Thank you for your mail.
On Wed, Mar 27, 2024 at 12:42 AM Andy Smith wrote:
> On Tue, Mar 26, 2024 at 06:33:42PM +0100, Steffen Dettmer wrote:
> > I changed a gateway on a remote site using /etc/network/interfaces by
> > changing gateway. However, at reboot some old gateway IP
Thank you for your quick reply.
On Wed, Mar 27, 2024 at 12:22 AM Henning Follmann
wrote:
> On Tue, Mar 26, 2024 at 06:33:42PM +0100, Steffen Dettmer wrote:
> > I changed a gateway on a remote site using /etc/network/interfaces by
> > changing gateway. However, at reboot some
On Tue, Mar 26, 2024 at 11:27 PM Dustin Jenkins wrote:
> On my Debian 12 system, the connman service was helping itself to interfaces,
> including my bridge interfaces that I wanted left alone. Maybe try disabling
> or removing it?
>
> sudo systemctl stop connman
> sudo systemctl disable
Thank your for your quick and detailed reply.
On Tue, Mar 26, 2024 at 7:01 PM Greg Wooledge wrote:
> On Tue, Mar 26, 2024 at 06:33:42PM +0100, Steffen Dettmer wrote:
> > I changed a gateway on a remote site using /etc/network/interfaces by
> > changing gateway. However, at
On Tue, Mar 26, 2024 at 7:18 PM Pierre-Elliott Bécue wrote:
> As it's a PVE kernel I guess you rely on Proxmox.
> *Theoretically*, Proxmox VE uses /etc/network/interfaces.new to apply
THIS! (OMG why didn't I see this! Thank you!!)
ohh thanks so much for your quick reply, my "machine" indeed is
Hi,
I changed a gateway on a remote site using /etc/network/interfaces by
changing gateway. However, at reboot some old gateway IP reappears. I
really hate when some magic knows better than an explicitly set value.
What happens here? How can I get rid of this? It is 100% reproducible.
I have no
Hi,
thanks for your reply.
On Tue, Oct 22, 2019 at 5:45 AM Peter Wiersig wrote:
> Steffen Dettmer writes:
> > So you propose not to use init.d scripts. I usually prefer a simple shell
> > script that is easy to test, systemd is just way to complex.
>
> Like Gre
On Mon, Oct 21, 2019 at 9:32 PM Greg Wooledge wrote:
> On Mon, Oct 21, 2019 at 09:26:57PM +0200, Steffen Dettmer wrote:
> > On Mon, Oct 21, 2019 at 3:27 PM Greg Wooledge
> wrote:
> > > This is not correct. Debian's systemd will use init.d scripts in
> > > c
Hi,
thanks for your reply.
On Mon, Oct 21, 2019 at 3:27 PM Greg Wooledge wrote:
> > But probably
> > for Debian you are right, if I understood correctly, newer versions do
> not
> > even support init.d / LSB anymore, so using systemd units seems to be
> > required there.
>
> This is not
Hi,
thanks for your reply.
On Sun, Oct 20, 2019 at 10:26 PM Peter Wiersig
wrote:
> 5.)
> Instead of init.d scripts create systemd units.
> https://wiki.debian.org/systemd#Creating_or_altering_services
https://freedesktop.org/wiki/Software/systemd/
So you propose not to use init.d scripts. I
Hi,
thank you for your reply.
On Fri, Oct 18, 2019 at 3:34 PM Jonas Smedegaard wrote:
> Quoting Steffen Dettmer (2019-10-18 15:17:10)
> > in short: how to use "init.d" scripts on Debian?
>
> In short:
>
> service $SERVICE stop
>
Thanks for the tip. man i
Hi,
in short: how to use "init.d" scripts on Debian?
in detail:
On one server a init.d script with LSB header does not work, at least when
started by command line. I traced down the following:
#1 init.d/script sources /lib/lsb/init-functions
#2 /lib/lsb/init-functions has support for hooks:
Hi,
thanks for your quick reply.
I see, multiboot with different /etc but shared /usr or /local could invite
a lot of trouble if using different UIDs, indeed! Thanks for the quick
explanation.
> (Apparently man used uid 13 in Debian 8 / Jessi but 6 in Debian 9 /
> > Stretch).
>
> AFAICS, user
.
Steffen
On Fri, Aug 16, 2019 at 11:19 PM Roberto C. Sánchez
wrote:
> On Fri, Aug 16, 2019 at 11:15:32PM +0200, Steffen Dettmer wrote:
> >Hi,
> >is the "Debian Wiki" at [1]https://wiki.debian.org/ "official"? If
> so, I
> >hope her
Hi,
just for my curiosity I wonder why the numeric UID values matter at all,
for example:
update-passwd has found a difference between your system
accounts and the current Debian defaults. It is advisable to
allow update-passwd to change your system; without those
changes some packages
Hi,
is the "Debian Wiki" at https://wiki.debian.org/ "official"? If so, I hope
here is the right place to ask. The wiki at e.g. https://wiki.debian.org/LSB
tells "Currently all major distributions comply with the LSB" and
https://wiki.debian.org/DebianLsb tells "Debian strives to follow and
Hi,
On Sun, Aug 20, 2017 at 8:09 PM, Sven Hartge wrote:
>> How to configure static IP? network/interfaces as in [1] seem not to
>> work because of a "connmand".
>
> connmand? The package "connman" is not contained in the default
> installation of Debian.
Thank you for your
On Sun, Aug 20, 2017 at 8:09 PM, Sven Hartge wrote:
>> How to configure static IP? network/interfaces as in [1] seem not to
>> work because of a "connmand".
>
> connmand? The package "connman" is not contained in the default
> installation of Debian.
>
>> What is "connmand",
Hi,
in short:
How to configure static IP? network/interfaces as in [1] seem not to
work because of a "connmand".
in detail:
I had a failure of my DHCP server and was unable to connect to my
statically configured Debian 8 server. Or at least I intended to
configure static IP. The setup is very
On Tue, Jan 10, 2017 at 12:51 PM, Dominique Dumont <d...@debian.org> wrote:
> On Monday, 9 January 2017 22:49:02 CET Steffen Dettmer wrote:
>> I'm looking at Jessie (Debian 8) man fsck. I found no refernce
>> to systemd. I think this is some compatiblity feature of systemd.
&
On Tue, Jan 10, 2017 at 1:01 AM, Michael Biebl wrote:
>>> I'd rather keep it as simple as possible
>>
>> you can still use sysvinit as init
I read that trying to use sysvinit causes trouble and several things
depend on systemd at the moment.
> The shell scripts used by
On Sun, Jan 8, 2017 at 7:45 PM, Joe wrote:
>> What happened before:
>> I had issue with a Debian server SATA bus [1]. I noticed because
>> apt-get upgrade hung, because initramfs updater calls "sync" which
>> hang because of [1]. All operations accessing a certain (backup)
Hi,
thank you for your quick reply.
On Mon, Jan 9, 2017 at 1:38 AM, David Wright <deb...@lionunicorn.co.uk> wrote:
> On Sun 08 Jan 2017 at 15:56:36 (+0100), Steffen Dettmer wrote:
>> apparently is ignored and "1" is assumed instead, BUT systemd does not
>>
rtant bugs? Probably not, because the issues seem to be known
already?
Steffen
On Sun, Jan 8, 2017 at 2:56 PM, Steffen Dettmer
<steffen.dett...@gmail.com> wrote:
> Hi,
>
> I think I found some more information.
>
> In short:
> "Failed at step exec spawning /bin
Hi,
I think I found some more information.
In short:
"Failed at step exec spawning /bin/plymouth: no such file or directory"
but I have no clue why it is suddenly missing or suddenly required.
I found postings in the internet that simply installing plymouth seems
not to solve this issue.
What
Hi,
What happened before:
I had issue with a Debian server SATA bus [1]. I noticed because
apt-get upgrade hung, because initramfs updater calls "sync" which
hang because of [1]. All operations accessing a certain (backup) disk
blocked. Shutdown over network. It was reported server power LED
Hi,
thanks for your mail!
On Thu, Jun 5, 2014 at 5:03 PM, Curt cu...@free.fr wrote:
On 2014-06-05, Steffen Dettmer steffen.dett...@gmail.com wrote:
Do you - or anyone else - know the ip replacement for brctl show?
ip link show br1 is too brief, no information about the slave
devices or STP
Hi all,
thanks for all your answers!
I think I found the solution:
all bridge parameters must go into the first iface stanza.
Subsequent stanzas configure IPs and/or DHCP.
Using allow-hotplug instead of auto, the bridge is not bought up
at boot and can be started asynchrously by some script.
when using VLAN).
On Wed, Jun 4, 2014 at 11:59 PM, Tom H tomh0...@gmail.com wrote:
On Wed, Jun 4, 2014 at 2:00 PM, Steffen Dettmer:
Of course everything works as expected when configuring manually
with ip, brctl etc.
(By the way, you don't need brctl; ip link can create bridges.)
Ohh, I see
Hi,
how to configure a bridge with multiple static IPs and/or DHPC
via /etc/network/interfaces?
I tried many combinations, but I didn't find any working one.
Of course everything works as expected when configuring manually
with ip, brctl etc.
Any working example would be great!
The rest of
Hi,
this is a reply to an very old posting just to tell the solution
to the mailing list archives.
Problem was that Micrel Driver does net set DRIVER name. Here a patch.
On Tue, Nov 26, 2013, Steffen Dettmer steffen.dett...@gmail.com wrote:
On Tue, Nov 19, 2013, Pascal Hambourg pas
Hi,
I have a device with several internal mini PCIe card slots usable
for PCI Express mini modem cards (UMTS, LTE...). These cards
normally are USB cards and get some ethX device name assigned by
Linux, which I don't like. Instead, they should get another name,
for example usb-ethX.
Is it
Hi,
after upgrading to Debian 7.5 (linux-headers-3.2.0-4-common),
backports 3.10.2 [1] does not compile anymore [2]. Without it, I have
issues with Antheros WLAN cards.
Does Debian 7.5 include another backported versions? Can it be removed
and replaced by official backports 3.10.2 from [1]?
It
, Steffen Dettmer a écrit :
$ dpkg -i first.dep second.dep
pre-dependency problem:
nd-second pre-depends on nd-first
nd-first is unpacked, but has never been configured.
dpkg is smart enough to figure out the order in which
packages need to be configured.
Isn't it a bug
Hi,
I have two packages, first and second. Package second depend on
package first. I have to use dpkg (I don't use apt, because there is
no package server / no online link etc).
When I run
$ dpkg -i first.dep second.dep
I get the error:
dpkg: regarding .../nd-second_5.0.02_i386.deb containing
Hi,
two (or more) *.deb packages now become one. All files that were in
any of the packages now are in one and the same, which supersedes them
all.
I dont think it is the best idea to call some dpkg -r oldpackage
from the postinst script of the only remaining package.
How to do this right?
On Thu, Mar 27, 2014 at 6:03 PM, steffen.dett...@gmail.com wrote:
I dont think it is the best idea to call some dpkg -r oldpackage
from the postinst script of the only remaining package.
ps: I tried
Replaces: oldpackage
Conflicts: oldpackage
in control file, but the old package remains
Hi,
logrotate seems to execute postrotate scripts using /bin/sh and I
found no way where to specify which script interpreter to use.
Starting with a she-bang line seem to have no effect. Even if I
manually run logrotate as root who has /bin/bash as login shell,
/bin/sh is used.
How to make
Hi,
sorry, unfortunately I missed your mail, thank you for your
response and sorry for the delay.
On Tue, Nov 19, 2013 at 11:24 PM, Pascal Hambourg
pas...@plouf.fr.eu.org wrote:
Hello,
Steffen Dettmer a écrit :
On Thu, Nov 14, 2013 at 4:36 PM, Steffen Dettmer
steffen.dett...@gmail.com wrote
Hi,
I have persistent-net.rules in form:
SUBSYSTEM==net, KERNEL==eth* ACTION==add,
ATTR{address}==40:d8:55:09:43:0f, NAME=eth3
which makes the Ethernet device with the given MAC address known
as eth3, so far so good.
When trying to add a VLAN using e.g.:
ip link add link eth3 name eth3.77
On Thu, Nov 14, 2013 at 4:36 PM, Steffen Dettmer
steffen.dett...@gmail.com wrote:
I have persistent-net.rules in form:
SUBSYSTEM==net, KERNEL==eth* ACTION==add,
ATTR{address}==40:d8:55:09:43:0f, NAME=eth3
How to use fixed ethX device names and VLAN devices at the same time?
I found
Hi,
thanks for your detailed answer.
On Tue, Nov 12, 2013 at 6:02 PM, David F deb...@meta-dynamic.com wrote:
On 11/12/2013 07:35 AM, Steffen Dettmer wrote:
Debian 7.2 with /bin/bash as login shell (via /etc/passwd), shopt
huponexit off (as by default), bash run via SSH from other host
Hi,
Debian 7.2 with /bin/bash as login shell (via /etc/passwd), shopt
huponexit off (as by default), bash run via SSH from other host.
When closing shell with CTRL-D, sleep continues to run. I had
expected I had to use nohup, setsid, disown or a combination of them
in order to keep background
Hi,
we have USB network cards and udev rules for them, for example:
SUBSYSTEM==net, ACTION==add, ATTRS{manufacturer}==Novatel
Wireless*, ATTRS{serial}==?*, NAME=ethnovatel%n
when booting, we see e.g., ethnovatel3 and ethnovatel4, as expected.
When unplugging/replugging (or power cycling) the
Hi,
thanks for your quick and helpful reply!
On Thu, Oct 17, 2013 at 11:09 PM, Bob Proulx b...@proulx.com wrote:
Steffen Dettmer wrote:
Your indention is terrible!
Sorry, I'll improve.
I think I have to pass the option -nw to dhclient, but how do I do
that correctly?
If you want dhclient
On Fri, Oct 18, 2013 at 9:40 AM, Tom H tomh0...@gmail.com wrote:
On Thu, Oct 17, 2013 at 12:57 PM, Steffen Dettmer
steffen.dett...@gmail.com wrote:
but I get an error message that ifup tries to configure the VLAN
interface twice, but the addresses are set.
I assume that you mean auto eth3.77
Hi!
On Thu, Oct 17, 2013 at 11:39 PM, Bob Proulx b...@proulx.com wrote:
Steffen Dettmer wrote:
However all of the docs I see just now suggest using a bridge.
There are docs recommending to take the burden of kernel software
briding to add an alias IP?!
Configuring multiple IP addresses
On Fri, Oct 18, 2013 at 9:53 AM, Tom H tomh0...@gmail.com wrote:
auto eth0
iface eth0 inet static
address 10.0.5.16
netmask 255.255.255.0
iface eth0.77 inet manual
auto br0.77
iface br0.77 inet manual
bridge_ports eth0.77
bridge_fd 0
Hi,
thanks again for your fast help.
On Fri, Oct 18, 2013 at 1:18 PM, Tom H tomh0...@gmail.com wrote:
So Bob must be right about your ifupdown version not using iproute
I'm using Wheezy with ifup version 0.7.8, I think this is the
latest officially released (aka the best) one?
and, as he
also is wrong. For hotplug-interfaces it could be a very
old PID in the file and the number could have been reused by another
process (isn't it a bit unexpected to find such things in base
services like ifup that are supposed to be rock-solid?).
Steffen
On Fri, Oct 18, 2013 at 2:05 PM, Steffen
Hi!
On Fri, Oct 18, 2013 at 3:24 PM, Tom H tomh0...@gmail.com wrote:
I'm using Wheezy with ifup version 0.7.8, I think this is the
latest officially released (aka the best) one?
Strange. I was under the impression that Debian 7's ifupdown is using
iproute but you had a vconfig error in an
On Fri, Oct 18, 2013 at 3:24 PM, Tom H tomh0...@gmail.com wrote:
---8===
auto lo
iface lo inet loopback
allow-auto eth0.9
iface eth0.9 inet static
address 192.168.1.119
netmask 255.255.255.0
gateway 192.168.1.1
Hi,
I'd like to configure multiple IP addresses to a VLAN tagged interface. I tried
auto eth3.107
iface eth3.77 inet static
address 10.0.5.15
netmask 255.255.255.0
iface eth3.77 inet static
address 10.0.5.16
netmask 255.255.255.0
but I get an error message that ifup tries to
Hi,
I configured several interfaces using ifupdown using DHCP by stanzas like:
auto eth2
iface eth2 inet dhcp
When booting and one of the DHCP interfaces has no cable attached,
booting is delayed about around 60 seconds (seems to be value of
dhclient.conf:timeout). I think I have to pass the
54 matches
Mail list logo