El Wed, May 30, 2001 at 05:51:29AM +0200, October contaba:
Hola !
Creo que eso era cosa del charset que se utilizase en el kernel (cp850, etc),
porque el código ascii de los caracteres extendidos no es el mismo para
diferentes charsets. Digo yo que será por eso. Te acuerdas en el MSDOS
Hola,
Pues la pregunta es si alguien sabe como hacer para que no se produzcan
escaneos en las particiones ext2 cuando se reinicia el ordenador tras
un cuelgue o algo asi.
La razon por la que me gustaria saberlo, es porque tengo un HD de 80 GB y
es una putada cada vez que se produce un corte en
David Ubeda, miércoles 30 de mayo de 2001 a la(s) 10:34:35 +0200:
En una de las particiones tuve que ponerme reiserfs para eliminar este
problema, pero hacerlo en el raiz parece mas complicado.
La partición raíz tampoco tiene que ser tan grande. Basta con
alojar /bin, /dev, /etc,
He instalado la version 4.77 del comunicador via apt.
(Tenía la 4.76 instalada a partir del .tgz de Netscape)
A la hora de iniciarse me da el siguiente mensaje:
Netscape: Ignoring unsupported format code in mailcap file: %{
(He mirado en el /etc/mailcap y no he encontrado nada raro)
Yo tengo una placa que reconoce ATA 100 y me reconoce de manera automática
que mi disco es ATA33 :-) Es decir, que si tuviera un disco ATA100 (algún
día me animaré) supongo que me lo reconocería sin problemas. Aparte, al
compilar el kernel tienes una lista de chipsets soportados, pero eso no se
si
Nas listeros
Que indexadores usais/conoceis/habeis probado, que cumplan:
* Indexar XML
* No sean de pago
* Indexar gran numero de documentos
* Que sea incremental los indices. ( a poder ser)
He probado el swish-e y
Tras instalar XFree86 4.0.3 en Debian y haber logrado configurar el
modo gráfico con mi tarjeta ATI no hay problema para arrancar las X...
si eres root.
A cualquier otro usuario no le deja arrancar desde la consola, dando el
error:
BEGIN--
(**) FontPath set to
Fernando wrote:
He instalado la version 4.77 del comunicador via apt.
(Tenía la 4.76 instalada a partir del .tgz de Netscape)
A la hora de iniciarse me da el siguiente mensaje:
Netscape: Ignoring unsupported format code in mailcap file: %{
(He mirado en el /etc/mailcap y no he
Hola... ¿alguien sabe quié paso con ese proyecto de traducción?... Gracias
--
__
[EMAIL PROTECTED]
[EMAIL PROTECTED]
[EMAIL PROTECTED]
ICQ Nº 31089968
No es oro todo lo que reluce ni toda la gente errante
Yo traduje la porcion que se me asigno y se la mande a una de las dos
presonas que dirigian la lista. Al cabo de unas semanas, que no vi ninguna
actividad, intente ponerme en contacto con esta persona y no me respondio.
Es una verdadera, pena que no haya salido adelante, pero si ahora que
lo
DEsde el kernel 2.2.12 viene el modulo para esa placa
Angel Claudio Alvarez
Investigacion Desarrollo
Gerencia de Tecnolgia
Banco Credicoop C.L.
(54)011-4891-5970
-Mensaje original-
De: Adriel Cardenas G [mailto:[EMAIL PROTECTED]
Enviado el: Miércoles, 30 de Mayo de 2001
Hola a todos!
Ante todo un saludo a todo el mundo ya que es la primera vez que escribo a
esta lista.
Bueno, pues la cosa es que quiero instalar el netscape communicator en una
Sparc con potato, pero todo lo que encuentro es para la serie 2.0 ¿alguien
sabe donde puedo apuntar con apt para
yo lo consegui despinchando el disco duro de la ATA100 y conectandolo en un
IDE normal, de esa forma, el Disco duro es hda y lo instala, luego instalas
el kernel 2.4.X y le pones las opciones pertinentes, se instala con lilo,
luego se pincha otra vez en el ATA 100 y cambias todas las
Yo la consegui reconocer con las XFree 4.0.3
ademas para aprovechar la aceleracion hay drivers nativos de nvidia
(www.nvidia.com)
Hash: SHA1
No consigo configurar la tarjeta Asus V7100 Pure en la Debian,
alguno lo ha instalado ya???
Gracias.
Hola, trate de instalar debian por red pero nada,
lo que hice fue lo siguiente, primero configura la servidor, le copie todo los 3
cd-rom de debian en la carpeta pub, disco1, disco2, disco3, ya que a las
maquinas tenia que dejarles win2 copie lo base en win2 y arranque install.bat,
en apt
El dia Tue, May 29, 2001 at 05:54:28PM -0300, esteban agulera escribio:
- HOla lista
-
- no logro poder hacer andar el flash en el konqueror, me eh bajado el
- shockwave flash 5 y no hay forma de hacerlo andar lo tengo en el mime.
-
- lo eh puesto en /usr/lib/netscape/plugins y en
El Wed, May 30, 2001 at 03:28:24PM +0200, Hector Castillo dijo:
Tras instalar XFree86 4.0.3 en Debian y haber logrado configurar el
modo gráfico con mi tarjeta ATI no hay problema para arrancar las X...
si eres root.
A cualquier otro usuario no le deja arrancar desde la consola, dando
On Tue, 29 May 2001, igor vanderlei wrote:
Alguem pode me ajudar a configurar uma placa de som via 686a on board.
ja tentei o pndcump mas ele nao encontra
olá,
a mb do meu pc usa o chipset da via:
-
[EMAIL PROTECTED]:~$
Utilizo esse mesmo sound, e apenas ativei o modulo cmpci.
Abraços
Marcelo de M. Barbosa
- Original Message -
From: Mario Olimpio de Menezes [EMAIL PROTECTED]
To: debian-user-portuguese@lists.debian.org
Sent: Wednesday, May 30, 2001 9:50 AM
Subject: Re: Placa de som Via 686a
On Tue, 29
/\
\ / Campanha da fita ASCII - contra mail html
X ASCII ribbon campaign - against html mail
/ \
On Tue, 29 May 2001, cosmo wrote:
All
Para a primeira placa de rede o arquivo /etc/network/interfaces esta
assim
:
# /etc/network/interfaces -- configuration file for
Ola lista, tenho lido as msg aqui por algum tempo mas e' a primeira vez que
mando.
Gostaria de entrar em contato com alguem que jah instalou o debian em powerpcs
da ibm (rs6000), sei que existe uma lista pra isso (debian-powerpc) mas
gostaria antes de conversar com alguem de minha lingua.
Tenho
Estou postando novamente, pois da primeira vez
meu endereco estava errado e posso ter perdido uma
eventual resposta dirigida à ele, e não à lista...
[]'s
Moreiras.
Caros:
Estou usando uma configuracao dual head
com xinerama... Ja usava algo parecido antes
de migrar da RedHat para a
O byron como assim um grupo de revisores?
Voce pode explicar mais sobre isso?
Atenciosamente
Philipe Gaspar
Em Domingo 27 Maio 2001 18:50, fabao85 escreveu:
Como o Kov me pediu pra mim mandar um
email pra lista estou mandando ..
E sobre o grupo de revisores debian-br
eu dei essa ideia pra
Pessoal,
esse axo não pegou bem para revisores... :)
Quoting Philipe Gaspar ([EMAIL PROTECTED]):
O byron como assim um grupo de revisores?
Voce pode explicar mais sobre isso?
Atenciosamente
Philipe Gaspar
Em Domingo 27 Maio 2001 18:50, fabao85 escreveu:
Como o Kov me pediu
Alguem sabe me informa se jah tem uma data aproximada pra lanca o 2.2r4 ???
ia pega o ISO do r3 mas to afim d espera o r4. (se naum for demora muito
neh... :)
Só uma perguntinha no meio do assunto: alguém pode me responder com certeza
se o Kylix vai permitir que se digite código também em C++ ? Se sim, em qual
versão ? Na versão GPL o jeito vai ser usar só pascal mesmo ???
+--+-++
| Fábio
Fábio Franco de Oliveira wrote:
+--+-++
| Fábio Franco de Oliveira | Age: 17 | - Linux user 138973 |
+--+-+---++
| Cpu: AMD K6-2 500 | Sound:
Thanks to all who responded. I now have ssh up and running. And I clearly
need to learn more about apt-get and friends. :-)
Two additional items: one question and one apology.
The question is: Are the non-USA and non-free packages on the CDs or do I
have to use the internet sites? [Not a huge
I had under the former subject.
I had originally had Debian (stable) set up with php4 and a site done with
php-nuke.
I started working on a new project that, because of certain requirenments,
was better suited for woody. So, I upgraded. During the upgrade, it
un-installed php4. After the
can anyone tell me how to get the clip in windowmaker back?
I had a crash and for some reason it's now not starting up when wmaker starts.
thanks,
Renai
kernel 2.0.36 running on a cyrix machine.
I can get the cyrix brand name but no actual cpu speed.
On Wednesday 30 May 2001 11:28, you wrote:
What cases?
--
Andrew J Perrin - [EMAIL PROTECTED] - http://www.unc.edu/~aperrin
%% Mike Pfleger [EMAIL PROTECTED] writes:
mp What keyboard are you using? I have a PC-104 kbd, and I have been
mp trying to bind the windoze and menu keys to be Mod3 and Mod4
mp modifiers, respectively.
mp What am I doing wrong?
You're trying to use xmodmap directly instead of using
D == D-Man [EMAIL PROTECTED] writes:
V == Viktor Rosenfeld wrote:
[Paul Wright confessed his use of gmx.net...]
V What about that crappy newspaper they sent out every week or
V so? Is there a way to disable it or don't you count that as
V spam?
It's not spam, as you do have a
When I upgraded to woody one of the services that were installed was
'lwresd'
What is that? Plus, now when I'm using dselect, it says that lwresd
recommends libnss_lwres. But, libnss_lwres is unavailable. Is there a way
to keep this from coming up? or, where can I get it to install?
Wayne
THAT WAS ITYES!!!
Thank you so much!
Wayne
-Original Message-
From: Kurylo [mailto:[EMAIL PROTECTED]
Sent: Tuesday, May 29, 2001 4:09 PM
To: debian-user
Subject: Re: php4 and woody
Unlike php4, to get php3+mysql to work you have to edit the php3.ini file.
php3.ini is in
Hi. I have problems wih cron from the testing archives. When I edit a
crontab
file with `crontab -e', I must restart cron before the changes are applied
(This means that I must `killall cron ; cron' before it works). I find
this to
be *VERY* annoying, and I was wondering if any of you had
Howdy,
I just bought a postscript capable inktjet printer from HP
(HP1220C) which turns out to be a regular PCL3 enhanced printer
with some Windows software that does the conversion from Postscript
to PCL3 enhanced (HP Belgium wasn't even aware this of this software only
feature -( ).
Anyway
On 30 May 2001 11:57:48 +1000, Steve Kieu wrote:
killall -9 navigator-smoti
It says, no process killed. But if I run top or ps -A
the process name is there, navigator-smoti, i can only
kill it use its pid use kill (not killall)
You have your process name truncated, ps does this sometimes.
Hi!!
I recently upgraded my potato (apt-get upgrade) and all is OK but HOME and END
keys
in a bash terminal in Xwindow DO NOT work only beep. In any other program
(Abiword,
gnumeric, Netscape, etc) the keys work fine.
What is the problem?
Bash i do not think so... in console is
Am 30. May, 2001 schwäzte Wayne Sitton so:
When I upgraded to woody one of the services that were installed was
'lwresd'
What is that? Plus, now when I'm using dselect, it says that lwresd
man lwresd
lwresd is the daemon providing name lookup services to clients that use
the BIND
Am 29. May, 2001 schwäzte will trillich so:
when i was out of town last week, and nobody was at the house,
i get this log message from logcheck reflecting some firewall
block--
To: [EMAIL PROTECTED]
Subject: server 05/23/01:13.02 system check
From: root [EMAIL PROTECTED]
Hi List
Aren't the LaTeX fonts scalable post-script fonts? I wonder if it is
possible to use, say, the cm-family font just like normal X-fonts, eg.
for the GIMP. The idea comes from my need for images containing text.
Using these images in Latex looks ugly if they use other fonts than the
Hi list
Now that I can transfer my downloaded .debs in a .tar file, I wonder if
I could create this .tar file saving disk space, e.g. in the following
way
pseudo-code
create a tar file (touch packages.tar?)
for *.deb in this directory
1.) add it to the tar file
2.) rm this .deb
end
I installed Blackmail on my Progeny Debian box and at the moment I have it
set for passive mode so it warns me if a message would have been blocked.
I use it with fetchmail/exim. It is working well, but it has a problem
with mailing lists, including this one. The problem is that Blackmail will
You can compress all .deb files into one zipped tar file
with only one command. See the manual page of tar. You
don't need to write code with a for-loop. I think it's
tar czf packages.tar.gz debdir
with debdir the directory containing all your .deb files,
and packages.tar.gz the target zipped
On Tue, 29 May 2001 15:25:37 -0700, Mike Pfleger [EMAIL PROTECTED] said:
Mike What am I doing wrong?
Have you tried using a real keysym for the menu key? I don't think
'Menu' is a real keysym -- try 'Multi-key' or 'Super_R' or 'Hyper_R',
and then bind ModN (where N=(1..5)) to that keysym.
My
On Wed, May 30, 2001 at 10:36:13AM +0200, Joerg Johannes wrote:
How would this look for the csh?
I'm going to assume you're just plain unaware of this:
csh programming Considered Harmful
Somebody can probably provide a link to a copy of the essay. csh
scripts are a majorly Bad Idea[tm]. It has
hi,
are the following 2 cards supported yet:
Matrox MARVEL G450 (card has onboard tv-tuner)
Matrox G450
thanx
---
Andor Demarteau
[EMAIL PROTECTED]
---
Andrew Suffield wrote:
On Wed, May 30, 2001 at 10:36:13AM +0200, Joerg Johannes wrote:
How would this look for the csh?
I'm going to assume you're just plain unaware of this:
csh programming Considered Harmful
Somebody can probably provide a link to a copy of the essay. csh
scripts
Well, I know how to use tar in general. Zipping the .debs is not
necessary because they are already zipped. What I meant is: The .tar
file takes the same amount of space as the .debs themselves. So after
having tarred them , I need twice the space as before. So I want to
delete each .deb after
Why does KDE for potato, depend on
libssl096?
libssl096 is in woody and sid not potato (according
to debian package search).
has anybody got KDE to work in potato? if so could
the apt lines please.
P.s
If possible could you
email me aswell as the list as this has been sent to two
On Wed, 30 May 2001, A. Demarteau (linux rules!) wrote:
hi,
are the following 2 cards supported yet:
Matrox MARVEL G450 (card has onboard tv-tuner)
Matrox G450
The plain G450 works, but you might need to get the X4 drivers from the
Matrox page (at least this was the case for Xfree 4.0.2,
Andrew Suffield wrote:
On Wed, May 30, 2001 at 10:36:13AM +0200, Joerg Johannes wrote:
How would this look for the csh?
I'm going to assume you're just plain unaware of this:
csh programming Considered Harmful
Somebody can probably provide a link to a copy of the essay. csh
--(http://www.inter-cemetery.com)??
I'm using debian for something about 10 month and
after that I have a few sugestions :)
1. The Apache web server witch is avaible in
stable distribution is very old. I've tried to add
iso-8859-2 charset support to apache, but browser
still showed that page in iso-8859-1 (not in iso-
8859-2).
I'm using debian for something about 10 month and
after that I have a few sugestions :)
1. The Apache web server witch is avaible in
stable distribution is very old. I've tried to add
iso-8859-2 charset support to apache, but browser
still showed that page in iso-8859-1 (not in iso-
8859-2).
On Wed, May 30, 2001 at 03:13:21PM +1000, Renai LeMay wrote:
can anyone tell me how to get the clip in windowmaker back?
I had a crash and for some reason it's now not starting up when wmaker starts.
thanks,
Renai
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of
On Wed, May 30, 2001 at 01:14:22PM +0200, [EMAIL PROTECTED] wrote:
I'm using debian for something about 10 month and
after that I have a few sugestions :)
1. The Apache web server witch is avaible in
er FYI witch and which mean very different things in english ;-)
stable distribution is
And yo was Joerg Johannes heard to yodel:
Well, I know how to use tar in general. Zipping the .debs is not
necessary because they are already zipped. What I meant is: The .tar
file takes the same amount of space as the .debs themselves. So after
having tarred them , I need twice the space as
On Wed, May 30, 2001 at 01:14:22PM +0200, [EMAIL PROTECTED] wrote:
I'm using debian for something about 10 month and
after that I have a few sugestions :)
1. The Apache web server witch is avaible in
stable distribution is very old. I've tried to add
iso-8859-2 charset support to apache,
Joerg Johannes [EMAIL PROTECTED] writes:
JJ Now that I can transfer my downloaded .debs in a .tar file, I wonder if
JJ I could create this .tar file saving disk space, e.g. in the following
JJ way
JJ
JJ pseudo-code
JJ create a tar file (touch packages.tar?)
JJ for *.deb in this directory
JJ
Joerg Johannes [EMAIL PROTECTED] writes:
JJ Aren't the LaTeX fonts scalable post-script fonts?
Not generally; they use a meta-language called METAFONT, which
includes much more information than PostScript fonts use. (For
example, 5-point Computer Modern scaled to 20 points looks much
different
[EMAIL PROTECTED] wrote:
I've got a box running stable with apt 0.5.3 out of testing. It appears that
the lists dir has moved from /var/state/apt/ to /var/lib/apt/.
This version allows apt-getting a specific version of a package as well as a
package from a specific dist, e.g. stable, testing,
[EMAIL PROTECTED] wrote:
I'm using debian for something about 10 month and after that I have a
few sugestions :)
Most of these should be wishlist bugs rather than posts to debian-user,
so that the maintainers who can actually do something about them see
them. See URL:http://bugs.debian.org/.
3.
Interesting - I'm afraid I'm out of ideas, unless you can get someting
from the BIOS on startup (some BIOSes allow you to get system information
pre-boot).
Andy
--
Andrew J Perrin - [EMAIL PROTECTED] -
Dietz Proepper [EMAIL PROTECTED] wrote:
that's my first mail to that list - so plz be patient with me ;). Sould
the following be already known - sorry too.
The bug tracking system is your friend :)
http://bugs.debian.org/96864
http://bugs.debian.org/97252
--
Colin Watson
Its not the processes in themselves which knowledge must be hidden of, but
the parameters to processes. It might contain confidential information like
encrypted bank pins, etc
On Wednesday 30 May 2001 04:35, Dave Sherohman wrote:
On Tue, May 29, 2001 at 09:52:55PM -0400, Vlad wrote:
1. The Apache web server witch is avaible in
stable distribution is very old. I've tried to add
iso-8859-2 charset support to apache, but browser
still showed that page in iso-8859-1 (not in iso-
8859-2). I've sloved my problem by installing deb
package from testing distribution. So i sugest
Branden Robinson [EMAIL PROTECTED] wrote:
- Forwarded message from MRZ [EMAIL PROTECTED] -
From: MRZ [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: XF86 4.x?
Date: Mon, 28 May 2001 14:34:59 -0700
Message-Id: [EMAIL PROTECTED]
Hi.
I understand you're the maintainer of the XFree86
On Wed, May 30, 2001 at 03:08:18PM +0200, Alwyn Schoeman wrote:
Its not the processes in themselves which knowledge must be hidden of, but
the parameters to processes. It might contain confidential information like
encrypted bank pins, etc
any program that requires sensitive information
Installation of Ximian Gnome Desktop failed, left problems I can't resolve.
Last week I started download/installation of the full ximian gnome
desktop from the ximian web site. The lengthy download timed out at
about 50%. When restarted it completed the download of 319 files then
the
Andy Davidson [EMAIL PROTECTED] wrote:
Thanks to all who responded. I now have ssh up and running. And I clearly
need to learn more about apt-get and friends. :-)
Two additional items: one question and one apology.
The question is: Are the non-USA and non-free packages on the CDs or do I
have
Hi,
I have been using xdm as my display manager recently on Debian
Potato 2.2. I would like to replace it by gdm. For this I have the
following queries :-
1) Recently I read in this mailing list that to use gdm I have to remove
xdm. Cannot both of them coexist? i.e. both of them are
okay, i solved this myself...pretty easy
apt-get install gtk-engines-pixmap
sorry for asking such a dumb question...
On Wed, 30 May 2001, vester wrote:
hi, it's me again...i still haven't figured this one out:
problem is that apparently gtk themes aren't working anymore. that is,
only
Hi Joseph,
On Wed, May 30, 2001 at 07:49:46PM +0530, Joseph wrote:
Hi,
I have been using xdm as my display manager recently on Debian
Potato 2.2. I would like to replace it by gdm. For this I have the
following queries :-
1) Recently I read in this mailing list that to use gdm I have
techlists [EMAIL PROTECTED] writes:
I had originally had Debian (stable) set up with php4 and a site done with
php-nuke.
I started working on a new project that, because of certain requirenments,
was better suited for woody. So, I upgraded. During the upgrade, it
un-installed php4. After
Joerg Johannes [EMAIL PROTECTED] writes:
The problem is: this box is not my own, in fact, it is not even a debian
one (Sun Solaris) and, the worst of all: It only runs csh because the
admin does not like bash (I hate csh, too)
Solaris boxes have ksh, which is a pretty solid shell. I like
Bart Martens [EMAIL PROTECTED] writes:
I wouldn't know why you want them both to coexist. Do you want to login
twice? ;-)
No, but maybe you want to use gdm on the actual console, but use xdm to
serve XDMCP to X servers that are not on the console (i.e., Windows X
servers).
I once ran into a
On Wed, 30 May 2001 04:17:42 A. Demarteau (linux rules!) wrote:
are the following 2 cards supported yet:
Matrox MARVEL G450 (card has onboard tv-tuner)
Matrox G450
I believe basic support for both these cards is there, although some of it
may be a little bit unstable. (I'm currently using a
Hi there,
I don't know the reason of this message but I've had the same if I
mistakenly MASQ'ed
doubly, i. e. packet went throu by two rules with -j MASQ (one from FORWARD
and one from OUTPUT chain).
Regards for all
Chris
- Original Message -
From: Gabor Gludovatz [EMAIL PROTECTED]
To:
Hi,
I have installed the Debian GNU/Linux 2.2 r1 on my machine. A few days
after the installation I noticed some strange messages from the kernel
(samples below) concerning the virtual memory (do_try_to_free_pages failed
for...).
I have a second distribution on my machine (a RedHat GNU/Linux),
I
i had some problems with ximian too (on woody though) ...
for the alternative installation (the apt-get one) have you added the
particular ximian server to your sources-list? i don't remember the
address but you can find it at ximian.com
i remember in the beginning they actually forgot to add
Joseph [EMAIL PROTECTED] writes:
1) Recently I read in this mailing list that to use gdm I have to remove
xdm. Cannot both of them coexist? i.e. both of them are installed. If
yes then what precautions do I have to take?
The software itself can coexist, but on Debian gdm conflicts with
On Wed, May 30, 2001 at 05:28:18PM +0200, BURLET Frederic wrote:
| Hi,
|
| I have installed the Debian GNU/Linux 2.2 r1 on my machine. A few days
| after the installation I noticed some strange messages from the kernel
| (samples below) concerning the virtual memory (do_try_to_free_pages failed
|
On Wed, 30 May 2001, D-Man wrote:
I don't know what causes this, but I have seen it on one of my boxes
-- the i486 with 8 MB RAM (and 32MB swap). I haven't seen it on the
AMD Duron (128MB RAM)
How much memory do you have on this K6?
I have 32MB RAM and 72MB swap.
(BTW, good job of
BF Hi,
BF I have installed the Debian GNU/Linux 2.2 r1 on my machine. A few days
BF after the installation I noticed some strange messages from the kernel
BF (samples below) concerning the virtual memory (do_try_to_free_pages failed
BF for...).
BF I have a second distribution on my machine (a
On Tue, 29 May 2001, Andy Davidson wrote:
Thanks to all who responded. I now have ssh up and running. And I clearly
need to learn more about apt-get and friends. :-)
Two additional items: one question and one apology.
The question is: Are the non-USA and non-free packages on the CDs or do I
Hello,
I've got a noisy phone line at home causing dialup problems. I can now connect
successfully by extending the dialup time (chat -t 120...thanks John H.).
The problem now is that my connection drops sometimes after I've connected to my
ISP. Is there some parameter or option I can set that
i have ext2 but now i want to switch to reiserfs
i have an empty partition, which is not being used
now, i would like to copy the contents of /dev/hda5 (existing ext2
partition) to /dev/hda8 (new empty reiserfs partition). but i donot know
what is the best way to do it.
any hints?
thanx,
I have a firewall running Debian stable that I don't want to upgrade to
testing. I see that Open SSH version 2.5.2 is in testing and unstable and
that 1.2.3 is the version in stable. Am I correct in thinking that the
version for stable available at security.debian.org has the bug fixes
On Wed, May 30, 2001 at 01:30:54AM -0700, [EMAIL PROTECTED] wrote:
Am 29. May, 2001 schwäzte will trillich so:
Security Violations
=-=-=-=-=-=-=-=-=-=
May 23 12:51:01 server kernel: Packet log: input DENY eth1 PROTO=1
192.168.1.62:3 208.33.90.85:13 L=56 S=0x00 I=30114
Amardeep Singh [EMAIL PROTECTED] writes:
i have ext2 but now i want to switch to reiserfs
i have an empty partition, which is not being used
now, i would like to copy the contents of /dev/hda5 (existing ext2
partition) to /dev/hda8 (new empty reiserfs partition). but i donot know
what is the
On Tue, May 29, 2001 at 07:49:46PM -0400, Arcadio A. Sincero Jr. wrote:
Hello list,
wrong list. try pgsql-general@postgresql.org instead.
I'd like to set up Postgresql so that users can have read-only access to a
database. Right now, I only know how to set it so a user can have all or
On Wed, May 30, 2001 at 12:04:01PM +0100, Ian Lee wrote:
Why does KDE for potato, depend on libssl096?
libssl096 is in woody and sid not potato (according to debian package search).
helli-phyno...
has anybody got KDE to work in potato? if so could the apt lines please.
# security stuff for
On Thu, May 31, 2001 at 05:36:47PM +1000, Joel Mayes wrote:
Run the wmpref program, the 7th icon will be workspace navigation Features
click on this, and there will be two icons down the right hand side of the box
on of these enables/disable the application dock, the other enables/disables
the
On Wed, May 30, 2001 at 05:28:18PM +0200, BURLET Frederic wrote:
Hi,
I have installed the Debian GNU/Linux 2.2 r1 on my machine. A few days
after the installation I noticed some strange messages from the kernel
(samples below) concerning the virtual memory (do_try_to_free_pages failed
On Wed, May 30, 2001 at 04:04:39AM -0800, Ethan Benson wrote:
On Wed, May 30, 2001 at 01:14:22PM +0200, [EMAIL PROTECTED] wrote:
3. In new deb package of apache 1.3.19 every
configuration is made in one file
(/etc/apache/httpd.conf). I segest to make it like
in version 1.3.9
i would
On Wed, May 30, 2001 at 05:50:44AM -0400, John S. J. Anderson wrote:
SNIP
Have you tried using a real keysym for the menu key? I don't think
'Menu' is a real keysym -- try 'Multi-key' or 'Super_R' or 'Hyper_R',
and then bind ModN (where N=(1..5)) to that keysym.
My Dvorak xmodmap file is at
Has anyone got a scripted jumpstart to work? I.E., for a very
standard config things such as keyboard type, packages, etc are
pre-configured and install/configure automatically?
:wq!
---
Robert L. Harris|
Robert L. Harris [EMAIL PROTECTED] wrote:
Has anyone got a scripted jumpstart to work? I.E., for a very
standard config things such as keyboard type, packages, etc are
pre-configured and install/configure automatically?
You could try this (although I admit I haven't), available in testing
and
1 - 100 of 176 matches
Mail list logo
