Re: Sound input source detected but not capturing

2021-09-13 Thread Thomas Amm
On Fri, 2021-09-03 at 22:52 +0530, Pankaj Jangid wrote: > I have a fresh Bullseye installation on a laptop. Sound output is > working. But the input is not working. The device is detected. > > --8<---cut here---start->8--- > $ arecord -l > List of CAPTURE

Re: Sound input source detected but not capturing

2021-09-12 Thread Andrei POPESCU
On Sb, 04 sep 21, 12:58:14, Marko Randjelovic wrote: > On Sat, 04 Sep 2021 07:47:02 +0530 > Pankaj Jangid wrote: > > > > Output of ‘amixer -c0’ > > > > --8<---cut here---start->8--- > > $ cat /proc/asound/cards > > 0 [PCH]: HDA-Intel - HDA Intel

Re: Sound input source detected but not capturing

2021-09-04 Thread Pankaj Jangid
Marko Randjelovic writes: > Your control 'Capture',0 is turned on and volume is at maximum, so > that's fine, but you don't have 'input source' control. On my machine > output of 'amixer -c0' gives among other controls the following: > > Simple mixer control 'Input Source',0 > Capabilities:

Re: Sound input source detected but not capturing

2021-09-04 Thread Pankaj Jangid
"Andrew M.A. Cater" writes: > Very new laptop? Does it need Intel firmware for the soundcard? > firmware-intel-sound from non-free? > > https://packages.debian.org/bullseye/firmware-intel-sound Thanks for the advice, Andy. I just tried it. But this did not work. I even rebooted the system

Re: Sound input source detected but not capturing

2021-09-04 Thread Marko Randjelovic
On Sat, 04 Sep 2021 07:47:02 +0530 Pankaj Jangid wrote: > Marko Randjelovic writes: > > > Did you make sure: > > > > 1. correct device is set to record from > > 2. recording is enabled > > 3. input volume is large enough > > I guess I have only one device so there is nothing to set. I

Re: Sound input source detected but not capturing

2021-09-04 Thread Andrew M.A. Cater
On Fri, Sep 03, 2021 at 10:52:45PM +0530, Pankaj Jangid wrote: > I have a fresh Bullseye installation on a laptop. Sound output is > working. But the input is not working. The device is detected. > > --8<---cut here---start->8--- > $ arecord -l > List of

Re: Sound input source detected but not capturing

2021-09-03 Thread Pankaj Jangid
Marko Randjelovic writes: > Did you make sure: > > 1. correct device is set to record from > 2. recording is enabled > 3. input volume is large enough I guess I have only one device so there is nothing to set. How is recording enabled? Do I need to add myself to some group? I am member of

Re: Sound input source detected but not capturing

2021-09-03 Thread Marko Randjelovic
On Fri, 3 Sep 2021 20:48:52 +0200 Marko Randjelovic wrote: > If you are not sure send the output of command 'amixer' so we can check. In fact, unless you have only one sound device, the command should be 'amixer -cN' where N is the number of your sound card and can change after reboot. So first

Re: Sound input source detected but not capturing

2021-09-03 Thread Marko Randjelovic
On Fri, 03 Sep 2021 22:52:45 +0530 Pankaj Jangid wrote: > I have a fresh Bullseye installation on a laptop. Sound output is > working. But the input is not working. The device is detected. > > --8<---cut here---start->8--- > $ arecord -l > List of

Sound input source detected but not capturing

2021-09-03 Thread Pankaj Jangid
I have a fresh Bullseye installation on a laptop. Sound output is working. But the input is not working. The device is detected. --8<---cut here---start->8--- $ arecord -l List of CAPTURE Hardware Devices card 0: PCH [HDA Intel PCH], device 0: ALC236