FATAL ERROR: inserting ext3
(lib/modules/2.6.4-1-386/kernel/fs/ext3/ext3.ko) : Invalid module format
*snip*
Sounds like a mismatch between kernel and module versions. Are you
sure you installed the modules? Are you sure you are booting the
new kernel and not the old ones? Trying moving
SIG 11 es una referencia a una área de memoria inválida. Hacé un
memtest, podría hacer un problema con la memoria.
Pero puede ser el kernel :)
Saludos
On Thu, Oct 16, 2003 at 07:42:01PM +0200, gustavo wrote:
Perdon me referia al kernel 2.6-test7 (o test 2) y no al kerel
2.4.6-test7
Perdon me referia al kernel 2.6-test7 (o test 2) y no al kerel
2.4.6-test7
gustavo wrote:
Hola
Hace unos dias instale el kernel 2.4.6-test2 para debian. El kernel
subio pero tuve algunos problemas con
el apm y otras cosas. Algunos problemas fueron resultado de mala
configuracion y
Actually, I just had a similar problem tonight when I tried to recompile
my kernel and forgot to include the SCSI kernel module for my Adaptec
card. Did you get all the correct modules in your kernel for your
hardware?
Also, from the message about appending a correct root boot option, you
may
Matt, when you get to the lilo prompt, type linux single this will get you
into maintenance mode. (kind of lke safe mode in windows). Then type
cfdisk look for which partition says linux and look at the device
/dev/ Then quit that, edit /etc/lilo.conf and look for the line
root=... and change
Am 17. Jul, 2001 schwäzte Matt Jones so:
I have a problem. I have been trying to get the recent version of the kernel
into my box. I am a relatively new user so I have not done this before. I
used a kernel-update guide and followed all the directions and everything
worked fine until I
Am 17. Jul, 2001 schwäzte George so:
Matt, when you get to the lilo prompt, type linux single this will get
you into maintenance mode. (kind of lke safe mode in windows). Then type
cfdisk look for which partition says linux and look at the device
/dev/ Then quit that, edit /etc/lilo.conf
hey, I saw this once on my progeny 1.0 when I tried
to boot the experimental 2.4.(2)? (the one that came on the second
cd)
and it stopped right at the fdc message sometimes, or just
at the next message, which was eth0... (it's an rtl 8029)
I think the problem is around here...
dragos
Bostjan
On Wed, 04 Jul 2001 19:38:50 Wayne Topa wrote:
Subject: Re: Kernel 2.4.6 won't boot
Date: Thu, Jul 05, 2001 at 12:58:37AM +0200
In reply to:Viktor Rosenfeld
Quoting Viktor Rosenfeld([EMAIL PROTECTED]):
Bostjan Muller wrote:
Hi!
I have just found out
On Wed, 04 Jul 2001 19:38:50 Wayne Topa wrote:
Subject: Re: Kernel 2.4.6 won't boot
Date: Thu, Jul 05, 2001 at 12:58:37AM +0200
In reply to:Viktor Rosenfeld
Quoting Viktor Rosenfeld([EMAIL PROTECTED]):
Bostjan Muller wrote:
Hi!
I have just found out
On Wed, 4 Jul 2001, Bostjan Muller wrote:
Hi!
I have just found out that kernel 2.4.6 won't boot on my pentium 200 MMX
machine. The same has allready happened with kernel 2.4.6-pre8, but I thought
it will be fixed later when stable release comes out. The same kernel boots
just ok on my
So I agree, the network is where you need to look.
Donald Becker, ethernet expert, apparently still works in the arena of the
older (legacy) kernel 2.2.* .
Jeff Garzik, who now does much of the ethernet kernel work, has made many
changes.
Jeff is very active, making many changes and
On Wed, 4 Jul 2001, Bostjan Muller wrote:
Hi!
I have just found out that kernel 2.4.6 won't boot on my pentium 200 MMX
machine. The same has allready happened with kernel 2.4.6-pre8, but I thought
it will be fixed later when stable release comes out. The same kernel boots
just ok on my
On Wed, Jul 04, 2001 at 07:31:30PM +0200, Bostjan Muller wrote:
Hi!
I have just found out that kernel 2.4.6 won't boot on my pentium 200 MMX
machine. The same has allready happened with kernel 2.4.6-pre8, but I thought
it will be fixed later when stable release comes out. The same kernel
On Wed, Jul 04, 2001 at 12:52:35PM -0500, ktb wrote:
On Wed, Jul 04, 2001 at 07:31:30PM +0200, Bostjan Muller wrote:
Hi!
I have just found out that kernel 2.4.6 won't boot on my pentium 200 MMX
machine. The same has allready happened with kernel 2.4.6-pre8, but I
thought
it will be
Bostjan Muller wrote:
Hi!
I have just found out that kernel 2.4.6 won't boot on my pentium 200 MMX
machine. The same has allready happened with kernel 2.4.6-pre8, but I thought
it will be fixed later when stable release comes out. The same kernel boots
just ok on my toshiba p75 laptop.
Subject: Re: Kernel 2.4.6 won't boot
Date: Thu, Jul 05, 2001 at 12:58:37AM +0200
In reply to:Viktor Rosenfeld
Quoting Viktor Rosenfeld([EMAIL PROTECTED]):
Bostjan Muller wrote:
Hi!
I have just found out that kernel 2.4.6 won't boot on my pentium 200 MMX
machine
17 matches
Mail list logo
