How to set up ISA SCSI card.

2000-11-27 Thread Terry Hancock
Briefly, does anyone know how to set up a jumpered ISA SCSI card properly? I have the I/O and IRQ settings on the card, but don't know where to put the information. The card itself (Adaptec 1502) is listed in the Linux Hardware HOWTO as supported, but I don't know what modules to load, what

Re: How to set up ISA SCSI card.

2000-11-27 Thread Gary Hennigan
Terry Hancock [EMAIL PROTECTED] writes: Briefly, does anyone know how to set up a jumpered ISA SCSI card properly? I have the I/O and IRQ settings on the card, but don't know where to put the information. You first need to figure out what module you need. The Hardware HOWTO was the right

Re: How to set up ISA SCSI card.

2000-11-27 Thread Michael Smith
Hi I have an AVA1505, which is similar. What you do is set the jumpers. The module you should use is the aha152x module. The problem with both of these cards is that they don't have on-board BIOS's and therefore do not auto-probe when the module is installed, so you have to set up the module