Sandra Escandor sescan...@evertz.com writes:
So, to get more specific with my question: If the raid10 module has
disabled sdc, why is there a kernel log message after recovery that
still involves sdc - no one should be talking to sdc, correct? I've
attached a kernel log snippet. I can post
Lance Hoffmeyer [EMAIL PROTECTED] [2003-01-09 18:29:42 -0600]:
During boot I keep getting:
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: could not lock [dev 08:01], zero-size? Marking faulty.
What is this? If I determine I don't need it how do I
remove it in the kernel?
As
On Thu, Jan 09, 2003 at 06:29:42PM -0600, Lance Hoffmeyer wrote:
During boot I keep getting:
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: could not lock [dev 08:01], zero-size? Marking faulty.
What is this? If I determine I don't need it how do I
remove it in the kernel?
On Thu, Jan 09, 2003 at 06:29:42PM -0600, Lance Hoffmeyer wrote:
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: could not lock [dev 08:01], zero-size? Marking faulty.
What is this? If I determine I don't need it how do I
remove it in the kernel?
Multiple-disk device driver. I
hello Rodrigo:
I've never seen problems with a floppy before. Thats a good one.
Try booting a DOS floppy if you can to see what happens.
Try resetting the CMOS to the manufacturers defaults. You may also
try removing the two hard drives on your second IDE chain for the install.
You can
Try booting a DOS floppy if you can to see what happens.
I've been using all this time Windows on this computer, and the floppy works
perfectly well. Usually, I start the installation process by booting with a
DOS disk, and then executing boot.bat from the cd.
Try resetting the CMOS to the
It doesn't seen to be a floppy problem but the md-driver seems to hang.
Sorry for me being stupid, but what exactly is the MD-driver?
Thanks very much
The Multiple-Device-Driver for HD-Mirroring and Striping
So, what does this mean? What should I change in the BIOS or wherever?
Have you ran badblocks on /dev/hda4 ?
Thats what was reporting the error
Salutacions, Pere __o mailto:[EMAIL PROTECTED]
2:343/108.91 - _`\;_ http://casal.upc.es/~pere/
PGP key available --- (_)/ (_)Lo importante es el concepto
Hi!
If anybody sent replies to my reply about the re:, please send
them again. I accidentally deleted them.
Thanks.
Salutacions, Pere __o mailto:[EMAIL PROTECTED]
2:343/108.91 - _`\;_ http://casal.upc.es/~pere/
PGP key available ---
/dev/hda4 is a 3.3G linux partition \
/dev/sda1 is a 4.0G (whole drive) |
/dev/sdb1 is a 4.0G (whole drive) |
/dev/sdc1 is a 2.0G (whole drive)/
I don't have the documents right here, but are you sure that the
md drive can handle 13.3 GB partition?
3 months ago I put
11 matches
Mail list logo
