A recent upgrade on my Sid Desktop has produced a strange problem with
kopete. Now on my contact list every other contact is encased in a dark
grey. The program functions ok, but it makes the contacts hard to read
and is quite annoying. I've checked the settings and can find no way to
fix the pr
On Wed, 2004-03-17 at 08:29, Daniel Urban wrote:
> Hello
> I've got in my Debian box 2GB memory, but system see only 1GB (top)
> It's 2.4.18-bf2.4 kernel.
> WIndowx XP and Bios see all memory,
> and I've checked this on another computer with other memory.
> Thank you for your help.
> Daniel
If I
I'm sure most of you have seen or heard about this
http://slashdot.org/articles/04/03/01/1818201.shtml
I must say that I didn't think I could have a lower opinion of the owner
of EV1, but I have been proven wrong. I used to work for EV1, as a
matter of fact one of the early employees, when they
I have a client that among other things is about to start a Web-based
Talk audio show. His early needs would be to Stream the audio from the
webserver. Has anyone had experience in this area? I would love some
advice on software plus hardware.
My first thoughts would be to use icecast on the web
I have a box that I use for routing, it's running sid, with ipmaq on
it. It works fine for the most part. For a while I had an internal
axis webcam that was port forwarded. I use to put in the following at
the command prompt
iptables -t nat -A PREROUTING -j DNAT --proto tcp --dport
--to-d
I installed Sid on a box yesterday. I set it up with apache, php4, and
mysql. I transfered a working site over to the box, but when I connect
I get an error that mysql_pconnect is an undefined function. I checked
and I do have the php4_mysql package installed, as a matter of fact I
re-installed t
I have had a rescent problem where gzip nolonger works on my woody
server. it seg faults.
I tried to
# apt-get install --reinstall gzip
Reading Package Lists... Done
Building Dependency Tree... Done
0 packages upgraded, 0 newly installed, 1 reinstalled, 0 to remove and
0 not upgraded.
Need to g
On Mon, 2004-02-09 at 23:46, Kent West wrote:
> techlists wrote:
>
> >I am running Sid with KDE, and was wondering if I am logged in and have
> >some programs running, is there a way for someone else to log into x on
> >the same terminal, without shutting down the programs
I am running Sid with KDE, and was wondering if I am logged in and have
some programs running, is there a way for someone else to log into x on
the same terminal, without shutting down the programs I have running?
that way when they are finished, I can re-log in and continue where I
left with the p
Hey guys, I'm looking for something I can use to edit and mix music.
Under Winblows I used Reason. But I have yet to find a linux
equivalent.
I looked on freshmeat, and found a program called Veejay, but I can't
seem to get it to compile under SID.
So, I'm wondering if any of you guys have expe
A while back I seem to remember someone had a problem with KDE sound
working, and then every so often it would just stop working
Since upgrading from woody to sid I have been experiencing this
problem. Is this a known problem, and if so is there a fix?
and if not, how do I re-initialize sound wi
On Tue, 2003-11-25 at 18:21, Rob Benton wrote:
> Last time I looked into Tivo it somehow downloaded a list of available
> programs from the satellite/cable feed and kind of "grep-ed" on that for
> things you were interested in. That would probably be the hardest part.
Not hard at all...this can b
I have a Smart-Card reader, and I am wanting to set up a smart-card
based login security. Where a user must insert a smart-card to login
successfully.
Does anyone have any experience with something like this? Are there any
projects that deal with this sort of thing?
Wayne
--
To UNSUBSCRIBE,
On Sat, 2003-11-08 at 12:49, Alex Malinovich wrote:
> On Sat, 2003-11-08 at 10:22, Joel Konkle-Parker wrote:
> > Christian Schnobrich wrote:
> > > On Fri, 2003-11-07 at 00:52, David Millet wrote:
> > >
> > >
> > >>>
> > >>
> > >>Or not until wine begins running these and every windoze app that
On Thu, 2003-11-06 at 17:52, David Millet wrote:
> > > all I have to say is that I personally want linux to rule the desktop,
> > > simply because I will stand to make alot of money when big companies
> > > start picking it up. a lot of us will, in fact.
> > >
> > > i'm extremely confident that
On Sat, 2003-11-01 at 01:11, Cristian Gutierrez wrote:
> Wayne Sitton <[EMAIL PROTECTED]> writes:
>
> >ok this is another plea for help. I've got an AverTV Studio tv
> >tuner/fm radio/capture card. I know it is supported because when I
> >boot into Knoppix from a knoppix cd the card works perfec
On Tue, 2003-10-28 at 22:23, Greg Folkert wrote:
> On Tue, 2003-10-28 at 11:10, techlists wrote:
> > bttv0: Bt878 (rev 17) at 00:0f.0, irq: 11, latency: 64, memory: 0xcbdf
> > e000
> > bttv0: detected: AVerMedia TVPhone98 [card=41], PCI subsystem ID is 14
> > 61:0
I recently purchased an AverTV Studio card. I have installed it, and
enabled the bttv driver. All seems well in dmesg
Linux video capture interface: v1.00
i2c-algo-bit.o: i2c bit algorithm module
bttv: driver version 0.7.83 loaded
bttv: using 2 buffers with 2080k (4160k total) for capture
bttv:
On Thu, 2003-10-23 at 20:06, Antony Gelberg wrote:
> On Thu, Oct 23, 2003 at 12:33:43PM +0200, Nicos Gollan wrote:
> > On Thursday 23 October 2003 03:02, techlists wrote:
> > > it seemed to install ok, but when I rebooted, the machine would show
> > > LI and start b
On Thu, 2003-10-23 at 13:40, [EMAIL PROTECTED] wrote:
> Hi,
> I'm trying to install the NVIDIA drivers but I get this error:
>
> ERROR: Unable to find the kernel header files for the currently running kernel.
> Please make sure you have installed the kernel header files for your
>
On Wed, 2003-10-22 at 18:46, Andrés Roldán wrote:
> See the boot-as= option on lilo.conf(5)
>
> Moreover, I'd like to hear what happened with your lilo.conf file after
> the dist-upgrade.
>
> Thanks.
>
it seemed to install ok, but when I rebooted, the machine would show
LI and start beeping
Ok, I use to have a setup where Linux was on my primary HD, and windows
was on a 2nd slave HD. I had once found some options to put into lilo,
that made it possible for winXP to boot off the slave, which it won't do
with a standard dual-boot setup. I think the option made winxp think it
was on th
I am looking to do some video capture, editing, and maybe watch TV on my
Desktop. I am running Woody, KDE 3.1, AMD XP1300, 512 meg ram, and an
nVidia GeForce ti 200 /128 meg ddr ram.
going trough the company's "box o' parts" I found 2 older ATI ALL in
Wonder cards.
One is a PCI ALL in Wonder, t
I have a slight problem with xmms, and freeamp. Both, on the start-up
of playing the first song lock-up for approxametly 5 minutes...then
start playing fine. after the initial lock-up the programs run with no
problems what so ever.
I've run the programs from the command line, but neither pro
Strange problem. Whenever I use XMMS or Freeamp, the first song I open
will lock up the program for about 10 minutes, then work fine. nothing
else locks up, and after that any other song opened will play
immediately as long as the program is not closed.
running woody, KDE, AtalonXP +1300, 512 m
Are you using the BF2.4 net install disks? I had the same problem until I
realized that the apt sources list on the install set you to stable, not woody.
So your get base of woody, and then the initial install packages pull from
stable and it causes all kinds of problems.
Wayne
Tom Allis
I'm trying to try out the sourceforge package, but during the configuration it
errors at ldap_bind. I'm know nothing about ldap, so I'm wondering if someone
could tell how to fix thís problem. The install goes as follows:
running dpkg --pending --configure ...
Setting up sourceforge (2.5-29) .
I'm setting up a Compaq ML370, and one of the developers wants me to install X.
The box boots with video defaulted to the Compaq RIB, which has an ATI rage
IIc video chipset. I've configured things normally. Used the ati driver, but
when I try to start X it says
ATI(0): Adapter has not been
FOr two weeks now, I have been trying to do a net install of woody on 2
different servers. I have even used different apt servers with the same
result. I started by just doing a base install, selecting nothing at tasksel.
The install errors at libopenldap-runtime. When I goto dselect to remo
I'm running proftp on Debian woody. How do I set it to have all uploadded files
to default to permission 664 and directories to 775?
Jack
OK, I'm about to pull my hair out over this, so I'm hoping someone here can
give me a clue.
I've got a server that is currently running Debian Woody. It's been running
since potato first went stable, upgraded to woody about 9 months ago. But, in
the last month, I've had to reboot it twice.
It
Okay, I have a laptop with an embedded nic, and A wireless Netgear MA401 PCMCIA
card. Both work fine except for one problem.
If the wireless nic is in on boot, once it boots I have to ifconfig eth0 down
in order for the wlan0(wireless) to work.
Is there a way for the system to just recognize t
I'm trying to get my USB mouse working under woody. Could someone point me to
a how-to or something
I'm compiling a new kernel(2.4.17) for my laptop, and I know this may be a
newbie question, But what do I enable in the kernel to enable it to
automatically power off when shutdown is done?
John
I had a dual boot system workin fine. Win2k and Debian woody(kernel 2.4 17).
I decided to add a 2nd video card..win2k, I've had no problems. but with
Debian, on boot up it shows the card and locks up. My main Video card is an
Nvidia GeForce II 400MX AGP, and the other is an ATI All in Wo
Hey guys, this is not a coruption, but a new thing with Gnome. I had the
problem and wrote Gnome Directly. They have decided that you should not be
able to login to Gnome as root. You should always login as the user and su to
root. I think I was told that it could be fixed in the gdm.conf.
I was reading today about the pending release of libranet 2.0. And, realizing
that they are the last commercial linux based on Debian, got me to thinking.
(scary as that is!) Of all the other commercial versions, Corel, Storm,
Prodgeny, has any of their advancements made it back to the debian
I have installed Webmin through the tar ball and haven't had any problems. But
with a new server, which I installed woody, I used apt to install it. But,
although I look in dselect and the modules are added, they don't show up in
webmin.
Should I just install the tarball instead of the apt pa
I finnally got Xine running on my laptop, but it plays everything except DVD's.
Any one know what package I have to add for this?
Wayne
I've got a user who I think is screwing up my server. How do I set up a log to
"log" everything this person does? And can I watch it real time?
John
When I installed Potatoe, the sound card worked perfectly. I set it up so my
user worked fine. I upgraded to woody, and still the user sound worked fine.
I upgraded to 2.4.17, now root can do sound, but the user cannot.
I compiled the sound driver into the kernel, and like I said root works fin
OK, I think people are missing what I'm asking. I'm using the nvidia driver in
XFree86. But, I have been doing vga=791 in lilo. So, what I was
wondering...Does it hurt my setup, or is there an advantage to it?
Wayne
Caleb Shay <[EMAIL PROTECTED]> wrote ..
> On Mon, 2002-01-07 at 07:26, [EMA
I have an nVidia GeForce 2 MX 400. I have compiled the nVidia drivers and it
works fine. When I had originally compiled the 2.4.17 kernel, I had enabled
the nVidia framebuffer in it. So, should I use it? Is their a performance
increase or decrease when using the framebuffer. What are the
a
Ok, when I originally set up the system it was potato and everything worked
fine.
Sound worked for root and my user.(so I know it's not a group problem.)
I upgraded to woody, still everything worked fine.
The card is a Soundblaster pci 128, and I used the es1370 module, and it worked.
Then I c
I have always used mysql and have never used postgresql, so I'm interested in
this too. But, What do you mean about MySql not being a true Database?
Wayne
martin f krafft <[EMAIL PROTECTED]> wrote ..
> hi,
> *PLEASE DON'T MAKE THIS INTO A FLAME WAR*
> if you are taking anything personal, pleas
Okay, my bad...I started to look at the links on the page...It's a joke.
When he talks about disaplining his kid he refers to spanking, which is a link
to a spanking porn site.
Wayne
Manuel Ferrero" <[EMAIL PROTECTED]> wrote ..
> > This guy either is extremy clueless or just ironic. I'm
> > af
This has got to be a joke. Looking through the site, this guy has made
comments to other people's stories. And there are alot of them bad mouthing
Linux. Well, everytime he posted he spelled Linux correctly, so why now when
he's really bashing it he spells it lunix. Plus if you folow the lin
I running of of steam here. I'm trying to install a netgear MA401 802.11b
wireless card on my laptop. I followed the directions on the Netgear CD. I
emailed their support, and they say that although they supply linux drivers on
their cd they do not support linux, and cannot help me. I've bee
First I tried compiling the 2.5.1 kernel, it compiled fine, but I got alot of
lock-ups when I rebooted.
So I downgraded my binutils, and compiled the 2.4.16, and am doing fine.
Thanks for the help.
John
Hans Ekbrand <[EMAIL PROTECTED]> wrote ..
> On Sun, Dec 16, 2001 at 08:00:07PM -0600, [EM
I successfully compiled the 2.5.1 kernel. But, now when rebooting it locks up
at
kHTTPd: Management daemon stopped
You can unload the module now
Any clues hos to figure out why it's locking up?
> make dep before making bzlilo
I did do make dep, after the make menuconfig.
> also what version of gcc are you using? gcc --version
2.95.4
I'm running woody, I have done kernel compiles on this machine before.
Right now it's running 2.4.3
John
Marc Britten <[EMAIL PROTECTED]> wrote ..
I'm trying to compile 2.4.16 for my laptop. I do all the
make clean
make mrproper
make menuconfig
all work fine, but when I do make bzImage,
I get
drivers/sound/sounddrivers.o(.data+0x274): undefined references to 'local
symbols in discarded section .text.exit'
make:*** [vmlinux] Error 1
Wha
I have a SB PCI 128, I had everything setup and working fine under woody. I
used the essoniq es1370 module, and it worked fine.
I upgraded to kernel 2.4.16, afterwards I did a modconf it was still selected
as a module, but when I log into KDE as myself I get no sound, and when I open
the Sound
I'm having real trouble getting the Netgear MA401 working. I'm running Woody
with the 2.4.3 kernel. Obviously, the card is not supported out of the box.
I followed their instructions which had a pcmcia-cs compile and a linux-wlan
compile(both are their programs). It doesn't work. I've got a s
I upgraded to woody, and now when I use KMail to download my email, it doesn't
show the headers correctly, most email show "No Subject" and sender "unknown"
But if I look at the headers in vi the info is there.
Anyone else having this problem?
John
I upgraded to woody, and now when I get my email with KMail, half of the emails
don't have "no subject" and sender "unknown" But when I look at the headers
the information is there.
Found it...Thanks!
Gregor Anders <[EMAIL PROTECTED]> wrote ..
>
> Hallo DE SMAELE Kim (BMB),
>
> > how do I enable it?
>
> choose the first option available at all after make menuconfig
>
> Code maturity level options --->
> [*] Prompt for development and/or incomplete code/drivers
>
experimental? experimental what? where?
jim
Steffan Baron <[EMAIL PROTECTED]> wrote ..
>
> Did you enable 'experimental'?
>
> Gruss
> Steffan
>
>
> On Mon, Dec 10, 2001, [EMAIL PROTECTED] wrote:
> >
> >This may sound like a really stupid question, but...
> >
> >I'm trying to compile Ker
This may sound like a really stupid question, but...
I'm trying to compile Kernel 2.4.16. I do a 'make menuconfig' But I can't find
anything on framebuffer support. I need to enable framebuffer support for my
video card to work. Can someone give me a hint as to what this option is
called or
Has anyone tried the Nokia PCMCIA Card Cell Phone? I'm considering buying one
and was wondering if it would run on My Laptop.(Debian/woody/2.4.3)
For those of you who don't know it's a pcmcia cell phone.
Wayne
When I did a cat /dev/usbmouse
it said no device present.
So I
#mkdir /dev/input/mouse
#mknod /dev/input/mouse c 13 63
#rm /dev/usbmouse
#ln -s /dev/input/mouse /dev/usbmouse
restarted X and everything is working fine
Wayne
dman <[EMAIL PROTECTED]> wrote ..
> On Tue, Nov 27, 2001 at 10:12:17
I' running woody with a 2.4.3 kernel. I have the usb stuff compiled in the
kernel. According to the boot up messages it recognizes the usb weel mouse.
set it as usb1:2.0
But when I configure X for /dev/usbmouse
It says there is no such device.
I've looked under /dev and it is there.
What am I
I'm trying to compile the 2.4.14 kernel to go on my
laptop, but I can't seem to find where to enable vesa framebuffering or any kind
of framebuffering. Where is it under make menuconfig?
Wayne
I've can't seem to get X to work correctly on my ASUS A1300 Laptop. Every time
I try to start X the screen turns black, the it starts turning white from the
bottom right corner and continues to fill the screen. That can't be a good
thing. The Video is an SIS630. I'm running Woody, with a 2.4
> rkrusty (Ian Moore) was also the mantainer whene the archive was in tdyc
I know, I'm just commenting that he may need some help because it seems he's
having a few problems now. I guess that could be because of the ever changing
packages in an unstable distribution.
Jack
Oscar Riveros <[EMA
> 'cause you're not supposed to login as root. You're not supposed to
> run a window manager or a desktop or any of that stuff. See 'man su'
> and 'man sudo' for better alternatives.
So who was the idiot genius that thought that one up. Normally I do login as
my user and su when I need to do
Upgraded to woody, now GDM will not accept my root password. I can change
terminals and I can log in as root fine, but GDM will not accept it, but will
allow user login. So, I installed KDM since I log into KDE anyway, but KDM
does not show KDE as a choice for my GUI. I had no problem loggin
I installed Debian, and upgraded to Woody. I have an Nvidia Gforce 2 64meg
video card. I installed XFree86 4, and followed all the settings but when I
try to start X it errors saying there are "no screens available"
John
I've noticed that progeny Debian has auto-upgrade of kernel upgrades. How do I
do this with my Desktop Debian system, and what are the cons?
Wayne
I have an AMD k7 800mhz computer. The mother board has on board sound. it's a
VIA AC 97 audio Chipset. Anyone have any luck getting this to work. On the
install I loaded the AWE32 module and it accepted it. now I can play cd's, but
I have to turn all volume levels to full, but the sound is v
I just had the problem on 2 computers. I recently did a fresh install of
Debian 2.2 r2 on my Desktop and my Laptop. I installed most
packages,xfree86, gnome, etc From the cd it installs XDM, and makes
Window maker my default. No biggy, because untill I started using KDE,
window maker was m
I just had the problem on 2 computers. I recently did a fresh install of
Debian 2.2 r2 on my Desktop and my Laptop. I installed most
packages,xfree86, gnome, etc From the cd it installs XDM, and makes
Window maker my default. No biggy, because untill I started using KDE,
window maker was my
Title: Multiple IP addresses on one machine, and routing.
Are
adding routes into your system?
for
instance when I added 2 ip's to one card, I do it like this
ifconfig eth0:1 xxx.xxx.xxx.xxx
ifconfig eth0:2 yyy.yyy.yyy.yyy
route
add -host xxx.xxx.xxx.xxx eth0:1
route
add -host yyy.yyy.yyy.y
this.
techlists wrote:
> O.K. so why does the php3 mods refuse to talk to mysql?
>
> Wayne
>
> -Original Message-
> From: Colin Watson [mailto:[EMAIL PROTECTED] Behalf
> Of Colin Watson
> Sent: Tuesday, May 29, 2001 1:44 PM
> To: debian-user@lists.debian.o
I had under the former subject.
I had originally had Debian (stable) set up with php4 and a site done with
php-nuke.
I started working on a new project that, because of certain requirenments,
was better suited for woody. So, I upgraded. During the upgrade, it
un-installed php4. After the upgrad
O.K. so why does the php3 mods refuse to talk to mysql?
Wayne
-Original Message-
From: Colin Watson [mailto:[EMAIL PROTECTED] Behalf
Of Colin Watson
Sent: Tuesday, May 29, 2001 1:44 PM
To: debian-user@lists.debian.org
Subject: Re: php4 and woody
"Wayne Sitton" <[EMAIL PROTECTED]> wrote:
PROTECTED]
Sent: Tuesday, May 29, 2001 8:57 AM
To: techlists
Cc: debian-user
Subject: RE: woddy +PHP+ php-nuke
At 10:59 PM 5/28/01 -0500, techlists wrote:
>The package i have installed is php3-mysql 3.0.18-12
>
>Wayne
>
d'oh.. i find that one always worth checking...
i guess
Checked it, I even added a new user gave it all permissions, and changed to
the new user in the config.php,no luck!
Wayne
-Original Message-
From: John Griffiths [mailto:[EMAIL PROTECTED]
Sent: Tuesday, May 29, 2001 8:57 AM
To: techlists
Cc: debian-user
Subject: RE: woddy +PHP+ php
The package i have installed is php3-mysql 3.0.18-12
Wayne
-Original Message-
From: John Griffiths [mailto:[EMAIL PROTECTED]
Sent: Tuesday, May 29, 2001 8:42 AM
To: Wayne Sitton
Cc: debian-user
Subject: Re: woddy +PHP+ php-nuke
At 10:43 PM 5/28/01 -0500, Wayne Sitton wrote:
>I had php-n
I
would recommend changing from proftp to ncftp, it has a conf file that has a
default to lock users into their home directory. I would also recommend
using webmin for server administration. This can be found at http://www.webmin.com.
Wayne
-Original Message-From: Mike Egglesto
I'm using stable.
I've tried re-installing.
I install exim and exim works fine(which is what I'm running now), but when
I try to install sendmail, I get the same problem.
wayne
-Original Message-
From: okidz [mailto:okidz]On Behalf Of Oki DZ
Sent: Sunday, May 27, 2001 9:57 PM
To: Wayne S
Well, why is kde.tdyc.com down anyway?
Is the only need, is for somewhere to host?
I have my own company and could set up a server for that purpose.
So what is the complete need?
wayne
-Original Message-
From: Nick [mailto:[EMAIL PROTECTED]
Sent: Sunday, May 27, 2001 3:22 PM
To: debian-k
XFree86 4.+ quit using xf86config, if you look at the install directions on
xfree86.org
beginning with xfree86 4.0 you should use the command
xfree86 --configure
wayne
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Philipp
Bliedung
Sent: Sunday, May 27, 20
No, there is no mention of an error in the error logs.
Come to think of it I had also installed jserv, and it has never worked.
Wayne
-Original Message-
From: Colin Watson [mailto:[EMAIL PROTECTED] Behalf Of Colin Watson
Sent: Saturday, May 26, 2001 1:28 PM
To: debian-user@lists.debian.o
This is a stupid question, but hopefully someone can answer.
When you telnet into a debian, or any linux box, at the login in prompt, it
shows the dist name, and server name. How and where can you customize this.
Also after you log in it shows warning info, where can that be changed?
rick
I'm running woody on my webserver. I haven't had any problems until now.
I went into dselect and updated with the debian servers. I added joe, and when
I went to install It un-installed my apache server. Don't know why. I'm very
confused by this. Anyhow, I looked around on my box and it purge
I'm running woody, the newest balckdown jdk, and apache jserv.
The problem is the jdk just stops working, or it could be the jserv. but there
are no errors in the log files. does anyone have anysuggestions on how to
troubleshoot this?
Wayne
I just set up a new workstation, I installed Debian 2.2 then upgraded to woody.
I configured x with no problems. I set my mouse up on the gpm
server(/dev/gpmdata) Everything working fine in X. The I added tdyc to my
sources list, then did an apt-get update, then did apt-get task-kde.
Every
The last ISP that I worked for used communigate pro, http://www.stalkyer.com
They claim it can handle well over 30,000, and it has web based, as well as
pop3 and imap.
Wayne
Michelle Konzack <[EMAIL PROTECTED]> wrote ..
> Hello,
>
> I have the same problem.
> I like to use postgresSQL for my
You're the man Richard!
As soon as I set the suid bit, the 'you have new mail' popped up.
Wayne
Richard A Nelson <[EMAIL PROTECTED]> wrote ..
> On Fri, 23 Feb 2001 [EMAIL PROTECTED] wrote:
>
> > First I moved my server to a new co-lo facility, and changed the ip address.
> > Then, because I wa
First I moved my server to a new co-lo facility, and changed the ip address.
Then, because I wanted to install webmail, I upgraded to woody, which I have
done on my laptop with minor problems. When I did the apt-get dist-upgrade, it
uninstalled me sendmail server. After the upgrade, I went into
I know, but the new config file makes no mention of virtual settings, so I'm not
sure where to set it to 1024x768.
Wayne
Joris Lambrecht <[EMAIL PROTECTED]> wrote ..
> you're addicted aren't ya ? you'll have to edit the /etc/X11/XF86Config file
> and adjust the virtual entry to 1024 768
>
> goo
I just bought Railroad Tycoon II for Linux. It only runs at 1024x768. My
Laptop will only do 800x600, I'm running woody, XF864.0.2, KDE 2.0.
How do I make my Virtual Desktop 1024x768, so I can play this on my Laptop.
It runs fine on my Desktop, I guess it serves me right for going with a clon
I finnaly got my desktop computer like I want it. Debian Woody, XF864.0.2,
2.4 kernel. Now I want to make an iso image, so If I mess anything up, I can
restore it back to it's original state. The only problem is it's a 7 gig drive
and when I make an image it's bigger than a cd. So my question
The problem was actually in Apache. It didn't install completely. I went into
the httpd.conf, and all that was in there was just the modules, no other config
info. The srm was completely blank. I removed both apache and jserv. The I
just installed apache, once it was configured and running,
I'm running woody on a server, I used dselect to install apache and jserv.
Now when apache tries to start up it errors saying:
Syntax error on line 120 of /etc/jserv/jserv.conf:
Invalid command 'SetHandler', perhaps mis-spelled or defined by a module not
included in the server configuration
Line
I had stable installed with X (which ever comes with stable), and KDE 2, on my
laptop. Everything running fine
I upgraded to woody, and then installed x 4.0.2. It unistalled KDM, Why? Does
KDM not work with XF86 4.0.2? When I type startx the bare wm comes up, but the
mouse no longer worked, so
what is the command to connect to CPAN to down load modules...I've had a brain
fart and can't remember
wayne
Has anyone had experience setting up 'Webmail' from sourceforge? I've tried
to install it, but I run into problems installing apache jserv.
i tried using the jserv in dselect. But webmail claimed it needed a newer
version. So when I downloaded the newest one from apache, It errors saying
that
Check this out, An all Linux ISP who will even Phone Support Linux Clients!!
http://www.mylinuxisp.com
It's about time!
Wayne
1 - 100 of 108 matches
Mail list logo
