/firmware-ipw3945
and reload the driver module ipw3945:
modprobe -r ipw3945
modprobe ipw3945
Also check your dmesg output.
regards
Andreas Janssen
--
Andreas Janssen [EMAIL PROTECTED]
PGP-Key-ID: 0xDC801674 ICQ #17079270
Registered Linux User #267976
http://www.andreas-janssen.de/debian
. It is a debian precompiled binary,
so where can I find that out?
Download the Debian source packages (e.g. using apt-get source freetype
or using dget, unpack the archive (dpkg-source -x freetype-x.y.z.dsc)
and check the debian subdirectory, especially the rules file.
regards
Andreas Janssen
Ulrich Hiller ([EMAIL PROTECTED]) wrote:
Andreas Janssen wrote:
Install the following package:
http://packages.debian.org/etch/firmware-ipw3945
and reload the driver module ipw3945:
modprobe -r ipw3945
modprobe ipw3945
Also check your dmesg output.
Thank you for the quick answer.
I
.
Search in /etc/initramfs-tools if you have a reference to
/sbin/update-grub, and change it to /usr/sbin/grub.
The messages that you remember recommended to edit /etc/kernel-img.conf
and to change /sbin/update-grub to update-grub.
regards
Andreas Janssen
--
Andreas Janssen [EMAIL
2.6.25-2-686 on you Etch system from source and
then install the result.
Or you could install 2.6.25 from
http://www.backports.org/dokuwiki/doku.php
regards
Andreas Janssen
--
Andreas Janssen [EMAIL PROTECTED]
PGP-Key-ID: 0xDC801674 ICQ #17079270
Registered Linux User #267976
http
and not supported by the Debian security team
anymore.
regards
Andreas Janssen
--
Andreas Janssen [EMAIL PROTECTED]
PGP-Key-ID: 0xDC801674 ICQ #17079270
Registered Linux User #267976
http://www.andreas-janssen.de/debian-tipps.html
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED
-2.6.24-1-686
Is this correct? Thanks in advance!
I have not tested this for the root partition, but if you use initramfs
for your initrd, which includes udev in the initial ram disk, you
should be able to access /dev/disk/by-uuid/UUID
regards
Andreas Janssen
--
Andreas Janssen
if you
already have a default gateway (at least if you use the noauth option,
as far as I know). You need to explicitely allow this using the
replacedefaultroute
option in /etc/ppp/peers/kppp or /etc/ppp/options.
regards
Andreas Janssen
--
Andreas Janssen [EMAIL PROTECTED]
PGP-Key-ID
some more experience with the package management, because you
surely will run into changes dependency problems more often than with
Testing that with Stable. And, of course, don't forget to install
apt-listchanges.
regards
Andreas Janssen
--
Andreas Janssen [EMAIL PROTECTED]
PGP-Key-ID
to downgrade them, but downgrading is tricky and
not officially supported. I recommend you upgrade to Etch instead.
Don't forget to take a look at the Etch release notes first!
regards
Andreas Janssen
--
Andreas Janssen [EMAIL PROTECTED]
PGP-Key-ID: 0xDC801674 ICQ #17079270
Registered
with packages without security updates.
regards
Andreas Janssen
--
Andreas Janssen [EMAIL PROTECTED]
PGP-Key-ID: 0xDC801674 ICQ #17079270
Registered Linux User #267976
http://www.andreas-janssen.de/debian-tipps-sarge.html
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject
/updates main contrib non-free
deb-src http://security.debian.org/ etch/updates main contrib non-free
deb http://www.debian-multimedia.org/ etch main
Any comments?
http://www.us.debian.org/releases/etch/
regards
Andreas Janssen
--
Andreas Janssen [EMAIL PROTECTED]
PGP-Key-ID
that
everything works you can still boot into your system using your
passwords. Took me more that an hour of rebooting grml, cryptsetupping,
mounting, chrooting my root fs and rebuilding initrds until I had the
idea to do it another way.
regards
Andreas Janssen
--
Andreas Janssen [EMAIL PROTECTED
Salvatore Iovene ([EMAIL PROTECTED]) wrote:
On Mon, 30 Apr 2007 18:22:48 +0300 Salvatore Iovene
[EMAIL PROTECTED] wrote:
On Mon, 30 Apr 2007 15:14:44 +0200 Andreas Janssen
[EMAIL PROTECTED] wrote:
- add the key to the luks-Partitions using cryptsetup luksAddKey
- make an entry
, use apt-cache show $packagename
and apt-cache search $keyword to get more information on the packages
you are about to install.
regards
Andreas Janssen
--
Andreas Janssen [EMAIL PROTECTED]
PGP-Key-ID: 0xDC801674 ICQ #17079270
Registered Linux User #267976
http://www.andreas-janssen.de
Default User ([EMAIL PROTECTED]) wrote:
On Sun, 2007-04-29 at 00:14 +0200, Andreas Janssen wrote:
Default User ([EMAIL PROTECTED]) wrote:
On Sat, 2007-04-28 at 23:24 +0200, Andreas Janssen wrote:
Default User ([EMAIL PROTECTED]) wrote:
I think one of them uses a ralink chipset, which
package.
**
The Etch release notes have some info on this problem.
regards
Andreas Janssen
--
Andreas Janssen [EMAIL PROTECTED]
PGP-Key-ID: 0xDC801674 ICQ #17079270
Registered Linux User #267976
http://www.andreas-janssen.de/debian-tipps-sarge.html
--
To UNSUBSCRIBE, email
Andreas Janssen
--
Andreas Janssen [EMAIL PROTECTED]
PGP-Key-ID: 0xDC801674 ICQ #17079270
Registered Linux User #267976
http://www.andreas-janssen.de/debian-tipps-sarge.html
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
applications need the RAM. The second line shows you how much RAM is
used without the cache. Also take a look at top or htop.
regards
Andreas Janssen
--
Andreas Janssen [EMAIL PROTECTED]
PGP-Key-ID: 0xDC801674 ICQ #17079270
Registered Linux User #267976
http://www.andreas-janssen.de/debian-tipps
much swap is being used?
And of course, how fast is your CPU?
regards
Andreas Janssen
--
Andreas Janssen [EMAIL PROTECTED]
PGP-Key-ID: 0xDC801674 ICQ #17079270
Registered Linux User #267976
http://www.andreas-janssen.de/debian-tipps-sarge.html
--
To UNSUBSCRIBE, email to [EMAIL
driver.
Packages are available in non-free, so you also need to build them
using non-free. If you want to buy Netgear adapters, take a close look
at the product name. An additional letter or number can mean that is
uses a completely different chipset.
regards
Andreas Janssen
--
Andreas
Default User ([EMAIL PROTECTED]) wrote:
On Sat, 2007-04-28 at 23:24 +0200, Andreas Janssen wrote:
Default User ([EMAIL PROTECTED]) wrote:
I think one of them uses a ralink chipset, which means that there is
a driver available, however you need to compile and install it
yourself (e.g. using
userspace environment.
regards
Andreas Janssen
--
Andreas Janssen [EMAIL PROTECTED]
PGP-Key-ID: 0xDC801674 ICQ #17079270
Registered Linux User #267976
http://www.andreas-janssen.de/debian-tipps-sarge.html
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe
use udev, which generates device files and symlinks
dynamically. Take a look at /etc/udev/rules.d/z25_persistent-cd.rules.
regards
Andreas Janssen
--
Andreas Janssen [EMAIL PROTECTED]
PGP-Key-ID: 0xDC801674 ICQ #17079270
Registered Linux User #267976
http://www.andreas-janssen.de/debian
ist in den Sarge Release Notes beschrieben:
http://www.debian.org/releases/sarge/releasenotes
Grüße
Andreas Janssen
--
Andreas Janssen [EMAIL PROTECTED]
PGP-Key-ID: 0xDC801674 ICQ #17079270
Registered Linux User #267976
http://www.andreas-janssen.de/debian-tipps-sarge.html
--
Haeufig
:
Der Debian-Kernel hat den vesafb-Treiber als Modul, aber soweit ich weiß
ist das nur durch einen debianspezifischen Patch möglich, d.h. Du musst
bei Deinem eigenen Kernel den Treiber fest einbauen.
Grüße
Andreas Janssen
--
Andreas Janssen [EMAIL PROTECTED]
PGP-Key-ID: 0xDC801674 ICQ
sind. Oder ist das nicht so?
Es sollte so sein. Du solltest trotzdem sicherstellen daß in dem Fall
der vesafb-Treiber entweder im Kernel ist oder (Standard-
Debiankonfiguration) als Modul gebaut wurde, *und* in der initrd
vorhanden ist.
Grüße
Andreas Janssen
--
Andreas Janssen [EMAIL
.
Keine? Normalerweise sollte der Kernel doch bei einem ungültigen
Modus auf 80x25 zurückfallen?
Es kann Probleme geben wenn der Framebuffer-Treiber nicht geladen werden
kann - oder wenn der Monitor die Auflösung in der vorgegebenen Frequenz
nicht schafft.
Grüße
Andreas Janssen
.
AFAIK wird erst seit woody bei der Installation angeboten md5 statt
crypt zu verwenden.
*g* Das Woody rauskam ist ja auch /erst/ vier Jahre her.
Grüße
Andreas Janssen
--
Andreas Janssen [EMAIL PROTECTED]
PGP-Key-ID: 0xDC801674 ICQ #17079270
Registered Linux User #267976
http://www.andreas
installieren. Oder schauen ob man madwifi-tools in einem
32-Bit-Chroot verwenden kann.
Grüße
Andreas Janssen
--
Andreas Janssen [EMAIL PROTECTED]
PGP-Key-ID: 0xDC801674 ICQ #17079270
Registered Linux User #267976
http://www.andreas-janssen.de/debian-tipps-sarge.html
--
Haeufig gestellte Fragen
-r say, and what is the output of
ls -l /usr/src
regards
Andreas Janssen
--
Andreas Janssen [EMAIL PROTECTED]
PGP-Key-ID: 0xDC801674 ICQ #17079270
Registered Linux User #267976
http://www.andreas-janssen.de/debian-tipps-sarge.html
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED
Hallo
Al Bogner ([EMAIL PROTECTED]) wrote:
Am Sonntag, 30. Juli 2006 21:44 schrieb Andreas Janssen:
Installier nvidia-kernel-source und bau das Modulpaket mit
module-assistant. Alle benötigten nvidia-Pakete findest Du in
non-free (ggf. unstable nehmen wenn Du testing benutzt).
aptitude
. den Kernel. Der
neueste Kernel bei meinen Repositories ist nvidia-kernel-2.6.14-2-686.
Installier nvidia-kernel-source und bau das Modulpaket mit
module-assistant. Alle benötigten nvidia-Pakete findest Du in non-free
(ggf. unstable nehmen wenn Du testing benutzt).
Grüße
Andreas Janssen
gelesen... Fertig?!
Der fehlende Teil der Ausgabe gehört nicht zu apt-get update, sondern zu
Befehlen die den Status von Paketen ändern, z.B. upgrade, dist-upgrade,
install und remove.
Grüße
Andreas Janssen
--
Andreas Janssen [EMAIL PROTECTED]
PGP-Key-ID: 0xDC801674 ICQ #17079270
Registered
Hallo
nils reitnauer ([EMAIL PROTECTED]) wrote:
Andreas Janssen schrieb:
nils reitnauer ([EMAIL PROTECTED]) wrote:
..
OK http://ftp.de.debian.org sid/non-free Release
OK http://security.debian.org etch/updates/non-free Packages
OK http://security.debian.org etch/updates/non-free
Andreas Janssen
--
Andreas Janssen [EMAIL PROTECTED]
PGP-Key-ID: 0xDC801674 ICQ #17079270
Registered Linux User #267976
http://www.andreas-janssen.de/debian-tipps-sarge.html
--
Haeufig gestellte Fragen und Antworten (FAQ):
http://www.de.debian.org/debian-user-german-FAQ/
Zum AUSTRAGEN
.: Antworten bitte nur an die Liste, nicht zusätzlich noch an mich
persönlich
Grüße
Andreas Janssen
--
Andreas Janssen [EMAIL PROTECTED]
PGP-Key-ID: 0xDC801674 ICQ #17079270
Registered Linux User #267976
http://www.andreas-janssen.de/debian-tipps-sarge.html
--
Haeufig gestellte Fragen und
hast (und wie!), und welche Updates denn
nun genau vorgeschlagen wurden. Details findest Du aber auf
http://security.debian.org. Außerdem solltest Du als Benutzer die
Mailingliste debian-security-announce abonnieren, Mehr dazu findest Du
auf http://lists.debian.org.
Grüße
Andreas Janssen
. Ebenso
ipfwadm. Bei meinem (aktuellen) 2.6er kann ich davon nichts mehr
finden, frühere Kernel hatten das aber auch. Laut packages.debian.org
haben unter anderem die 2.6.8er Pakete für Sarge noch ipchains.ko
dabei, genauso wie ipfwadm.ko.
Grüße
Andreas Janssen
--
Andreas Janssen [EMAIL
with.
Is there a list somewhere or something
You can use dpkg-reconfigure with any package, but for most it won't ask
any questions. You can use debconf-get-selections from the
debconf-utils package to find out which packages ask questions.
best regards
Andreas Janssen
--
Andreas Janssen [EMAIL
in any archive. Probably because that version is outdated. By
the way, where did you get it from? It is not part of stable. I
recommend that you either upgrade or pin the installed version to
200.
best regards
Andreas Janssen
--
Andreas Janssen [EMAIL PROTECTED]
PGP-Key-ID: 0xDC801674 ICQ
branch, 2.6 is stable (more or less ;-))
best regards
Andreas Janssen
--
Andreas Janssen [EMAIL PROTECTED]
PGP-Key-ID: 0xDC801674 ICQ #17079270
Registered Linux User #267976
http://www.andreas-janssen.de/debian-tipps-sarge.html
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED
-move package
source is listed. If it is, move it to a higher position in your
sources.list and run apt-get update.
best regards
Andreas Janssen
--
Andreas Janssen [EMAIL PROTECTED]
PGP-Key-ID: 0xDC801674 ICQ #17079270
Registered Linux User #267976
http://www.andreas-janssen.de/debian-tipps
system on them that you want to
use.
best regards
Andreas Janssen
--
Andreas Janssen [EMAIL PROTECTED]
PGP-Key-ID: 0xDC801674 ICQ #17079270
Registered Linux User #267976
http://www.andreas-janssen.de/debian-tipps-sarge.html
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject
by the madwifi driver (atheros chip) and work with hostapd
and wpa_supplicant. They support 802.11 a/b/g. Please note that the USB
stick from the same product line uses another chipset.
best regards
Andreas Janssen
--
Andreas Janssen [EMAIL PROTECTED]
PGP-Key-ID: 0xDC801674 ICQ #17079270
an die MAC-Adressen binden.
Grüße
Andreas Janssen
--
Andreas Janssen [EMAIL PROTECTED]
PGP-Key-ID: 0xDC801674 ICQ #17079270
Registered Linux User #267976
http://www.andreas-janssen.de/debian-tipps-sarge.html
--
Haeufig gestellte Fragen und Antworten (FAQ):
http://www.de.debian.org
userspace
programs like udev from testing/unstable.
best regards
Andreas Janssen
--
Andreas Janssen [EMAIL PROTECTED]
PGP-Key-ID: 0xDC801674 ICQ #17079270
Registered Linux User #267976
http://www.andreas-janssen.de/debian-tipps-sarge.html
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED
Hello
Sed Nivo ([EMAIL PROTECTED]) wrote:
I want compile mplayer with ./configure, but compiler not find
bitypes.h.
Install apt-file, run apt-file update and
apt-file search bitypes.h
best regards
Andreas Janssen
--
Andreas Janssen [EMAIL PROTECTED]
PGP-Key-ID: 0xDC801674 ICQ
probably also
want to use AntiAliasing so smoothen the edges of your fonts. How you
activate it depends on which window manager/desktop environment you
use.
best regards
Andreas Janssen
--
Andreas Janssen [EMAIL PROTECTED]
PGP-Key-ID: 0xDC801674 ICQ #17079270
Registered Linux User #267976
von der Hardware abhängig isch!
Ja, ist es. wpa_supplicant läuft darüber hinaus nicht mit allen
WPA-fähigen Karten sondern nur einigen davon:
http://hostap.epitest.fi/wpa_supplicant/
Grüße
Andreas Janssen
--
Andreas Janssen [EMAIL PROTECTED]
PGP-Key-ID: 0xDC801674 ICQ #17079270
but through interface. I
think there was a tool like this but I don't remember what it was.
You can use any text editor (e.g. nano, vi, vim, emacs), or run
apt-setup.
best regards
Andreas Janssen
--
Andreas Janssen [EMAIL PROTECTED]
PGP-Key-ID: 0xDC801674 ICQ #17079270
Registered Linux
und was ich dagegen tun kann?
[...]
udev requires a kernel = 2.6.12, upgrade aborted.
[...]
Da steht eigentlich alles wichtige. Du brauchst neben dem Kernel auch
ein aktuelles udev. backports.org hat beides.
Grüße
Andreas Janssen
--
Andreas Janssen [EMAIL PROTECTED]
PGP-Key-ID
/~joey/3.1r2/
2. Fehlen auf den CDs/DVDs grundsätzlich alle Pakete aus non-free und
die meisten aus contrib, sofern diese ohne non-free nicht installierbar
sind.
Grüße
Andreas Janssen
--
Andreas Janssen [EMAIL PROTECTED]
PGP-Key-ID: 0xDC801674 ICQ #17079270
Registered Linux User #267976
eine Bibliothek benutzen soll und Du es kompilierst, dann
musst Du nicht nur die Bibliothek installieren, sondern auch die
Headers aus dem dazugehörigen -dev-Paket, z.B. libgtk1.2-dev für GTK1,
oder libgtk2.0-dev für GTK 2.x.
Grüße
Andreas Janssen
--
Andreas Janssen [EMAIL PROTECTED]
PGP-Key
eine andere Lösung,
nämlich entweder:
- Die Module in gewünschter Reihenfolge in /etc/modules eintragen
- ifrename oder nameif benutzen und den Namen an eine Eigenschaft der
Karte, z.B. MAC-Adresse, koppeln
Grüße
Andreas Janssen
--
Andreas Janssen [EMAIL PROTECTED]
PGP-Key-ID
daran daß niemand eine Antwort parat hat. Du
könntest aber trotzdem mal sagen was lsusb und dmesg nach dem
Einstecken und nach dem Laden des Treibers sagen.
Grüße
Andreas Janssen
--
Andreas Janssen [EMAIL PROTECTED]
PGP-Key-ID: 0xDC801674 ICQ #17079270
Registered Linux User #267976
http
Hello
L.V.Gandhi ([EMAIL PROTECTED]) wrote:
On 2/9/06, Andreas Janssen [EMAIL PROTECTED] wrote:
You can get official debian keys from the debian-archive-keyring
package. Never just download keys from some gpg server just because
someone tells you some key id, only get the keys from
the hotplug package.
best regards
Andreas Janssen
--
Andreas Janssen [EMAIL PROTECTED]
PGP-Key-ID: 0xDC801674 ICQ #17079270
Registered Linux User #267976
http://www.andreas-janssen.de/debian-tipps-sarge.html
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe
.
best regards
Andreas Janssen
--
Andreas Janssen [EMAIL PROTECTED]
PGP-Key-ID: 0xDC801674 ICQ #17079270
Registered Linux User #267976
http://www.andreas-janssen.de/debian-tipps-sarge.html
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact
Hello
L.V.Gandhi ([EMAIL PROTECTED]) wrote:
On 2/9/06, Andreas Janssen [EMAIL PROTECTED] wrote:
The first time you tried to export the key from gpg to apt, but you
didn't have the key in your gpg keyring. The second time, you
imported the key to gpg, but didn't feed it to apt.
Thanks
are removed.
best regards
Andreas Janssen
--
Andreas Janssen [EMAIL PROTECTED]
PGP-Key-ID: 0xDC801674 ICQ #17079270
Registered Linux User #267976
http://www.andreas-janssen.de/debian-tipps-sarge.html
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble
-Medium auf dem sich der Kernel
befindet, oder ein BIOS-Update, falls es für den Rechner noch eines
gibt. Kommt das alles nicht in Frage musst Du auf eine Platte mit
maximal 128/137 Gbyte ausweichen.
Grüße
Andreas Janssen
--
Andreas Janssen [EMAIL PROTECTED]
PGP-Key-ID: 0xDC801674 ICQ
!
libtdb1 debtags adept
Install these packages without verification [y/N]?
Where am I going wrong?
Did you run apt-get update? Also check where the package comes from
(apt-cache policy debtags adept libtdb1).
best regards
Andreas Janssen
--
Andreas Janssen [EMAIL PROTECTED]
PGP-Key
Andreas Janssen
--
Andreas Janssen [EMAIL PROTECTED]
PGP-Key-ID: 0xDC801674 ICQ #17079270
Registered Linux User #267976
http://www.andreas-janssen.de/debian-tipps-sarge.html
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
daemon
(/etc/default/bootlogd) and use `less /var/log/boot` after booting to
find out which service is responsible for the module being loaded.
best regards
Andreas Janssen
--
Andreas Janssen [EMAIL PROTECTED]
PGP-Key-ID: 0xDC801674 ICQ #17079270
Registered Linux User #267976
http
image and bzImage.
The system reports it can't find my root device /dev/sda1 (which is
SATA on ICH7)
Did you reconfigure your bootloader accordingly? Did you tell it where
the initrd is? Btw, if you use kernel-package, this will be done
automatically.
best regards
Andreas Janssen
you already installed it.
lrwxrwxrwx 1 root src19 2006-02-04 12:32 linux -
linux-source-2.6.15
Remove this symlink, and remove /usr/src/linux-source-2.6.15 as well.
Then run module-assistant prepare and m-a auto-install ndiswrapper.
best regards
Andreas Janssen
--
Andreas
.
best regards
Andreas Janssen
--
Andreas Janssen [EMAIL PROTECTED]
PGP-Key-ID: 0xDC801674 ICQ #17079270
Registered Linux User #267976
http://www.andreas-janssen.de/debian-tipps-sarge.html
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL
hotplug and see if udev can do
this.
best regards
Andreas Janssen
--
Andreas Janssen [EMAIL PROTECTED]
PGP-Key-ID: 0xDC801674 ICQ #17079270
Registered Linux User #267976
http://www.andreas-janssen.de/debian-tipps-sarge.html
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject
.
What should I do?
You need to run apt-key, e.g.
apt-key add ziyi_key_2006.asc
Of course this only works /after/ you installed apt from
testing/ustable. You can also install the debian-archive-keyring
package and run `apt-key update`.
best regards
Andreas Janssen
--
Andreas Janssen [EMAIL
Hello
Daniel B. ([EMAIL PROTECTED]) wrote:
Florian Kulzer wrote:
David Kirchner wrote:
On 2/2/06, Andreas Janssen [EMAIL PROTECTED] wrote:
man apt-secure, man apt-key
Neither are found on my Sarge install, and I don't see them in
aptitude.
Probably because you use Sarge, and apt
the file in APT_CONFIG but this env var is not set. I have
found plenty of docs on using apt, but none on configuring it.
Simply create apt.conf, or create your own file in /etc/apt/conf.d.
best regards
Andreas Janssen
--
Andreas Janssen [EMAIL PROTECTED]
PGP-Key-ID: 0xDC801674 ICQ #17079270
and then search for each file
using
apt-file search filename
best regards
Andreas Janssen
--
Andreas Janssen [EMAIL PROTECTED]
PGP-Key-ID: 0xDC801674 ICQ #17079270
Registered Linux User #267976
http://www.andreas-janssen.de/debian-tipps-sarge.html
--
To UNSUBSCRIBE, email to [EMAIL
.
You'll have to wait until 3.5 makes it to testing.
Or use k3b and libk3b2 0.12.10-1 from http://snapshot.debian.net, the
last versions from unstable build for KDE 3.4.
best regards
Andreas Janssen
--
Andreas Janssen [EMAIL PROTECTED]
PGP-Key-ID: 0xDC801674 ICQ #17079270
Registered Linux
apt-secure, but I didn't fin the aswer...
What shall I do to fix this problem?
man apt-secure, man apt-key
Install the 2006 archive signing key. This has been explained plenty of
times on the list, search the archive if you need a longer explanation.
best regards
Andreas Janssen
unstable ziehen kann.
DefaultRelease auf testing setzen, unstable zur sources.list hinzufügen,
gewünschte Pakete entsprechend pinnen. Siehe `man apt_preferences`,
`man apt.conf` und apt-doc. Nützt Dir aber wie gesagt in diesem Fall
nichts.
Grüße
Andreas Janssen
--
Andreas Janssen [EMAIL
software for KDE is not in Testing. Some have or had RC
bugs, and they can't migrate now from unstable because the unstable
packages have already been built for KDE 3.5. KDE itself in testing
should however be OK.
best regards
Andreas Janssen
--
Andreas Janssen [EMAIL PROTECTED]
PGP-Key-ID
vor dem apt-get dselect
upgrade wieder einspielst, bleiben Dir auch die ganzen debconf-Fragen
bei der Neuinstallation erspart.
Grüße
Andreas Janssen
--
Andreas Janssen [EMAIL PROTECTED]
PGP-Key-ID: 0xDC801674 ICQ #17079270
Registered Linux User #267976
http://www.andreas-janssen.de/debian
schau doch mal nach was in Zeile 12 drinsteht.
Grüße
Andreas Janssen
--
Andreas Janssen [EMAIL PROTECTED]
PGP-Key-ID: 0xDC801674 ICQ #17079270
Registered Linux User #267976
http://www.andreas-janssen.de/debian-tipps-sarge.html
--
Haeufig gestellte Fragen und Antworten (FAQ):
http
ungeduldig - das hier ist keine Supporthotline
4. Du musst Deine /etc/network/interfaces reparieren und
dringend mal `man interfaces` lesen.
Grüße
Andreas Janssen
--
Andreas Janssen [EMAIL PROTECTED]
PGP-Key-ID: 0xDC801674 ICQ #17079270
Registered Linux User #267976
http://www.andreas
Janssen
--
Andreas Janssen [EMAIL PROTECTED]
PGP-Key-ID: 0xDC801674 ICQ #17079270
Registered Linux User #267976
http://www.andreas-janssen.de/debian-tipps-sarge.html
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
you import the new key for 2006
already?
best regards
Andreas Janssen
--
Andreas Janssen [EMAIL PROTECTED]
PGP-Key-ID: 0xDC801674 ICQ #17079270
Registered Linux User #267976
http://www.andreas-janssen.de/debian-tipps-sarge.html
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED
in der /etc/network/interfaces funktionieren:
auto eth0
iface eth0 inet dhcp
Du kannst auch etherconf installieren und das benutzen (dpkg-reconfigure
etherconf), um Dein Netzwerk einzustellen.
Grüße
Andreas Janssen
--
Andreas Janssen [EMAIL PROTECTED]
PGP-Key-ID: 0xDC801674 ICQ #17079270
eventuell auch
eine Netzwerkfreigabe (z.B. Web oder FTP, apt-proxy oder apt-cacher) in
Frage. Die kannst Du bei der Installation als Quelle angeben. Pakete
Deiner CDs kannst Du mit geeigneten Werkzeugen (apt-proxy-import bei
apt-proxy) in das Archiv importieren.
Grüße
Andreas Janssen
Hello
H.S. ([EMAIL PROTECTED]) wrote:
Andreas Janssen wrote:
Your only chance is to find old versions on
http://snapshot.debian.net. You need:
^^
k3b and libk3b2 0.12.10-1
amarok and amarok-engines 1.3.7-1
kaffeine and kaffeine-xine 0.7.1-1.3+b1
So
of exactly what to do.
You need:
- a runnig x server on the ssh client
- xbase-clients installed on the ssh server
- X forwarding activated on the ssh server (man sshd_config)
- X forwarding not disabled on the ssh client (man ssh_config, ssh -X)
best regards
Andreas Janssen
--
Andreas
Versionen des Treibers (nämlich 7xxx aus
den Debian-Paketen und 8xxx aus dem Nvidia-Installer) vermischt.
Entferne beide komplette und installier dann einen von beiden neu, am
besten die Debian-Pakete.
Grüße
Andreas Janssen
--
Andreas Janssen [EMAIL PROTECTED]
PGP-Key-ID: 0xDC801674 ICQ
kaffeine and kaffeine-xine 0.7.1-1.3+b1
I don't know about vlc, so you probably will have to do some search on
your own.
best regards
Andreas Janssen
--
Andreas Janssen [EMAIL PROTECTED]
PGP-Key-ID: 0xDC801674 ICQ #17079270
Registered Linux User #267976
http://www.andreas-janssen.de/debian
--set-selections. You can also use pinning to set packages to a
specific version (see man apt_preferences).
best regards
Andreas Janssen
--
Andreas Janssen [EMAIL PROTECTED]
PGP-Key-ID: 0xDC801674 ICQ #17079270
Registered Linux User #267976
http://www.andreas-janssen.de/debian-tipps
use unstable, and the OP wants to use Etch (testing).
best regards
Andreas Janssen
--
Andreas Janssen [EMAIL PROTECTED]
PGP-Key-ID: 0xDC801674 ICQ #17079270
Registered Linux User #267976
http://www.andreas-janssen.de/debian-tipps-sarge.html
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED
setting I've mixed.
Make sure that alsa-oss is installed. Check if your card can allow
several applications (sound server, browser) to access the card at the
same time. If it doesn't, you need to activate the dmix plugin for
software mixing.
best regards
Andreas Janssen
--
Andreas Janssen
-Logs, indem genau steht warum X nicht starten kann. Diese
Informationen musst Du nachliefern. Beim X-Log reichen die
entscheidenden Zeilen am Ende und alles mit (EE), bitte nicht einfach
alles in eine Mail kopieren und abschicken.
Grüße
Andreas Janssen
--
Andreas Janssen [EMAIL PROTECTED
kernels but they fail to configure property my
ethernet connection, this is why I need to stick with this one.
Kernel 2.6.14 is not part of Debian anymore. Install 2.6.15 if you use
unstable.
best regards
Andreas Janssen
--
Andreas Janssen [EMAIL PROTECTED]
PGP-Key-ID: 0xDC801674 ICQ
, and use sudo or
something similar.
best regards
Andreas Janssen
--
Andreas Janssen [EMAIL PROTECTED]
PGP-Key-ID: 0xDC801674 ICQ #17079270
Registered Linux User #267976
http://www.andreas-janssen.de/debian-tipps-sarge.html
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject
Hallo
Ricardo Leese ([EMAIL PROTECTED]) wrote:
On Fri, 20 Jan 2006 20:39:03 +0100, Andreas Janssen
[EMAIL PROTECTED] wrote:
Ich habe also ppp_async und ppp_deflate in /etc/modules eingetragen,
dann wird auch automatisch ppp_generic geladen, connecten will er
immernoch nicht.
ifconfig
, die per iwconfig ausgeführt werden,
daher sollte `man iwconfig` Dir da weiterhelfen.
Grüße
Andreas Janssen
--
Andreas Janssen [EMAIL PROTECTED]
PGP-Key-ID: 0xDC801674 ICQ #17079270
Registered Linux User #267976
http://www.andreas-janssen.de/debian-tipps-sarge.html
--
Haeufig
version of gnome-volume-manager. It seems one or two
people have experienced similar symptoms, but the fixes they used
didn't help me at all.
Can you start X by running `startx` from the command line?
best regards
Andreas Janssen
--
Andreas Janssen [EMAIL PROTECTED]
PGP-Key-ID
to [EMAIL PROTECTED] using the key), I copied the same key
to /root/.ssh/authorized_keys of that same computer and I can't
connect to [EMAIL PROTECTED] using the key.
Are root logins allowed on the server? What does the server's auth.log
say?
best regards
Andreas Janssen
--
Andreas Janssen
Hello
linux china ([EMAIL PROTECTED]) wrote:
I plan to upgrade my perl 5.6 to 5.8, how to query if 5.8 is available
in the mirror site in a command?
apt-cache policy packagename
man apt-cache
best regards
Andreas Janssen
--
Andreas Janssen [EMAIL PROTECTED]
PGP-Key-ID: 0xDC801674
auf Kernel 2.6 wechseln).
Grüße
Andreas Janssen
--
Andreas Janssen [EMAIL PROTECTED]
PGP-Key-ID: 0xDC801674 ICQ #17079270
Registered Linux User #267976
http://www.andreas-janssen.de/debian-tipps-sarge.html
--
Haeufig gestellte Fragen und Antworten (FAQ):
http://www.de.debian.org
1 - 100 of 1925 matches
Mail list logo