Le jeudi 1 février 2018, 20:18:32 CET Klaus Becker a écrit :
> Salut,
>
> sous Stretch et XFCE4, j'ai désinstallé firefox et j'ai installé la dernière
> version - 58.0.1 - dans /opt/firefox.
>
> Lorsque dans kmail je clique sur un lien html, je reçois le message :
>
> "Il est impossible pour
Hello,
On Thu, Feb 01, 2018 at 11:53:36AM +, Michael Fothergill wrote:
> Thus for anyone in the entire world who is new to linux,the most
> efficient route at present could well be to install Fedora and be
> stable and spectre protected out of the box rather than taking on
> the indefatigable
Hola
El 1/2/2018 a las 8:11 p.m., Sergio escribió:
Si el problema fuesen las configuraciones me parecería excesivo crear
uno nuevo pudiendo borrarlas.
cp -rfv $USERHOME/.config{,.bak}
rm -rf $USERHOME/.config
Y si el problema persiste con el usuario nuevo ¿de que habría servido
borrar
OP wrote directly to me, sending back to list in case it helps others.
2018-02-01 3:38 GMT+01:00 tv.debian wrote:
On 01/02/2018 01:38, Attilio Giuseppe Carolillo wrote:
I use Debian "Buster" on a laptop Lenovo G580 (Geforce 635M).
I updated the primus package 2015XXYY-6 but i didn't solved
Bueno, usar mv sería más rapido ahora que lo pienso.
Si el problema fuesen las configuraciones me parecería excesivo crear uno
nuevo pudiendo borrarlas.
cp -rfv $USERHOME/.config{,.bak}
rm -rf $USERHOME/.config
El 2/2/2018 1:04 AM, "divagante" escribió:
> El 01/02/18 a las 20:32, Marcelo Giordano escribió:
>
>> Hola
El 01/02/18 a las 20:32, Marcelo Giordano escribió:
Hola amigos. Les cuento mi problema: tengo debian 9 xfce y se me ocurrió
probar de instalar kde por lo que hice apt install kde-full.
Una vez instalado reinicié todo el sistema y me fue imposible volver a
ingresar al sistema con mi usuario en
Hola Marcelo.
El 1/2/2018 a las 7:32 p.m., Marcelo Giordano escribió:
Hola amigos. Les cuento mi problema: tengo debian 9 xfce y se me
ocurrió probar de instalar kde por lo que hice apt install kde-full.
Una vez instalado reinicié todo el sistema y me fue imposible volver a
ingresar al
Hola amigos. Les cuento mi problema: tengo debian 9 xfce y se me ocurrió
probar de instalar kde por lo que hice apt install kde-full.
Una vez instalado reinicié todo el sistema y me fue imposible volver a
ingresar al sistema con mi usuario en kde y en xfce, o sea, no puedo
acceder a ninguno de los
On 02/01/2018 03:57 PM, Sven Hartge wrote:
Sven Joachim wrote:
On 2018-02-01 19:55 +0100, Sven Hartge wrote:
Frank M wrote:
Feb 01 13:39:07 franklin minissdpd[9152]: Error: please specify LAN
network interface by name instead of IPv4 address :
Curt wrote:
> Still, I'm uncertain what goes into /etc/fstab.
>/dev/mapper/swap none swap sw 0 0
> ?
Yes, this is correct. With crypted-swap you need to use the device
mapper device, because the UUID changes on every boot, as you
discovered. (Which is the point of having a
Sven Joachim wrote:
> On 2018-02-01 19:55 +0100, Sven Hartge wrote:
>> Frank M wrote:
>>> Feb 01 13:39:07 franklin minissdpd[9152]: Error: please specify LAN
>>> network interface by name instead of IPv4 address : 0.0.0.0
>>> Feb 01 13:39:07 franklin
Muchas gracias a todos.
La opción que me ha funcionado sin problemas ha sido la de sergio:
>
> <>
>
> Por ejemplo
>
> lo único que en el tar tenía la estructura de directorios, luego he movido
la carpeta que quería he borrado el resto y ya.
La opción más sencilla: mount -t nfs server:/path/
On 2018-02-01, Nicolas George wrote:
>
>> Unfortunately my crypttab (which I've never touched or looked at)
>> reveals the following:
>> #
>> cryptswap1 /dev/sda5 /dev/urandom swap,cipher=3Daes-cbc-essiv:sha256
>> Which is dangerous because that dev/sda5 gets
Salut,
sous Stretch et XFCE4, j'ai désinstallé firefox et j'ai installé la dernière
version - 58.0.1 - dans /opt/firefox.
Lorsque dans kmail je clique sur un lien html, je reçois le message :
"Il est impossible pour KDEInit de lancer « firefox »:
Il est impossible d'ouvrir la bibliothèque «
On Thu, Feb 01, 2018 at 07:55:53PM +0100, Sven Hartge wrote:
Your configuration is broken/wrong. You need to edit
/etc/default/minissdpd and put the correct IP or device name into the
variable "MiniSSDPd_INTERFACE_ADDRESS".
Umm, no. It is expected that a debian package will not self destruct
On 2018-02-01 19:55 +0100, Sven Hartge wrote:
> Frank M wrote:
>
>> Feb 01 13:39:07 franklin minissdpd[9152]: Error: please specify LAN
>> network interface by name instead of IPv4 address : 0.0.0.0
>> Feb 01 13:39:07 franklin minissdpd[9152]: can't parse "0.0.0.0" as a
Curt (2018-02-01):
> Unfortunately my crypttab (which I've never touched or looked at)
> reveals the following:
>
> #
> cryptswap1 /dev/sda5 /dev/urandom swap,cipher=aes-cbc-essiv:sha256
>
> Which is dangerous because that dev/sda5 gets wiped out at every
> (re)boot.
The danger
Frank M wrote:
> Feb 01 13:39:07 franklin minissdpd[9152]: Error: please specify LAN
> network interface by name instead of IPv4 address : 0.0.0.0
> Feb 01 13:39:07 franklin minissdpd[9152]: can't parse "0.0.0.0" as a
> valid address or interface name
Your
David Wright (2018-02-01):
> Vaguely
Thanks.
> Later the page goes on to describe suspend/resume but not with
> a random key. Some people might see that as a challenge, others
> as an opportunity. I make no judgment of such people.
The whole point of using an ephemeral key is to make the
Updating my Sid installation this morning.
Setting up minissdpd (1.5.20161216-1) ...
Installing new version of config file /etc/init.d/minissdpd ...
Job for minissdpd.service failed because the control process exited with
error code.
See "systemctl status minissdpd.service" and "journalctl
On Thu, Feb 01, 2018 at 07:24:56PM +0100, Anil Duggirala wrote:
> > ~$ apt-file search firmware-5.bin
> > firmware-atheros: /lib/firmware/ath10k/QCA4019/hw1.0/firmware-5.bin
>
> For some reason I am not able to run that command, even as root.
apt-file is not installed by default. It's a
> ~$ apt-file search firmware-5.bin
> firmware-atheros: /lib/firmware/ath10k/QCA4019/hw1.0/firmware-5.bin
For some reason I am not able to run that command, even as root. And
that file is different to the one I am missing
(th10k/QCA6174/hw3.0/firmware-5.bin) right?
>
> Then query the APT
> On an unmodified stretch (yours is unmodified, isn't it)
>
> /sbin/modinfo ath10k_pci
>
> does not list any of these files in the firmware lines. So why should
> the kernel want any of them?
>
I believe I have done a standard stretch install, yet /sbin/modinfo
ath10k_pci :
filename:
[Some rampant snipping, I'm afraid. Hope that is ok.]
On Thu 01 Feb 2018 at 09:41:36 -0600, David Wright wrote:
> On Thu 01 Feb 2018 at 10:55:35 (+), Brian wrote:
> > >
> > > Intended to do what?
> >
> > To leave the user without network connectivity after first boot? There
> > are at
Idem chez nous,
On a un nuage ownCloud pour tous l’institut depuis des années, cela offre une
multitude de services tout à fait standard et donc largement compris par une
multitude de clients (cloud, calendriers CalDAV, agendas CardDAV, WebMail avec
RoundCube intégré, …). Le tout intégrants
Curt wrote:
> Unfortunately my crypttab (which I've never touched or looked at)
> reveals the following:
>
> #
> cryptswap1 /dev/sda5 /dev/urandom swap,cipher=aes-cbc-essiv:sha256
>
> Which is dangerous because that dev/sda5 gets wiped out at every
> (re)boot.
>
>
On Thu 01 Feb 2018 at 17:48:18 (+0100), Nicolas George wrote:
> David Wright (2018-02-01):
> > That assumes it's stable. The OP said it's not. I'm making no judgment
> > on the matter.
>
> The OP described the use of an ephemeral key to encrypt the swap. Are
> you familiar with that practice?
On 2018-02-01, Curt wrote:
> On 2018-02-01, Nicolas George wrote:
>>
>>
>> David Wright (2018-02-01):
>>> As far as finding the swap partition with fstab, ISTR a workaround.
>>> Without the details, you make the swap partition with a tiny
>>> filesystem in it,
On 2018-02-01, Nicolas George wrote:
>
>
> David Wright (2018-02-01):
>> As far as finding the swap partition with fstab, ISTR a workaround.
>> Without the details, you make the swap partition with a tiny
>> filesystem in it, which gives it a stable UUID and LABEL. You then
>>
David Wright (2018-02-01):
> That assumes it's stable. The OP said it's not. I'm making no judgment
> on the matter.
The OP described the use of an ephemeral key to encrypt the swap. Are
you familiar with that practice? If not, better acknowledge it and let
the conversation pass by you.
> The
El 1 feb. 2018 5:41 p. m., "Maykel Franco"
escribió:
El día 1 de febrero de 2018, 17:28, Galvatorix Torixgalva
escribió:
> Asi a ojo, se me ocurren varias cosas:
> a) algun error en el comando al montar la unidad nfs
> b) la unidad nfs esta en
El día 1 de febrero de 2018, 17:28, Galvatorix Torixgalva
escribió:
> Asi a ojo, se me ocurren varias cosas:
> a) algun error en el comando al montar la unidad nfs
> b) la unidad nfs esta en una maquina con windows?, creo recordar que cuando
> windows se "apaga" usando
On Thu 01 Feb 2018 at 17:15:40 (+0100), Nicolas George wrote:
> David Wright (2018-02-01):
> > As far as finding the swap partition with fstab, ISTR a workaround.
> > Without the details, you make the swap partition with a tiny
> > filesystem in it, which gives it a stable UUID and LABEL. You then
Asi a ojo, se me ocurren varias cosas:
a) algun error en el comando al montar la unidad nfs
b) la unidad nfs esta en una maquina con windows?, creo recordar que cuando
windows se "apaga" usando el modo hibernacion da errores, a ver si es algo
de eso
c) la unidad nfs esta correcta?, es decir has
David Wright (2018-02-01):
> As far as finding the swap partition with fstab, ISTR a workaround.
> Without the details, you make the swap partition with a tiny
> filesystem in it, which gives it a stable UUID and LABEL. You then
> specify an offset in every reference to its use, which skips over
>
On Thu 01 Feb 2018 at 15:05:10 (+), Curt wrote:
> On 2018-02-01, David Wright wrote:
> >>
> >> Sorry but where does that leave
> >>
> >> /etc/initramfs-tools/conf.d/resume
> >>
> >>
> >> ???
> >>
> >> Also 'RESUME=none'?
> >
> > Yes; but AIUI the important one
On Thu 01 Feb 2018 at 10:55:35 (+), Brian wrote:
> On Wed 31 Jan 2018 at 20:05:17 -0600, David Wright wrote:
>
> > On Wed 31 Jan 2018 at 23:13:52 (+), Brian wrote:
> > > On Wed 31 Jan 2018 at 12:29:38 -0600, David Wright wrote:
> > >
> > > > On Fri 19 Jan 2018 at 19:09:27 (+), Brian
buenas tardes montar una unidad nfs hubiera sido lo más fácil y rápido pero
me estaba dando errores, y como siempre, va con prisas la cosa.
mount: wrong fs type, bad option, bad superblock on 192.168.1.190:
/var/export,
missing codepage or helper program, or other error
(for several
On 2018-02-01, David Wright wrote:
>>
>> Sorry but where does that leave
>>
>> /etc/initramfs-tools/conf.d/resume
>>
>>
>> ???
>>
>> Also 'RESUME=none'?
>
> Yes; but AIUI the important one is the one in the initramfs as that's
> the one that gets looked at when you
On Wednesday, 31 January 2018 21:12:37 CET Stefan Pietsch wrote:
> Jan 31 20:58:11 debiansid systemd[1]: dnsmasq.service: Permission denied
> while opening PID file or unsafe symlink chain: /run/dnsmasq/dnsmasq.pid
May be apparmor blocked this request.
Can you check your kernel logs ?
HTH
--
Si el archivo está en otra máquina, usa un tunel ssh para descomprimirlo.
Una búsqueda en Google te daría pistas al respecto.
El 1 feb. 2018 9:49 a. m., "miguel angel gonzalez"
escribió:
> Buenas tardes,
> necesito descomprimir un tar gz al vuelo, es decir, que elimine
I experienced this today (Fed 1, 2018)
El 1 de febrero de 2018, 14:48, miguel angel gonzalez
escribió:
>
> Buenas tardes,
> necesito descomprimir un tar gz al vuelo, es decir, que elimine el fichero
> origen, el problema que tengo es el espacio, no tengo espacio para tener el
> fichero descomprimido y el
On Thu 01 Feb 2018 at 13:11:20 (+), Curt wrote:
> On 2018-02-01, Curt wrote:
> >>
> >> https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=3D885160
> >
> > Your very own bug report.
> >
> >> It includes an easy workaround: include "RESUME=none" in
> >>
On 2018-02-01, Curt wrote:
> On 2018-02-01, Curt wrote:
>> On 2018-02-01, Curt wrote:
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=3D885160
>>>
>>> Your very own bug report.
>>>
It includes an easy workaround: include
Buenas tardes,
necesito descomprimir un tar gz al vuelo, es decir, que elimine el fichero
origen, el problema que tengo es el espacio, no tengo espacio para tener el
fichero descomprimido y el tar.gz en la partición /var y no puedo ampliar
el lv, política de empresa.
¿Se os ocurre algo?
Gracias!
On 2018-02-01, Curt wrote:
> On 2018-02-01, Curt wrote:
>>>
>>> https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=3D885160
>>
>> Your very own bug report.
>>
>>> It includes an easy workaround: include "RESUME=none" in
>>> /etc/initramfs-tools/initramfs.conf.
>>
>
>
On 2018-02-01, Curt wrote:
>>
>> https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=3D885160
>
> Your very own bug report.
>
>> It includes an easy workaround: include "RESUME=none" in
>> /etc/initramfs-tools/initramfs.conf.
>
Sorry but where does that leave
On 2018-02-01, Nicolas George wrote:
>
> Curt (2018-02-01):
>> It's something like "Tired of waiting for resume/suspend."
>
>> cryptsetup: WARNING: target cryptswap1 has a random key, skipped
>
> See this bug report:
>
> https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=3D885160
Curt (2018-02-01):
> It's something like "Tired of waiting for resume/suspend."
> cryptsetup: WARNING: target cryptswap1 has a random key, skipped
See this bug report:
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=885160
It includes an easy workaround: include "RESUME=none" in
I've upgraded from Wheezy to Jessie and from Jessie to Stretch, which is
a stretch, where I am currently residing (switched to the devil systemd,
too).
Unfamiliar with systemd commands, etc, I can't seem to find for the
moment the exact message (after a minor delay) at boot which brings me here
On 30 January 2018 at 13:22, Greg Wooledge wrote:
> On Tue, Jan 30, 2018 at 12:13:47PM +0100, Michael Lange wrote:
> > Michael Fothergill wrote:
> > > The response from Greg was the following:
> > >
> > > On Thu, Jan 25, 2018 at 12:36:46PM
Tranquilo, mas necessidade é algo muito subjetivo, valer a pena
também, infelizmente, seu comentário não responde minha pergunta e é
irrelevante, irei ignorar seus comentários a partir de agora. Bom dia.
Em 1 de fevereiro de 2018 08:02, escreveu:
>
>
> Le 1 février 2018
Le 1 février 2018 09:37:12 GMT-02:00, Rodolfo a écrit :
>
>Alguém poderia me informar algo sobre BCache?
>
>Quero comprar um SSD para isso, mas estou com uma dúvida se o SSD
>precisa ser do mesmo tamanho do HDD.
Se precisasse, não valia a pena.
--
Envoyé de mon appareil
Bom dia a todos,
Alguém poderia me informar algo sobre BCache?
Quero comprar um SSD para isso, mas estou com uma dúvida se o SSD
precisa ser do mesmo tamanho do HDD. Em uma rápida pesquisa no google
não achei essa informação.
Obrigado :)
Rodolfo Azevedo
On Wed 31 Jan 2018 at 20:05:17 -0600, David Wright wrote:
> On Wed 31 Jan 2018 at 23:13:52 (+), Brian wrote:
> > On Wed 31 Jan 2018 at 12:29:38 -0600, David Wright wrote:
> >
> > > On Fri 19 Jan 2018 at 19:09:27 (+), Brian wrote:
> > > > On Sat 20 Jan 2018 at 03:25:00 +0900, Mark
'lut,
Je cherche un outils simple pour faire de la gestion de mes contacts et de mon agenda.
Et, dans la foulée, proposer tout cela à la famille.
[zap]
Vous avez des conseils ou un retour d'expérience à me donner ?
J'utilise un serveur perso owncloud depuis 3 ans environ avec un 6
agendas et
Hola.
Bon dia.
Algú e la llista em podria posar en contacte amb un administrador (per eMAIL)
No em puc donar de baixar de cap manera.
El correu amb el qual em vaig donar d'alta ha canviat, I tot I que rebo eMAILS
no puc fer la baixa.
Salut
Josep Molero i Puig
Project Manager
UNITED CAPS
Hola Lista,
Estoy teniendo un problema medio extraño, tengo un software para el manejo de
VPSs que funciona con Xen
los bridges los hace con openvswith los DomUs los levanta con un demonio que
corre en segundo plano.
En Debian Wheezy con su script en /etc/init.d ( usando sysvinit ) funciona
On Wed, Jan 31, 2018 at 09:22:24PM CET, Jean-Marc said:
> salut la liste,
>
> Je cherche un outils simple pour faire de la gestion de mes contacts et de
> mon agenda.
>
> Et, dans la foulée, proposer tout cela à la famille.
>
> Donc, un petit serveur CalDAV/CardDAV avec une
61 matches
Mail list logo