Your message dated Mon, 13 Nov 2006 23:47:13 -0800
with message-id [EMAIL PROTECTED]
and subject line Bug#398393: fixed in hunglish 1.13-1.2
has caused the attached Bug report to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now
Package: latex-cjk-chinese-arphic
Version: 1.15
Severity: serious
Justification: FTBFS on i386, very likely to fail everywhere else
Usertags: grid5000
Hi,
While doing archive rebuilds to prepare the etch release, I tried to
rebuild your package many times, but never succeeded. It always times
Steve == Steve Langasek [EMAIL PROTECTED] writes:
Steve On Tue, Nov 14, 2006 at 03:16:17PM +1100, Brian May wrote:
Package: gnade-dev Version: 1.5.1-4.1
Unless I missed something, gnat-4.1 support would allow me to
compile the one application against both gnade and xmlada
: addgroup: command not
found
dpkg: error processing wmaloader (--configure):
subprocess post-installation script returned error exit status 127
adduser is not Essential, you must depend on it.
The full log is available from
http://ox.blop.info/bazaar/buildlogs/20061114/
The piuparts run
post-removal script returned error exit status 100
The full log is available from
http://ox.blop.info/bazaar/buildlogs/20061114/
The piuparts run was done on about 40 AMD64 nodes of the Grid'5000
platform, using a clean chroot containing an etch i386 environment
(not unstable). Internet
-common: simba configure: aborted.
dbconfig-common: flushing administrative password
dpkg: error processing simba (--configure):
subprocess post-installation script returned error exit status 1
The full log is available from
http://ox.blop.info/bazaar/buildlogs/20061114/
The piuparts run
On Tue, Nov 14, 2006 at 12:03:17AM -0300, Damián Viano wrote:
This is clearly a missing build-depend on libgtk2.0-bin.
Missing *dependency* on libgtk2.0-bin, as pointed out by vorlon on irc
sorry for the confusion I was a bit too sleepy.
--
Damián Viano(Des)
--
To UNSUBSCRIBE, email
On Mon, Nov 13, 2006 at 05:47:03PM +0200, Tuukka Hastrup wrote:
In my tests, refreshing and subscribing work, but they take
intolerably long (at least ten minutes). For me, this has been the
case with the versions in Sarge too.
I wait roughly 15 minutes, then straw freezes. Sometimes
Ok, you are right!
It should be possible to run the two application in
parallel (i.e. one for kernel and the other for other
projects), but I think it is very rare (or maybe only
theoretical).
So now I will change the dependences, so that they conflicts.
Maybe in future I will change the binary
Your message dated Tue, 14 Nov 2006 01:47:17 -0800
with message-id [EMAIL PROTECTED]
and subject line Bug#398410: fixed in libapache2-mod-annodex 0.2.2-5
has caused the attached Bug report to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the
Processing commands for [EMAIL PROTECTED]:
severity 355384 serious
Bug#355384: wflogs: removal of /var/log/wflogs fails
Severity set to `serious' from `normal'
tag 355384 + confirmed
Bug#355384: wflogs: removal of /var/log/wflogs fails
There were no tags set.
Tags added: confirmed
thanks
: command not found
dpkg: error processing socklog (--purge):
subprocess post-removal script returned error exit status 127
The full log is available from
http://ox.blop.info/bazaar/buildlogs/20061114/
The piuparts run was done on about 40 AMD64 nodes of the Grid'5000
platform, using a clean chroot
tags 398492 pending
thanks
Brian May wrote:
Unless I missed something, gnat-4.1 support would allow me to compile
the one application against both gnade and xmlada available in Debian.
The thing you missed is that gnade 1.6.1 is in the NEW queue and will
hit sid shortly :) Indeed it will
On Tuesday 14 November 2006 08:43, Kel Modderman wrote:
Package: hostapd
Version: 1:0.5.5-3
Severity: grave
Justification: renders package unusable
The subtle changes between 0.5.5-2 and 0.5.5-3 have exposed a
showstopping bug when used in conjunction with certain madwifi driver
versions
/lib/dpkg/info/uim-gtk2.0.postrm: line 23:
/usr/sbin/update-gtk-immodules: No such file or directory
dpkg: error processing uim-gtk2.0 (--purge):
subprocess post-removal script returned error exit status 1
The full log is available from
http://ox.blop.info/bazaar/buildlogs/20061114
Processing commands for [EMAIL PROTECTED]:
retitle 240134 sqwebmail-de: completely out of date and unuseable
Bug#240134: sqwebmail-de: sqwebmail changed from .gif to .png images
Changed Bug title.
severity 240134 grave
Bug#240134: sqwebmail-de: completely out of date and unuseable
Severity set
processing rusersd (--configure):
subprocess post-installation script returned error exit status 127
The full log is available from
http://ox.blop.info/bazaar/buildlogs/20061114/
The piuparts run was done on about 40 AMD64 nodes of the Grid'5000
platform, using a clean chroot containing
:nogroup': invalid user
dpkg: error processing slimp3 (--configure):
subprocess post-installation script returned error exit status 1
adduser is not essential, you need to depend on it.
The full log is available from
http://ox.blop.info/bazaar/buildlogs/20061114/
The piuparts run was done
-inetd: command not
found
dpkg: error processing sendfile (--purge):
subprocess post-removal script returned error exit status 127
The full log is available from
http://ox.blop.info/bazaar/buildlogs/20061114/
The piuparts run was done on about 40 AMD64 nodes of the Grid'5000
platform, using
http://ox.blop.info/bazaar/buildlogs/20061114/
The piuparts run was done on about 40 AMD64 nodes of the Grid'5000
platform, using a clean chroot containing an etch i386 environment
(not unstable). Internet was not accessible from the build systems.
About Grid'5000:
Grid'5000 is an highly
(--purge):
subprocess post-removal script returned error exit status 2
Your postrm script doesn't make any difference between postrm remove
and postrm purge, which is obviously wrong.
The full log is available from
http://ox.blop.info/bazaar/buildlogs/20061114/
The piuparts run was done on about
Processing commands for [EMAIL PROTECTED]:
# Automatically generated email from bts, devscripts version 2.9.23
severity 393792 normal
Bug#393792: pilot-addresses: now broken
Severity set to `normal' from `grave'
End of message, stopping processing here.
Please contact me if you need
This package is hopelessly out of date.
And unuseable because it hides features, fails without proper
explanation, etc.
Willi
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
On Tue, Nov 14, 2006 at 12:20:43PM +0100, Jochen Friedrich wrote:
adduser is not essential, you must depend on it.
Yes, i know. And snmpd already does depend on adduser:
The real problem is that adduser is not essential, so you're not allowed to
use it from postrm purge without first checking
Processing commands for [EMAIL PROTECTED]:
tags 398492 pending
Bug#398492: gnade-dev: gnat 4.1 support
There were no tags set.
Tags added: pending
thanks
Stopping processing here.
Please contact me if you need assistance.
Debian bug tracking system administrator
(administrator, Debian Bugs
http://ox.blop.info/bazaar/buildlogs/20061114/
The piuparts run was done on about 40 AMD64 nodes of the Grid'5000
platform, using a clean chroot containing an etch i386 environment
(not unstable). Internet was not accessible from the build systems.
About Grid'5000:
Grid'5000 is an highly
This one time, at band camp, Jochen Friedrich said:
Hi Lucas,
adduser is not essential, you must depend on it.
Yes, i know. And snmpd already does depend on adduser:
It doesn't guarantee it's availability in --purge, though. Just wrap
the calls in
if [ -x /usr/sbin/deluser ]; then
, then you also need to depend on
the cmdline tools for the database types you support. otherwise
you'd have to install postgres clients and libraries even if you
were packaging a mysql app and vice versa.
The full log is available from
http://ox.blop.info/bazaar/buildlogs/20061114/
The piuparts
Processing commands for [EMAIL PROTECTED]:
# Automatically generated email from bts, devscripts version 2.9.21
tags 397574 + patch
Bug#397574: csmash: FTBFS: configure: error: OpenGL library not found.
There were no tags set.
Tags added: patch
End of message, stopping processing here.
Please
I saw on this page that there are about three ways to compile amaya
http://www.w3.org/Amaya/User/Autoconf.html
Compiling with GTK+ seems not so interesting because of the SVG
support...
But for now as I've seen on the debian rules file, amaya is compiled
with this option :
--with-wx --with-gl
-reconfigure -plow packagename'.
/var/lib/dpkg/info/sitebar.postinst: line 95: mysql: command not found
dpkg: error processing sitebar (--configure):
subprocess post-installation script returned error exit status 127
The full log is available from
http://ox.blop.info/bazaar/buildlogs/20061114
Processing commands for [EMAIL PROTECTED]:
tags 398532 etch-ignore
Bug#398532: toshutils: postrm fails: /var/lib/dpkg/info/toshutils.postrm: line
15: /sbin/update-modules: No such file or directory
There were no tags set.
Tags added: etch-ignore
thanks
Stopping processing here.
Please
: command not found
dpkg: error processing tpb (--configure):
subprocess post-installation script returned error exit status 127
adduser is not essential, you have to depend on it.
The full log is available from
http://ox.blop.info/bazaar/buildlogs/20061114/
The piuparts run was done on about
Your message dated Tue, 14 Nov 2006 10:47:53 +0100
with message-id [EMAIL PROTECTED]
and subject line gnade-dev: gnat 4.1 support
has caused the attached Bug report to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your
On Tue, Nov 14, 2006 at 01:17:31PM +0100, Lucas Nussbaum wrote:
This one is non-trvial to reproduce. You can see it with:
in a chroot:
debfoster -o MaxPriority=required -f -n apt debfoster
apt-get install quagga
and then you get:
Selecting previously deselected package quagga.
Your message dated Tue, 14 Nov 2006 01:32:21 -0800
with message-id [EMAIL PROTECTED]
and subject line Bug#395425: fixed in gnomeicu 0.99.12-1
has caused the attached Bug report to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now
: /sbin/update-modules: No
such file or directory
dpkg: error processing toshutils (--purge):
subprocess post-removal script returned error exit status 1
The full log is available from
http://ox.blop.info/bazaar/buildlogs/20061114/
The piuparts run was done on about 40 AMD64 nodes of the Grid'5000
tags 398532 etch-ignore
thanks
On Tue, Nov 14, 2006 at 10:41:44AM +0100, Lucas Nussbaum wrote:
During a piuparts run over all the packages in etch, I ran into a
problem with your package:
Removing toshutils ...
Purging configuration files for toshutils ...
Your message dated Tue, 14 Nov 2006 05:02:44 -0800
with message-id [EMAIL PROTECTED]
and subject line Bug#398196: fixed in qdbm 1.8.74-1.1
has caused the attached Bug report to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now
dpkg: error processing sn (--purge):
subprocess post-removal script returned error exit status 127
The full log is available from
http://ox.blop.info/bazaar/buildlogs/20061114/
The piuparts run was done on about 40 AMD64 nodes of the Grid'5000
platform, using a clean chroot containing
not found
dpkg: error processing snmpd (--purge):
subprocess post-removal script returned error exit status 127
adduser is not essential, you must depend on it.
The full log is available from
http://ox.blop.info/bazaar/buildlogs/20061114/
The piuparts run was done on about 40 AMD64 nodes
Processing commands for [EMAIL PROTECTED]:
severity 370295 important
Bug#370295: sun-java must not provide java2-runtime
Severity set to `important' from `serious'
thanks
Stopping processing here.
Please contact me if you need assistance.
Debian bug tracking system administrator
Hello,
I did experience a bit more, and this one should work :
--- /var/lib/dpkg/info/udev.postinst2005-05-29 19:36:20.0 +0200
+++ udev.postinst 2006-11-09 19:25:28.118104583 +0100
@@ -68,7 +68,8 @@
return 0
fi
- if [ ! -r /proc/1/root ]; then
+ version=`uname -r`
Hello, ...
Well, i gave this bug a bit of a test.
on a 2.6.18 powerpc/pegasos system, which is mostly etch with sid kernels, i
tested both proposed fixes :
if ! [ -r /proc/1/root -a /proc/1/root/ -ef /proc/self/root/ ]
returned FALSE in both cases (Well, i think i forgot the !, so it
processing rbldnsd (--configure):
subprocess post-installation script returned error exit status 127
The full log is available from
http://ox.blop.info/bazaar/buildlogs/20061114/
The piuparts run was done on about 40 AMD64 nodes of the Grid'5000
platform, using a clean chroot containing an etch i386
: error processing smtpguard (--configure):
subprocess post-installation script returned error exit status 127
The full log is available from
http://ox.blop.info/bazaar/buildlogs/20061114/
The piuparts run was done on about 40 AMD64 nodes of the Grid'5000
platform, using a clean chroot containing
On Tue, 14 Nov 2006, Lucas Nussbaum wrote:
Package: rbldnsd
Version: 0.996
Severity: serious
Usertags: grid5000
Hi,
During a piuparts run over all the packages in etch, I ran into a
problem with your package:
Setting up rbldnsd (0.996) ...
/var/lib/dpkg/info/rbldnsd.postinst:
Package: pdns-recursor
Version: all
Severity: critical
Tags: security, fixed-upstream
CVE-2006-4251:
PowerDNS Security Advisory 2006-01: Malformed TCP queries can lead to a buffer
overflow which might be exploitable
[..]
PowerDNS Recursor 3.1.3 and previous miscalculate the length of incoming
Processing commands for [EMAIL PROTECTED]:
found 390664 1.39+1.40-WIP-2006.10.02+dfsg-2
Bug#390664: [NONFREE-DOC] Package contains IETF RFC/I-Ds
Bug marked as found in version 1.39+1.40-WIP-2006.10.02+dfsg-2.
thanks
Stopping processing here.
Please contact me if you need assistance.
Debian
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi Lucas,
adduser is not essential, you must depend on it.
Yes, i know. And snmpd already does depend on adduser:
Package: snmpd
Section: net
Priority: optional
Architecture: any
Conflicts: snmp (3.6-3), snmptraplogd
Replaces: snmptraplogd
Hello Lucas,
There was a missing dependency on virtual-mysql-client.
When trying to run piuparts on the fixed package i encountered this error:
[..]
Setting up simba (0.8.4-2) ...
dbconfig-common: writing config to /etc/dbconfig-common/simba.conf
Creating config file
Blah. It should Depends: on adduser (or is it Pre-Depends? adduser
is only used in postinst script.)
Also, the same postinst script references getent. While it's a part
of libc6, on which we already depends on, for other libc variations
it might not be the case. For example, libc6-udeb does
not found
dpkg: error processing cipe-common (--configure):
subprocess post-installation script returned error exit status 127
The full log is available from
http://ox.blop.info/bazaar/buildlogs/20061114/
The piuparts run was done on about 40 AMD64 nodes of the Grid'5000
platform, using
Hi,
As root, the suggested test seems to work.
The problem is that as a non-root user, we always believe we're in a chroot
whether we are or not (I used the gnats user in the pbuilder chroot as it
just happened to be the first user in /etc/passwd I spotted with a valid
shell).
Two separate logs
for the database types you support. otherwise
you'd have to install postgres clients and libraries even if you
were packaging a mysql app and vice versa.
The full log is available from
http://ox.blop.info/bazaar/buildlogs/20061114/
The piuparts run was done on about 40 AMD64 nodes of the Grid'5000
On 14/11/06 at 12:20 +0100, Jochen Friedrich wrote:
Hi Lucas,
adduser is not essential, you must depend on it.
Yes, i know. And snmpd already does depend on adduser:
Package: snmpd
Section: net
Priority: optional
Architecture: any
Conflicts: snmp (3.6-3), snmptraplogd
Replaces:
processing rwalld (--configure):
subprocess post-installation script returned error exit status 127
The full log is available from
http://ox.blop.info/bazaar/buildlogs/20061114/
The piuparts run was done on about 40 AMD64 nodes of the Grid'5000
platform, using a clean chroot containing an etch
Package: uswsusp
Version: 0.3~cvs20060928-2
Followup-For: Bug #397214
I also confirm this bug.
-- System Information:
Debian Release: testing/unstable
APT prefers testing
APT policy: (700, 'testing'), (600, 'unstable')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel:
On 14/11/06 at 13:25 +0200, Radu Spineanu wrote:
Hello Lucas,
There was a missing dependency on virtual-mysql-client.
When trying to run piuparts on the fixed package i encountered this error:
[..]
Setting up simba (0.8.4-2) ...
dbconfig-common: writing config to
Package: udev
Version: 0.056-3
Followup-For: Bug #395889
Hi,
on a 2.6.18 powerpc/pegasos system, which is mostly etch with sid
kernels, i
tested both proposed fixes :
if ! [ -r /proc/1/root -a /proc/1/root/ -ef /proc/self/root/ ]
returned FALSE in both cases (Well, i think i forgot
On 14/11/06 at 10:34 -0500, Peter S Galbraith wrote:
Lucas Nussbaum [EMAIL PROTECTED] wrote:
Package: xtide-data
Version: 20040203-2
Severity: serious
Justification: makes package uninstallable
Usertags: grid5000
Hi,
During a piuparts run over all the packages in etch, I ran
/archives/quagga_0.99.5-3_i386.deb (--unpack):
subprocess pre-installation script returned error exit status 1
The full log is available from
http://ox.blop.info/bazaar/buildlogs/20061114/
The piuparts run was done on about 40 AMD64 nodes of the Grid'5000
platform, using a clean chroot containing
Processing commands for [EMAIL PROTECTED]:
# Automatically generated email from bts, devscripts version 2.9.22
tags 240134 + pending
Bug#240134: sqwebmail-de: completely out of date and unuseable
There were no tags set.
Tags added: pending
End of message, stopping processing here.
Please
Joerg Schilling wrote:
Please read the DFSG, if you believe that you cannot do this, then the
License
that might prevent it is not a free license acording to DFSG.
this is not the place to discuss this again. cdrtools are purged from
Debian, you can't influence the decission anymore.
please
Processing commands for [EMAIL PROTECTED]:
tags 397561 + patch
Bug#397561: beaglefs: FTBFS: Package libbeagle-0.0 was not found in the
pkg-config search path.
There were no tags set.
Tags added: patch
thanks
Stopping processing here.
Please contact me if you need assistance.
Debian bug
Daniel Baumann [EMAIL PROTECTED] wrote:
Joerg Schilling wrote:
The program 'sdd' and The Schily Makefile system are independent projects
(GPL speech: works). As the GPL is an OSI aproved license, it must not
contaminate other projects like The Schily Makefile system, so there is
no
-inetd: command not
found
dpkg: error processing poppassd (--purge):
subprocess post-removal script returned error exit status 127
The full log is available from
http://ox.blop.info/bazaar/buildlogs/20061114/
The piuparts run was done on about 40 AMD64 nodes of the Grid'5000
platform, using
tags 398529 pending confirmed patch
thanks
also sprach Lucas Nussbaum [EMAIL PROTECTED] [2006.11.14.1028 +0100]:
Your postrm script doesn't make any difference between postrm
remove and postrm purge, which is obviously wrong.
You are right, there's no reason to run helpztags when doing
a
Package: wings3d
Version: 0.98.35-3
Severity: grave
Justification: renders package unusable
Makes X crash on my system, with nv driver.
I don't exactly know what logs are needed, so ask !
Regards,
Didier
-- System Information:
Debian Release: 4.0
APT prefers unstable
APT policy: (500,
: command not
found
dpkg: error processing popa3d (--purge):
subprocess post-removal script returned error exit status 127
The full log is available from
http://ox.blop.info/bazaar/buildlogs/20061114/
The piuparts run was done on about 40 AMD64 nodes of the Grid'5000
platform, using a clean chroot
...
/var/lib/dpkg/info/popa3d.postrm: line 7: update-inetd: command not
found
dpkg: error processing popa3d (--purge):
subprocess post-removal script returned error exit status 127
The full log is available from
http://ox.blop.info/bazaar/buildlogs/20061114/
The piuparts run was done
Hi,
This one is non-trvial to reproduce. You can see it with:
in a chroot:
debfoster -o MaxPriority=required -f -n apt debfoster
apt-get install quagga
and then you get:
Selecting previously deselected package quagga.
Unpacking quagga (from .../quagga_0.99.5-3_i386.deb) ...
addgroup:
Daniel Baumann [EMAIL PROTECTED] wrote:
Joerg Schilling wrote:
You (yourself) did take the project independend make code from a different
project's tarball. Maybe, you should just educate those people inside
Debian who
did not understand DFSG § 9.
for a patch, there is nothing
Daniel Baumann [EMAIL PROTECTED] wrote:
Joerg Schilling wrote:
Please read the DFSG, if you believe that you cannot do this, then the
License
that might prevent it is not a free license acording to DFSG.
this is not the place to discuss this again. cdrtools are purged from
Debian, you
Processing commands for [EMAIL PROTECTED]:
# Automatically generated email from bts, devscripts version 2.9.21
tags 397828 + patch
Bug#397828: efp: no game in the package
There were no tags set.
Tags added: patch
End of message, stopping processing here.
Please contact me if you need
need to depend on
the cmdline tools for the database types you support. otherwise
you'd have to install postgres clients and libraries even if you
were packaging a mysql app and vice versa.
The full log is available from
http://ox.blop.info/bazaar/buildlogs/20061114/
The piuparts run was done
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi Stephen,
It doesn't guarantee it's availability in --purge, though. Just wrap
the calls in
if [ -x /usr/sbin/deluser ]; then
else
echo Can't remove $user
fi
I guess this is the best solution.
Thanks,
Jochen
-BEGIN PGP
Package: libpisock-dev
Version: 0.12.1-5
Severity: grave
I have somehow misinterpreted 393792 so I file my comments as a
separate bug.
It seems tha libpisock has changed, so tha programs build-depending on
libpisock-dev needs major adoptions to work with libpisock9
It looks like the case that
Hi,
On Tue, November 14, 2006 12:28, LENHOF Jean-Yves said:
I saw on this page that there are about three ways to compile amaya
http://www.w3.org/Amaya/User/Autoconf.html
Compiling with GTK+ seems not so interesting because of the SVG
support...
AFAIK, SVG support is independant from the
Joerg Schilling wrote:
You (yourself) did take the project independend make code from a different
project's tarball. Maybe, you should just educate those people inside Debian
who
did not understand DFSG § 9.
for a patch, there is nothing problematic with it. but including it into
another
://ox.blop.info/bazaar/buildlogs/20061114/
The piuparts run was done on about 40 AMD64 nodes of the Grid'5000
platform, using a clean chroot containing an etch i386 environment
(not unstable). Internet was not accessible from the build systems.
About Grid'5000:
Grid'5000 is an highly reconfigurable
Processing commands for [EMAIL PROTECTED]:
tags 398529 pending confirmed patch
Bug#398529: vim-vimoutliner: postrm fails:
/var/lib/dpkg/info/vim-vimoutliner.postrm: line 4: helpztags: command not found
There were no tags set.
Tags added: pending, confirmed, patch
thanks
Stopping processing
Your message dated Tue, 14 Nov 2006 05:02:48 -0800
with message-id [EMAIL PROTECTED]
and subject line Bug#397883: fixed in rasmol 2.7.2.1.1-5
has caused the attached Bug report to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now
(FYI: I have been a bit busy in the last few weeks, but I will upload a
fixed package one of the next days.)
--
ciao,
Marco
signature.asc
Description: Digital signature
On Mon, Nov 13, 2006 at 04:00:47PM -0700, dann frazier wrote:
On Sun, Nov 12, 2006 at 08:07:44AM -0600, John Goerzen wrote:
Package: systemimager-server
Version: 3.6.3dfsg1-1
Severity: serious
si_getimage does not download /dev (or rather, it should download
/dev/.static/dev) when
severity 370295 important
thanks
The rationale given for reopening this bug was:
The SWT example suggests that it is OK to reimplement large parts of the
Java API and configure Sun's Java to run with it, but the plain language
of the license prohibits it.
Even though the license text
Eddy Petrișor wrote:
The package is ready for upload and can be found at
http://pkg-games.alioth.debian.org/upload/wormux/
The urgency has been set to medium as it fixes 2 RC bugs, although I am
not sure if this shouldn't have been high. Steve?
Also, I have seen that wormux has been
Package: php5-imap
severity: grave
The package php5-imap is uninstallable in unstable, because of
the new PHP 5.2.0 packages. Assuming, that PHP 5.2.0 gets soon in to
testing, this problem also applies to testing, too.
--
Best regards,
Thomas Babut [EMAIL
Package: php5-pspell
severity: grave
The package php5-pspell is uninstallable in unstable, because of
the new PHP 5.2.0 packages. Assuming, that PHP 5.2.0 gets soon in to
testing, this problem also applies to testing, too.
--
Best regards,
Thomas Babut
Package: php5-imagick
severity: grave
The package php5-imagick is uninstallable in unstable, because of
the new PHP 5.2.0 packages. Assuming, that PHP 5.2.0 gets soon in to
testing, this problem also applies to testing, too.
--
Best regards,
Thomas Babut
Processing commands for [EMAIL PROTECTED]:
severity 397351 serious
Bug#397351: dbishell fails on dpkg --configure
Severity set to `serious' from `important'
tag 397351 + confirmed
Bug#397351: dbishell fails on dpkg --configure
Tags were: patch
Tags added: confirmed
thanks
Stopping processing
Processing commands for [EMAIL PROTECTED]:
# Automatically generated email from bts, devscripts version 2.9.22
tags 398585 sid
Bug#398585: php5-imagick needs to be recompiled against PHP 5.2.0
There were no tags set.
Tags added: sid
tags 398587 sid
Bug#398587: php5-pspell needs to be
Your message dated Tue, 14 Nov 2006 05:47:40 -0800
with message-id [EMAIL PROTECTED]
and subject line Bug#355384: fixed in wflogs 0.9.8-5.1
has caused the attached Bug report to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now
Processing commands for [EMAIL PROTECTED]:
# Automatically generated email from bts, devscripts version 2.9.22
tags 398584 sid
Bug#398584: php5-imap needs to be recompiled against PHP 5.2.0
There were no tags set.
Tags added: sid
End of message, stopping processing here.
Please contact me if
severity 398517 normal
retitle 398517 building the package takes hours
stop
Lucas Nussbaum [EMAIL PROTECTED] wrote:
While doing archive rebuilds to prepare the etch release, I tried to
rebuild your package many times, but never succeeded. It always times
out at various steps, even after
Processing commands for [EMAIL PROTECTED]:
severity 349591 serious
Bug#349591: dspam-webfrontend should be configured after dspam is configured
Severity set to `serious' from `normal'
tag 349591 + confirmed
Bug#349591: dspam-webfrontend should be configured after dspam is configured
Tags were:
Santiago Vila wrote:
On Tue, 14 Nov 2006, Lucas Nussbaum wrote:
[]
Michael, this is just a missing dependency on adduser, which is needed
because adduser is not Essential: yes. Here is a patch:
Yup. I already replied to the original report a few minutes after I received
it. Should I add Cc:
Processing commands for [EMAIL PROTECTED]:
severity 337779 serious
Bug#337779: release-notes do not suggest re-running lilo
Severity set to `serious' from `normal'
reassign 337779 lilo,release-notes
Bug#337779: release-notes do not suggest re-running lilo
Bug reassigned from package
Processing commands for [EMAIL PROTECTED]:
# Automatically generated email from bts, devscripts version 2.9.25
severity 398594 minor
Bug#398594: libpisock-dev: Undocumented api changes breaks other software
Severity set to `minor' from `grave'
End of message, stopping processing here.
Please
On 2006-11-10 16:21 -0800, Steve Langasek wrote:
Hi Phil,
At a first glance this looks more like a TLS emulation kind of problem
than an instruction set discrepancy. But it'd take a bit more detective
work to figure out what's really going wrong, and I guess there is no
guarantee that
1 - 100 of 231 matches
Mail list logo