Michel Dnzer wrote:
On Sun, 2003-08-10 at 14:20, Andreas Wst wrote:
I just ask myself why the Mode_switch key is not working out of the box
(well, of course I know why, because it is not mapped to any key, but
why is this so)??
Because nobody has bothered yet to fix the keymaps / create
Derrik Pates wrote:
On Sun, Apr 20, 2003 at 07:13:30PM +0200, Mich Lanners wrote:
If it's a Mac, you need Mac OpenFirmware in the 2940's ROM. That was
only the case on specific Mac models sold under a different brand name.
Those were sold under the PowerDomain product family - exactly the
Derrik Pates wrote:
On Mon, Apr 21, 2003 at 06:34:07PM +0200, Andreas Tobler wrote:
For what's worth, I flashed two 2940UW from PC world on a 7200 with
Adaptec flash utilities. This was about four years ago and they still work.
Really. I was wondering if you might be able to flash them
Hi all,
I'm cleaning up the X de_CH kbd map for MACINTOSH.
Attached a map which is nearly identical to the OS-X de_CH map. Some
symbols are still missing, but I'd like to hear some opinions.
You can load this map by doing the below command.
NOTE, it is for a Macintosh keyboard and not for a
vinai wrote:
Hey Folks,
I posted a note to one of the mac sites with this question and I thought
I'd ask here as well. Is anyone using (or has tried to use) one of the
new Sonnet G4 CPU's in a 1st generation PCI mac (7300 to 9600) with any
degree of success ? I'm considering trying this in
Thought this is an english list... anyway my few comments.
Roland Wegmann wrote:
Hallo miteinander
Ich habe Debian/Powerpc 2.2rev3 auf einem iMac (Kaufdatum April 2001) ohne
irgendwelche Zusatzpakete installiert. D.h. ich habe eine
Linuxoberfläche,die aussieht wie MSDOS vor x Jahren. Nun
Rory Campbell-Lange wrote:
Hi - please forgive me for a non powerpc question!
I'm looking for Linux network analysis software for our little company
which has a flat LAN with about 100 users running on Ethernet and Bay
switches. Is there anything I should have a look at?
Thanks for any
Mike Fedyk wrote:
I have several cards that I would like to use on my 7300 Pmac. Does anyone
know
if any will work on this arch with Linux?
Ethernet:
RealTek 8139
AMD PCnet
3com 95x
3Com 590 / 905 ? yes are working, and a look here shows you some more cards:
Benjamin Herrenschmidt wrote:
Interesting... obviously that should not happen. Let me double check the
code. Note that the timeout is set to 10 secs, I suppose you have waited
more than that ?
About two minutes.
Ok, I've pushed a slightly modified version, can you test again ?
I
Benjamin Herrenschmidt wrote:
Ok, I've pushed a slightly modified version, can you test again ?
No luck, unplugging the CD-ROM during boot (while it waits) helps. The book
boots without CD-ROM.
I commented out the line 641: OUT_BYTE(drive-ctl|2,IDE_CONTROL_REG);
Then it boots again.
Andreas
Ethan Benson wrote:
Hi,
I have rsynced paul's stable kernel tree to 2.2.15 proper (no pre),
this kernel works quite well with a G3 via yaboot, but will not boot a
7200 (via quik). I have tried my own custom config as well as Paul's
config included in the rsync tree. quik loads the
'
or 'rsync -auvz linuxcare.com.au::linux-pmac-devel your-devel-dir'
Bye
Andreas
--
| Andreas Tobler
| CH-8004 Zuerich
| E-Mail: [EMAIL PROTECTED]
---
'Dread Pirate' Nick Rusnov wrote:
Greetings,
I was wondering if it is still possible to somehow do a manual install from
base2_2.tgz using an existing Linux/PPC installation? I tried to follow the
minihowto thing, but wasn't terribly sucessful (that is, base2_2.tgz from
potato-current)
Hello,
how is the proper clock setting done under a Powermac?
I added a small script excerpt from rc.sysinit (LinuxPPC) to
/etc/init.d/clock.sh where I call the clock program from /sbin to set
the proper date and time from rtc.
Then I added a sysmlink to /etc/rcS.d which points to this clock.sh.
John Whitley wrote:
Someone whose attribution got lost in the shuffle wrote:
PowerPC is now completely broken, as the old binutils won't accept the
target requested by gcc 2.95.1.
On a vaguely related topic, is gcc 2.95.1 safe to use for compiling
kernels yet? I've put my gcc
J.H.M. Dassen (Ray) wrote:
On Wed, Sep 08, 1999 at 13:45:47 -0500, Brad wrote:
The file /usr/sbin/update-rc.d is in the dpkg package, i'm not sure why
you don't have it...
It's not the file Andreas doesn't have; it's the interpreter (/usr/bin/perl)
he doesn't have yet (as it's a
Josh Huber wrote:
Andreas Tobler writes:
here I sit too. I don't come further.
I have the CD snapshot from August (from a berlin-guy). I can't install
anything due to this not configured libc6.
Any help yould be great
Well, I haven't tried it yet, but I was reminded by the other
--
| Andreas Tobler
| CH-8004 Zuerich
| E-Mail: [EMAIL PROTECTED] | [EMAIL PROTECTED]
---
18 matches
Mail list logo
