Paul M Foster wrote:
> Folks:
>
> In my /etc/hosts file, there's a line:
>
> 127.0.1.1 yosemite.mars.lan yosemite
>
> I think Debian put it there.
>
> Later in the file, I've got:
>
> 192.168.254.30 yosemite.mars.lan yosemite
>
> So there are two entries for the same (my) machine. Is
My notebook has Trixie for most packages, then some from Bookworm and a
few form Sid.
Pipewire used to output sound just fine until yesterday, when I upgraded
the whole system via aptitude and rebooted.
Until yesterday I also had rc-buggy in my sources-list, but then I
removed it (before
On Fri, May 24, 2024 at 08:14:16AM -0400, Stephen P. Molnar wrote:
> E: Release file for
> http://debian.uchicago.edu/debian/dists/bookworm-updates/InRelease is
> expired (invalid since 1d 15h 6min 44s). Updates for this repository will
> not be applied.
Slightly worrisome.
> deb
On Fri, May 24, 2024 at 08:05:43AM -0400, Paul M Foster wrote:
> Folks:
>
> In my /etc/hosts file, there's a line:
>
> 127.0.1.1 yosemite.mars.lan yosemite
>
> I think Debian put it there.
Correct. This is the address that will be used if you don't have a
static LAN address.
> Later in the
During a routine update I got the error:
E: Release file for
http://debian.uchicago.edu/debian/dists/bookworm-updates/InRelease is
expired (invalid since 1d 15h 6min 44s). Updates for this repository
will not be applied.
/etc/apt/sources.lis entries are:
# deb cdrom:[Debian GNU/Linux
Gostaria de saber melhor sobre esse assunto.
Acho que o zelo da credibilidade da lista compete a todos.
Mesmo que seja algo noticioso, e' valido discutirmos.
On 23/05/2024 12:55, Atenágoras Silva wrote:
Pode explicar melhor o problema?
Em qui., 23 de mai. de 2024 às 08:38, Paulo Correia
Folks:
In my /etc/hosts file, there's a line:
127.0.1.1 yosemite.mars.lan yosemite
I think Debian put it there.
Later in the file, I've got:
192.168.254.30 yosemite.mars.lan yosemite
So there are two entries for the same (my) machine. Is this a problem?
Specifically, could it cause
Hi folks,
if I migrate from grub-pc to grub-uefi, then grub-pc.postrm
removes /etc/default/grub on the final purge.
grub2 doesn't provide much information in its man pages, but
AFAICT /etc/default/grub is still processed for UEFI, so why
is it deleted?
Regards
Harri
Bon dia,
M'agradaria saber, si algú ho sap explicar o té referències, què és el
què fa que s'enregistrin aquestes temptatives d'inici de sessió quan
arrenca el sistema operatiu:
$ sudo journalctl -b -p err
may 24 08:54:23 system nologin[11802]: Attempted login by UNKNOWN (UID:
1) on UNKNOWN
Hi,
Hans wrote:
> > I want to make sure, that the correct USB-stick is used.
> > Thus I can do by using the UUID of the target stick like
> > dd if=/path/to/myfile.iso of=UUID="123456-abcd-"
David Wright wrote:
> # dd of=/dev/disk/by-id/JetFlash_Transcend_4GB_JKNB2FYG-0:0 … …
Suppression Envoyé depuis mon appareil GalaxySupprimer m. Briquet Jacques qui
est décédé
Supprimer m. Briquet de votre liste Il est décédé Envoyé depuis mon appareil
Galaxy
On Wed 22 May 2024 at 21:19:35 (+0200), Hans wrote:
> I am booting a lie system from USB-stick. In this live system I am creating
> an
> ISO-file, which I then want to dd onto another USB-stick.
Do you want to copy the ISO to a file, a partition, or
the whole device?
> As I am doing this with
- Mail original -
De: "Olivier"
À: "ML Debian User French"
Envoyé: Jeudi 23 Mai 2024 13:03:37
Objet: Comment éditer un fichier .dwg sous Debian ?
Bonjour,
Il m'arrive d'échanger des données avec des architectes ou bureaux
d'études qui publient des plans de bâtiment au format DWG
On Thu, May 23, 2024 at 03:17:00PM -0400, Jeffrey Walton wrote:
[...]
> > If your LAN is isolated, you can basically do whatever you
> > want.
>
> And then act surprised when networking breaks :)
You just have to understand what's going on, that's all
>
> > And then there are "special" TLDs
On Thu, May 23, 2024 at 2:54 PM wrote:
>
> On Thu, May 23, 2024 at 01:50:21PM -0400, Jeffrey Walton wrote:
> > On Thu, May 23, 2024 at 12:08 PM Paul M Foster
> > wrote:
> > >
> > > On Thu, May 23, 2024 at 12:54:31AM -0400, Jeffrey Walton wrote:
> > >[...]
> > > > Also, I think you should be
On Thu, May 23, 2024 at 01:50:21PM -0400, Jeffrey Walton wrote:
> On Thu, May 23, 2024 at 12:08 PM Paul M Foster
> wrote:
> >
> > On Thu, May 23, 2024 at 12:54:31AM -0400, Jeffrey Walton wrote:
> >[...]
> > > Also, I think you should be using *.home.arpa, and not *.lan.
> > > home.arpa is
On Thu, May 23, 2024 at 01:50:21PM -0400, Jeffrey Walton wrote:
> On Thu, May 23, 2024 at 12:08 PM Paul M Foster
> wrote:
> >
> > On Thu, May 23, 2024 at 12:54:31AM -0400, Jeffrey Walton wrote:
> >[...]
> > > Also, I think you should be using *.home.arpa, and not *.lan.
> > > home.arpa is
On Thu, May 23, 2024 at 12:08 PM Paul M Foster wrote:
>
> On Thu, May 23, 2024 at 12:54:31AM -0400, Jeffrey Walton wrote:
>[...]
> > Also, I think you should be using *.home.arpa, and not *.lan.
> > home.arpa is reserved for private use by ICANN and the IETF. I suspect
> > *.lan is not reserved
Merci beaucoup pour toutes ces infos, je vais regarder ca. :-)
Le 23/05/2024 à 06:54, Jean-Claude Marquès a écrit :
Bonjour
J'ai la même version sur un vieux portable :
$ cat /etc/debian_version
10.13
avec xfce comme environnement graphique
La commande :
apt-cache depends okular|grep
Bonjour,
Il m'arrive d'échanger des données avec des architectes ou bureaux
d'études qui publient des plans de bâtiment au format DWG d'AutoCAD.
J'ai besoin d'ajouter des symboles (représentant des points d'accès
WiFi) sur ces plans à partir de mon PC (j'en ai un sous Bullseye et un
autre sous
Bonjour,
je n'ai jamais utilisé ce qui suit, mais la doc Freecad détaille les
trois façons (modules externes: logiciel libre (à compiler), freeware
(paquet Debian), logiciel commercial (40€)) dont ce logiciel peut
importer des fichiers .dwg :
Pode explicar melhor o problema?
Em qui., 23 de mai. de 2024 às 08:38, Paulo Correia
escreveu:
>
> As centrais telefônicas, estão fazendo ligações se passando por qualquer
> número.
> Todas as operadoras tem que se unir para colocar senha na Rede, assim
> impedir que isso ocorra.
> Ou seja
J'ai essayé LibreCAD sur Bullseye et Bookworm avec respectivement des
messages d'erreur définitive ou d'avertissement.
Sur Bookworm, LibreCAD conseillait de convertir le fichier en DXF car
"le support du DWG dans LibreCAD est incomplet".
Je reste curieux vis à vis de retour d'expérience sur
librecad peut-être qui est dans les dépôts stable
> > Bonjour,
> >
> > Il m'arrive d'échanger des données avec des architectes ou bureaux
> > d'études qui publient des plans de bâtiment au format DWG
> > d'AutoCAD.
> >
> > J'ai besoin d'ajouter des symboles (représentant des points d'accès
> >
Welcome to TNG eWallet Careline Support! We have received your inquiry and
happy to assist you.
In order for us to assist you further, please sign up an account by clicking
the link at the bottom of this email.
Upon signed up, a ticket number will be sent to you in a separate email and our
Le Thu, 23 May 2024 13:03:37 +0200,
Olivier a écrit :
> Bonjour,
>
> Il m'arrive d'échanger des données avec des architectes ou bureaux
> d'études qui publient des plans de bâtiment au format DWG d'AutoCAD.
>
> J'ai besoin d'ajouter des symboles (représentant des points d'accès
> WiFi) sur ces
On Thu, May 23, 2024 at 12:09:42PM +0200, local10 wrote:
> May 23, 2024, 02:11 by 2695bd53d...@ewoof.net:
>
> > Works fine for me too, on the same firefox-esr package version.
> >
> > If clearing the browser cache doesn't help, try with a brand new fresh
> > profile. `firefox --no-remote
On Thu, May 23, 2024 at 07:53:31AM -0400, Paul M Foster wrote:
> On Thu, May 23, 2024 at 12:54:31AM -0400, Jeffrey Walton wrote:
>
> > On Thu, May 23, 2024 at 12:43 AM Paul M Foster
> > wrote:
>
> [snip]
> >
> > On the video server, run nslookup and see if it can resolve
> >
On Thu, May 23, 2024 at 07:53:31AM -0400, Paul M Foster wrote:
> Nslookup fails. However, yosemite.mars.lan is in the hosts file and you
> can successfully ping it. It has a fixed (local) IP, which was set in the
> router. I don't understand why nslookup fails when buckaroo knows who
> yosemite
On Thu, May 23, 2024 at 07:19:08AM +0200, Kamil Jońca wrote:
> Kamil Jońca writes:
>
> [...]
> > [...]
> >> action "relay" relay host smtp+notls://pa...@yosemite.mars.lan:25 auth
> >>
> >>
> >
> > I have some opensmtpd config around and this line should work.
> > My suspects are:
> > 1.
On Thu, May 23, 2024 at 12:54:31AM -0400, Jeffrey Walton wrote:
> On Thu, May 23, 2024 at 12:43 AM Paul M Foster
> wrote:
[snip]
>
> On the video server, run nslookup and see if it can resolve yosemite.mars.lan.
Nslookup fails. However, yosemite.mars.lan is in the hosts file and you
can
On Thu, May 23, 2024 at 07:46:30AM -0400, Paul M Foster wrote:
> On Thu, May 23, 2024 at 06:38:11AM +0200, to...@tuxteam.de wrote:
[...]
> > Have you tried leaving out the "paul@" part? [...]
> The smarthost URL is straight out of the man page. The "paulf@" part allows
> OpenSMTP to figure
On Thu, May 23, 2024 at 06:38:11AM +0200, to...@tuxteam.de wrote:
> On Wed, May 22, 2024 at 09:37:18PM -0400, Paul M Foster wrote:
> > Folks:
> >
> > Here's a shot in the dark. I've looked up and down the internet, and can't
> > find a solution.
>
> [...]
>
> > "warn: Failed to parse smarthost
As centrais telefônicas, estão fazendo ligações se passando por qualquer número.
Todas as operadoras tem que se unir para colocar senha na Rede, assim impedir
que isso ocorra.
Ou seja podem utilizar o seu número para fazer chamada sem utilizar sem
telefone/celular e com isso aplicar golpes.
Bonjour,
Il m'arrive d'échanger des données avec des architectes ou bureaux
d'études qui publient des plans de bâtiment au format DWG d'AutoCAD.
J'ai besoin d'ajouter des symboles (représentant des points d'accès
WiFi) sur ces plans à partir de mon PC (j'en ai un sous Bullseye et un
autre sous
May 23, 2024, 02:11 by 2695bd53d...@ewoof.net:
> Works fine for me too, on the same firefox-esr package version.
>
> If clearing the browser cache doesn't help, try with a brand new fresh
> profile. `firefox --no-remote --new-instance --ProfileManager` should
> be a good start. If it works in a
Seguint el que deia l'Àlex:
> /I had a similar problem with Ubuntu 22.04 and a Lenovo Thinkpad. I found
> out that in my BIOS setup there is an option set that prevents new
> Thunderbolt devices from connecting to the computer. (Screens worked, but
> neither ethernet nor any USB device on the
Hello,
On Wed, May 22, 2024 at 05:03:34PM -0400, Stefan Monnier wrote:
> Hmm... I've been using a "plain old partition" for /boot (with
> everything else in LVM) for "ever", originally because the boot loader
> was not able to read LVM, and later out of habit. I was thinking of
> finally moving
On 22 May 2024 15:17 -0600, from charlescur...@charlescurley.com (Charles
Curley):
>> about a week ago when I started
>> to get a blank empty white page when trying to access the Tutanota
>> login page: https://mail.tutanota.com/login
>
> I get what looks like a proper log-in page on both
Bonjour
J'ai la même version sur un vieux portable :
$ cat /etc/debian_version
10.13
avec xfce comme environnement graphique
La commande :
apt-cache depends okular|grep Dépend|wc
donne le nombre de dépendances strictes de okular, qui est 47, mais j'ai
peut-être des versions i386 dans le lot,
Kamil Jońca writes:
[...]
> [...]
>> action "relay" relay host smtp+notls://pa...@yosemite.mars.lan:25 auth
>>
>>
>
> I have some opensmtpd config around and this line should work.
> My suspects are:
> 1. whitespaces / end lines - have you test your config with xxd to check
> if there CRLF for
Paul M Foster writes:
> Folks:
>
> Here's a shot in the dark. I've looked up and down the internet, and can't
> find a solution.
>
> I have a mini PC which just serves up videos. Daily it backs up to an
> attached drive. This happens with a script in /etc/cron.daily, which
> typically emails
On Thu, May 23, 2024 at 12:43 AM Paul M Foster wrote:
>
> Folks:
>
> Here's a shot in the dark. I've looked up and down the internet, and can't
> find a solution.
>
> I have a mini PC which just serves up videos. Daily it backs up to an
> attached drive. This happens with a script in
On Wed, May 22, 2024 at 09:37:18PM -0400, Paul M Foster wrote:
> Folks:
>
> Here's a shot in the dark. I've looked up and down the internet, and can't
> find a solution.
[...]
> "warn: Failed to parse smarthost smtp+notls://pa...@yosemite.mars.lan:25"
>
> Note that the "protocol" doesn't
Folks:
Here's a shot in the dark. I've looked up and down the internet, and can't
find a solution.
I have a mini PC which just serves up videos. Daily it backs up to an
attached drive. This happens with a script in /etc/cron.daily, which
typically emails results to root. In my case it's aliased
Bonjour,
sur une debian 10 sous xfce, je voudrais installer okular pour tester.
A l'install, synaptic veut enlever lpr et mettre cups-bsd à la place,
plus une centaine de fichiers.
Y a t'il un inconvénient pour lpr et cups-bsd?
Le nombre de fichiers supplémentaires me semble élevé pour une
On Wed, 22 May 2024 23:02:17 +0200 (CEST)
local10 wrote:
> Have been using Debian + Firefox with Tutanota email for a number of
> years and everything was fine until about a week ago when I started
> to get a blank empty white page when trying to access the Tutanota
> login page:
> I found this [1], quoting: "I'd also like to share an issue I've
> discovered: if /boot's partition is a LV, then there must not be a
> raidintegrity LV anywhere before that LV inside the same VG. Otherwise,
> update-grub will show an error (disk `lvmid/.../...' not found) and GRUB
> cannot
Hi,
Have been using Debian + Firefox with Tutanota email for a number of years and
everything was fine until about a week ago when I started to get a blank empty
white page when trying to access the Tutanota login page:
https://mail.tutanota.com/login
Tried https://mail.tutanota.com/login in
Si, el problema no és de la tarja de xarxa. Sembla que això està bé.
La màquina aquesta té un connector especial de thinkpad per
connectar-hi una interfície de xarxa. No hi havia caigut, la
interfície està disponible i està funcionant, però si no tens el
connector, res de res, és com si el cable
Am 22.05.2024 um 21:19:35 Uhr schrieb Hans:
> Whenever I dd to the target stick, does the UUID change? I know, the
> UUID of the partitions are changing, but what is with the device
> itself?
No. The UUID is part of the file system and will just be copied.
Mounting based on the UUID will be
Hi folks,
just aquestion.
I am booting a lie system from USB-stick. In this live system I am creating an
ISO-file, which I then want to dd onto another USB-stick.
As I am doing this with a script, I want to make sure, that the correct USB-
stick is used.
Thus I can do by using the UUID of
Hola Laura,
puedes probar con: xrandr --listproviders
$ xrandr --listproviders
Providers: number : 2
Provider 0: id: 0x1b8 cap: 0x1, Source Output crtcs: 4 outputs: 1
associated providers: 1 name:NVIDIA-0
Provider 1: id: 0x1fd cap: 0xf, Source Output, Sink Output, Source
Offload, Sink Offload
Bones;
En un servidor de centre de dades comercial, he trobat això:
$ lspci -s :00:1f.6 -k
00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection (2)
I219-LM (rev 31)
Subsystem: Fujitsu Technology Solutions Ethernet Connection (2) I219-LM
Kernel driver in use:
hola,
Tengo una duda acerca de cómo gestiona Debian el uso de las tarjetas
gráficas de mi portátil, un Lenovo G500s de hace unos cuantos años atrás.
Según parece el ordenador tiene 2 tarjetas gráficas, la intel y la Nvidia
GeForce GF117M. ¿Cómo puedo saber cuando está en uso una o la otra? Y,
Hello,
On Wed, May 22, 2024 at 10:13:06AM +, Andy Smith wrote:
> metadata tags to some PVs prevented grub from assembling them,
grub is indeed very fragile if you use dm-integrity anywhere on any of
your LVs on the same VG where /boot is (or at least if in the list
of LVs, the dm-integrity
Hello,
On Wed, May 22, 2024 at 08:57:38AM +0200, Marc SCHAEFER wrote:
> I will try this work-around and report back here. As I said, I can
> live with /boot on RAID without dm-integrity, as long as the rest can be
> dm-integrity+raid protected.
I'm interested in how you get on.
I don't (yet)
Hello,
On Wed, May 22, 2024 at 08:57:38AM +0200, Marc SCHAEFER wrote:
> I will try this work-around and report back here. As I said, I can
> live with /boot on RAID without dm-integrity, as long as the rest can be
> dm-integrity+raid protected.
So, enable dm-integrity on all LVs, including /,
Bon dia Àlex (a veure si ens veiem algun dia! :P)
Si, quan vaig veure que el tema era cosa de thunderbolt (una
tecnologia totalment nova per a mi), vaig veure que a la BIOS hi havia
nosequè de security i vaig posar-ho a disabled tal com vaig llegir a
algun fòrum.
Al no funcionar la tarja de xarxa
Additional info:
On Wed, May 22, 2024 at 08:49:56AM +0200, Marc SCHAEFER wrote:
> Having /boot on a LVM non enabled dm-integrity logical volume does not
> work either, as soon as there is ANY LVM dm-integrity enabled logical
> volume anywhere (even not linked to booting), grub2 complains (at boot
Hello,
On Tue, May 21, 2024 at 08:41:58PM +0200, Franco Martelli wrote:
> I can only recommend you to read carefully the Wiki:
> https://raid.wiki.kernel.org/index.php/Dm-integrity
I did, and it looks it does not seem to document anything pertaining
to my issue:
1) I don't use integritysetup
Bon dia BlackHold,
He llegit que el problema pot tenir a veure amb una opció de la BIOS:
/I had a similar problem with Ubuntu 22.04 and a Lenovo Thinkpad. I
found out that in my BIOS setup there is an option set that prevents new
Thunderbolt devices from connecting to the computer. (Screens
On Mon, Mar 04, 2024 at 02:03:32PM +0800, jeremy ardley wrote:
> I completely removed system-resolved as when it is installed it changes the
> DNS configuration to be non-standard
The issues described in this thread are related to libnss-resolve, which
is no longer installed in the Debian 12
On 20/05/24 at 14:35, Marc SCHAEFER wrote:
Any idea what could be the problem? Any way to just make grub2 ignore
the rimage (sub)volumes at setup and boot time? (I could live with / aka
vg1/root not using dm-integrity, as long as the data/docker/etc volumes
are integrity-protected) ? Or how
Val! #etfelicitofill se m'ha ocorregut desconnectar el cable
thunderbold de la dock "Lenovo ThinkPad Thunderbolt 3 Dock Gen2
40AN0135EU" i la interfície que faig referència segueix apareguent,
així que entenc que la interfície de xarxa que detecta és la que està
físicament a la màquina i
Bona tarda,
Per fi tinc portàtil nou i aquest cop entre mans tinc un flamant
thinkpad x390 amb la seva dockstation pija.
Tot funciona correctament excepte la xarxa (que està a la dock). A la
dock que tenia abans amb l'altre portàtil no havia aconseguit fer
funcionar mai el displayport, però en
Am 20.05.2024 um 12:59:40 Uhr schrieb Van Snyder:
> When I boot, there's junk (mixed graphics and text that seems to be
> out of sync) on one, and the other is dark. When I reboot, it's
> almost the same, except the monitors' roles have switched.
>
> The graphics chip is NVidia G58M (GeForce
Van Snyder wrote:
> I have some DisplayLink e1649Fwu USB monitors.
>
> When I boot, there's junk (mixed graphics and text that seems to be out
> of sync) on one, and the other is dark. When I reboot, it's almost the
> same, except the monitors' roles have switched.
>
> Would the nouveau driver
This is probably not specific to Dell Vostro.
I have a Dell Vostro 1700 running Debian Trixie.
I have some DisplayLink e1649Fwu USB monitors.
When I boot, there's junk (mixed graphics and text that seems to be out
of sync) on one, and the other is dark. When I reboot, it's almost the
same,
Try to use a configuration file /etc/X11/xorg.conf.
Yes, I know, the modern drivers do not need it any more, but when you want to
force some settings, this can help.
I attach mine at this message, which was running fine so far and has all the
settings inside, you might want to use.
This file
Am 20.05.2024 um 12:22:48 Uhr schrieb Van Snyder:
> How do I switch to try nouveau instead?
Completely uninstall it.
Then reboot.
If you have problem with nouveau, tell about them and maybe they can be
fixed.
--
kind regards
Marco
Send unsolicited bulk mail to 1716200568mu...@cartoonies.org
On Mon, 2024-05-20 at 20:42 +0200, Marco Moock wrote:
> Am 20.05.2024 um 11:10:27 Uhr schrieb Van Snyder:
>
> > I installed the NVidia 340 driver
>
> Is there a special reason to use it instead of nouveau?
I had had trouble with nouveau on other computers using different
NVidia graphics. And I
Am 20.05.2024 um 11:10:27 Uhr schrieb Van Snyder:
> I installed the NVidia 340 driver
Is there a special reason to use it instead of nouveau?
--
Gruß
Marco
Send unsolicited bulk mail to 1716196227mu...@cartoonies.org
I have an old Dell Vostro 1700 running Debian Trixie. It has an NVidia
G86M (GeForce 8400M) graphics chip. I installed the NVidia 340 driver
(which is difficult to find).
I attached a HP 14" monitor to the VGA socket.
When I booted, it came up with side-by-side displays. I could move
windows
El día 20/05/2024, a las 15:50, Camaleón escribió:
> Parece un problema conocido relacionado con los controladores de audio
> y/o el subsistema de gestión de sonido (PulseAudio/Jackd/ALSA, etc...).
>
> Mira a ver qué driver o stack de sonido instala/usa Raspberry Pi OS¹,
> donde seguramente
El 2024-05-20 a las 11:49 +0200, Alfon escribió:
> He seguido los pasos para instalar Debian descritos en:
> https://wiki.debian.org/RaspberryPi4#Using_EFI_Firmware_and_the_regular_Debian_Installer
>
> Y todo ha ido bien, excepto que no tengo puedo usar la GPU para ver
> vídeos con mpv y tampoco
Hello,
1. INITIAL SITUATION: WORKS (no dm-integrity at all)
I have a Debian bookwork uptodate system that boots correctly with
kernel 6.1.0-21-amd64.
It is setup like this:
- /dev/nvme1n1p1 is /boot/efi
- /dev/nvme0n1p2 and /dev/nvme1n1p2 are the two LVM physical volumes
- a volume
On 20 May 2024 07:00 -0400, from d...@randomstring.org (Dan Ritter):
>> # fail2ban-server -V
>>
>> 0.11.2
>
> Bullseye became stable in August of 2021.
It's also perhaps worth noting that there seem to have been only two
interim releases.
https://github.com/fail2ban/fail2ban/releases lists
Maurizio Caloro wrote:
> Hello
>
> Please why on Debian Bullseye, 11.9 is a pretty old version available in the
> repository?
>
> # fail2ban-server -V
>
> 0.11.2
Bullseye became stable in August of 2021.
"Stable" means that packages don't change except to fix serious
bugs, especially
Hello
Please why on Debian Bullseye, 11.9 is a pretty old version available in the
repository?
# fail2ban-server -V
0.11.2
I think this application arnt a big thing?
Available on github, Version 1.1.0
Hola lista,
He seguido los pasos para instalar Debian descritos en:
https://wiki.debian.org/RaspberryPi4#Using_EFI_Firmware_and_the_regular_Debian_Installer
Y todo ha ido bien, excepto que no tengo puedo usar la GPU para ver
vídeos con mpv y tampoco tengo sonido. Me interesa esto último,
On Fri May 17, 2024 at 11:56 AM BST, Max Nikulin wrote:
> You may file an issue to the emacs bug tracker.
I didn't realise this was coming straight from upstream. If it were
a Debian-local issue, I'd file something, but I will respectfully
decline to engage with Emacs upstream.
(Interesting to
On 19 May 2024 11:11 -0400, from monn...@iro.umontreal.ca (Stefan Monnier):
>> If you have read permission on a directory but *not* execute permissions,
>> then the only thing you can do is read the contents of that directory --
>> the filenames and their inode numbers. You cannot stat() the
On Sun, May 19, 2024 at 05:15:40PM +0200, Richard wrote:
> Then where does the combination rwx come in here? With read the app knows
> the file is there, with write it writes to the file. Question is, where the
> necessity would be to know the owner of the file or even the kind. The
> logger is
Then where does the combination rwx come in here? With read the app knows
the file is there, with write it writes to the file. Question is, where the
necessity would be to know the owner of the file or even the kind. The
logger is supposed to just append text to a file. If it were trying to
append
> If you have read permission on a directory but *not* execute permissions,
> then the only thing you can do is read the contents of that directory --
> the filenames and their inode numbers. You cannot stat() the files,
> so you can't see who owns them or even what kind of files they are.
> Just
On Sun, May 19, 2024 at 04:55:09PM +0200, Richard wrote:
> Dovecot expects execution permissions on the directory it writes the logs
> to. Because "Standard POSIX permissions for a non-root process to enter a
> directory." How on earth is that even a thing?
That's how Unix permissions have always
So, I've just written to the Dovecot mailing list, the reality why Dovecot
is complaining is so much worse than anything I could have imagined. While
everything indicates Dovecot is able to write to the log files, it seems
Dovecot expects execution permissions on the directory it writes the logs
Le 19/05/2024, Timothy M Butterworth a écrit:
> sudo sync && sh -c "/usr/bin/echo 1 > /proc/sys/vm/drop_caches"
--w--- 1 root root 0 19 mai 13:11 /proc/sys/vm/drop_caches
The redirection won't work unless the person is already root—there was a
thread about this here just a few days ago.
On Sat, May 18, 2024 at 5:53 PM Stephen P. Molnar
wrote:
> I have just installed installed Quickemu v-6.1.4.
>
> quickget windows 11 ran as it should without any errors or warnings.
> However:
> (base) comp@Abanormal:~/VM$ quickemu --vm windows-10.conf
> ~/VM ~/VM
>
On Wed, May 15, 2024 at 12:28:44AM +, fxkl4...@protonmail.com wrote:
> i was plundering around and found a new, to me, utility
> is any one using usbip
> is it usable or cluncky
> sounds like it might be handy
>
I've tried it for a couple of things with little success:
* Black Magic ATEM
On Sat, May 18, 2024 at 11:56:06AM -0400, Stephen P. Molnar wrote:
> I have just installed installed Quickemu v-6.1.4.
>
> quickget windows 11 ran as it should without any errors or warnings.
> However:
> (base) comp@Abanormal:~/VM$ quickemu --vm windows-10.conf
> ~/VM ~/VM
>
Everyone,
First of all thanks for the input. Unfortunately, I have to apologize,
because the actual problem was somewhat silly: selinux appears to be
preventing only *root* login at the tty, which I neglected to mention.
(Also, I neglected to check until now).
Regular user logins are fine.
I have just installed installed Quickemu v-6.1.4.
quickget windows 11 ran as it should without any errors or warnings.
However:
(base) comp@Abanormal:~/VM$ quickemu --vm windows-10.conf
~/VM ~/VM
Quickemu 4.9.4 using /usr/bin/qemu-system-x86_64 v7.2.9
- Host:
Hi Maurizio,
On Sat, May 18, 2024 at 03:45:54PM +0200, Maurizio Caloro wrote:
> Please any from you use postfix with BATV (Bounce address tag validation)
> here ?
>
> And/or it's this is part of the standard?
I don't run Postfix and while I have heard of BATV I've never looked
into it. I just
Please any from you use postfix with BATV (Bounce address tag validation)
here ?
And/or it's this is part of the standard?
On Sat, May 18, 2024 at 08:26:55PM +0700, Max Nikulin wrote:
> On 17/05/2024 18:10, Greg Wooledge wrote:
> > > On 17/05/2024 10:16, Karl Vogel wrote:
> > > > https://github.com/aaronsw/html2text/ might interest you. It
> > > > converts
> > > > (relatively) sane HTML into Markdown.
> > >
On 17/05/2024 18:10, Greg Wooledge wrote:
On 17/05/2024 10:16, Karl Vogel wrote:
https://github.com/aaronsw/html2text/ might interest you. It converts
(relatively) sane HTML into Markdown.
I put html2text.py into $HOME/lib and use this to call it:
#!/bin/sh
#
[...]
Hello
Thanks for reply yes, i have put now this, I have peace now
#cat postfix-addon.conf
[INCLUDES]
before = common.conf
[Definition]
_daemon = postfix/smtpd
failregex = ^%(__prefix_line)sNOQUEUE: reject: RCPT from \S+\[\]: 554
5\.2\.1 .*$
^%(__prefix_line)sNOQUEUE: reject: RCPT from
1 - 100 of 1658026 matches
Mail list logo
