On Fri, 24 Feb 2023, Keith Bainbridge wrote:
Remember too that many distros have activated a grub setting that means it will
no longer search for other installations. Turn that off:
Edit the file in /etc/default named 'grub'. Add 'GRUB_DISABLE_OS_PROBER=false'
anywhere in the script. Run
Remember too that many distros have activated a grub setting that means it will
no longer search for other installations. Turn that off:
Edit the file in /etc/default named 'grub'. Add 'GRUB_DISABLE_OS_PROBER=false'
anywhere in the script. Run grub install, 'grub-install'
--
All the best
On Thu, Feb 23, 2023 at 12:49:25PM +, Simeone Dominique wrote:
> Good afternoon,
> i installed a linŭx deepin operating system in addition to debian and linŭx
> mint and when i start the fujitsu it boots to the bios as if there is no
> operating system.
> What to do?
> Good for you.
> Mr.
Good afternoon,
i installed a linŭx deepin operating system in addition to debian and linŭx
mint and when i start the fujitsu it boots to the bios as if there is no
operating system.
What to do?
Good for you.
Mr. Dominique Simeone
Hi,
thanks for answer.
It was a stupid problem !!!
The slot is bad !!, when I changed the slot everything is now working
fine!!!
thanks for all
best regards
bela
hi,
I added to my machine PC P4, running debian and others, ubuntu, pc
wireless card :, the same card I used it on other machine, it ran nice.
On my machine, the lspci gives :
03:02.0 Class : RaLink rt2561/rt61 802.11g pci (rev ff)
On the other machinei have * Ethernet Controller*
On Fri, 27 Aug 2010 13:00:11 +0200, abdelkader belahcene wrote:
I installed the divers firmware-ralink and other realtek . and
network-manager, but nothing.
on other machine, that was enough to run it correctly.
(...)
Check that you already have installed the required firmware for the
On 08/27/2010 04:00 AM, abdelkader belahcene wrote:
hi,
I added to my machine PC P4, running debian and others, ubuntu, pc
wireless card :, the same card I used it on other machine, it ran nice.
On my machine, the lspci gives :
03:02.0 Class : RaLink rt2561/rt61 802.11g pci (rev
On 08/27/2010 11:40 AM, Kevin Ross wrote:
On 08/27/2010 04:00 AM, abdelkader belahcene wrote:
hi,
I added to my machine PC P4, running debian and others, ubuntu, pc
wireless card :, the same card I used it on other machine, it ran nice.
On my machine, the lspci gives :
03:02.0 Class
David A. Parker wrote:
Thomas H. George wrote:
If your slave drive has failed completely, it's possible that your
master drive needs to be jumpered as single instead of master (if
it is one of those drives which make that distinction). Sometimes the
BIOS will get hung up for a while
Problem: Very slow bootup while grub tries repeatedly to get responses
from a dead ide slave drive. If the ide slave drive is disconnected
bios apparently spends a long time searching for ide drives and grub
loads very slowly but, once loaded, boots the system quickly. If I
enter bios at
: OT: BIOS Problem
Very slow bootup while grub tries repeatedly to get responses
from a dead ide slave drive. If the ide slave drive is disconnected
bios apparently spends a long time searching for ide drives and grub
loads very slowly but, once loaded, boots the system quickly.
I have had
Thomas H. George wrote:
If your slave drive has failed completely, it's possible that your
master drive needs to be jumpered as single instead of master (if it
is one of those drives which make that distinction). Sometimes the BIOS
will get hung up for a while trying to find a second
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hallo Andreas,
| Nun weiß ich, von den 8GB bzw. 32GB-Grenzen der alten BIOSe. Meine
Frage ist,
| ob eine korrekte Partitionierung einer größeren Platte nun Indiz für
| Funktionsfähigkeit ist, oder nicht?
Wirf mal einen Blick hierhin:
Liebe Liste,
neulich habe ich versucht, in einen Rechner, von dem ich nur weiß, daß er
einen Intel 440LX-Chipsatz hat (erstes Aldi-Modell von 1998) eine
60GB-Festplatte einzubauen. Da Partition-Magic und cfdisk die Platte korrekt
erkannten und partitionierten, dachte ich, daß das eigentlich
Hi,
Andreas Hoppe wrote:
neulich habe ich versucht, in einen Rechner, von dem ich nur weiß, daß er
einen Intel 440LX-Chipsatz hat (erstes Aldi-Modell von 1998) eine
60GB-Festplatte einzubauen. Da Partition-Magic und cfdisk die Platte korrekt
erkannten und partitionierten, dachte ich, daß das
Andreas Hoppe schrieb:
Der Rechner bleibt nach ca. 1h komplett stehen (kein X, Cursor auf
der Console steht) und ist nicht mehr bedienbar. nach Entfernen der
Platte scheint alles wieder zu funktionieren.
Das sollte nichts mit der Grösse zu tun haben. Zur Sicherheit könntest
Du nochmal auf
On Thu, Jul 15, 1999 at 12:57:32PM +0300, virtanen wrote:
I've got a problem. Installed slink base on the same IDE disk as win95.
Otherwise it works, but. When I tried to install or copy some deb-files
from the FAT partition (mounted) into debian partitions, the whole thing
crashes at once.
I've got a problem. Installed slink base on the same IDE disk as win95.
Otherwise it works, but. When I tried to install or copy some deb-files
from the FAT partition (mounted) into debian partitions, the whole thing
crashes at once. The power goes off of the box.
It must have something to do
Michael E. Touloumtzis wrote:
On Tue, Mar 09, 1999 at 06:39:54PM +0100, Simone Rapizzi wrote:
I've just installed Linux, but I can't use LILO:
When I reboot I see:
L 01 01 01 01 01 01 01 01 01 and so on.
Unlikely a BIOS problem. Have you installed LILO in the MBR? Try
re
Hi,
I've just installed Linux, but I can't use LILO:
When I reboot I see:
L 01 01 01 01 01 01 01 01 01 and so on.
Does anybody know why?
I have Win98 on my primary HD and I've installed Linux on the first
partition of my third HD.
Thanks.
Simone Rapizzi
To: Debian Mailing List
Subject: Bios Problem
Hi,
I've just installed Linux, but I can't use LILO:
When I reboot I see:
L 01 01 01 01 01 01 01 01 01 and so on.
Does anybody know why?
I have Win98 on my primary HD and I've installed Linux on the first
partition of my third HD
On Tue, Mar 09, 1999 at 06:39:54PM +0100, Simone Rapizzi wrote:
I've just installed Linux, but I can't use LILO:
When I reboot I see:
L 01 01 01 01 01 01 01 01 01 and so on.
Unlikely a BIOS problem. Have you installed LILO in the MBR? Try
re-installing LILO with the addition
23 matches
Mail list logo
