piste, avec
d'éventuelles multiples transcodages au passage).
Mais, vu les retours des autres, pas certain de toute façon que la cause racine
soit à chercher côté logiciel dans ton cas...
l0f4r0
t
* dd if=./your_file.ext | clamscan -
l0f4r0
rite to ClamAV dedicated mailing list directly
(clamav-us...@lists.clamav.net). It's free as well and you can subscribe
through https://lists.clamav.net/mailman/listinfo/clamav-users
l0f4r0
.io/) and loves it.
>
In that case, there is cherrytree as well.
l0f4r0
Hello,
8 juin 2023, 19:23 de koh...@oceanetpro.net:
> comment chercher ?
>
usbguard est-il installé ?
Que donne journalctl ?
l0f4r0
Hello,
1 juin 2023, 12:46 de benoit...@protonmail.ch:
> % > sed -rz '{s/-\n//g;s/\n//g}' format.txt
>
> Mais je ne suis pas satisfait du résultat parce que je voudrais ignorer les
> points (.\n) suivit d'un retour à la ligne.
>
sed ':a;N;$!ba;s/-\n//g' format.txt
l0f4r0
Hello,
14 avr. 2023, 00:02 de jenapierregirau...@free.fr:
> Pour se désinscrire d'une liste, le message ne doit pas être envoyé à
> l'adresse de la liste elle-même mais à
> -requ...@lists.debian.org
> avec le mot « unsbscribe » en objet.
>
"unsubscribe" ;)
l0f4r0
org/fr/DebianReleases
l0f4r0
text-wrap-with-diff-y
l0f4r0
option/switch.
How do you get that URL? Via your browser resource/code inspector?
l0f4r0
pect, it's because to access video on that FamilySearch
> page, one is required to be logged in. IDK whether yt-dlp can handle
> that.
>
Interesting theory but I can play that specific video in my browser without
being logged in ;)
l0f4r0
generic extractor (documentation says
"Generic downloader that works on some sites") but it doesn't work for
familysearch.org visibly...
As mentioned by David, you should try the following command to see (hopefully)
that your yt-dlp works just fine:
yt-dlp http://www.youtube.com/watch?v=bKzonnwoR2I
l0f4r0
Bonsoir,
28 févr. 2023, 19:56 de fzul...@gmail.com:
> une solution alternative ?
>
magic-wormhole
l0f4r0
drestart/issues/249
You may feed the tickets with your case.
l0f4r0
Bonjour,
16 janv. 2023, 20:05 de awache...@gmail.com:
> J'ai toujours ces messages répétitifs au boot :
> "Begin Running /scripts/local-block done"
> que je n'ai pas avec les 2 autres ordinateurs.
> Quid ?
>
Que donne la lecture des liens précédemment transmis ?
l0f4r0
ge-running-scripts-local-block-on-boot/
https://askubuntu.com/questions/1013927/begin-running-scripts-local-block-done-stuck-in-initramfs-on-ubuntu-17
Bon dimanche
l0f4r0
15 oct. 2022, 15:25 de b...@taranig.net:
> Le 2022-10-15 09:33, l0f...@tuta.io a écrit :
>
>> Pour ceux qui ont des soucis, que donne :
>>
>> utmpdump /run/utmp
>>
>> ?
>>
>> l0f4r0
>>
> Utmp dump of /run/utmp
> [8] [00233] [si
Pour ceux qui ont des soucis, que donne :
utmpdump /run/utmp
?
l0f4r0
Bernard et Nicolas,
Que donne la commande suivante :
$ apt policy coreutils
l0f4r0
vante ?
locale | grep LC_TIME
l0f4r0
Hi,
19 août 2022, 14:08 de cu...@free.fr:
> curl cheat.sh/:list
>
> Or am I missing something once again, I wonder vaguely.
>
`curl cht.sh/...` is quicker to type ;)
l0f4r0
ble cheatsheets
>
> Is there a file of cheatsheets to download?
>
As you said you installed cheat, then you can type:
cht.sh :list
Without client, you need to use:
curl cht.sh/:list <http://cht.sh/:list>
l0f4r0
eb > http://deb.debian.org/debian-security/> testing-security main contrib
> non-free
>
Je ne tourne pas sous testing mais à mon sens il manque le dépôt principal
suivant :
deb http://deb.debian.org/debian/ testing main contrib non-free
l0f4r0
Bonjour,
Quel est le contenu de votre fichier /etc/apt/sources.list ?
Avez-vous des fichiers dans /etc/apt/preferences.d ? Si oui, quel est leur
contenu également ?
Et enfin que donne la commande suivante ?
apt policy okular
l0f4r0
s.io/en/stable/#>) et j'en suis satisfait.
L'outil permet le chiffrement et la déduplication notamment.
Bonne journée,
l0f4r0
/sources.list.d/
Bonne journée,l0f4r0
.. (have
> they been renamed prior/next? BTW)
>
If you want to scroll inside the inner tmux, you should use your prefix twice I
think.
So, in your case: C-b C-b PageUP/DOWN
Best regards,
l0f4r0
No containers need to be restarted.
No user sessions are running outdated binaries.
Best regards,
l0f4r0
(for PulseAudio for example).
I had the same problem some time ago with only Firefox not getting me any sound.
In pavucontrol, "playback" tab, Firefox was on "mute" indeed while playing.
No more issue with it since I've changed its configuration.
HIH
l0f4r0
Bonjour,
16 déc. 2021, 12:10 de benoit...@protonmail.ch:
> Je recherche un logiciel pour couper et rabouter des vidéos.
> En paquet Debian, facile à utiliser et si possible en ligne de commande.
>
=> ffmpeg
l0f4r0
your modified /etc/fstab
file?
systemctl daemon-reload
Sources:
*
https://unix.stackexchange.com/questions/477794/how-to-force-os-reload-of-fstab/577321
*
https://www.systutorials.com/how-to-force-systemd-to-refresh-or-reloaded-a-changed-fstab-on-linux/
* https://www.suse.com/support/kb/doc/?id=18576
l0f4r0
y'a un
> "releaseinfo-change" et tant que cette commande n'est pas tapée, les mises a
> jour de sécurité ne se font pas.
>
L'élément de configuration suivant ne peut-il pas aider ?
Acquire::AllowReleaseInfoChange::Suite "true";
l0f4r0
Thank you & Best regards,
l0f4r0
years LTS support after that.
>
Best regards,
l0f4r0
the aforementioned `--mkpath` switch by the way.
The moral is: Pay attention to the single one character you type on the command
line!
Best regards,
l0f4r0
regarding sudo package:
https://bugs.debian.org/cgi-bin/pkgreport.cgi?package=sudo=yes
Best regards,
l0f4r0
ot; header on the web page:
>
> Done: Marc Haber <> mh+debian-packa...@zugschlus.de> >
>
Well spotted Thomas!
It makes sense indeed with the email address used to
close a bug.
Thanks & have a great week-end!
l0f4r0
an email notification for that (I'm the submitter) but it's written nowhere in
the webpage itself (at least I can't find it...).
[1] : https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=958402
l0f4r0
quot;my" and "dest" don't exist yet):
rsync -a src/ dest => "dest" is created
rsync -a src/ my/dest => error, "my" and "dest" don't exist (and are not
created then)
rsync --mkpath -a src/ my/dest => "my" and "dest" are created
l0f4r0
c -a mysite/doc_root mysite_test/doc_root => you will get an extra
"doc_root" folder (the source one) in your dest, i.e. :
mysite_test/doc_root/doc_root and then the content of doc_root source
rsync -a mysite/doc_root/ mysite_test/doc_root => your doc_root (destination)
folder will get doc_root content (source) directly
Best regards,
l0f4r0
t le "*" final qui est important dans la phrase (par exemple
si tu fais tourner aujourd'hui libclamav.so.7 alors il y a certainement un
problème...).
Maintenant tu utilises Debian qui fournit des *paquets* déjà tout prêts et
cohérents donc commencer à jouer avec les librairies me parait périlleux...
l0f4r0
he first character of each
line indicates the current state of the package: the most common states are p,
meaning that no trace of the package exists on the system, c, meaning that the
package was deleted but its configuration files remain on the system, i,
meaning that the package is installed, and v, meaning that the package is
virtual."
Best regards,
l0f4r0
o you see some specific ones or is it the "whole set" that has charmed you?
Thank you in advance & have a great sunday :)
l0f4r0
nt if //'
> useless-use-of-grep > /dev/null; done
>
> real 0m23.624s
> user 0m14.308s
> sys 0m10.826s
>
I'm not in front of my Linux terminal, can someone launch the `time` command
for my `sed` above please ? :)
Best regards,
l0f4r0
qui relève vraiment d'un
compte-à-rebours
Bonne journée,
l0f4r0
Hi,
13 juin 2021, 17:51 de cu...@free.fr:
> On 2021-06-13, Emanuel Berg wrote:
>
>> l0f4r0 wrote:
>>
>>> Removing usbguard is maybe a drastic decision, isn't?
>>> Or maybe you don't want this package anymore for
>>> other reasons?
>>>
>
sudo usbguard append-rule 'allow id : serial "" name "" hash
"" parent-hash "" with-interface XX:XX:XX'
sudo usbguard list-devices
will tell you the correct parameters (of course usbguard must be running and
your device connected/blocked).
Best regards,
l0f4r0
Stella,
Cannot remember if you have Gnome installed but you should have a look at
https://unix.stackexchange.com/a/594287, especially ALL the associated comments
(click on "Show 7 more comments").
HTH
l0f4r0
1.8.4.3
> amd64Python 3 interface to libapt-pkg
> ii synaptic 0.84.6
> amd64Graphical package manager
> ii task-laptop 3.53
> all laptop
>
Nothing shocking here...
What about the following commands?
cat /etc/anacrontab
systemctl list-timers
Best regards,
l0f4r0
At least I am, so you can omit
>> my email address in each of your answers (I'm currently receiving all your
>> emails twice) ;)
>>
>
> I apologize if I have caused inconvenience to you and shall remember to
> remove your email address when I reply to yours.
>
No worries...
Best regards,
l0f4r0
gets/applets for your favorite desktop environment (I can't help you, I
don't use any...)
NB: If not explicitely mentioned by a debian-user poster, most of the time
(s)he is a subscriber of this mailing-list. At least I am, so you can omit my
email address in each of your answers (I'm currently receiving all your emails
twice) ;)
Best regards,
l0f4r0
base sur de vieilles infos, xnview n'est même pas
opensource ;)
https://newsgroup.xnview.com/viewtopic.php?t=5856
https://newsgroup.xnview.com/viewtopic.php?t=5932
Bon week-end !
l0f4r0
nattended-upgrades. So you would have to dig somewhere
else...
l0f4r0
s?
>>
> After rebooting, I have no opportunity to observe the same behavior since my
> posts because there are no software/security updates that are relevant to my
> Debian system at the time of writing this email. Based on my past experience,
> Debian only downloads software/security updates for my kernel and the
> installed packages. The installed packages on my system are minimal. I'll
> have to wait patiently for the next software/security updates for my
> installed packages.
>
Ok, let's wait and see then.
You can remove the package "unattended-upgrades" if you want via `sudo apt
remove` or `sudo apt purge`.
Best regards,
l0f4r0
seems unattended-upgrades is still installed.
You confirm that you never ran something like the following?
sudo apt remove unattended-upgrades
sudo apt purge unattended-upgrades
What give you the next commands please?
apt-config dump | grep -i unatt
apt-config dump | grep -i APT::Periodic
NB: Have you rebooted and observed the same behavior since your posts?
Best regards,
l0f4r0
Hi,
Can you type the following commands in a terminal and give us the results
please (use `sudo` if necessary)?
ls -al /etc/apt/apt.conf.d/
dpkg -l | grep -i unattended-upgrades
cat /lib/systemd/system/apt-daily.timer
cat /etc/systemd/system/apt-daily.timer.d/override.conf
Best regards,
l0f4r0
* Cadenas : bien mais pas suffisant
* Pas de cadenas ou barré etc. = méfiance, surtout pour un site qui demande une
authentification
Bonne journée
l0f4r0
Hi,
5 mai 2021, 04:48 de deb...@lionunicorn.co.uk:
> After all, it's easy to override it with
>
> # ln -s /dev/null /etc/systemd/system/btrbk.service
>
You may need the `-f` (force) switch if btrbk.service file already exists.
Best regards,
l0f4r0
mail indeed...
Well done & thanks ;)
l0f4r0
>
Understood but why `tee` and not a simple redirection to a file (see below)?
>> I'm asking because you suggest `2>&1 | tee /var/tmp/my-job-output` and not
>> `&> /var/tmp/my-job-output`...
>>
> Your syntax makes no sense. You proposed this?
>
> /my/job & /var/tmp/my-job-output
>
Absolutely not, you missed my redirection ;)
My suggestion was the following:
/my/job &>/var/tmp/my-job-output
Best regards,
l0f4r0
the OP expect the output to be automatically displayed please
(I'm not speaking about the file of course)?
I'm asking because you suggest `2>&1 | tee /var/tmp/my-job-output` and not `&>
/var/tmp/my-job-output`...
Best regards,
l0f4r0
ation are:
* amdgpu (kernel) plus amdgpu (DDX) or modesetting (DIX) for current and
non-ancient AMD APUs/GPUs/IGPs
* radeon (kernel) plus modesetting (DIX) or radeon (DDX) for ancient AMD/ATI
GPUs/IGPs
* gma500 (kernel) or i915 (kernel) plus intel (DDX) or modesetting (DIX) for
Intel GPUs/IGPs
* nouveau (kernel) plus modesetting (DIX) or nouveau (DDX) for NVidia GPUs
Best regards,
l0f4r0
5.dd-ptcl-img.zst
Best regards,
l0f4r0
ave any advice to share?
Thank you in advance :)
Best regards,
l0f4r0
y know why but sometimes I like `less`
simplicity (i.e. few things to remember) hence my initial question :)
NB in vim: `v/pattern/d` = `g!/pattern/d`
Thanks again!
Best regards,
l0f4r0
Bonjour,
8 avr. 2021, 18:54 de denis.fer...@gmail.com:
> Pour avoir la dernière version sur debian stablé j’ai du la compiler moi-même
> mais ce n’est pas sorcier.
>
Tu parles de KeepassXC ?
Auquel cas, c'est dispo via snap également.
Bonne soirée
l0f4r0
A %d %B'
> exec 9>&-
> xargs -a /tmp/mydate -d'\n' date
>
Merci, ça m'a fait réviser xargs et les redirections/descripteurs de fichiers
non standards ;)
25 mars 2021, 19:14 de k6dedi...@free.fr:
> Pour info : tutorial bash
> http://aral.iut-rodez.fr/fr/sanchis/enseignement/bash/
>
Oui, ce cours est vraiment top je trouve.
Je l'avais massivement utilisé à mes débuts en bash !
Bonne fin de journée
l0f4r0
> and so on, using Left/RightArrow, or even use " if the
> pattern itself contains ' characters.
>
> I tend to paste with Shift-Insert (needs less hand-eye coordination).
>
It works indeed.
I just thought there was an immediate, simple and dedicated command for that.
I suppose everyone's needs/workflows are different ;)
Thanks & Best regards,
l0f4r0
de xargs (en coordination avec `-n`).
Après faut voir si ton processeur le permet mais l'idée est de paralléliser les
process lancés par xargs.
Vu la volumétrie concernée, ça peut faire gagner du temps :)
l0f4r0
he one linux-signed-amd64 source
> package:
>
Can you tell me please how one can know that?
> why would one create 108 identical source packages with different names when
> one is sufficient? ;-)
>
;)
[*] : https://lists.debian.org/debian-backports/2021/03/msg00013.html
Best regards,
l0f4r0
4 avr. 2021, 10:02 de l0f...@tuta.io:
> Tu peux limiter le nb de ses arguments par commande lancée en utilisant
> l'option `-n`.
>
> Tant que t'y es, pour garder un œil sur les commandes générées, t'as qu'à
> aussi utiliser l'option `-t`.
>
Précision : je parle des options de `xargs`
l0f4r0
avec bien sur /tmp/empty qui est vide
> Mais après deux heures de fonctionnement, je n'ai aucun retour de la
> commande !
>
Ingénieux.
Pour l'histoire du retour manquant, t'as qu'à ajouter l'option `-v`.
l0f4r0
here.
>
Actually, what I need is just linux-image-5.10.0-0.bpo.4-amd64 but it hasn't
been made available yet. This one will be related to kernel 5.10.19-1~bpo10+1.
> Perhaps it's worth subscribing to debian-backports-changes and
> debian-backports. You can post to the latter.
>
That's a good suggestion, thanks :)
Best regards,
l0f4r0
, I maintain my position. The package you are quoting (lastly) is maybe
more recent but *unsigned*.
However, I need the signed one because I use Secure Boot... ;)
Best regards,
l0f4r0
own investigation.
And finally, I'm thinking that it would be too bad to lose the remaining lines
so I'm looking for a way to save them eventually.
Of course, you're right, if I knew beforehand what to look for, there are more
appropriate and advanced tools (even sed)! :)
Best regards,
l0f4r0
e no problem with that but maybe this subtlety could be stated more
explicitely somewhere? Just a suggestion so one doesn't have to dig too much to
understand that...
Best regards,
l0f4r0
t need to
reenter the same pattern twice for such a basic need...
No easy condensed way for that? :)
Best regards,
l0f4r0
;!" command inside
less.
Indeed, commands like "|", "-o" or "s" inside less don't seem to take filtering
into account...
Thanks in advance :)
Best regards,
l0f4r0
st wanted to make sure my conf is OK (and
obviously it wasn't configured in such a way to get the latest kernel versions
from backports)...
Thanks in advance.
Best regards,
l0f4r0
).
Pour ton cas, ça donne donc :
date_args=( --date="1 days ago" )
date "${date_args[@]}" "+%A %d %B"
Bien cordialement,
l0f4r0
to date yet (5 days old)?
Thanks in advance :)
Best regards,
l0f4r0
Hi,
9 févr. 2021, 19:44 de mailingl...@darac.org.uk:
> Certainly. > https://www.kernel.org/doc/html/latest/usb/authorization.html
>
+ https://usbguard.github.io based on it.
Best regards,
l0f4r0
Hi,
26 janv. 2021 à 10:44 de to...@tuxteam.de:
> And thank Greg (I hope I'm not mis-assigning) for mentioning
> /etc/wgetrc and .wgetrc!
>
Let's not forget Darac Marjal who was the first (by a few minutes) actually ;)
Best regards,
l0f4r0
therwise you would get
nothing as unattended-upgrades is not interactive...
As a single user with only interactive upgrades, I'm not sure
needrestart-session is useful to me right now. needrestart is probably enough.
Thanks
l0f4r0
t; like "lightdm" in there to prevent you from sawing off the branch you
> are sitting on.
>
Ok, I didn't get this is the meaning of "override". Clear now, thanks.
Best regards,
l0f4r0
,
l0f4r0
Hi,
I don't know for your exact error message but I can say personally that I have
no real issue anymore since I switched to Android File Transfer For Linux...
https://github.com/whoozle/android-file-transfer-linux
You might give it a try.
NB: I'm on Buster.
HTH
Best regards,
l0f4r0
Discussions sur :
* https://linuxfr.org/users/devede/journaux/virus-mirai-dans-ventoy
* https://github.com/ventoy/Ventoy/issues/660
* https://forums.linuxmint.com/viewtopic.php?f=61=337872
*
http://www.gratilog.net/xoops/modules/newbb/viewtopic.php?start=0_id=17344=flat=ASC
l0f4r0
https://github.com/ventoy/Ventoy/issues/31
* https://github.com/ventoy/Ventoy/issues/371
* https://github.com/ventoy/Ventoy/issues/468
* https://github.com/ventoy/Ventoy/releases/tag/v1.0.30
* https://virusscan.jotti.org/fr-FR/filescanjob/zbspdtr2ml
* https://virusscan.jotti.org/fr-FR/filescanjob/0z1do6tv6r
l0f4r0
dans les listes, j'ai remarqué en autre symptôme que chaque
> choix sur lequel ma souris passe ne se colore plus (y a plus d'effet
> :hover)...
>
A toutes fins utiles, tous mes soucis que j'évoquais viennent de disparaître
après avoir désactivé l'accélération matérielle :)
Ça vaut sûrement le coup d'essayer, sait-on jamais...
l0f4r0
Hi,
If you don't have any real and valuable data on your usb stick, you should
probably format it.
See https://forum.mxlinux.org/viewtopic.php?t=46930 for example.
Best regards,
l0f4r0
ile via your favorite file manager and
drag it to your answer for automatic attachment.
Regarding /etc/X11/xorg.conf.d/40-libinput.conf, you can do the same but as
this file is very light, you can just type the following command and paste the
result in your email:
cat /etc/X11/xorg.conf.d/40-libinput.conf
Best regards,
l0f4r0
i xserver-xorg-input-wacom 0.34.99.1-1
> amd64 X.Org X server -- Wacom input driver
>
Same here except the size of file 40-libinput.conf...
Just to be sure, can you please provide us with its content?
> kaye@laptop:~$ l0f4r0
> bash: l0f4r0: command not
;
> It did not work. I guess it's to be expected since I'm using Debian 10 and
> not 9?
>
> Any workaround?
>
What are the following outputs please?
ls -l /etc/X11/xorg.conf.d/40-libinput.conf
dpkg -l | grep -i xserver-xorg-input
l0f4r0
suis aussi intéressé par la solution si qqun trouve l'origine.
NB : Toujours dans les listes, j'ai remarqué en autre symptôme que chaque choix
sur lequel ma souris passe ne se colore plus (y a plus d'effet :hover)...
l0f4r0
Bonsoir,
27 nov. 2020 à 19:08 de no-s...@tootai.net:
> Le 27/11/2020 à 18:46, k6dedi...@free.fr a écrit :
>
>> Je me souviens pas que cron puisse lancer une commande lorsque l'on rallume
>> la machine (alors que anacron le fait si cette opération était programmée
>> alors que le PC était
ug=667995
There is also another potential solution at
https://ubuntuforums.org/archive/index.php/t-2055965.html but I'm not sure it's
recommended...
Best regards,
l0f4r0
0 avec mon Hotmail.
>
> Le message que j'ai poster au mois d'octobre as été publier.
>
En tous cas, bonne nouvelle, le présent email est bien disponible sur la liste
:)
l0f4r0
ne 3ème adresse email pour discuter avec listmaster@ ? As-tu également
moyen de sortir avec une autre IP pour tester ?
NB : As-tu des soucis avec toutes les autres listes Debian auxquelles tu es
abonné (@lists.debian.org) ?
l0f4r0
ien à dire de son
côté...
16 nov. 2020 à 00:03 de martin_vez...@videotron.ca:
> et j'ai envoyer le message à "> debian-user-french@lists.debian.org> "
>
En effet, je ne vois pas cette réponse sur la ML.
Bon courage
l0f4r0
1 - 100 of 268 matches
Mail list logo