However, the code in Perl_my_setenv (util.c)
On Thu, Jan 01, 2009 at 09:26:33PM -0600, Dan Nelson wrote:
How does this differ from the existing ${datadir}/zsh/site-functions
directory? Some FreeBSD port management tools install completion
scripts into that directory and zsh seems to pick them up
automatically, and it looks like some
On Fri, Jan 02, 2009 at 12:28:43AM +0100, Richard Hartmann wrote:
Clint, what do you think?
I don't know; it seems like the technical implementation would be
messy at best.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact
On Friday 02 January 2009, Ana Guerrero wrote:
Anyway, without beeing a DD, as a debian user, I'd like to have this
program available as a package.
So, to conclude, just take a moment to reply with at least a simple go-on
or don't-go-on. I won't argue any more.
You are free to package
Package: n/a
Version: n/a
Severity: wishlist
Please package suds. Suds is a lightweight SOAP python client for
consuming Web Services.
See https://fedorahosted.org/suds/
Thank you, Debian maintainers, for your great work!
Sincerely,
Mark Van den Borre
Debian user
--
Mark Van den Borre
(or misbehaviours, some might consider them features) and as such, in
our opinion, falls into the category of so buggy that it is not
supportable, which is not for Debian main (Policy 2.2.1). Also, afawk,
there is no real current Upstream.
It's the first time I hear that the ftpteam has used
Package: kpdf
Version: 4:3.5.9-3
Severity: wishlist
I am wading through a number of large texts. I know that I can search for
words in the
document, but what I think would be more valuable in the current context was if
I could mark
or highlight text. As I was reading through the text, my
Joerg Dorchain wrote:
Package: lcr LinuxCallRouter - an ISDN based PBX for Linux
Version: 1.3 (20081124)
Upstream Author: Andreas Eversberg jo...@eversberg.eu
URL: http://isdn.eversberg.eu/download/lcr-1.3/
Licence: GPL
Description:
Formerly known as PBX4Linux, Linux-Call-Router is not
The fonts are missing because they are contained in the pykaraoke
package.
So the bug is solved by just applying the following patch to
debian/control:
41c41
python-pygame, ttf-dejavu
---
python-pygame, ttf-dejavu, pykaraoke
However, at this point pykaraoke depends on pykaraoke-bin and
Hi Hilmar,
On Di, 30 Dez 2008, Hilmar Preusse wrote:
The change is rather minimal: I just added the file to the list of to
be renamed files.
Ok, the problem is I have no laptop, so I cannot do that ATM. If someone
else can build a new package, give it a test run and upload it fine.
Otherwise I
On Fri, Jan 02, 2009 at 03:03:29PM +, Clint Adams wrote:
On Thu, Jan 01, 2009 at 11:00:43PM +0100, Richard Hartmann wrote:
Clint, what is your take on this? Do we want to ask this question with
a low priority? I don't know how I feel about touching something as
important as this manually.
I need some guidance on how to deal with the following related bugs:
#374644: xine-ui: ctrl/shift key press emulation implementation broken
#506001: xine-ui: xine causes left ctrl keyup events every 20 seconds
These are the same bug: xine-ui suppresses screensavers by injecting
fake keystrokes,
On Fri, 2 Jan 2009, Junichi Uekawa wrote:
What's the status of this bugreport?
Are we waiting for a better patch or is it held back by something?
AFAIK, the patch is neither approved or blessed by upstream, and I
personally do not like it because it introduces new features not
guaranteed to be
reassign 510340 libvirt0
severity 510340 normal
thanks
Robert LeBlanc schrieb:
Package: virt-manager
Version: 0.6.0-6
Severity: important
I have a little problem with attaching a CD image or physical CD. When the VM
is powered on I get this error
message:
Traceback (most recent call
Hello Ross,
I'm revising old Emacs bugs.
On 2003-08-12 23:08 +0200, Ross Boylan wrote:
Package: emacs21
Version: 21.2-1
Severity: normal
I composed an email message in emacs with compose-mail, and then
attached two files with C-c TAB (mail-attach-file) filename command.
One was binary
On Sun, Dec 28, 2008 at 04:33:28PM +0100, Christoph Thomas wrote:
Package: e2fsprogs
Version: 1.41.3-1
Followup-For: Bug #509893
EXT4-fs: dm-5: Filesystem with huge files cannot be mounted read-write
without CONFIG_LSF.
Is there a particular reason why you are choosing to build your
Hi Nico,
happy new year!
Nico Golde [2008-12-21 13:21 +0100]:
what is the status of this issue regarding lenny?
The unauthenticated RSS subscription crash (CVE-2008-5184, STR
#2774) is fixed in 1.3.8, thus in lenny and unstable; it does not
affect etch at all.
The crash on more than 100
I forgot to mention in my previous post that splashy has always worked
upon shutdown, it's rebooting that's been the problem,
I tried moving /usr/share/splashy/themes to /etc/splashy, but it didn't
help much.
After changing themes splashy stopped working again, even with the
Package: linux-image-2.6.26-1-686
Version: 2.6.26-12
Followup-For: Bug #510478
Hi there. I got the same problem.
Last records in logs were just before 00:00:00 UTC.
I'm running ntpd. There were no line about leap second in the logs (as on other
boxes which didn't hang).
-- Package-specific
On Wed, Dec 31, 2008 at 07:42:07PM +, Adam D. Barratt wrote:
Modifying the comment removal to not treat $# as the start of a
comment fixes this particular instance, but I'm not sure whether there
are any other cases where it'll break.
Comments need to either start at the beginning of the
On Fri, Jan 2, 2009 at 16:05, Clint Adams sch...@debian.org wrote:
I don't know; it seems like the technical implementation would be
messy at best.
In that case, I propose wontfix done; any objections from either
of you?
Richard
--
To UNSUBSCRIBE, email to
On Fri, Jan 02, 2009 at 02:19:20AM +0100, Vincent Lefevre wrote:
For instance:
[...]
ALSA lib pcm_dmix.c:996:(snd_pcm_dmix_open) unable to open slave
ALSA snd_pcm_open error: Device or resource busy
Error: Cannot open device alsa.
zsh: segmentation fault CHARSET=`locale charmap` \ogg123
On Fri, Jan 02, 2009 at 03:29:21PM +, brian m. carlson wrote:
That's why I filed it as a wishlist bug. If there are known
incompatibilities, you might want to block this bug with the appropriate
bug numbers.
Anything I can remember has since been fixed, except for jobs -p, which
may never
On Fri, Jan 2, 2009 at 16:29, brian m. carlson
sand...@crustytoothpaste.ath.cx wrote:
I just performed the symlink change and I'll let you know what does and
doesn't work. I'll certainly file wishlist bugs if I encounter any
problems.
If you run into problems, try it with dash, as well.
If
On Fri, Jan 2, 2009 at 16:03, Clint Adams sch...@debian.org wrote:
Brian, are you using zsh as /bin/sh already, with a manual symlink change?
If so, have you run into any problems?
I did run such a setup for some months a year or two ago. Long story short,
you need to fix lots of stuff that
1 - 100 of 327 matches
Mail list logo
