On 23 Apr 2013, Paul Condon wrote:
I have a rather complicated CUPS printing setup, which works,
mostly, but not entirely:
My printer is an old HP 5MP, laser printer, which I purchased before
HP invented the word laserjet because I was committed to Macintosh
back then and the HP 5MP offered
parallel port) , I made the older computer into a 'print server',
serving 'printing' over my LAN. It has worked well, except for times
when new print software was released and I had to configure the CUPS
soft ware. I have great difficulty comprehending CUPS.
My problem is that CUPS software does
well, except for times
when new print software was released and I had to configure the CUPS
soft ware. I have great difficulty comprehending CUPS.
My problem is that CUPS software does not handle .pdf files easily. If I
try to print file, zyx.pdf, by typing lpr zyx.pdf , the command is
accepted
* Paul Condon pecond...@gmail.com [130423 14:30]:
...
My problem is that CUPS software does not handle .pdf files easily.
If I try to print file, zyx.pdf, by typing lpr zyx.pdf , the
command is accepted, the light
flashes on the printer and after a while a piece of paper comes out
ware. I have great difficulty comprehending CUPS.
My problem is that CUPS software does not handle .pdf files easily. If I
try to print file, zyx.pdf, by typing lpr zyx.pdf , the command is
accepted, the light
flashes on the printer and after a while a piece of paper comes out of
the printer
luck (and successful printing!)
Printing is a hard problem. CUPS is generally
easy to administer. I used to use lprng and one of those
filters. Sometimes you have to jiggle things a bit to get them to
settle down. :-)
Hi Joel,
I checked and cupsys is a member of group lp.
I now have:
drwx--x
On Jan 2, 5:10 pm, Douglas A. Tutty dtu...@vianet.ca wrote:
The drivers are likely ppd files for use of cups-type stuff. The only
cups filter in foomatic-printfilters. Note that you can use foomatic
with lpd or lprng. If your problem is the spooling and not the
filtering, that may be the
On Jan 1, 9:10 am, Douglas A. Tutty dtu...@vianet.ca wrote:
On Thu, Jan 01, 2009 at 05:20:20AM -0800, Zach wrote:
On Dec 31 2008, 7:10 pm, Bob McGowan bob_mcgo...@symantec.com wrote:
I tried web interface as root and normal user, I tried running gnome-
cups-manager, I even tried running
/spool/cups/tmp
If the ownership is not corret, use chown:
# chown root.lp /var/spool/cups
# chown root.lp /var/spool/cup/tmp
Good luck (and successful printing!)
Printing is a hard problem. CUPS is generally
easy to administer. I used to use lprng and one of those
filters
On Fri, Jan 02, 2009 at 11:35:43AM -0800, Zach wrote:
On Jan 1, 9:10 am, Douglas A. Tutty dtu...@vianet.ca wrote:
On Thu, Jan 01, 2009 at 05:20:20AM -0800, Zach wrote:
On Dec 31 2008, 7:10 pm, Bob McGowan bob_mcgo...@symantec.com wrote:
I tried web interface as root and normal user, I
On Dec 31 2008, 7:40 pm, Ken Irving fn...@uaf.edu wrote:
It should be sufficient to be a member of group lpadmin; there's no need
to be root to manage CUPS, in my experience.
I verified my normal user is in the group lpadmin but it still doesn't
work.
Zach
--
To UNSUBSCRIBE, email to
On Dec 31 2008, 7:10 pm, Bob McGowan bob_mcgo...@symantec.com wrote:
snip
Not sure what that would mean, so I can't provide any help there.
But, when I run the browser based GUI, I do it as me, not root. Then,
when I do something that requires root permission to perform, the GUI
pops up a
On Thu, Jan 01, 2009 at 05:20:20AM -0800, Zach wrote:
On Dec 31 2008, 7:10 pm, Bob McGowan bob_mcgo...@symantec.com wrote:
I tried web interface as root and normal user, I tried running gnome-
cups-manager, I even tried running lpadmin. It either says in the cups
log file I am not authorized
On Wed, 2008-12-31 at 16:42 -0500, Zach Uram wrote:
I am using http://localhost:631/admin and click Add Printer and select
HP960C and the hplip driver then when I apply it says: 413 Request
Entity Too Large
I am running firefox as root so I don't know why it is failing. I also
tried running
On Wed, Dec 31, 2008 at 04:04:23PM -0800, Bob McGowan wrote:
On Wed, 2008-12-31 at 16:42 -0500, Zach Uram wrote:
I am using http://localhost:631/admin and click Add Printer and select
HP960C and the hplip driver then when I apply it says: 413 Request
Entity Too Large
I am running
On Sun, Jun 25, 2006 at 11:18:14AM -0400, Thomas H. George wrote:
The situation after recent Etch dist-upgrades of Xsane and Cups:
The following Cups commands
lp -d br printtest.txt
and
lpr -P br printtest.txt
work where br is defined by Cups as a Brothers HL-730 laser
Hallo Christoph,
vielen Dank für die Antwort - damit ist das Problem lösbar geworden. Dies sind
die letzten Zeilen, die
strace openoffice
vor dem Einfrieren geliefert hat:
...
poll([{fd=22, events=POLLIN}], 1, 5000) = 0
gettimeofday({1129753549, 491473}, NULL) = 0
poll([{fd=22,
Vinicius Massuchetto wrote:
I installed CUPS and ran the daemon, also added my HP Deskjet 680c to
the system, but the printer doesn't print.
When I go to Completed Jobs it says all of them were cancelled.
See if http://chefacciamo.xwiki.com/xwiki/bin/view/Debian/CUPS can help
you
Hallo!
Mein Problem hat sich mindestens vorläufig erledigt. Der i550 druckt mit den
Pixus-Treibern und Cups... *juh* :D
Gruss
Jonas
--
Never for me the lowered banner, never the last endeavour.
- Sir Ernest Shackleton
Aloow From 127.0.0.1
^
bitte überprüfen: Es muß Allow heißen!
Stimmt, Tippfehler.
Allow From 127.0.0.1
Allow From 192.168.0.0/24
Dann dürfte eigentlich alles funktionieren.
Sicher? Der Rechner bekommt seine IP dynamisch vom Router mit DHCP.
Gruß Steffen
Am 28.01.2005 um 19:30 Uhr schrieb Steffen Krapp [EMAIL PROTECTED]:
Aloow From 127.0.0.1
^
bitte überprüfen: Es muß Allow heißen!
Stimmt, Tippfehler.
Allow From 127.0.0.1
Allow From 192.168.0.0/24
Dann dürfte eigentlich alles funktionieren.
Sicher? Der Rechner
Hallo Steffen,
Steffen Krapp, 28.01.2005 (d.m.y):
Aloow From 127.0.0.1
^
bitte überprüfen: Es muß Allow heißen!
Stimmt, Tippfehler.
Allow From 127.0.0.1
Allow From 192.168.0.0/24
Dann dürfte eigentlich alles funktionieren.
Sicher? Der Rechner bekommt seine IP
Zumindest hier hättest du etwas kürzen dürfen:/
Sorry, mach ich nächstes Mal.
Zufällig 'PreserveJobFiles Yes' in der cupsd.conf stehen? Du kannst
die Dateien aus /var/spool/cups/d... löschen, wenn du sie nicht mehr
benötigst. Und setze am besten auch gleich 'PreserveJobFiles No'.
Nein, in
Wichtig ist der Abschnitt zwischen Location / und /Location in
/etc/cups/cupsd.conf.
Dort steht bei mir folgendes:
--schnipp
Location /
Order Deny,Allow
Deny From All
Aloow From 127.0.0.1
/Location
--schnapp
Gruß Steffen
Am 28.01.2005 um 13:11 Uhr schrieb Steffen Krapp [EMAIL PROTECTED]:
Wichtig ist der Abschnitt zwischen Location / und /Location in
/etc/cups/cupsd.conf.
Dort steht bei mir folgendes:
--schnipp
Location /
Order Deny,Allow
Deny From All
Aloow From 127.0.0.1
^
bitte überprüfen:
Steffen Krapp wrote:
Steht etwas in der Logdatei? Schon mal versucht den LogLevel zu
erhöhen? Hint: LogLevel und ErrorLog in der cupsd.conf.
Ich bin Newbie. In welcher Log-Datei soll ich denn nachschauen?
http://www.danka.de/printpro/node12.html, speziell 11.12 sollte dir helfen.
Ich
Hast du den LogLevel erhöht, 'cups reload' ausgeführt und danach einen
Druck gestartet?
Schau dir danach die error_log an. Die Zeilen zum Druckauftrag
solltest du anhand Datum/Uhrzeit leicht am Ende der Datei finden
können (200 Zeilen pro Auftrag im Debug-Modus!).
So, ich habe den LogLevel
On Thu, Jan 27, 2005 at 02:07:14PM +0100, Steffen Krapp wrote:
Ansonsten lese ich in den letzten Zeilen das sowohl root als auch sk nicht
zugelassen sind. In der printers.conf steht aber doch in der letzten Zeile:
AllowUser all.
printers.conf in dem Zusammenhang unintressant.
Wichtig ist der
Hallo Steffen,
Steffen Krapp, 27.01.2005 (d.m.y):
So, ich habe den LogLevel auf debug gesetzt, dann /etc/init.d/cupsys
restart ausgeführt und anschließend sowohl unter meinem Benutzernamen
als auch als root einen Druckauftrag gestartet. Folgendes erscheint in
der error_log (alle Einträge von
Steffen Krapp wrote:
So, ich habe den LogLevel auf debug gesetzt, dann /etc/init.d/cupsys
restart ausgeführt und anschließend sowohl unter meinem Benutzernamen
als auch als root einen Druckauftrag gestartet. Folgendes erscheint in
der error_log (alle Einträge von heute):
--schnipp
[...]
D
On Sat, 22 Jan 2005 09:22:01 +0100
Steffen Krapp [EMAIL PROTECTED] wrote:
On Fri, 21 Jan 2005 22:29:11 +0100
Steffen Krapp [EMAIL PROTECTED] wrote:
Fehlermeldung: client-error-not-possible[...]
Kann mir einer helfen, wie ich CUPS wieder als User
starten kann.
Leider habe ich das
Steffen Krapp wrote:
On Sat, 22 Jan 2005 09:22:01 +0100
Steffen Krapp [EMAIL PROTECTED] wrote:
On Fri, 21 Jan 2005 22:29:11 +0100
Steffen Krapp [EMAIL PROTECTED] wrote:
Fehlermeldung: client-error-not-possible[...]
Kann mir einer helfen, wie ich CUPS wieder als User
starten kann.
Steht etwas in der Logdatei? Schon mal versucht den LogLevel zu
erhöhen? Hint: LogLevel und ErrorLog in der cupsd.conf.
Ich bin Newbie. In welcher Log-Datei soll ich denn nachschauen? Ich
vermute mal error_log. Die ist ziemlich groß und ich finde da nichts,
was mir weiterhilft. Ist keine
On Fri, 21 Jan 2005 22:29:11 +0100
Steffen Krapp [EMAIL PROTECTED] wrote:
Fehlermeldung: client-error-not-possible[...]
Kann mir einer helfen, wie ich CUPS wieder als User
starten kann.
Ich habe es wieder hinbekommen. Zuerst habe ich mit apt-get --reinstall
CUPS nez installiert. Dabei habe
On Sunday 21 November 2004 17:34, Andreas Ehn wrote:
Hi,
I'm using CUPS (cupsys-1.1.20final+rc1-10) in Sarge and have a problem
using any functions that require authentication.
If I want to print a document using lp, I have to enter my password
three times before it is accepted. If I want
On Sunday 21 November 2004 18:03 -0600, Tim Kelley wrote:
It sounds like you have /jobs set to AuthType Basic / AuthClass User; which I
believe is the default.
Yes, you are right. I have now changed that to AuthType Digest, with the
result that I can now access /jobs.
I still have the same
hi all,
i've got debian sid 2.6.5 with CUPS 1.1.20 and a usb
printer, HP DeskJet 3550.
i added this printer using http://localhost/631, and
made the device URI as usb:/dev/usb/lp0.
but when i tried to print a test page CUPS said
Unable to open USB device usb:/dev/usb/lp0: No
such device
doing
Hallo,
seit einige Upgrades von cupsys wird beim Upgrade der cupsd zwar
beendet, aber nach der Installation des Upgrades nicht mehr
gestartet:
--
Richte cupsys ein (1.1.20final-3) ...
Installiere neue Version der Konfigurationsdatei
On Thu, Sep 18, 2003 at 03:34:23PM +0200, Tobias Hafner wrote:
Danach habe ich mal mit Opera in ein ps-File gedruckt und danach mit der
console versucht zu drucken. Hat aber genau den gleichen Fehler gegeben.
Danach mit ps2pdf in ein PDF gewandert- gleicher Fehler
Entweder die Programm
Hallo!
Ich habe folgendes Problem seit neuestem mit meinem Drucker unter
einem installierten Knoppix:
Wenn ich den computer starte und einen Druckauftrag erteile, tut sich
nichts.
Wenn ich localhost:631/printer kontrolliere ist der Drucker auf Stop
gesetzt.
Starte ich den Drucke über den Start
Dave Bartmess was roused into action on 09/16/02 23:10 and wrote:
Thanks, Nate, you pointed me in the right direction...
I took out the Listen lines, and put in a single Port 631 line. That
worked... Not sure at this point why I put in the Listen lines.. LOL
Musta read it somewhere...
On Mon, May 13, 2002 at 06:46:38PM +0200, Michael Schwind wrote:
i have Problems when i want to add a Printer, the command line tool and
the web interface will not work. After pressing the button where you can
choose the printer, the admin.cgi hangs with about 30% CPU-Time and cupsd
needs
[Please don't send user-specific problems to debian-devel.]
On Mon, 2002-05-13 at 11:46, Michael Schwind wrote:
i have Problems when i want to add a Printer, the command line tool and the
web
interface will not work. After pressing the button where you can choose the
printer,
the admin.cgi
On Tue, May 14, 2002 at 10:29:26AM -0500, Jeff Licquia wrote:
[Please don't send user-specific problems to debian-devel.]
On Mon, 2002-05-13 at 11:46, Michael Schwind wrote:
i have Problems when i want to add a Printer, the command line tool and the
web
interface will not work. After
] wrote:
Problem with cups and xpp or qtcups
To: debian-user@lists.debian.org
Subject: Problem with cups and xpp or qtcups
From: Giuseppe Fierro [EMAIL PROTECTED]
Date: Wed, 15 Nov 2000 00:25:26 +0100
Sender: [EMAIL PROTECTED]
Hello,
both xpp and qtcups give me same
Did you set 'Browsing' to 'on' in the /etc/cups/cupsd.conf? The package
maintainer set it to 'off' by default.
If yes, what is the output of 'lpstat -v -d'?
Hi,
Browsing is set to on and the output of 'lpstat -v -d' is
device for Epson_760: parallel:/dev/lp0
system default destination:
Giuseppe Fierro [EMAIL PROTECTED] writes:
both xpp and qtcups give me same message unable to connect to CUPS
server, check options but I don't know the options that I have to see.
I tried all options in the cupsd.conf file but nothing does.
Did you set 'Browsing' to 'on' in the
47 matches
Mail list logo