El 26 de mayo de 2015, 8:41, Camaleón noela...@gmail.com escribió:
El Mon, 25 May 2015 21:52:25 -0430, Miguel Matos escribió:
(ese html...)
¿serio? creo que es porque envíe la imagen por email, e imgur me abrió una
nueva ventana de mi gmail. Quizás es por eso.
Saludos a la lista. El fin
Obrigado Ednardo, eu tinha olhado o manual e não tinha reparado nesse
final. Parece que o nó do problema está aí mesmo.
Eu tentei a opção de informar o id da janela (obtido com o comando
xdpyinfo). Mas parece que somente a id da janela do root é válida, pois
é a única aceita pelo root-tail. E
Det skall bara vara namnet och loggan som skiljer.
Debian fick inte använda Mozilla och Thunderbird om de inte uppdaterade som
Mozilla ville. Eftersom det är OSS, så forkade Debian dem, och bytte ut fet
som inte var öppet, dvs loggan och namnet.
Så det skall vara precis samma. Annars är det en
On 20150526_1829+0300, Juha Heinanen wrote:
I'm back at trying to install Jessie on Acer C720 without going the long
route via Wheezy.
Just to recall, the problem is that current Jessie installer
debian-8.0.0-i386-netinst.iso from April 24, does not boot on Acer
D. R. Evans doc.ev...@gmail.com writes:
D. R. Evans wrote on 05/26/2015 04:52 PM:
If I understand you correctly, I think that you are saying that:
n7dr@shack:~$ AUTHORITY=/home/n7dr/.Xauthority HOME=/root sudo -E xterm
I probably misunderstood you.
Anyway, after some more
On 26/05/15 at 19:07 +0200, David Pinson wrote:
Le 25/05/2015 21:37, maderios a écrit :
On 05/25/2015 08:32 PM, Erwan David wrote:
Le 25/05/2015 20:27, maderios a écrit :
On 05/25/2015 06:21 PM, David Pinson wrote:
Difficile de voir clair avec systemd...
Pour ceux qui veulent se
apparmor.
In the recent Debians (Wheezy++, I think), there is a directory
/etc/apparmor.d. In there is a file called user.sbin.named. That file does
various things to the /var/cache/bind directory. I didn't look at it long
enough to figure out just what it does, and I couldn't find apparmor on
Buenas necesito ayuda, e buscado en grupos y no comprendo como activar y
visualizar wifi en lxde incluso en la wiki de Debian-wifi no se cómo
realizar la operación. Si me pueden enviar las instrucciones me comprometo
incluso a hacer un blog explicándolo para que otras personas no tengan el
mismo
On Mon, 25 May 2015 19:07:07 -0700
Gary Roach gary719_li...@verizon.net wrote:
I upgraded to Jessie recently and lost my BackupPC setup and my
rsyncd setup. I found that both succumbed to the change over from
inet.d to Systemd. None of the documentation mentions anything about
systemd setup.
On Mon, 25 May 2015 18:53:42 -0700
Gary Roach gary719_li...@verizon.net wrote:
On 05/24/2015 12:49 AM, Petter Adsen wrote:
On Sun, 24 May 2015 00:27:02 -0700
Gary Roach gary719_li...@verizon.net wrote:
On 05/22/2015 01:19 PM, Bob Proulx wrote:
Darac Marjal wrote:
Gary Roach wrote:
On Tue, May 26, 2015 at 2:09 PM, Petter Adsen pet...@synth.no wrote:
On Tue, 26 May 2015 13:16:04 +0800
Clark Wang dearv...@gmail.com wrote:
On Tue, May 26, 2015 at 1:10 PM, Herminio Hernandez Jr
herminio.hernande...@gmail.com wrote:
On Tue, 2015-05-26 at 10:22 +0800, Clark Wang
On Tue, 26 May 2015 13:16:04 +0800
Clark Wang dearv...@gmail.com wrote:
On Tue, May 26, 2015 at 1:10 PM, Herminio Hernandez Jr
herminio.hernande...@gmail.com wrote:
On Tue, 2015-05-26 at 10:22 +0800, Clark Wang wrote:
I have an `iBook G4` and have `Debian 8 (Jessie)` installed on it.
As I know, yaboot can't set vmlinux and initrd at the same time in its
prompt, the right way is to load an alternative config file, such as
conf file=/boot/deb/yaboot.conf, but in this yaboot.conf, both
vmlinux and initrd.gz are under /, the path is incorrect.
so I guess you can write a new
Bonjour,
J'aimerais savoir si c'était normal que Jessie (8.0) consomme plus de
swap que Wheezy pour les mêmes services.
Les machines incriminées sont des machines virtuelles hébergées sur un
serveur Xen 4.4.1.
--
Guillaume
--
Lisez la FAQ de la liste avant de poser une question :
On Tue, May 26, 2015 at 3:11 PM, Petter Adsen pet...@synth.no wrote:
Can the machine boot from a USB flash drive? Or over the network?
One of these approaches might be easier for you.
I'm trying to find out how to boot form USB. Boot from network also
sounds good. I'll
On Tuesday 26 May 2015 05:15:10 Bret Busby wrote:
On 26/05/2015, Lisi Reisz lisi.re...@gmail.com wrote:
On Monday 25 May 2015 20:56:58 Bret Busby wrote:
On 26/05/2015, Sven Arvidsson s...@whiz.se wrote:
On Tue, 2015-05-26 at 00:59 +0800, Bret Busby wrote:
But, in going to the company
On 26/05/2015, Lisi Reisz lisi.re...@gmail.com wrote:
On Tuesday 26 May 2015 05:15:10 Bret Busby wrote:
On 26/05/2015, Lisi Reisz lisi.re...@gmail.com wrote:
On Monday 25 May 2015 20:56:58 Bret Busby wrote:
On 26/05/2015, Sven Arvidsson s...@whiz.se wrote:
On Tue, 2015-05-26 at 00:59
Le septidi 7 prairial, an CCXXIII, Pierre Frenkiel a écrit :
At last, I could solve the problemm. In case anybody is interested,
here is how:
in /etc/modprobe.d/alsa-base.conf:
options snd-usb-audio index=1
After that, and reboot, the Z515 is seen in /proc/asound/cards, and in 'aplay
Bonjour,
Le samedi 23 mai 2015 à 15:26, Qassem Debian a écrit :
Je veux installer Debian,sur un Dell E5450,avec un noyau FreeBSD mais
seulement j'hésite un peu...je ne sais pas si l'administration d'une Debian
GNU/kFreeBSD est identique à celle d'une Debian avec noyau Linux.Quel est le
Hola,
Bones,
En breus he de muntar un servidor de correu i l'haurà d'administrar
una persona que no té massa coneixements d'administració de sistemes.
Instal·lar un Zimbra és molt? Tota l'administració es web i amb una
instal·lació tens tot, fins el webmail.
Salut,
--
Oscar
* From: Juha Heinanen xr-xr-x 1 root staff 1052876 May 25 22:47
/usr/local/lib/libre.so
peter@armada:~$
Where do you keep librem.so and etc.?
Thanks again, ... Peter E.
--
123456789 123456789 123456789 123456789 123456789 123456789 123456789 12
Tel +13606390202
On Tue, 26 May 2015 14:17:13 +0800
clarkw clark.w...@oracle.com wrote:
On Tue, May 26, 2015 at 2:09 PM, Petter Adsen pet...@synth.no wrote:
On Tue, 26 May 2015 13:16:04 +0800
Clark Wang dearv...@gmail.com wrote:
On Tue, May 26, 2015 at 1:10 PM, Herminio Hernandez Jr
El día 25 de mayo de 2015, 18:58, Maykel Franco
maykeldeb...@gmail.com escribió:
El 25/05/2015 18:51, Camaleón noela...@gmail.com escribió:
El Mon, 25 May 2015 18:28:32 +0200, Maykel Franco escribió:
El día 25 de mayo de 2015, 18:13, Camaleón noela...@gmail.com
escribió:
El Mon, 25 May
On Tue, 26 May 2015 16:58:05 +0800
Bret Busby bret.bu...@gmail.com wrote:
On 26/05/2015, Petter Adsen pet...@synth.no wrote:
On Tue, 26 May 2015 12:23:25 +0800
Bret Busby bret.bu...@gmail.com wrote:
On 26/05/2015, Stuart Longland stua...@longlandclan.yi.org wrote:
-BEGIN PGP
Eu coloquei o jessie em dual boot com o wheezy, para evitar surpresaz desse
tipo.
Em 25/05/2015 11:03, riesdra ries...@zoho.com escreveu:
vou instalar o jessie;
mas vou aguardar mais um pouco, por causa de itr e irpf, vou gerar as
impressões das declarações primeiros, vai que depois da alguma
On Tue, May 26, 2015 at 3:05 PM, yu kkn...@gmail.com wrote:
As I know, yaboot can't set vmlinux and initrd at the same time in its
prompt, the right way is to load an alternative config file, such as
conf file=/boot/deb/yaboot.conf, but in this yaboot.conf, both
vmlinux and initrd.gz are
Le mardi 26 mai 2015, 09:33:20 Guillaume a écrit :
Bonjour,
’jour,
J'aimerais savoir si c'était normal que Jessie (8.0) consomme
plus de swap que Wheezy pour les mêmes services.
Déjà, on va dire que « Jessie consomme plus de swap » est un
raccourci pour « avec le noyau et les applications
I'm still messing with trying to get a good backup routine, and I'm
(slowly) coming to the conclusion that other people are better at it
than I am, and I need a way to store data remotely anyway.
Right now, I'm testing AltDrive on an Ubuntu machine. They have a Java
client (which I'm not too
On 26/05/2015, Petter Adsen pet...@synth.no wrote:
On Tue, 26 May 2015 12:23:25 +0800
Bret Busby bret.bu...@gmail.com wrote:
On 26/05/2015, Stuart Longland stua...@longlandclan.yi.org wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512
On 24/05/15 19:03, Petter Adsen wrote:
If
At last, I could solve the problemm. In case anybody is interested,
here is how:
in /etc/modprobe.d/alsa-base.conf:
options snd-usb-audio index=1
After that, and reboot, the Z515 is seen in /proc/asound/cards, and in 'aplay
-L'
and the sound works with vlc or audacity, but not with aplay,
Bonjour a tous
j'ai installe Jessie depuis 15 jours et je constate que toutes les
applis rament
Est ce que quelqu'un a constate la même chose?
Comment faire pour améliorer ca?
modifier le cache? le noyau? etc
Merci
--
Lisez la FAQ de la liste avant de poser une question :
Le mardi 26 mai 2015 à 11:29, Thierry Granier a écrit :
j'ai installe Jessie depuis 15 jours et je constate que toutes les applis
rament
Est ce que quelqu'un a constate la même chose?
Pas de problème sur mes différents systèmes (des serveurs, des postes de
travail).
Comment faire pour
El martes, 26 may 2015, a las 12:33 UTC+2 horas,
Sebastian Oldani escribió:
Les hago una consulta, quiero configurar mi debian en una especie de
read only.
Quiero saber si alguien hizo esto, si lo probó o alguna sugerencia.
La idea básicamente es que es sistema quede frezado, quiero poder
cron reads the files in /etc/cron.d in addition to /etc/crontab and the
per-user crontab files. See the cron(8) manpage.
The files in /etc/cron.d are supposed to be crontab files, not scripts
like those being run using run-parts.
--
regards,
kushal
understood :-)
Cheers!
Pol
--
To
Hi all,
I am compiling
https://www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.20.tar.bz2
I have gcc 4.9.2 installed on my Debbian 8.0. I have compiled
linux-kernel-2.6.32 on this box. Somebody may point out that this is old
version and i do not waste time in compile but this is requirement and i
Le septidi 7 prairial, an CCXXIII, Pierre Frenkiel a écrit :
Did you really read my post?
the so-called non-existent sound card worked with vlc and audacity !!
Yes, I did read your post. I also know how ALSA works and that VLC and
audacity are probably opening a different device than aplay
Bonjour,
Le 26 mai 2015, Thierry Granier a écrit :
Bonjour a tous
j'ai installe Jessie depuis 15 jours et je constate que toutes les
applis rament
Est ce que quelqu'un a constate la même chose?
Comment faire pour améliorer ca?
modifier le cache? le noyau? etc
J'ai le même problème
On Tue, 26 May 2015, Nicolas George wrote:
in /etc/modprobe.d/alsa-base.conf:
options snd-usb-audio index=1
After that, and reboot, the Z515 is seen in /proc/asound/cards, and in 'aplay
-L'
This should not have changed the presence of cards in /proc/asound/cards,
only their order.
Les hago una consulta, quiero configurar mi debian en una especie de
read only.
Quiero saber si alguien hizo esto, si lo probó o alguna sugerencia.
La idea básicamente es que es sistema quede frezado, quiero poder
reiniciar la PC en cualquier momento y que el sistema no muera, pero
también
Hi all :-)
doing a check of my system, I see some scripts in /etc/cron.d/
if my /etc/crontab contains:
SHELL=/bin/sh
PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
# m h dom mon dow user command
17 ** * * rootcd / run-parts --report /etc/cron.hourly
25 6* *
Pol Hallen de...@fuckaround.org writes:
Hi all :-)
doing a check of my system, I see some scripts in /etc/cron.d/
if my /etc/crontab contains:
SHELL=/bin/sh
PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
# m h dom mon dow user command
17 ** * * rootcd /
Re,
En effet désolé je me suis mal exprimé :)
Je vais restart une des machines virtuelle sur le noyau de Wheezy.
Au niveau process en effet il y en a quelques-uns en plus sous Jessie,
mais ceux-ci ne consomme pas grand chose.
Merci pour les pistes en tous cas.
Le 26/05/2015 10:08, Sylvain
On Sun, 24 May 2015 16:01:41 +0300
Reco recovery...@gmail.com wrote:
Hi.
On Sun, 24 May 2015 13:47:48 +0200
Petter Adsen pet...@synth.no wrote:
On Sun, 24 May 2015 13:26:52 +0200
Petter Adsen pet...@synth.no wrote:
Thanks to you, I now get ~880Mbps, which is a lot better. It seems
Hello!
I have problem on my notebook whith optimus tech. Maybe, this information
actually for you.
Sorry for my bad english.
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 340.76 Thu Jan 22 12:11:08
PST 2015
[ 6266.300289] vgaarb: this pci device is not a vga device
[ 6266.302749] ACPI
On Sun, 24 May 2015 15:53:17 +0300
Reco recovery...@gmail.com wrote:
Hi.
On Sun, 24 May 2015 13:26:52 +0200
Petter Adsen pet...@synth.no wrote:
On Sun, 24 May 2015 11:28:36 +0200
Petter Adsen pet...@synth.no wrote:
On Sun, 24 May 2015 10:36:39 +0200
Petter Adsen
On 2015-05-25 20:14:50 -0500, David Wright wrote:
Well, the discussion in these threads has ranged widely over trying to
speed up the reading of directories and large numbers of files. Every
so often, I think about what you're doing with that huge directory of
emails, all 145k of them.
Well,
Le septidi 7 prairial, an CCXXIII, Pierre Frenkiel a écrit :
I already said that it's not a fix but a workaround.
It's your perfect right not to spend time to help people (or
may-be you are unable to help), but in that case please don't pollute
the list with useless comments.
My
Hello everyone,
I installed Debian 8 Cinnamon on my new Dell XPS 13 2015 and to get the
new Intel driver I upgraded to Sid. But now cinnamon-control-center had
a problem with the network-manager being = 1.0.0. My solution:
Upgrading to Cinnamon 2.4 from the experimental branch.
But now
On Tuesday 26 May 2015 13:21:39 Nicolas George wrote:
Le septidi 7 prairial, an CCXXIII, Pierre Frenkiel a écrit :
I already said that it's not a fix but a workaround.
It's your perfect right not to spend time to help people (or
may-be you are unable to help), but in that case please
pe...@easthope.ca writes:
peter@armada:~$ baresip
baresip: error while loading shared libraries: libre.so: cannot open shared
object file: No such file or directory
peter@armada:~$ ls -ld /usr/local/lib/lib*so
-rwxr-xr-x 1 root staff 138008 May 25 07:51 /usr/local/lib/librem.so
-rwxr-xr-x
Salut,
apt-get install intel-microcode a résolu ce problème sur un notebook pour ma
part
Cordialement,
Christophe De Natale
Le 26 mai 2015 à 11:50, Sébastien NOBILI sebnewslet...@free.fr a écrit :
Le mardi 26 mai 2015 à 11:29, Thierry Granier a écrit :
j'ai installe Jessie depuis 15
Ainda fico curioso, usando somente o rsync, como fazem para manter o
histórico de backups diários, como incrementais, ou mesmo completos? Pois,
para não precisar utilizar algo como o tar (e certamente, no mínimo, um
gz), tenho utilizado snapshots com ZFS, pois foi a alternativa mais cômoda
de
At irregular times, and apparently for no reason at all, networking
drops and cannot be restarted without reboot on a fresh install of
Jessie. The NIC is a Broadcom NetXtreme BCM5720.
ifconfig thinks networking is still up because I can:
ifconfig eth0 down
I find this when I try
Bonjour,
... Depuis le temps que je voulais poster ces questions ...
Je viens vers la liste avec une question, bien oui, ou même plusieurs.
La chose est horrible, pour ma part d' encaisser des inepties en face de
moi.
J'ai lu beaucoup sur le sujet, mais je voudrais des avis de vrais gens :)
La
On Tue, 26 May 2015, Nicolas George wrote:
Yes, I did read your post. I also know how ALSA works and that VLC and
audacity are probably opening a different device than aplay and mplayer. The
real test is aplay, since it is the program that does the least black magic
behind the user's back.
On Tue, 2015-05-26 at 14:25 +0200, Philipp Trulson wrote:
Hello everyone,
I installed Debian 8 Cinnamon on my new Dell XPS 13 2015 and to get the
new Intel driver I upgraded to Sid. But now cinnamon-control-center had
a problem with the network-manager being = 1.0.0. My solution:
El Mon, 25 May 2015 21:52:25 -0430, Miguel Matos escribió:
(ese html...)
Saludos a la lista. El fin de semana pasado me instalé lxde para ver su
estilacho, y ver qué se puede modificar. Y entre otras cosas, usé el
conky-manager para agregar más efectos. Decido volver al gnome, porque
Le septidi 7 prairial, an CCXXIII, Lisi Reisz a écrit :
You really do want the last word, don't you?
Not really,
Anyone with Pierre's problem can use his solution to make his speaker work.
Or they can use the solution to make their problem worse. This is the most
likely outcome with such
El Tue, 26 May 2015 07:33:16 -0300, Sebastian Oldani escribió:
Les hago una consulta, quiero configurar mi debian en una especie de
read only.
Quiero saber si alguien hizo esto, si lo probó o alguna sugerencia.
La idea básicamente es que es sistema quede frezado, quiero poder
reiniciar
El Tue, 26 May 2015 09:29:39 +0200, Maykel Franco escribió:
El día 25 de mayo de 2015, 18:58, Maykel Franco maykeldeb...@gmail.com
escribió:
El 25/05/2015 18:51, Camaleón noela...@gmail.com escribió:
(...)
En el caso del ejemplo del enlace sí porque el cliente se conecta al
servidor web a
Here is how you boot with usb.
https://wiki.ubuntu.com/PowerPCFAQ#How_do_I_boot_from_a_USB_drive.3F
Sent from my iPhone
On May 26, 2015, at 2:37 AM, Clark Wang dearv...@gmail.com wrote:
On Tue, May 26, 2015 at 3:05 PM, yu kkn...@gmail.com wrote:
As I know, yaboot can't set vmlinux and
On Tue, 26 May 2015, Lisi Reisz wrote:
And remember, you have twice said that you are not going to say anything more
or spend any more time. You'll do us all a favour if you stick to that,
unless you have something helpful to say that will solve the problem in a
better fashion than Pierre has.
Hello!
Sorry if this is not the correct list
I have debian 8 with cinnamon. I would like to change opacity of the
windows with combination of keys, like superkey+wheel of mouse. I
could do this with kde or compiz.
It Is possible to do with cinnamon?
Thanks!
--
To UNSUBSCRIBE, email to
El Mon, 25 May 2015 12:02:01 -0400, Alfredo escribió:
Estoy montando LTSP en debian 8 y me esta dando un error que no había
visto antes
mount call failed -server replied: Permission denied chroot: can't
execute 'test': No souch file or directory
¿Seguro que no lo habías visto antes? Yo
debes responder a la lista no al personal!
bueno en mi caso desde el problema de seguridad que ocurrió con la cuestión
esta del NSA a los meses mi dispositivo(ioemga ahora lenovo) me obligo a
tener capa de seguridad y se me hace mas fácil por cifs, yo no e tenido
problemas para leer mis
On 26 May 2015 18:24 +0200, from andr...@arrakis.se (Andreas Olsson):
2) ssh socks proxy
ssh -f -D 8080 -N DatorB
curl --proxy socks5h://localhost:8080 http://DatorC/
Fördelen med den senare är att de flesta webbläsare kan övertalas att
prata SOCKS 5 utan alltför stora krumbukter. I
El día 26 de mayo de 2015, 11:04, Carlos Nicolas
carlos.nico...@gmail.com escribió:
El 26 de mayo de 2015, 15:49, fernando sainz fernandojose.sa...@gmail.com
escribió:
El día 26 de mayo de 2015, 12:33, Sebastian Oldani
sebastianold...@gmail.com escribió:
Les hago una consulta, quiero
On 26/05/15 11:29 AM, Juha Heinanen wrote:
I'm back at trying to install Jessie on Acer C720 without going the long
route via Wheezy.
Just to recall, the problem is that current Jessie installer
debian-8.0.0-i386-netinst.iso from April 24, does not boot on Acer
C720. Testing installer boots,
tis 2015-05-26 klockan 18:08 +0200 skrev j...@lillahusetiskogen.se:
Alltså http från dator A till dator C via dator B och ssh mellan A och
B.
1) Vanlig ssh-tunnel
ssh -f -L 8080:DatorC:80 -N DatorB
curl --header Host: DatorC http://localhost:8080/
2) ssh socks proxy
ssh -f -D 8080 -N
On 05/26/2015 05:18 AM, Petter Adsen wrote:
Second, virtual machines these days are incredibly easy to set up and
use. Steve Litt posted a link to an introductory article on qemu/KVM
here very recently, I suggest that as a starting point. There is a tool
called Virtual Machine Manager (package:
On Tue, 2015-05-26 at 19:32 +0300, Juha Heinanen wrote:
No I haven't but I don't think there is anything wrong with the image.
When I start the installer, I get a black screen and the host reboots.
It is known issue with official Jessie installer. Beta installer from
January worked fine, also
Hola muy buenas, estoy tratando de sacar importar una estrucutra de
una base de datos. Primero hago un dump con la opción --no-data, y
luego al tratrar de importarlo en otra bbddy me da el siguiente error:
2015-05-26 17:33:58 10765 [ERROR] Slave SQL: Error 'Table
'db_Aecoc.dv_listBrandsBase'
El día 26 de mayo de 2015, 17:42, Camaleón noela...@gmail.com escribió:
El Tue, 26 May 2015 16:15:13 +0200, Maykel Franco escribió:
El día 26 de mayo de 2015, 15:25, Camaleón noela...@gmail.com
escribió:
(...)
He probado con esas opciones y sigue sin funcionar. Se queda el telnet
en el
Si estas importando deberías asegurarte de que la tabla está antes que la
creación de la vista que le hace referencia.
El mar., 26 de may. de 2015 a la(s) 10:38 a. m., Maykel Franco
maykeldeb...@gmail.com escribió:
Hola muy buenas, estoy tratando de sacar importar una estrucutra de
una base
Gary Dale writes:
It's unlikely to be an installer problem. Have you checked the integrity
of the netinst ISO using the md5 or sha256 checks.
No I haven't but I don't think there is anything wrong with the image.
When I start the installer, I get a black screen and the host reboots.
It is
El Tue, 26 May 2015 12:43:59 -0300, sebastian Oldani escribió:
Aca explican uno de los metodos que probé
http://blog.gegg.us/2014/03/a-raspbian-read-only-root-fs-howto/
Seria algo como un live CD, pero queria escuchar sus opiniones.
Yo se que debian apaga en segundos, ese no es el
On Tuesday 26 May 2015 21:49:34 honeyshell wrote:
Bonjour André,
Dans settings session startup puis onglet Application autostart
tu peux voir facilement les applications lancées au démarrage.
Trouveras tu ton bonheur?
Dans l'onglet General, il y a automatically save session on logout,
tu
Muchísimas gracias Camaleón, Sergio y Fernando. Me doy cuenta de que no fui
lo suficientemente claro para especificar el contexto de mi situación
completamente, y ustedes han brindado valioso aporte aún con la escasa
información. Procedo a clarificar un poco más.
Tengo una Notebook Aspire
El 26/05/15 a las 16:58, Federico Ramos escibió:
Muchísimas gracias Camaleón, Sergio y Fernando. Me doy cuenta de que no
fui lo suficientemente claro para especificar el contexto de mi
situación completamente, y ustedes han brindado valioso aporte aún con
la escasa información. Procedo a
On Tuesday 26 May 2015 19:07:14 David Pinson wrote:
En reinstallant syvinit puis procédant à la désinstallation de systemd,
le problème a disparu...
Linuxement vôtre,
...mais pas systemdement vôtre !
Ainsi Apache2 ne supporterait pas systemd ?
André
--
Lisez la FAQ de la liste avant de
Hi all!
I'm thinking about using Dirvish for backup of information from other
servers but I think in some cases they are VPS where I don't have root
access but a different user.
From what I've seen, Dirvish always connects to ssh using the root user.
Anyone know if there is any way to set a
On Tuesday 26 May 2015 20:43:57 D. R. Evans wrote:
What is wrong and how do I fix it so that I can run graphical programs
across the network using sudo?
I'm sure it's just a simple configuration issue, but my google-fu seems to
be lacking today.
By default one cannot log into a graphical
On 26/05/15 17:14, Daniel Bareiro wrote:
Hi all!
I'm thinking about using Dirvish for backup of information from other
servers but I think in some cases they are VPS where I don't have root
access but a different user.
From what I've seen, Dirvish always connects to ssh using the root
Voila ce que j'ai en plus des autres messages
voila aussi ce que j'ai
total used free sharedbuffers cached
Mem: 3,4G *3,2G * 217M 64M46M 793M
-/+ buffers/cache: 2,3G 1,0G
Swap: 6,5G44M 6,4G
et dans
On Sun, May 24, 2015 at 08:20:09AM +0200, Petter Adsen wrote:
$ update-grub2
Generating grub.cfg ...
Found background
image: /usr/share/images/desktop-base/desktop-grub.png Found linux
image: /boot/vmlinuz-3.2.0-4-amd64 Found initrd
image: /boot/initrd.img-3.2.0-4-amd64 Found linux
El día 26 de mayo de 2015, 15:25, Camaleón noela...@gmail.com escribió:
El Tue, 26 May 2015 09:29:39 +0200, Maykel Franco escribió:
El día 25 de mayo de 2015, 18:58, Maykel Franco maykeldeb...@gmail.com
escribió:
El 25/05/2015 18:51, Camaleón noela...@gmail.com escribió:
(...)
En el caso
Quand je passe la commande top j'obtiens ceci:
Tasks: 214 total, 3 running, 211 sleeping, 0 stopped, 0 zombie
%Cpu(s): 38,9 us, 3,3 sy, 0,0 ni, 57,8 id, 0,0 wa, 0,0 hi, 0,0 si,
0,0 st
KiB Mem: 3542844 total, 3191764 used, 351080 free,40864 buffers
KiB Swap: 6799356
apparemment, j'ai écrit trop vite.
ça re-bloque.
le swap est pourtant suffisant maintenant.
# free -m
total used free sharedbuffers cached
Mem: 490203287 0 26104
-/+ buffers/cache: 71419
On Tue, 2015-05-26 at 20:45 +0300, Juha Heinanen wrote:
Sven Arvidsson writes:
There was a link to a possible fix in the Fedora bugtracker:
http://www.syslinux.org/archives/2015-February/023209.html
Most likely that is it. Is there somewhere an experimentan Debian
Jessie installer that
Bonjour André,
Dans settings session startup puis onglet Application autostart
tu peux voir facilement les applications lancées au démarrage.
Trouveras tu ton bonheur?
Dans l'onglet General, il y a automatically save session on logout,
tu peux décocher.
--
Lisez la FAQ de la liste avant de
Hi.
On Tue, May 26, 2015 at 01:43:57PM -0600, D. R. Evans wrote:
I have just installed stable (jessie) on a machine that used to run Kubuntu.
This machine is mostly accessed remotely, using ssh.
If I log in as a normal user over ssh, I can run X programs fine. (For
example, typing xterm
Bonjour à tous,
après avoir installé une debian 8 sur une machine virtuelle, je constate
que le pavé numérique de mon pc ne fonctionne plus.
(même en ayant appuyé sur la touche pavé numérique)
Auriez-vous une idée?
Merci d'avance pour votre aide.
--
Lisez la FAQ de la liste avant de poser une
Hola,
@Javier: si tenes algo a mano como para darle una mirada te agradecería.
gracias a todos por las respuestas y disculpen los que se sintieron
afectados por mis comentarios, pero no me gusta lo de contestar con
búsquedas en google. Me una total y absurda forma de decir las cosas.
saludos.
I have just installed stable (jessie) on a machine that used to run Kubuntu.
This machine is mostly accessed remotely, using ssh.
If I log in as a normal user over ssh, I can run X programs fine. (For
example, typing xterm brings up the expected terminal.)
However, if I execute sudo xterm, then
Le 26 mai 2015 à 22:42, Thierry Granier th.gran...@free.fr a écrit :
Quand je passe la commande top j'obtiens ceci:
Tasks: 214 total, 3 running, 211 sleeping, 0 stopped, 0 zombie
%Cpu(s): 38,9 us, 3,3 sy, 0,0 ni, 57,8 id, 0,0 wa, 0,0 hi, 0,0 si, 0,0
st
KiB Mem: 3542844
Reco wrote on 05/26/2015 01:53 PM:
Yet there's a way to solve your problem - get a habit of running
X clients like this:
HOME=/root sudo -E xterm
Re-defining $HOME is crucial as otherwise you risk users' rewriting
configuration files by root.
Are you saying that if I type:
Le mardi 26 mai 2015 à 22:42 +0200, Thierry Granier a écrit :
Quand je passe la commande top j'obtiens ceci:
Tasks: 214 total, 3 running, 211 sleeping, 0 stopped, 0 zombie
%Cpu(s): 38,9 us, 3,3 sy, 0,0 ni, 57,8 id, 0,0 wa, 0,0 hi, 0,0
si, 0,0 st
KiB Mem: 3542844 total,
Le 26 mai 2015 à 23:04, Thierry Granier th.gran...@free.fr a écrit :
j'ai passe la commande lshw et j'obtiens un truc bizarre mais peut-etre
normal:
*-cpu
produit: Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz
fabriquant: Intel Corp.
identifiant
j'ai passe la commande lshw et j'obtiens un truc bizarre mais peut-etre
normal:
*-cpu
*produit: Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz*
fabriquant: Intel Corp.
identifiant matériel: 1
information bus: cpu@0
taille: 2670MHz
capacité:
On Tuesday 26 May 2015 21:58:47 D. R. Evans wrote:
Reco wrote on 05/26/2015 01:53 PM:
Yet there's a way to solve your problem - get a habit of running
X clients like this:
HOME=/root sudo -E xterm
Re-defining $HOME is crucial as otherwise you risk users' rewriting
configuration
1 - 100 of 146 matches
Mail list logo
