Greetings,
I have recently installed a SONY SCSI tape drive onto my linux box. I
would like to use the Taper program to back up my hard drive to tape. But
I seem to be having a problem with getting the tape drive to work.
When I do a cat on /proc/scsi/scsi I get:
Attached
, and probably will not install it,
lack of room. I was wondering if anyone out there has seen and/or developed
either a shell or java driven script that will allow a normal user to
easily add or remove IPFWADM rules via a web interface.
Thank you for your time,
Anthony
Anthony Landreneau
DoD
I have always found tick.usno.navy.mil and tock.usno.navy.mil to be
helpful. For more information check out, www.usno.navy.mil.
Anthony
Does anyone know the ip's of some ntp servers that are on gmt? I'm trying to
get my computer time correctly set to gmt so it will display the correct
time.
ok) and keep it
running under 60 megs?
Anyway have something like this running? Share the info? Would be
appriciated!
Thanks.
Anthony Landreneau
DoD Network Security Administrator
Infinity Data Systems
New Orleans Louisiana
(504)455-8973
Greetings Christian,
I run several Debian boxes doing many things, as well as a few NT
boxes. I
have found that NOCOL (http://www.netplex-tech.com/software/nocol/) does
the job VERY well. Hope this helps...
Anthony
At 09:25 PM 6/5/99 -0500, Christian Dysthe wrote:
Hi,
we have recently
domains.
Thanks,
Anthony Landreneau
DoD Network Security Administrator
Infinity Data Systems
New Orleans Louisiana
(504)455-8973
hopefully this should work for you... see how far it gets you.
regards,
-tl
On Wed, 19 May 1999, Anthony Landreneau wrote:
From: Anthony Landreneau [EMAIL PROTECTED]
To: debian-user@lists.debian.org
Date: Wed, 19 May 1999 12:43:45 -0500
Subject: Sendmail Relay.
Greetings,
I am
messages.
Anyone had luck working with this? I have checked the sendmail site and
the HowTo docs, but I have to tell you it is not making a lot of sense to
me. Your help is appriciated.
Anthony Landreneau
DoD Network Security Administrator
Infinity Data Systems
New Orleans Louisiana
(504)455-8973
to the hard drive. Has
anyone had any luck with this?
Thanks,
Anthony Landreneau
Network Administrator
Infinity Data Systems
New Orleans Louisiana
(504)455-8973
. The message is not sendable until the recipient has been changed.
I am assuming that this is a SPAM feature, but for the life of me I
can't
find the switch that would let me send this stuff out. And insight to this
would be much appreciated.
Anthony Landreneau
Network Administrator
Infinity
Greetings,
Upgraded a few programs on my mailserver, went from inetd to xinetd.
qpopper no longer works. Can't seem to open a socket on port 110.
It is in the inetd.conf file, it is also listed in the xinetd.conf.
Still
not working. Any insight would be appreciated.
Anthony
0x5EE61C37]
--
Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED]
/dev/null
Anthony Landreneau
Network Administrator
Infinity Data Systems
New Orleans Louisiana
(504)455-8973
on these
machines then boot the machines up with LINUX.
What do I set the BIOS to in order to correctly partition the drives
with
Linux? Thanks in advance.
Anthony Landreneau
Network Administrator
Infinity Data Systems
New Orleans Louisiana
(504)455-8973
up?
Thanks,
Anthony Landreneau
Network Administrator
Infinity Data Systems
New Orleans Louisiana
(504)455-8973
-a accept -b -P tcp -S 111.229.13.0/24 21 -D 0.0.0.0/0 1024:65535
# Allow Telnet connections to outside Servers
ipfwadm -F -a accept -b -P tcp -S 111.229.13.0/24 23 -D 0.0.0.0/0 1024:65535
# Allow NTP time to NS1
ipfwadm -F -a accept -b -P tcp -S 111.229.13.2 123 -D 0.0.0.0/0 1024:65535
Anthony
Thanks so much for your insight,
What I did was go to Western Digital's site and downloaded their disk
diag. Ran it, safely low leveled the drive, installed Debian, life is good.
The disk is healthy to come to find out, one of the advantages of using
that software.
Again thanks for
Greetings,
Have an old machine I am looking to load up with Debian, problem is the
original DOS drive had Ontrack's Dymanic Drive Overlay installed on it. I
do not have the original Ontrack disk. Tried re-partioning the disk with
Linux's fdisk, no luck, the evil overlay continues. Your
Greetings,
I have a machine that I would like to institue RAID1 on. Two 4 Gig
drives,
the primary is partitioned with a
/dev/hda1 /
/dev/hda2 swap
/dev/hda3 /var
/dev/hda4 /usr
I have the secondary drive partitioned the same way. I would like to mirror
the
Ok Kenneth,
I must be missing something here, other than my mind of course. This is
the requirment:
I have a tape with a tar file on it, lets call it thefile.tar . I need to
make two copies of that file, back on two other tapes. So I will have
three tapes with three identical copies of this
Greetings,
Got what I thought was a simple problem. I have a 2GB DAT tape drive, a
directory that I want to backup to that tape drive. Seems simple enough,
but I can't seem to get it to work. I thought the command was:
tar -cvf thetarfile.tar /usr/thedirectory
But it isn't working. Now
Ok, still having a problem. Let me do some more explaining. This was a TAR
file from another machine, I needed to make a copy of the tar file in order
to distribute the data. THe file was tar'ed with a user and group ID that
doesn't exsist on my system. So I am getting these errors:
# tar -cvf
Greetings,
Trying to automate work done by some WIN95/NT people who don't
understand
upper/lower case. I have a directory of files that are upper case and need
to be brought to lower case. Does anyones have a program or script that
could help me do about 400 files?
Thanks,
Anthony
Thanks guys, got the job done. I love ths little script, fits well in my
/usr/bin too!
Tell you, you don't get help like this from Microsoft!
Thanks again,
Anthony Landrenea
Infinity Data Systems
I think this is from some HOWTO but I forget which one:
[EMAIL PROTECTED] bin]$less up2lo
system and ran named-bootconf and it created the named.conf file.
One thing I have noticed is two files have been altered. Both gzip and
gunzip were at 0 bytes. Not sure if this has anything to do with it. And
input on this matter would be appreciated.
Anthony Landreneau
Infinity Data Systems
and boot.zone
files. Just can't figure it out. Thanks again,
Anthony Landreneau
Infinity Data Systems
Network Engineer
Try running bindconfig instead.
Peter
-Original Message-
From: Anthony Landreneau [EMAIL PROTECTED]
To: debian-user@lists.debian.org debian-user@lists.debian.org
Date
it from here? I
have tried to dpkg the packages one at a time but get a core dump. Would
really not like to reinstall the system. Your help would be appracited.
Anthony Landreneau
[EMAIL PROTECTED]
Global symbol NetConfig requires explicit package name at
/usr/lib/perl5/Net/.
Variable %NetConfig
to run
Debian on the HP.
The questions, has anyone attempted to install Debian on an HP? Did
it work? Will it work?
Thanks for any input,
Anthony Landreneau
Greetings,
Does anyone know of a V.35 serial card that has LINUX (Debian) drivers?
Looking to hook a T1 directly into a LINUX box and the CSU/DSU has a V.35
output.
Anthony
Greetings,
I am in the process of installing the IP firewall tool kit. One of the
things I can't seem to figure out is how the enable return replies. It
seems like it would be pretty obvious, but I can't seem to find a reference
in the info pages.
Also, how about an SQL*NET
, suggestions or comments are welcome in this matter.
Anthony Landreneau
Network Engineer
Infinity Data System
[EMAIL PROTECTED]
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
Greetings,
I am looking to use several debian systems as routers for a small
network
that I am building. What I need is a card that will give me a V.35
interface that will allow me to plug into my RAD modems. If anyone out
there is using such a card, or can recommend a card I would be
Greetings,
I was wondering if anyone has the drivers or knows where I might find
the
source for the drivers regarding a Supra NetCommander ISDN card. Supra has
stated that they do not support the card in anything but an win95 or NT
platform. Any help would be much appreciated.
Anthony
Greetings,
I have two Debian boxes that sit on my Network. The network is host to
about 100 domains. Along with acting as the DNS for the network, the two
boxes also act as MX relay for all of the domains. The problem is someone
out there found my boxes and used them to dump spam.
My root partition, of 400 megs is full. The partition /usr and that of
/var are all on their own partition. I have looked in every directory for
a core file, and have scanned for viruses. There is no reason that the
root partition should be filled to capacity and I can't seem to find the
Greetings all you helpful folks,
Been ruuning an apache Web Server on a Debian box for about 6 months.
Now
I need to password protect the whole directory tree of web pages. Tried to
use the .htaccess type of protection but can't seem to get it to work.
Anyone out there have any
Greetings,
While doing some software upgrades to my debian box I lost the POP3
ability. Tried to reinstall smail, nothing, sendmail, nothing. Eudora
will connect to the box, but as it starts to log in it will just hang.
Any ideas on what could have happened and were I could look
Greetings,
I would like to put multible IP addresses to a single Network interface
on
one of my Debian boxes. I have found information on how to do it, but
can't seem to get it to work. Wondering what it is that I am missing.
Looking for some to help out who has this feature working,
Greetings,
I have a few IP based CD towers that I am mounting to a debian box.
The mount is going fine, however the sub-directories that the mounts are
listing are only available to root. I need to make these sub-directories
exportable to another nfs mount, so I need to make the owner
38 matches
Mail list logo