I have dl'd some files that have an .mp3 extension. When I run the
'file' command the result is:
MPEG 1.0 layer 3 audio stream data, 128 kBit/s, 44.1 kHz, mono
MPEG 1.0 layer 3 audio stream data, 128 kBit/s, 44.1 kHz, jstereo
None of my mp3 players will play these files. I've tried mp3blaser,
On Mon, 2002-06-03 at 11:38, Keith Winston wrote:
On Mon, Jun 03, 2002 at 05:53:25PM +0200, Paul Huygen wrote:
I have a computer that was connected to the Internet over ethernet with
a fixed IP address. Recently the network manager requested to change
to DHCP, and I cannot find out how I
On Mon, Jun 03, 2002 at 05:53:25PM +0200, Paul Huygen wrote:
Hello,
I am a bit reluctant to ask this seemingly simple question, but I
could not find the answer in the docs:
I have a computer that was connected to the Internet over ethernet with
a fixed IP address. Recently the network
Hello!
Do you know about --enable-gui in mplayer?
i wanna enable this option, but the configure script fails. It do not
find the gtk ... How can i tell it the PATH? What the option??
Thanks
--
-
thesirbr
Success!
I finally got ftp to work between Debian and the mac-osx. The problem
was that the ip address I assigned the mac wasn't the same block.
Thanks for all the advice. (and I sure feel stupid)
But I was still puzzled as to why netatalk wouldn't work; I couldn't
mount at all. So I plugged in
Debian 3.0
Kernel 2.4.18
KDE
Mozilla 0.9.9
OpenOffice 1.0
Last week, I essentially added fonts in order to be able to print in
Russian. After which, I noticed the following problem with OpenOffice.
The entire menu panel as well as all the drop down menus (fonts, font
size, location) have
Hi all,
How to reject mail with from like this: at a Debian GNU/Linux box
and Exim?
With procmail?
TIA,Paulo Henrique.
--
Paulo Henrique B de Oliveira
Gerente de Operações - Linux Solutions - http://www.linuxsolutions.com.br
O maior conteúdo de
O == O Senhor [EMAIL PROTECTED] writes:
OHello! Do you know about --enable-gui in mplayer? i wanna enable
O this option, but the configure script fails. It do not find the gtk
O ... How can i tell it the PATH? What the option??
Make sure you have the gtk+ development packages. Probably
Software installation question
I finally got Debian with X running on an old Compaq box. I got a copy of
StarOffice (5.2) as a downloaded file and installed it by running the very
large file named:
so-5_2-ga-bin-linux-en.bin..bin
I was thrilled that I got my first piece of software
On Monday 03 June 2002 01:00 pm, O Senhor wrote:
Hello!
Do you know about --enable-gui in mplayer?
i wanna enable this option, but the configure script fails. It do not
find the gtk ...
I'm guessing you need libgtk1.2 and libgtk1.2-dev.
apt-cache search libgtk
How can i tell it
Hi Everyone,
I'd like to be able to view a UML Model that is available for download
in Rational Rose Format from:
http://www.hl7.org/Library/data-model/RIM/modelpage_non.htm
Rational Rose is a very expensive software product and I was wondering
if anyone else has experienced this problem (that
Hi..
I am trying to boot a SuSE partition on hdb1 using grub..I have the
following lines in menu.lst
title suse2
root(hd1,0)
kernel /boot/vmlinuz root=/dev/hdb1 ro hdc=scsi
(END)
On bootup the system starts to load and then I get a kernel panic
message and the system locks up...Could
D.J. Bolderman [EMAIL PROTECTED] writes:
In /etc/inittab i have the following line to start my adsl connection:
a1:35:once:/usr/sbin/adsl start
However, during bootup this line is not executed, because i still have to
start my connection manually. I can't find anything in the logs either.
Apologies for this just-barely-debian-related post.
I've done the usual googling, but haven't turned up anything. Running
smbclient -L 10.0.0.101 on my debian box reveals:
Domain=[WORKGROUP] OS=[Windows 5.1] Server=[Windows 2000 LAN Manager]
Sharename Type Comment
Thanks, i did the follow:
# apt-get install libgtk2.0-0
Reading Package Lists... Done
Building Dependency Tree... Done
Sorry, libgtk2.0-0 is already the newest version.
0 packages upgraded, 0 newly installed, 0 to remove and 123 not
upgraded
Do you have another idea?
Thanks!!
On Mon,
On 2002-06-03 12:45 +, Elizabeth Barham [EMAIL PROTECTED] wrote:
Hi Everyone,
I'd like to be able to view a UML Model that is available for download
in Rational Rose Format from:
http://www.hl7.org/Library/data-model/RIM/modelpage_non.htm
Rational Rose is a very expensive software
I do not have nothing in LD_LIBRARY_PATH variable.
The MPlayer is very, very good! The only video program, that is free,
and i can see my videos (.mpg, .asf, .avi)... just fine! I want just a
nice gui... if you know about another one
Thanks!
On Mon, 2002-06-03 at 14:46, Oleg wrote:
On Sun, 2 Jun 2002, I wrote:
I'm not sure if this is related to my upgrade from stable to unstable, but
since doing that, WordPerfect 8 opens its document window larger than my
800x600 screen. It always used to open a 600x600 or so document window;
now it's about 900x600.
I still don't know
On Monday 03 June 2002 05:01 am, Paul Johnson wrote:
hey ballo, for the last couple of days, your posts are showing up as msg.pgp
attachments; i.e., the attachments have to be viewed in order to see the msg.
ben
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe.
In article [EMAIL PROTECTED],
Colin Watson [EMAIL PROTECTED] wrote:
On Mon, Jun 03, 2002 at 11:30:15AM +0100, Dougie Nisbet wrote:
I've just discovered I can get this list as a newsgroup. I tried this
about a year ago when I first started using Debian, but it didn't
work, so since then I've
On Monday 03 June 2002 02:01 pm, Tommi Komulainen wrote:
On the topic of free UML modeling software, I've tried ArgoUML and
Poseidon, but unfortunately they aren't quite comparable to Rose. Are
there some other UML tools I've missed? (No, dia or kuml don't count.)
What do you get from UML,
You also need libgtk*-dev, as me and Hubert already told you.
Oleg
On Monday 03 June 2002 02:00 pm, O Senhor wrote:
Thanks, i did the follow:
# apt-get install libgtk2.0-0
Reading Package Lists... Done
Building Dependency Tree... Done
Sorry, libgtk2.0-0 is already the newest version.
0
O == O Senhor [EMAIL PROTECTED] writes:
O Thanks, i did the follow:
O # apt-get install libgtk2.0-0
O Reading Package Lists... Done
O Building Dependency Tree... Done
O Sorry, libgtk2.0-0 is already the newest version.
O 0 packages upgraded, 0 newly installed, 0 to remove and 123 not
O upgraded
I keep getting blank messages sent from root ... I did a little digging
around and found out that these are sent by /etc/cron.daily/5snort. I
think this is debian specific, since it gets my e-mail address from
/etc/snort/snort.debian.conf. The variable is DEBIAN_SNORT_STATS_RCPT,
and the
I do not have nothing in LD_LIBRARY_PATH variable. The MPlayer is
very, very good! The only video program, that is free,
and i can see my videos (.mpg, .asf, .avi)... just fine! I want just a
nice gui... if you know about another one Thanks!
I am very happy with the unofficial
Are
there some other UML tools I've missed? (No, dia or kuml don't count.)
What is wrong with dia? Is it not compatible to Rational? Is it
possible to write a converter between Rational and dia or
whatever-your-favourite-is or an XML file? (Not sure what format dia or
Rational are.)
Brian
OK let me re-phrase my question!
How can I turn a bin package into a Debian package so that apt-get install
to run it ??
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
On Mon, Jun 03, 2002 at 02:34:01PM +, Paulo Henrique Baptista de Oliveira
wrote:
Hi all,
How to reject mail with from like this: at a Debian GNU/Linux box
and Exim?
With procmail?
TIA,Paulo Henrique.
Well, I am biased, but you can get a nice
On Mon, Jun 03, 2002 at 06:50:35PM +0100, Ted wrote:
Hi..
I am trying to boot a SuSE partition on hdb1 using grub..I have the
following lines in menu.lst
title suse2
root(hd1,0)
kernel /boot/vmlinuz root=/dev/hdb1 ro hdc=scsi
(END)
On bootup the system starts to load and then I
Ted wrote:
Hi..
I am trying to boot a SuSE partition on hdb1 using grub..I have the
following lines in menu.lst
title suse2
root(hd1,0)
kernel /boot/vmlinuz root=/dev/hdb1 ro hdc=scsi
(END)
On bootup the system starts to load and then I get a kernel panic
message and the system locks
Hello,
These is the gtk libraries that i have instaled:
# dpkg --list | grep libgtk
ii libgtk-common 2.0.3-1 Dummy package for upgrading libgtkx.x-common
ii libgtk1.2 1.2.10-12 The GIMP Toolkit set of widgets for X
ii libgtk1.2-comm 1.2.10-11 Common files for the GTK+ library
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Saturday 03 August 2002 11:59 am, Phil wrote:
OK let me re-phrase my question!
How can I turn a bin package into a Debian package so that apt-get install
to run it ??
Greetings Phil:
No, you can not turn this into a .deb file. This is a
You are in charge of funding medical research for an imaginary country.
There are 11 diseases in this country. Of disease sufferers, 80%
suffer from disease A, 11% from disease B, and 1% each suffer from each of
the remainin 8 diseases C-K. Every $1 billion you spend on researching a
disease
* Paul Johnson ([EMAIL PROTECTED]) [020603 08:34]:
iptables just confuses me at times.
I'm trying to figure out how to forward all packets hitting this machine
on one port to a port on another machine inside my network. I'm kinda
stumped.
$IPTABLES -t nat -A PREROUTING -i $EXT_IF -p tcp
s/not\s+//;
--
Andrew J Perrin - http://www.unc.edu/~aperrin
Assistant Professor of Sociology, U of North Carolina, Chapel Hill
[EMAIL PROTECTED] * andrew_perrin (at) unc.edu
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
On Fri, May 31, 2002 at 08:37:45AM -0700, Jeff wrote:
I use OpenOffice as well, but now and then I get a Word doc that
crashes OpenOffice when opening. I then fire up VMWare and start
Jeff,
I don't have enough time to test every type of Word doc with OOo. If you
are able to reliably make OOo
On Mon, Jun 03, 2002 at 11:40:57AM -0700, Brian Rose wrote:
What is wrong with dia? Is it not compatible to Rational?
I hobble along with dia. While I can't comment on its compatibility
with Rational Rose, it does have some definite problems in the UML
template. Two that spring to mind (as of
[EMAIL PROTECTED] wrote:
Ted wrote:
Hi..
I am trying to boot a SuSE partition on hdb1 using grub..I have the
following lines in menu.lst
title suse2
root(hd1,0)
kernel /boot/vmlinuz root=/dev/hdb1 ro hdc=scsi
(END)
On bootup the system starts to load and then I get a kernel panic
On 2002-06-03 14:22 +, Oleg [EMAIL PROTECTED] wrote:
On Monday 03 June 2002 02:01 pm, Tommi Komulainen wrote:
On the topic of free UML modeling software, I've tried ArgoUML and
Poseidon, but unfortunately they aren't quite comparable to Rose. Are
there some other UML tools I've
I found dia to be _much_ easier and practical to use, as opposed to Rational -
don't miss dia2code which does a decent job.
There is another tool called ToghetherJ - but AFAIK and used them, both Rational
or Toghether do not handle well C++ but java.
On Mon, 3 Jun 2002, Tommi Komulainen wrote
On Mon, Jun 03, 2002 at 12:09:35PM -0700, Jaye Inabnit ke6sls wrote:
#for OpenOffice debs
#deb http://apt-proxy.sourceforge.net/openoffice unstable main contrib
#deb-src http://apt-proxy.sourceforge.net/openoffice unstable main contrib
Sorry, we were asked to take that mirror down. Please
Makes me think of http://ars.userfriendly.org/cartoons/?id=19990807
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
On Mon, Jun 03, 2002 at 05:01:31AM -0700, Paul Johnson wrote:
iptables just confuses me at times.
iptables confuses me all the time :))
I'm trying to figure out how to forward all packets hitting this
machine
on one port to a port on another machine inside my network. I'm kinda
stumped.
Thanks for all the input. I went with artsd, which kind of makes sense since
I'm under KDE. The debian packs worked great, and it's been playing mp3s
uninterrupted for two days. With Esound I'd have to restart several
times a day.
--
Alex Polite
http://plusseven.com/gpg/
--
To UNSUBSCRIBE,
O == O Senhor [EMAIL PROTECTED] writes:
O Hello,
O These is the gtk libraries that i have instaled:
O # dpkg --list | grep libgtk
O ii libgtk-common 2.0.3-1 Dummy package for upgrading libgtkx.x-common
O ii libgtk1.2 1.2.10-12 The GIMP Toolkit set of widgets for X
O ii
I have an ISA network card that I am trying to configure in Debian.
It is a Winbond 89c905 chip. (I think that's the right model number.)
According to the Ethernet HOWTO, it is supported by the ne.o module,
but I need to know the base address to pass as an argument. Does anyone
know how I can
On Mon, Jun 03, 2002 at 02:31:56PM -0500, Dave Sherohman wrote:
On Mon, Jun 03, 2002 at 11:40:57AM -0700, Brian Rose wrote:
What is wrong with dia? Is it not compatible to Rational?
I hobble along with dia. While I can't comment on its compatibility
with Rational Rose, it does have some
So...
locale gives:
[EMAIL PROTECTED]:~$ locale
LANG=C
LC_CTYPE=
LC_NUMERIC=C
LC_TIME=C
LC_COLLATE=C
LC_MONETARY=C
LC_MESSAGES=C
LC_PAPER=C
LC_NAME=C
LC_ADDRESS=C
LC_TELEPHONE=C
LC_MEASUREMENT=C
LC_IDENTIFICATION=C
LC_ALL=
locale -a gives:
[EMAIL PROTECTED]:~$ locale -a
C
POSIX
bokmal
On 2002-06-03 11:40 +, Brian Rose [EMAIL PROTECTED] wrote:
Are
there some other UML tools I've missed? (No, dia or kuml don't count.)
What is wrong with dia? Is it not compatible to Rational? Is it
possible to write a converter between Rational and dia or
whatever-your-favourite-is
In muc.lists.debian.user, you wrote:
Ted wrote:
Hi..
I am trying to boot a SuSE partition on hdb1 using grub..I have the
following lines in menu.lst
title suse2
root(hd1,0)
kernel /boot/vmlinuz root=/dev/hdb1 ro hdc=scsi
On bootup the system starts to load and then I get a kernel
I'm having a problem with apsfilter.
I'm running Woody. My printer is a HP LaserJet 5MP. This is a postscript
printer that also happens to support the Apple Mac.
Before I installed apsfilter I could get nicely formatted prints of source
files from emacs by specifying postscript, but I could
Right!!!
I did install the libgtk1.2-dev and works fine!!!
thanks!!!
On Mon, 2002-06-03 at 16:50, Hubert Chan wrote:
O == O Senhor [EMAIL PROTECTED] writes:
O Hello,
O These is the gtk libraries that i have instaled:
O # dpkg --list | grep libgtk
O ii libgtk-common
On 2002-06-03 12:34 +, Florentin Ionescu [EMAIL PROTECTED] wrote:
I found dia to be _much_ easier and practical to use, as opposed to Rational -
don't miss dia2code which does a decent job.
There is another tool called ToghetherJ - but AFAIK and used them, both
Rational
or Toghether do
trying too put my screen size too its reg size picture too large what do i do
please, janet meche
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
DavidMark, thanks for your explanation. I changed the runlevel to 2 and now
it works. I'll leave it that way, until i've learned some more about those
start scripts :)
Thanks
Dick
- Original Message -
From: David Z Maze [EMAIL PROTECTED]
To: debian-user@lists.debian.org
Sent: Monday,
Thanks, but i did compiled it, and works fine! Why the mplayer program
are not in Debian release??? I did compiled, and maybe, can i make the
.deb package... but if someone else already did the job, why we do not
have the .deb in Debian official site
On Mon, 2002-06-03 at 16:45, Joris
s/not\s+//;
I appreciate the good-natured jibe. I didn't think the analogy to the
Debian release process was so far-fetched, but it appears that it is.
I never understood people who claim that to relase Woody for mainstream
architectures (essentially i386 and PPC) before releasing it for
Hi,
As a newbie, I've been struggling to get my VIA 8233 onboard sound
working on my freshly installed Debian Woody system. So far I've managed
to get my USB mouse working, compiled from source the Linux kernel to
2.4.18 etcetera All this within a weeks time. But now I'm stuck with the
audio.
Hi!
I try to keep two machines running Debian v 3.0 the same, essentially
mirrors of one another. But stupid me, i probably messed up the order and
installed Heartbeat, Postfix and MySQL with different sequence on each
computer. Now i have same system users postfix, haclient and mysql with
On Mon, 3 Jun 2002, Bert van Ooijen wrote:
As a newbie, I've been struggling to get my VIA 8233 onboard sound
working on my freshly installed Debian Woody system.
According to the Documentation/sound/VIA-chipset file in the linux src
directory, the VIA chipset is flaky (even under other OS's);
I believe i could quite easily just find files belonging to specific
user/group and change them appropriately.
Yes, you are right. Ask here again if 'man find' doesn't enlighten you
(I'm too lazy to look up the options right now.)
But are there some hidden rocks i could run into doing so?
Hi.
I have installed Debian on an older system (Cyrix 6x86, Tyan Tomcat
430HX) whose BIOS is brain dead. It will not accept a year greater than
1999. Unfortunately, there is not a BIOS update past the one I have
(v2.22, 11/96) [ Rant: Actually, there is an update which fixes a ton
of stuff
Hi all,
Still setting up my debian system :)
I have to setup the proftpd server allowing users from the group 'ftp' only
to acces the ftp directory, and other users to access their home-dirs and
the ftp directory.
I've created the dedicated ftp users and put them in the group 'ftp' they
are
Well, I can't make the claim that I understood the analogy, so my
apologies for not grasping the connection.
I have no interest in commenting on decisions about release dates, since
that is very much in others' areas of expertise. The question of the value
of social equality, though, is in my
[EMAIL PROTECTED] writes:
[I'm] trying to put my screen size to its reg size picture. [It's
currently] too large. [W]hat do i do, please?
Hi Janet,
I imagine you are referring to your XServer's default resolution? If
this is the case, you should adjust the settings in XF86Config
(usually
Thanks for several helpful suggestions. I chose sysutils todos.
The man page does not indicate that this can be run as a filter, but it
seems to work.
--
Paul E Condon
[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble?
-Original Message-
From: Paul Miller [mailto:[EMAIL PROTECTED]
Debian could standardize this, but why? How often to you
really watch your system reboot?
How often _do_ you reboot, after all, it is linux? =)
Well, to be honest, I have a laptop that requires
On Mon, Jun 03, 2002 at 03:08:56AM -0500, Elizabeth Barham wrote:
I made my own entitled local in /etc/init.d by copying
/etc/init.d/skeleton to /etc/init.d/local, added what I needed it to
do in the start section, and created a softlink to it in rc2.d
entitled S99local.
I don't know how
David == David Wright [EMAIL PROTECTED] writes:
s/not\s+//;
David I appreciate the good-natured jibe. I didn't think the analogy
David to the Debian release process was so far-fetched, but it
David appears that it is.
I'll admit to being one (of many, probably) who read the first
sentence
On Mon, Jun 03, 2002 at 02:34:01PM +, Paulo Henrique Baptista de
Oliveira wrote:
How to reject mail with from like this: at a Debian
GNU/Linux box and Exim? With procmail?
Don't do that! It's in violation of an RFC. See
http://www.rfc-ignorant.org/policy-dsn.html for more
Thanks a lot for your help!! I could finally get past that step, but
now I came across another problem:
I have compiled the kernel with the necessary modules, installed the IP
Masq script and all that, but it still doesn't work. I've tried
pinging my linux box from Windows XP with no success.
it fails because it appears to be based on a false premise: that port
specific bugs are significantly holding up the release process.
I wish this were true, but the official information is that the problems
of supporting many obscure architectures is EXACTLY what is holding up
woody. See, for
unsubscribe
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Hi,
As a newbie, I've been struggling to get my VIA 8233 onboard sound
working on my freshly installed Debian Woody system. So far I've managed
to get my USB mouse working, compiled from source the Linux kernel to
2.4.18 etcetera All this within a weeks time. But now I'm stuck with the
hi ya noah...
http://www.rfc-ignorant.org/policy-dsn.html for more info. By rejecting
very true ... but...
sometimes ... ( lots )... more often than not...
i get tons of spams from ... which i too would like to bounce/reject
- and any email that is outgoing that bounced is usually caught
On Mon, Jun 03, 2002 at 03:44:43PM -0700, Alvin Oga wrote:
sometimes ... ( lots )... more often than not...
i get tons of spams from ... which i too would like to bounce/reject
OK, but if you reject mail from you're likely to be blacklisted. I
certainly won't accept mail from domains that
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Monday 03 June 2002 01:49 pm, Patrick Wiseman wrote:
On Mon, 3 Jun 2002, Bert van Ooijen wrote:
As a newbie, I've been struggling to get my VIA 8233 onboard sound
working on my freshly installed Debian Woody system.
According to the
Hi,
I will not reject. I will only send them to /dev/null. :))
What procmail rule is it?
TIA,Paulo Henrique
Quoting Noah Meyerhans ([EMAIL PROTECTED]):
On Mon, Jun 03, 2002 at 03:44:43PM -0700, Alvin Oga wrote:
sometimes ... ( lots )... more often
Anyone know of a task tracker package for Debian? (Obviously) So far,
I've been unsuccessfull in my search to find an application to fill this
niche. The most promising application I've found meantion of so far is a
GKrellM plugin called Gk-Taskman. However, this package was hosted on
On Mon, Jun 03, 2002 at 02:05:57PM -0700, Paul E Condon wrote:
Thanks for several helpful suggestions. I chose sysutils todos.
The man page does not indicate that this can be run as a filter, but it
seems to work.
The man page I'm reading (from sysutils 1.3.8.5.1) says:
The programs
On Mon, Jun 03, 2002 at 11:49:54PM +0200, Ronald Castillo wrote:
I was thinking that I should configure my secondary LAN card (the one
that connects to my internal network) in the /etc/network/interfaces
card, but I don't know what to place there. I have already configured
the LAN card that
On Mon, Jun 03, 2002 at 05:23:37PM -0300, O Senhor wrote:
Thanks, but i did compiled it, and works fine! Why the mplayer program
are not in Debian release??? I did compiled, and maybe, can i make the
.deb package... but if someone else already did the job, why we do not
have the .deb in
* Colin Watson ([EMAIL PROTECTED]) [020603 16:51]:
On Mon, Jun 03, 2002 at 11:49:54PM +0200, Ronald Castillo wrote:
I was thinking that I should configure my secondary LAN card (the one
that connects to my internal network) in the /etc/network/interfaces
card, but I don't know what to place
On Monday 03 June 2002 04:42 pm, Jamin W. Collins wrote:
Anyone know of a task tracker package for Debian? (Obviously) So far,
I've been unsuccessfull in my search to find an application to fill this
niche. The most promising application I've found meantion of so far is a
GKrellM plugin
Am Montag, 3. Juni 2002 17:50 schrieb Sebastian Canagaratna:
Any suggestion for safely recovering so that I can boot up into
WIndows, and also chose linux from the menu rather than always
use a floppy to boot into linux?
Hello,
I think you can use M$ fdisk /mbr to reinstall the
hi ya noah
yes... it's possible to get dumped into the bl..
( havent yet ... since i haven't implmented spamfilters
( on some servers
- and did get blacklisted by accident... when going to
open relay test sites to test one of my servers...fixed
the open
On Mon, Jun 03, 2002 at 11:21:28AM -0700, ben wrote:
On Monday 03 June 2002 05:01 am, Paul Johnson wrote:
hey ballo, for the last couple of days, your posts are showing up as msg.pgp
attachments; i.e., the attachments have to be viewed in order to see the msg.
Probably a function of the
I've found a lot of good documentation about IMAP, fetchmail and
procmail individually. However, I'm trying to figure out how to make
them all work together and I'm afraid I don't quite get it. I've tried
some Google searches and found myself overwhelmed with information that
didn't really apply
--
REPLY TO : [EMAIL PROTECTED]
--
I have an OPL3 chipset in my laptop, and spent a very frustrating week
trying to get it to work with ALSA and a 2.4.18 kernel. No combination of
configs worked, so I abandoned ALSA
On Tue, 4 Jun 2002, chiakotay wrote (in response to me):
I have an OPL3 chipset in my laptop, and spent a very frustrating week
trying to get it to work with ALSA and a 2.4.18 kernel. No combination of
configs worked, so I abandoned ALSA in favor of kernel-based sound, and it
worked.
On Mon, Jun 03, 2002 at 09:38:37PM -0400, Jason Bleazard wrote:
I've found a lot of good documentation about IMAP, fetchmail and
procmail individually. However, I'm trying to figure out how to make
them all work together and I'm afraid I don't quite get it. I've tried
some Google searches
On Sun, Jun 02, 2002 at 05:52:43PM -0400, Slootbeek, Jule S wrote:
Weel i figured it out...
Great!
i have to run
modprobe input
modprobe mousedev
modprobe usbcore
modprobe uhci
modprobe hid
All I do is put the module names into /etc/modules and they
automatically load when I boot (which
On Mon, Jun 03, 2002 at 06:25:40PM -0700, Alvin Oga wrote:
and the From is a nuisance from some spammers is a
good thing to reject ( ie ... and is spammer )
- havent figured it out yet ..
My point was that if you configure your mail server to reject mail
From
On Sat, Jun 01, 2002 at 05:08:40PM -0700, Jeff Johnson wrote:
I am getting these messages with all sorts of gnome apps. Can anyone
point me to info on locals or better yet anyone have some hints?
[EMAIL PROTECTED]:~$ gnome-terminal
Gdk-WARNING **: locale not supported by Xlib, locale
On Mon, 3 Jun 2002 17:52:17 -0700
ben [EMAIL PROTECTED] wrote:
check rpm.pbone.net for gk-taskman and other gkrellm plugins.
Perfect! Thank you. Found it embedded in a source rpm and was able to
grab it with alien. Provides everything I was looking for.
--
Jamin W. Collins
--
To
Noah Meyerhans [EMAIL PROTECTED] writes:
On Mon, Jun 03, 2002 at 06:25:40PM -0700, Alvin Oga wrote:
and the From is a nuisance from some spammers is a
good thing to reject ( ie ... and is spammer )
- havent figured it out yet ..
My point was that if you
Hey all,
I'm using qmail/rblsmtpd, qmailscanner, and spamassassin. All my incoming mail
are marked with X-Spam-Status: and I'd like to have mail with spam status of
Yes put into a separate maildir. I'm using qmail maildirs, and I'd like to
continue using maildirs. How can I filter my mail
Jaye Inabnit ke6sls wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Monday 03 June 2002 01:49 pm, Patrick Wiseman wrote:
On Mon, 3 Jun 2002, Bert van Ooijen wrote:
As a newbie, I've been struggling to get my VIA 8233 onboard sound
working on my freshly installed Debian Woody
On Mon, 3 Jun 2002 23:00:42 -0400
Paul Miller [EMAIL PROTECTED] wrote:
I'm using qmail/rblsmtpd, qmailscanner, and spamassassin. All my
incoming mail are marked with X-Spam-Status: and I'd like to have mail
with spam status of Yes put into a separate maildir. I'm using qmail
maildirs, and
Hi,
I got my sound card to work by doing
modprobe trident
modprobe sound
but I have to do this everytime at boot time.
I also did update-modules expecting that it will modify the .conf file and I
will be all set but that doesnt seem to be the case,
How should I proceed from here,
Thanks
Kapil
301 - 400 of 402 matches
Mail list logo
