Hi All,
I'm having weird problems with EMACS. I just installed Debian 1.2
(rex-fixed, actually, so that would be 1.2.15 at the time I snarfed
it, methinks) -- a clean install, onto a fresh HD. As I recall, EMACS
required some X library or other (I don't have X on my system), which
seemed odd to
Hi, debianians, martians and other sapiens !
i upgraded from stable to frozen just yesterday
(got around 40M from debian including kernel-image 2.30)
and discovered several glitches:
1. During booting time looks like there is no
/proc/modules, while after login it's there.
Still figuring
Which package (if any) contains the hosts(5) man page?
Tony.
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
I tried to follow this through the HOWTOs but I must have gotten lost. I've
installed Debian on the computer at the office (the second place I installed
it), connected to a Novell network with an SMC EtherPower card.
The kernel is 2.0.27 with support compiled in for...
Networking
PCI bios
[EMAIL PROTECTED] (Bruce Perens) writes:
/usr/sbin/pppd -d connect 'chat \
AT\C1\D2\F2%G1%E0X4M0L0DTphone-number-deleted \
CONNECT ogin: login-deleted word: password-deleted' \
/dev/cua2 defaultroute -detach
connect /etc/ppp/ppp-connect
/dev/cua1
At boot time, system reports can not find hostname but after login a
hostname command returns the proper name.
installed the new kernel image but system reboots (resets) when it tries
to load the 2.0.30 kernel. The old 2.0.27 kernel boots fine.
Root .bash_profile did not have /sbin and
On May 26, Tony Finch wrote
Which package (if any) contains the hosts(5) man page?
Using the nifty search engine at http://www.debian.org/packages.html
(scroll to the bottom of the page), no package in the latest release
contains a manpage for hosts(5).
Christian
pgphfgt07bfUw.pgp
At 08:42 PM 5/24/97 -0400, you wrote:
Hi,
I have here a 486sx33 and i would like to know if i can change the cpu for
a dx2 66 ... In the specification of the board, i seen that a 486 sx2 66
A 486SX/33 and a DX2/66 are both 5 volt chips, so that's probably ok. Just
be sure to check your
On Sun, 25 May 1997, David B. Teague wrote:
Richard Lough writes:
From: IN%[EMAIL PROTECTED],
IN%[EMAIL PROTECTED] 25-MAY-1997 03:49:04.98
Subj: debian 1.2 install
I ran into a problem at the early stages of installing debian.
I have a soundblaster scsi
I recently upgraded to debian from redhat, and an interesting new
problem has surfaced with xemacs. I use a scrpt with gnudoit to
create new frames frequently. now when I run this script xemacs
coredumps frequently, especially after it's been running for a while.
When I look at the back-trace,
On Sun, 25 May 1997, Michael Hill wrote:
[IPX woes]
debian# ipx_configure --auto_interface=on --auto_primary=on
debian# slist
slist: No primary IPX interface found in ncp_initialize
debian# ipx_interface add -p eth0 802.2
ipx_interface: Requested device (eth0) is down.
I just set up NFS for my two pcs as the following hardware:
System #1
586/120MHz
2GB Hard Disk
Ethernet Card
S3 Graphic Card
Running X
System #2
386/33MHz
20MB Hard Disk(about 10MB were used by Linux software)
Ethernet Card
I also was advised to use ip-masq. to solve some routing problems, but
when I tried to compile kernel (2.0.27) enabling ip-masq. I found that
this option could not be activated from 'make xconfig' menus. Why?
How should I activate this option?
Thanks,
Eugene Sevinian
On May 26, Kendall P. Bullen wrote
Hi All,
I'm having weird problems with EMACS. I just installed Debian 1.2
(rex-fixed, actually, so that would be 1.2.15 at the time I snarfed
it, methinks) -- a clean install, onto a fresh HD. As I recall, EMACS
required some X library or other (I don't
On May 26, Alexander Koch wrote
Quoting [EMAIL PROTECTED] ([EMAIL PROTECTED]):
[EMAIL PROTECTED]:
^
Your message was addressed incorrectly. Here is a list of all of the
valid addresses in the lists.debian.org domain:
debian-admintool-REQUEST: request server for
stephen farrell [EMAIL PROTECTED] writes:
I recently upgraded to debian from redhat, and an interesting new
problem has surfaced with xemacs. I use a scrpt with gnudoit to
create new frames frequently. now when I run this script xemacs
coredumps frequently, especially after it's been
On Mon, 26 May 1997, Eugene Sevinian wrote:
I also was advised to use ip-masq. to solve some routing problems, but
when I tried to compile kernel (2.0.27) enabling ip-masq. I found that
this option could not be activated from 'make xconfig' menus. Why?
How should I activate this option?
I have installed Debian 1.2, Linux kernel 2.0.27, in my home PC and I
would like to migrate to Debian 1.3, I download the files from Internet .
As I am not very skilled in this matter, Could anybody give the basics
guidelines?. Many thanks in advance.
Juan Ramon Martinez Miro
On Mon, 26 May 1997, Alexander Koch wrote:
Quoting [EMAIL PROTECTED] ([EMAIL PROTECTED]):
Hi. This is the qmail-send program at debian.novare.net.
I'm afraid I wasn't able to deliver your message to the following addresses.
This is a permanent error; I've given up. Sorry it didn't work
On Mon, 26 May 1997 [EMAIL PROTECTED] wrote:
I have installed Debian 1.2, Linux kernel 2.0.27, in my home PC and I
would like to migrate to Debian 1.3, I download the files from Internet .
As I am not very skilled in this matter, Could anybody give the basics
guidelines?. Many
On Mon, May 26, 1997 at 01:33:03PM +0400, Eugene Sevinian wrote:
I also was advised to use ip-masq. to solve some routing problems, but
when I tried to compile kernel (2.0.27) enabling ip-masq. I found that
this option could not be activated from 'make xconfig' menus. Why?
How should I
On Tue, May 27, 1997 at 11:23:36AM +0800, A. M. Varon wrote:
Long answer: You have to say yes to the experimental drivers in order for
the option ip masq to appear. kernel 2.0.27 partially supports ip masq, so
you have to patch the kernel with some files to fully use it. If possible,
get the
I also was advised to use ip-masq. to solve some routing problems, but
when I tried to compile kernel (2.0.27) enabling ip-masq. I found that
this option could not be activated from 'make xconfig' menus. Why?
How should I activate this option?
You should have been first enable prompting
I'm modifying my squid redirection script to use a database...I'd prefer
not to have to restart squid every time i update the redirections list.
The non-database version (i.e. hardcoded perl SR statements) works
perfectly. The db version fails on some patterns.
here's a summary of what the
-BEGIN PGP SIGNED MESSAGE-
In the last two days, I have found these two entries in
/var/log/smail/paniclog:
05/26/1997 02:02:03: [m0wVsp6-0002CyC] write to spool failed, \
dir=/var/spool/smail
05/26/1997 02:02:03: [m0wVsp6-0002CyC] incoming mail lost: spool file \
write error: No such
On Mon, 26 May 1997 23:40:35 +1000 (EST), Craig Sanders [EMAIL PROTECTED]
said:
The database is a .db file created with 'makemap hash redir redir'
from [:space:]-delimited source input like the following:
[...]
//.*riddler.com/Commonwealth/bin/statdeploy.* //www.taz.net.au/blank_ad.gif
The
I am trying to install Debian-1.2.10 and the kernel freezes during bootup at
the following point:
[my BusLogic KT445C host adaptor is detected successfully as scsi0]
Ux4F0: address 0x330 in use, skipping probe.
NCR53c406a: no available ports found
qlogicisp : PCI bios not present
eata_dma: No
-BEGIN PGP SIGNED MESSAGE-
On Mon, 26 May 1997 [EMAIL PROTECTED] wrote:
I have installed Debian 1.2, Linux kernel 2.0.27, in my home PC and I
would like to migrate to Debian 1.3, I download the files from Internet .
As I am not very skilled in this matter, Could anybody give the
On Mon, 26 May 1997, Fredrik Ax wrote:
On Mon, 26 May 1997 [EMAIL PROTECTED] wrote:
I have installed Debian 1.2, Linux kernel 2.0.27, in my home PC and I
would like to migrate to Debian 1.3, I download the files from Internet .
As I am not very skilled in this matter, Could anybody
Hello all!
I'm having a weird problem compiling anything with the C++ libraries.
When I try to run the program, I always get the message:
Segmentation fault (core dumped)
Just to give an example, for instance if I compile the following
program I get this core dump:
main.cc:
int
On Mon, 26 May 1997, Brian Candler wrote:
I am trying to install Debian-1.2.10 and the kernel freezes during bootup at
the following point:
[my BusLogic KT445C host adaptor is detected successfully as scsi0]
Ux4F0: address 0x330 in use, skipping probe.
NCR53c406a: no available ports found
On Mon, 26 May 1997, Hamish Moffatt wrote:
Long answer: You have to say yes to the experimental drivers in order for
the option ip masq to appear. kernel 2.0.27 partially supports ip masq, so
you have to patch the kernel with some files to fully use it. If possible,
get the kernel 2.0.30, the
In my /usr/lib/gcc-lib directory, the only directory entry is for
i486-linux. My machine is a 386. Do I have to get the GCC sources and
recompile, or will these libs work on my machine?
Adam Klein
[EMAIL PROTECTED]
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
Hi,
The pattern you have is:
//.*riddler.com/Commonwealth/bin/statdeploy.* //www.taz.net.au/blank_ad.gif
However, on adding printing to your script, I discovered the
key came out to be:
DEBUG key = //.*riddler.com/commonwealth/bin/statdeploy.*
See? the
Hi there,
recently I asked about how to do IP-Accounting, and it looks like
net-acct is the package to go for. But, after trying it - has someone
managed to account the traffic on an outgoing (dialOUT) PPP connection?
I mailed the two people who hinted towards using net-acct, Heiko
Hi all,
I get this error when using perl scripts:
perl: warning: Setting locale failed for the categories:
LC_CTYPE LC_COLLATE
perl: warning: Please check that your locale settings:
LC_ALL = (unset),
LC_CTYPE = (unset),
LC_COLLATE = (unset),
LANG = us
I've been trying to use the msqlperl package but I keep getting:
Can't find loadable object for module Msql in @INC...
Does anyone know what I'm missing?
Steve.
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL
-BEGIN PGP SIGNED MESSAGE-
On Sun, 25 May 1997, Oleg Krivosheev wrote:
Hi, debianians, martians and other sapiens !
i upgraded from stable to frozen just yesterday
(got around 40M from debian including kernel-image 2.30)
and discovered several glitches:
1. During booting time
Hi,
From my .bash_vars file:
LANG=en_US
export LANG
LC_ALL=C
export LC_ALL
hope this helps,
manoj
--
DO NOT, repeat, DO NOT blow the hatch!
Oleg Krivosheev wrote:
1. During booting time looks like there is no
/proc/modules, while after login it's there.
Still figuring out what's going on
Wierd, I thought they fixed that. The problem may be that /proc isn't
mounted until later in the boot process. Do you have a /proc
: When I woke up this morning I went to check my E-Mail and found
: that everything in /home was gone. Directories data and everything.
: To top it all the /home directory had permissions of 555 and was both
: root owned and root group. / is mounted read only and there is a
: core
Hi,
just wonderd if its a bug or a feature that the Latex-package is
replaced by TeTex-Latex as a default-setting
What happens with the extra installed *.sty-Files?
Just curious.
Gernot
--
--
Gernot Bauer
University of Linz
[EMAIL PROTECTED]
--
TO UNSUBSCRIBE
But is it possible to exclude traffic based on source and/or destination
IP separately? What we'd like to do is exclude any traffic where BOTH
source and destination are local, and record all other traffic (e.g. for
international traffic billing, where if either source or dest are
non-local
Currently Intel is the only manufacturer selling 5v 486 chips.
It *should* be a straight drop-in, no jumper changes required.
A *very* old motherboard *could* have a problem supplying enough
current for the doubled chip. But I haven't seen that happen yet,
and I've upgraded a number of
Jim Pick [EMAIL PROTECTED] writes:
He probably didn't choose to replace /etc/init.d/boot when asked. It's
a conffile - we really need to improve the way conffiles are handled,
I think.
One suggestion: give an option to show a
diff -c2 old-conf-file new-conf-file |more
command before any
My current system is debian 1.2.4. I use smail version 3.2-3 as
my MTA and popclient version 3.05-3 to retrieve mail.
I have installed bo on a separate partition. Bo includes the
same version of smail, but popclient has been replaced with fetchmail
version 3.8-0.
When I try to
reading message 4 (1753 bytes) .fetchmail: SMTP connect to (null) failed
I experience this and other problems when using dynamic IPs.
Using '-S localhost' on the commandline solves it for me.
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED] .
Trouble?
I'd like to set up my PPro to enable my 486 to boot nfs.
looking at mknfsroot, this should be possible and perhaps easy with eth
cards.
But I only have a null-modem cable.
Is it still possible ? with what packages?
Other possibilities would be:
-getting 2 more netcards
-installing linux on a
-BEGIN PGP SIGNED MESSAGE-
Is anyone successfully using any version of the ADSM backup software
(client) with the iBCS module package? I can easily get the modules
installed (although I had to rebuild the package), and I used to be able
to run the sco client under 1.1, but I am now
I'm attempting to exchange the meanings of my left CTRL key and my
Caps Lock key, as I have recently got used to an X terminal where they
are in different physical locations to the PC keyboard. After
determining the keycodes generated by these keys, I set them with
xmodmap as follows:
keycode 66
-BEGIN PGP SIGNED MESSAGE-
On 26 May 1997, Alair Pereira do Lago wrote:
Jim Pick [EMAIL PROTECTED] writes:
He probably didn't choose to replace /etc/init.d/boot when asked. It's
a conffile - we really need to improve the way conffiles are handled,
I think.
One suggestion:
On Mon, 26 May 1997, Carlo U. Segre wrote:
This is correct except for 2 specific upgrades which will require manual
intervention. I am not sure what the plan is for the final upgrade
instructions but this is what I had to do.
The first is the removal of the 'modules' package and the
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
alien 5.1 - 5.2 into hamm/hamm/binary-all/admin
alien (5.2) unstable; urgency=low
* Turns out alien has been broken for processing slackware packages
since
version 3.0. It was leaving an /install directory behind. Fixed this.
Joey,
why did you upload only to hamm? Why do you think it is OK
Hi,
Curious thing just happend on my machine. All of a sudden, I'm no longer
allowed to su to root. An attempt results in You are not authorized to
su root. Could this be related to the secure-su package? The suauth
file is the standard one and doesn't forbid me from switching to root. On
a
55 matches
Mail list logo
