On Tue, May 04, 1999 at 02:43:50AM -0300, Paulo Henrique Baptista de Oliveira
wrote:
sou Paulo Henrique ([EMAIL PROTECTED]) do Linux Club
(http://linux.cos.ufrj.br). Nos so usamos a Debian e adoramos ela.
Traduzimos a sua instalacao e mandamos para o Zanardi da Debian.
Essa traducao vai
Leandro Dutra wrote:
A Debian e' muito superior a RH. Ano podemos continuar
assistindo
essa palhaçada da Conectiva.
Tá aqui a minha justificativa por topar fazer até
gratuitamente. Não
agüento mais escutar falar em Linux e escutar o nome RedHat!!!, muito
menos
On May 06, Leandro Dutra decided to present us with:
Tá aqui a minha justificativa por topar fazer até
gratuitamente. Não agüento mais escutar falar em Linux e
escutar o nome RedHat!!!, muito menos Conectiva!!!
Tá bom, agora me expliquem por que essa bronca toda.
Nada contra a
Aloha
ë o seguinte eu tenho o netscape comunnicator instalado
na minha maquina e numa bagunça parece que eu matei os diretorios do
menseger... o problema é que eu não consigo
arrumar (ja tentei desinstalar e instalar de novo como no ruindows mas não
funciona) eu não uso(prefiro o kmail)
mais não
On May 06, Rodrigo Cesar Herefeld decided to present us with:
Aloha
ë o seguinte eu tenho o netscape comunnicator instalado
na minha maquina e numa bagunça parece que eu matei os diretorios do
menseger... o problema é que eu não consigo
arrumar (ja tentei desinstalar e instalar de novo como
O que eu gostoi do Linux eh isso: se vc nao gosta de uma coisa, tem
toda a liberdade de ir por outro caminho. Tb acho que alguns estao
ganhando mais destaques que outros, mas eh assim mesmo e vai continuar
ate que os outros mostrem resultados melhores. Acridito que seja
viavel criar outras
On Thu, 6 May 1999, Robert Kerr wrote:
I'm using gnome with enlightenment, and I'd like to add the gshutdown to
my panel. I've added it successfully, changed gshutdown to setuid root,
You should know that this is a *huge* security hole. You're welcome to
have such a hole if your system
Once (Debien 1.3.1) I could use my ZIP drive by saying
rmmod lp
insmod scsi_mod
insmod sd_mod
insmod ppa
After I installed Debian 2.0, ppa.o was not there any more. Now I
installed kernel 2.2.5. So ppa.o is there again, but not the other two
modules above. If I just say
insmod ppa
I get:
At 05:01 PM 5/6/1999 -0400, Mitch Blevins wrote:
In foo.debian-user, you wrote:
Somewhat off-topic, but perhaps applicable
If a modem is a device for MOdulating/DEModulation,
and a winmodem turns that job over to the software (Windows),
is that not grounds for a class-action fraud suit
Any idea where I can get the driver for this board?
It is based on Intel 82558 controller.
Thanks,
Benjamin
My Linux box locked up on me this morning. Running the stock Debian
2.1/Linux 2.0.36 kernel... and only two services, telnet (from xinetd) and
SSHD1 (current version).
It runs all the time over a dial-up PPP connection... but I couldn't log
into it when I got to work this morning; I figured
Hi,
I'm trying to make Linux bootable from a scsi harddrive using NT
bootloader. I'm reasonably used to lilo, though far from understanding all
the intricacies of the process. I've also read the Linux+NT HOWTO and think
I have followed it appropriately.
After choosing Linux from
I recently (this morning), had a power outtage. I started up my computer and
LILO started going nuts. Not only did it just say LI, but the cursor was
jumping all over the screen and the printer started to print. I used a rescue
disk and ran LILO, then rebooted. Now it prints 01 over and over.
PM == Pann McCuaig [EMAIL PROTECTED] writes:
PM Since you're running debian and (de)installation is so easy, why
PM not just replace Apache with Roxen and see how it goes. You can
PM always change back easily if something breaks.
I would leave apache for now, and install roxen in addition to
Hi Paul:
I'm a newbie also and as I recall I used the rescue floppy to install
kernel
and modules. Could be all wet tho as I'm still trying to get x windows
up and trying to get a game to work. ( I dont think config liked my
answers for my card and unless
I missed my guess thats what I need
My real problem is, I called CTX, which is the manufacturer of the
notebook, and they honestly told me they didn't know what they put in
their notebooks themselves. They even suggest that I open the notebook
to try my luck. Does any one know the probability of ruining the display
if I take
Hi,
Some sites block the emails sent from an unqualified domain.
How do I configure smail so that I can send the mail via a qualified
smtp, or as it
looks like my domain is qualified.
Thanks.
Shao.
--
You'll have to find docs to make your email headers be rewritten with yoour
qualified domain name
-Original Message-
From: Shao Zhang [EMAIL PROTECTED]
To: Debian Mail List debian-user@lists.debian.org
Date: Friday, 7 May 1999 11:41
Subject: smail problem
Hi,
Some sites block the
Hi,
I tried several utils to debug one C program ( hoc from Software Tools ) which
gives me segmentation error but got no clue from them.
The most hopeful one gccchecker failed to compile it in the linking stage:
reporting undefined reference to `chkr.__sigsetjmp'. Anyone knows how to deal
I don't know where it is?
The device section is at the end of your /etc/X11/XF86Config file.
Just scroll down past the modelines, and you will run across the
graphics device section that looks like this:
# Any number of graphics device sections may be present
# Standard VGA Device:
Section
Any one have any experience with using this. Is it worth installing on a
133 pentium?
probably not. solaris is a pretty big memory pig and from what i hear wabi
isn't all that lean either.
That is question 2, has anyone ported any solaris software to linux? I
like to use WABI and JAVA
On Thu, 6 May 1999 [EMAIL PROTECTED] wrote:
I tried several utils to debug one C program ( hoc from Software Tools
) which gives me segmentation error but got no clue from them.
gdb is the tool, but you will need source code and a binary with debugging
symbols to get anywhere. gdb comes
I have recently installed Debian slink. I have successfully configured
Exim and I can send email out to my isp mailhost using Mutt but I can't
get fetchmail to successfully retrieve any email from it. When I run the
following command :
% fetchmail -a -k -vfetchmail.log
% cat fetchmail.log
I've got my two desktop computers networked using 10base2 and they are
working nicely, now I'd like to add my laptop into the system. I don't
have a network pcmcia card, but I do have a null modem cable. I think I
should be able to use it to network my little laptop into the system, can
someone
Well I don't really know exim, but if you were using sendmail, you'd have to
tell the sendmail config (/etc/sendmail.cf) to accept mail for you domain
and as well as localhost. So I guess it would apply to exim config too. Find
the config file and tell exim to accept mail for localhost
On Fri, May 07, 1999 at 12:07:09AM -0400, Monte Copeland wrote:
I sent a test message from my account at
[EMAIL PROTECTED] to my icx.net account. My machine
is named 'dharma' . The problem seems to be the @localhost . I
don't know if it is fetchmail that is doing it or if it is Exim. Any
I've got my two desktop computers networked using 10base2 and they are
working nicely, now I'd like to add my laptop into the system. I don't
have a network pcmcia card, but I do have a null modem cable. I think I
should be able to use it to network my little laptop into the system, can
Hi,
How do I use mutt to create a mailing list?? I can only find the command
alias but nothing else.
I tried to use alias to create a mailing list. But when the mail is
sent,
it displays all the usernames in the mailing list. I would like to have
On Wed, 5 May 1999, Oliver Elphick wrote:
Are you running an edited version of /etc/init.d/postgresql?
The distributed version (6.3.2-10 onwards) contains these lines:
My version is 6.3.2-8. Thank you for the information. I will put it in
my /etc/init.d/postgresql.
Johann
On 07 May 1999, Debian Mail wrote:
Once (Debien 1.3.1) I could use my ZIP drive by saying
rmmod lp
insmod scsi_mod
insmod sd_mod
insmod ppa
After I installed Debian 2.0, ppa.o was not there any more. Now I
installed kernel 2.2.5. So ppa.o is there again, but not the other two
modules
Werner Reisberger [EMAIL PROTECTED] writes:
I tried to install TCL on my machine (hamm) but had to install first
libreadline and libncurses. I made a fault and tried to install first
libreadline (with dpkg) the package complained that libncurses are required
first.
After this installation
Hello everybody!
I'd like to print some documentation I have found in disperse html
files. Now I convert .html files into .ps files with Netscape 4.5 and
print them with a booklet script (4 pages per sheet), but in order to
save more paper and get all documents together I would like to merge .ps
linux japan５月号の付録ＣＤでインストールしたのですが、ブートフロッピー
が作成できない
起動させると starting ＰＣＭＣＩＡ services :modules で固まります。
どなたか、対策方法をご指導いただけませんでしょうか？
version: debian 2.1
model : 日立 フローラ ＰＲ−ＮＬ
cd-rom : tohsiba xm-1402b aipi
pcmciaソケット: cirrus logic pcic conpatible pci topcmcia brige
bios: phoex bios 4.0.5
Subject: Re: PCI Soundblaster card?
Date: Thu, May 06, 1999 at 09:18:06PM +0100
In reply to:Andrew Holmes
Quoting Andrew Holmes([EMAIL PROTECTED]):
Hi,
Thanks, I'm using 2.2.0, so I'll recompile and keep my fingers crossed.
The current stable is 2.2.6 or 7. 2.2.0 .1 had
My compaq deskpro at work (running NT 4.0) spins down it's ide drives
after some period of inactivity.
Can I configure my Linux system to do the same? Most modern IDE drives
should support this feature, is support required on the Motherboard or
Bios to make this work, or is it all in the OS?
My compaq deskpro at work (running NT 4.0) spins down it's ide drives
after some period of inactivity.
Can I configure my Linux system to do the same? Most modern IDE drives
should support this feature, is support required on the Motherboard or
Bios to make this work, or is it all in the OS?
My compaq deskpro at work (running NT 4.0) spins down it's ide drives
after some period of inactivity.
Can I configure my Linux system to do the same? Most modern IDE drives
should support this feature, is support required on the Motherboard or
Bios to make this work, or is it all in the OS?
Can I configure my Linux system to do the same? Most modern IDE drives
should support this feature, is support required on the Motherboard or
Bios to make this work, or is it all in the OS?
My Linux box uses an AZZA AT socket 7 motherboard with an Intel TX
chipset and an AMD K6-233 cpu. I
I cannot use apt-get at all. It seems to be working but then complains
about a package that it cannot install. It says I must install it first
then remove it. I cannot install the said package (gnotepad+) as the
installer (dpkg) refuses. And finally I am in the chicken and egg
problem.
I have
If X can detect that you don't have any valid modes, it obviously can make
some decisions on what settings are valid for your card - so, why can't X
just set the values for you?
No idea why it can't. The whole purpose of xf86config is to configure
system the way you want, if you can. It is
Subject: Help with apt
I cannot use apt-get at all. It seems to be working but then complains
about a package that it cannot install. It says I must install it first
then remove it. I cannot install the said package (gnotepad+) as the
installer (dpkg) refuses. And finally I am in the chicken and
On Thu, 6 May 1999, Javaherian, Benjamin wrote:
:
: Any idea where I can get the driver for this board?
: It is based on Intel 82558 controller.
As a guess, `modprobe eepro100' should help.
--
Nathan Norman
MidcoNet 410 South Phillips Avenue Sioux Falls, SD
mailto:[EMAIL PROTECTED]
Hi HELP!
I got a laptop(K6-23D 333+64Mb RAM S3 virge mg/mx) with a OPL3-SAx(yamaha 719)
sound chipset. It works perfectly under win98, but i dont use 98. The problem
is that sound through dsp device is clipped/disturbed by HDD+MOUSE activity in
X and X-free sessions! Iam using kernel 2.2.x and
Hi, Havoc:
gdb is the tool, but you will need source code and a binary with debugging
symbols to get anywhere. gdb comes with a reasonable manual.
I tried that. It gives me:
GNU gdb 4.17.19981224.m68k.objc.threads.hwwp.fpu.gnat
Copyright 1998 Free Software Foundation, Inc.
GDB is free
Subject: LILO
Date: Thu, May 06, 1999 at 08:36:00PM -0400
In reply to:Rahsheen Porter
Quoting Rahsheen Porter([EMAIL PROTECTED]):
I recently (this morning), had a power outtage. I started up my computer and
LILO started going nuts. Not only did it just say LI, but the cursor
After i have installed the 2.2.0 kernel, my printer stopped to work .
magicfilterconfig didn't solve anything, i read somewhere that the new
kernel implements a new
kind of support for the parralel port, is it related to my problems ?
how do i have to do in order to have my Canon BJC 4000 working
Hi,
Please excuse me for the wide distribution. And do excuse me for not
being able to give the exact technical terms in the following. I have
tried to explain the situation to the best extent that I can (now).
My present set up:
--
I have an i586 system in which I have dos,
Hi,
We have here a LAN with full of Windows PCs. My secondary PC is the only
Linux machine in the LAN, and it has served well as an intraner server. And
as a toy for myself.
I tried to use apt for installing some new packages into it, but ftp (nor
http) didn't work. My question is how Debian
On Thu, 6 May 1999 [EMAIL PROTECTED] wrote:
I tried several utils to debug one C program ( hoc from Software
Tools ) which gives me segmentation error but got no clue from
them.
And any better tool than gccchecker?
Bruce Perens wrote the electric fence. It helps with
arrays, and i
I've got my two desktop computers networked using 10base2 and they are
working nicely, now I'd like to add my laptop into the system. I don't
have a network pcmcia card, but I do have a null modem cable. I think I
should be able to use it to network my little laptop into the
Hey,
did someone know if the proxy of Apache will work only to my localhost
or to all url ?
more clearly :
if I use my browser on my computer is apache-proxy see in its cache
?
or
apache-proxy will work only to the request on my http://localhost
In fact I want to know if I have to
Can I configure my Linux system to do the same? Most modern IDE drives
should support this feature, is support required on the Motherboard or
Bios to make this work, or is it all in the OS?
My Linux box uses an AZZA AT socket 7 motherboard with an Intel TX
chipset and an AMD K6-233 cpu. I
In a message dated 5/7/99 8:08:40 AM Central Daylight Time,
[EMAIL PROTECTED] writes:
If X can detect that you don't have any valid modes, it obviously can
make
some decisions on what settings are valid for your card - so, why can't
X
just set the values for you?
No idea why it
Subject: Help with apt
Date: Fri, May 07, 1999 at 03:04:48PM +0200
In reply to:Daniel Mashao
Quoting Daniel Mashao([EMAIL PROTECTED]):
I cannot use apt-get at all. It seems to be working but then complains
about a package that it cannot install. It says I must install it first
Question: So how do I, running from a slink CD, get and install potato's apt?
If I add entries for 'unstable' in /etc/apt/sources.list, and then go into
dselect, it wants to upgrade my world to potato.
Of course, I can always just go download the deb and run dpkg on it, but is
there a better
On Fri, May 07, 1999 at 04:09:42PM +0200, Jean-Marc Bourdaret wrote:
After i have installed the 2.2.0 kernel, my printer stopped to work .
magicfilterconfig didn't solve anything, i read somewhere that the new
kernel implements a new
kind of support for the parralel port, is it related to my
On Fri, 7 May 1999, Andrei Ivanov wrote:
If X can detect that you don't have any valid modes, it obviously can make
some decisions on what settings are valid for your card - so, why can't X
just set the values for you?
When X says no valid modes, what it means is, based on the
When I send a message (or reply to one) using pine and then
receive the message, the author field looks like:
To: [EMAIL PROTECTED]
instead of
Clyde Wilson
Any ideas?
Hi!
I was wondering whether it's possible to have to printers attached
to two parallel ports in one Linux machine being served by lp (*NOT* lprng).
I have this set up right now, and one of them prints fine, the other gets
stuff if I cat myfile.txt /dev/lp2. Files are copied to this
Hi Bob
If your laptop is a Winzoz box you have to use a terminal emulator because
it's the easiest way to link it to the net.
if it is a Linux box you can use slattach. It works fine to me too.
I've got my two desktop computers networked using 10base2 and they are
working nicely, now I'd like
Hello world!
I friend of mine wrote a small C program and compiled it for a Silicon
Graphics machine.
He passed me the binaries (useless) and the C source code. I'd like to
run it on my Linux system, but it needs a number of Motif header files
to be compiled. Is there something like a free
Ok guys,
I've asked this before, but I try again. I upgraded to libc6 in potato and
it hosed my JDK and a few other thing I use, so I downgraded to libc6 from
slink.
Then my time got screwed. I reinstalled timezones and set the date a time
and everything seemed fine. Except that when I need to
Hey Bob, how are things in happy valley? Anyway, I've done what you're talking
about
many times (for head-to-head linux Quaking!). Here's whatcha do: I'll assume
your
network uses the 192.168.1.0 network and your setup is this:
BoxA (192.168.1.1) BoxB (192.168.1.2)BoxC
*- On 7 May, Jens B. Jorgensen wrote about Re: Network and serial port
#!/bin/bash
while true
do
/usr/sbin/pppd /dev/ttyS0 115200 nodetach noauth proxyarp passive
asyncmap 0
192.168.1.2:192.168.1.3
done
Just curious. Why are you using an infinite loop and not the persist
pppd
On Fri, May 07, 1999 at 10:00:11AM -0400, Wayne Topa wrote:
[snip]
# Generated by liloconfig
# Specifies the boot device
boot=/dev/hda1
boot should be the drive not that partition, ie boot = /dev/hda
What do you mean by should ? I have several computers booting
I have installed Debian 2.0 on my toshiba 510, it starts loading,
but then reboot the system and start everything over again.
Any ideas?
Thanks,
Benjamin
On Fri, 7 May 1999, Bill Wilson wrote:
Running hdparm is not the only thing to consider. If you want a real
powerdown
and not a periodic cycle of disk on and off, you must shutdown stuff
that dings the disk. When I want to powerdown, I exit all such apps (this
includes Netscape, ppp, etc)
Hi
I posted this to the Debian Users Mailing List around May 1,
but to date, I have received no reply. If someone would help
me configure vgalib and zgv, I'd appreciate it.
--David
David Teague, [EMAIL PROTECTED]
Debian GNU/Linux Because software support is free, timely,
On Thu, 6 May 1999, Rahsheen Porter wrote:
I recently (this morning), had a power outtage. I started up my computer and
LILO started going nuts. Not only did it just say LI, but the cursor was
jumping all over the screen and the printer started to print.
Your disk got corrupted. The
On Fri, 7 May 1999, David B.Teague wrote:
I posted this to the Debian Users Mailing List around May 1,
but to date, I have received no reply. If someone would help
me configure vgalib and zgv, I'd appreciate it.
I dunno about zgv, but I've got one possibly useful suggestion.
locate
I have my win95 laptop connected to my linux box via a null modem serial cable
and
dial-up networking on one side, pppd on the other side.
Works like a charm. I had to write myself a custom modem.inf file for win95,
and a
couple of perl scripts for linux, but everything works beautifully now.
How does one display a UTF-8 encoded web page in Netscape 4.51?
I can display a mixed language web page OK in yudit using UTF-8 encoding
and the gnu unicode font, but I can't successfully associate this font
with UTF-8 or unicode-2-0 in Netscape's Edit/Preferences/Font setup.
So Netscape just
Brian Servis writes:
Just curious. Why are you using an infinite loop and not the persist
pppd option? I have never used ppp over serial so I may be missing
something, but it just struck me as odd.
It is. I used to use pppd as a poor man's LAN. Persist works fine.
Try (all on one line, of
-BEGIN PGP SIGNED MESSAGE-
On Fri, 7 May 1999, Javaherian, Benjamin wrote:
I have installed Debian 2.0 on my toshiba 510, it starts loading,
but then reboot the system and start everything over again.
Any ideas?
I believe this is kernel related. You could try using the boot disks
On %M 0, Fu-Dong Chiou wrote
Thanks for the info. I did used xf86config, repeatedly, but didn't seem
to set up everything correctly. Here's what I think is crucial, but not
sure how to do it correctly:
1. hsync in kHz: I choose 31.5: standard VGA, 640x480 @ 60 Hz, as mine is
a 640x480
I'm trying to get kernel 2.2.7 going on my slink box.. but i keep having
problems getting the network to work.. it seems to have problems with dhcp..
i get ..
May 6 19:46:02 TheCave dhcpcd[136]: ioctl SIOCSIFBRDADDR (ifConfig): Cannot ass
ign requested address
and i'm not sure what this is
hey,
I have a probleme to configuring smail.
If I say to smailconfig to send mail to root, all thing work,
but if I set it to send them to a user khaezzar (he is in mail group)
a get this mail :
===
!root
!0 1001
!-oem
!-f
!+
!-oMs
!localhost
!-oMr
I'm trying to get kernel 2.2.7 going on my slink box.. but i keep having
problems getting the network to work.. it seems to have problems with dhcp..
i get ..
May 6 19:46:02 TheCave dhcpcd[136]: ioctl SIOCSIFBRDADDR (ifConfig): Cannot
ass
ign requested address
1) you need PACKET
[EMAIL PROTECTED] writes:
Having X detect all the valid modes
There are an awful lot of valid modes, most of which are completely
unusable.
Hi all:
Which program will I be looking for to get the subj. working? I'm
really interested in just blanking display after some inactivity (w/o
locking it) under X.
Is xscreensaver the standard utility for that?
FWIW, I'm using Slink+Windowmaker+wdm.
Thanks!
--
Arcady Genkin
Hi,
I have a strange problem with copy and paste. When I copy from XFmail to, and
paste to GXedit or X-Chat, XFmail crashes. When I do the same from XFmail to
other apps it's working fine.
Both X-Chat and GXedit are GTK apps. Is that just a conicidence or ?
TIA
Hello
Did anyone get the Dynalink IS64PH ISDN card ( isa ) working in Slink ?
And if you did could you please tell me how you did it :)
Rene
i want to convert fromfat32 to fat16
__
Get Your Private, Free Email at http://www.hotmail.com
i want to convert fromfat32 to fat16
And you are asking us this because?
I have noticed that every so often my HD would start to whine like it was
being search. It made me curious and a ran a top and I found the a the find
utility was started by user 'nobody'. Is this a normal thing to have
processes spawned by the nobody user? Or is this a problem as I think it to
be?
You can get pine/pico/pilot binary .debs (3.96 and 4.10) from:
http://www.ompages.com/debian/pkgs/pine/pine.html
[Thanks to Santiago for making the source packages,
and to Paul for compiling and making them available.]
- Bruce
--
On Thu, 6 May 1999, Fu-Dong Chiou wrote:
Hi all,
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Fri, 7 May 1999 15:33:11 -0400, Person, Roderick wrote:
I have noticed that every so often my HD would start to whine like it was
being search. It made me curious and a ran a top and I found the a the find
utility was started by user 'nobody'. Is
Sudhir P wrote:
Hi,
Please excuse me for the wide distribution. And do excuse me for not
being able to give the exact technical terms in the following. I have
tried to explain the situation to the best extent that I can (now).
My present set up:
--
I have an i586
On Fri, May 07, 1999 at 02:38:17PM -0400, Arcady Genkin wrote:
Which program will I be looking for to get the subj. working? I'm
really interested in just blanking display after some inactivity (w/o
locking it) under X.
X can do this. Try typing xset in an xterm, and looking at the output
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Fri, 7 May 1999 15:42:50 -0500 (EST), Robert V. MacQuarrie wrote:
Has anyone been able to get xosview to run on a 2.2.x kernel system? I
It was running on my 2.2.1 kernel but when I upgraded to 2.2.6 it started
failing in the manner you
Michel Kaempf wrote:
On Mon, May 03, 1999, Kenneth Johansson wrote:
I have a problem with ftp to debian when it is configured to use nis.
Everything works OK as long as I have a normal user entry in /etc/passwd
but when I take the user account infomation from nis fptd wont allow the
Robert V. MacQuarrie wrote:
Has anyone been able to get xosview to run on a 2.2.x kernel system? I
currently have a Dual P200 system with Debian 2.1. Since updating to the
2.2.5 kernel I have not been able to use xosview at all. It starts but
does not display anything at all and I have to
On a i586 system, your cdrom is probably connected to the second IDE controller
and it will be on /dev/hdc or less likely /dev/hdd. Try using that during the
installation. /dev/cdrom is usually a link that points to /dev/hdc or /dev/hdd.
If Redhat works, boot into Redhat and look at
In foo.debian-user, you wrote:
Question: So how do I, running from a slink CD, get and install potato's apt?
If I add entries for 'unstable' in /etc/apt/sources.list, and then go into
dselect, it wants to upgrade my world to potato.
Of course, I can always just go download the deb and
- Original Message -
From: Person, Roderick [EMAIL PROTECTED]
To: debian-user@lists.debian.org
Sent: Friday, May 07, 1999 12:12 PM
Subject: Time Keeps A changin'
Then my time got screwed. I reinstalled timezones and set the date a time
and everything seemed fine. Except that when I
In pine, choose Setup, Configuration and edit personal-name.
Bob
On Fri, May 07, 1999 at 08:42:55AM -0700, Clyde Wilson wrote:
When I send a message (or reply to one) using pine and then
receive the message, the author field looks like:
To: [EMAIL PROTECTED]
instead of
Clyde Wilson
Hi. I'm trying to configure an Epson Stylus Photo Ex on a Debian 2.1 machine.
I can cat text to the device and it prints as ASCII.
Magicfilter is installed, I picked the stylus_color_720dpi-filter, is that
correct?
I tried gs, even when I ran the command manually and cat'd it do the device, all
On Fri, May 07, 1999 at 11:20:12AM -0400, Jonathan J. Lupa wrote:
Question: So how do I, running from a slink CD, get and install potato's apt?
If I add entries for 'unstable' in /etc/apt/sources.list, and then go into
dselect, it wants to upgrade my world to potato.
Of course, I can
Hi... I'd love to install Debian on my
computer and give it a whirl. I want be able to use Windows
also.. anyhow.. when i clicked on the Intel x86 installation
manual ( Under 'New Installations' at this adress: http://www.debian.org/releases/stable/)
it didn't work.. the others work fine
On Fri, May 07, 1999 at 05:34:51PM -0400, rafarley wrote:
Hi... I'd love to install Debian on my computer and give it a whirl. I want
be able to use Windows also .. anyhow.. when i clicked on the Intel x86
installation manual ( Under 'New Installations' at this adress:
1 - 100 of 101 matches
Mail list logo
