On Sun, Jun 03, 2007 at 01:14:37AM -0400, Kevin Mark wrote:
On Sun, Jun 03, 2007 at 04:45:30AM +, rocky wrote:
Hey,
I got a very old PC which was purchased 6 years ago. I use Debian
netinstall CD installed the base Debian etch system. I have been
trying to install basic GUI on it.
for some questions regarding to my hardware. I was not
quite sure whether my answer is right because I'm quite new to
computer hardware and I have no means to find the manuals for the old
PC.
After that the startx gave me the following errors
[QUOTE]X Window System Version 7.1.1
Release Date: 12 May
aptitude install twm x-window-system[/QUOTE]
I was asked for some questions regarding to my hardware. I was not
quite sure whether my answer is right because I'm quite new to
computer hardware and I have no means to find the manuals for the old
PC.
After that the startx gave me
Hey,
My debian stable installation works fine before we shifted our office.
Before shifting I did mv /etc/rc2.d/S99gdm to /etc/rc2.d/_S99gdm to
prevent the computer from starting X automatically. This morning
startx gave me the below error after debian logo showed off for about
10 seconds
On Fri, Jun 01, 2007 at 07:32:54AM +, rocky wrote:
My debian stable installation works fine before we shifted our office.
Before shifting I did mv /etc/rc2.d/S99gdm to /etc/rc2.d/_S99gdm to
prevent the computer from starting X automatically. This morning
startx gave me the below error
Am 2007-04-27 22:24:29, schrieb Bruffey, Mark:
Help. What do I need to do to get the mach64 module installed? Thanks,
Mark
- END OF REPLIED MESSAGE -
There is no module mach64 but a config option in xorg.
dpkg-reconfigure xorg
and then
Help. What do I need to do to get the mach64 module installed? Thanks,
Mark
L. Mark Bruffey
Director Library Services
Central Baptist Theological Seminary
900 Forestview Lane N
Plymouth MN 55441
763 417 8264 (Tel)
763 417 8258 (Fax)
[EMAIL PROTECTED]
Central Seminary www.centralseminary.edu
.
THank you once again..
Best Wishes..and have a nice time..
Ankur Patel.
On 2/14/07, cga2000 [EMAIL PROTECTED] wrote:
On Mon, Feb 12, 2007 at 03:56:05PM EST, Kent West wrote:
conn intel wrote:
USING $ startx $(which xterm) -- :6 , I am getting the blank screen
as said and using ctrl alt
On Mon, Feb 12, 2007 at 03:56:05PM EST, Kent West wrote:
conn intel wrote:
USING $ startx $(which xterm) -- :6 , I am getting the blank screen
as said and using ctrl alt backspace i am able to return back to the
command prompt.
Here is the output of 'lspci' attached with the email.
Note
On Sat, Feb 10, 2007 at 06:34:53PM -0500, cga2000 wrote:
Same as Kent says according to the Xfree86 log, it does not look like X
is having any kind of problem.
Try the following from a linux console:
$ startx $(which xterm) -- :6
Does anything happen?
If all you have is a blank
Hello Friends,
Thank You for your responses. I have work around what you all have said ::
USING $ startx $(which xterm) -- :6 , I am getting the blank screen as said
and using ctrl alt backspace i am able to return back to the command prompt.
Here is the output of 'lspci' attached
conn intel wrote:
USING $ startx $(which xterm) -- :6 , I am getting the blank screen
as said and using ctrl alt backspace i am able to return back to the
command prompt.
Here is the output of 'lspci' attached with the email.
Note :: I am getting vertical strips when default system boots
conn intel wrote:
Hello friends,
I am using debian for few yrs.but i havent seen such problem.. I have
installed it on pentium III machine and i could not able to do startx.
I am not getting graphical version. could anyone give their
suggestions..?
Here is the XF86config-4 , XFree86.0.log
On Sat, Feb 10, 2007 at 04:15:24PM EST, conn intel wrote:
Hello friends,
I am using debian for few yrs.but i havent seen such problem.. I have
installed it on pentium III machine and i could not able to do startx.
I am not getting graphical version. could anyone give
On Mon, 22 Jan 2007 18:04:15 +, Junior Polegato [EMAIL PROTECTED] wrote:
Rúben Lício escreveu:
Estou usando um fluxbox sem gerenciador de login, ou seja, o startx
chama ele no login que estiver o console.
Gostaria de saber como faço para por o startx no init do bash, para
que assim que
Bom dia,
já consegui fazer o startx automático após o login, e já consegui fazer o
login.
echo startx ~/.bashrc
e no /etc/inittab alterar algum dos ambientes tty para mingetty --autologin
nome-do-usuario
o resultado é que ao ligar a maquina, ele se loga automatico quando é
executado o inittab
Bomdia Junior,
Serve sim
Vou testar isso, e assim que tiver o resultado lhe informo.
Vlw,
Rúben
On 1/23/07, Junior Polegato [EMAIL PROTECTED] wrote:
Rúben Lício escreveu:
Bom dia,
já consegui fazer o startx automático após o login, e já consegui
fazer o login.
echo startx
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 01/22/2007 05:58 PM, Rúben Lício wrote:
Salve,
Estou usando um fluxbox sem gerenciador de login, ou seja, o startx
chama ele no login que estiver o console.
Gostaria de saber como faço para por o startx no init do bash, para que
assim que
MESSAGE-
Hash: SHA1
On 01/22/2007 05:58 PM, Rúben Lício wrote:
Salve,
Estou usando um fluxbox sem gerenciador de login, ou seja, o startx
chama ele no login que estiver o console.
Gostaria de saber como faço para por o startx no init do bash, para que
assim que logar já subir o fluxbox
Vlw, funcionou sua dica!
On 1/23/07, Junior Polegato [EMAIL PROTECTED] wrote:
Rúben Lício escreveu:
Bom dia,
já consegui fazer o startx automático após o login, e já consegui
fazer o login.
echo startx ~/.bashrc
e no /etc/inittab alterar algum dos ambientes tty para mingetty
Salve,
Estou usando um fluxbox sem gerenciador de login, ou seja, o startx chama
ele no login que estiver o console.
Gostaria de saber como faço para por o startx no init do bash, para que
assim que logar já subir o fluxbox, tentei .bash_init e .bash_initrc, mas
ambos não funcionaram.
Também
Rúben Lício escreveu:
Estou usando um fluxbox sem gerenciador de login, ou seja, o startx
chama ele no login que estiver o console.
Gostaria de saber como faço para por o startx no init do bash, para
que assim que logar já subir o fluxbox, tentei .bash_init e
.bash_initrc, mas ambos não
--- Javier Ruano [EMAIL PROTECTED] escribió:
[EMAIL PROTECTED] wrote:
Hola.
He le�do que xinit y startx hace uso de los archivos
~/.xsession y
~/.xinitrc, donde entre otras cosas deber�a estar el gestor de
ventanas o el entorno de escritorio que startx o xinit deberï
[EMAIL PROTECTED] wrote:
De acuredo, gracias. De paso, ya sé otro comando útil que desconocía
hasta ahora: locate.
Por cierto, esto me ha recordado un comando que aprendí una vez, pero
que por falta de uso olvidé cuál era, y más de una vez me habría
resultado útil... si me hubiera acordado. El
El lun, 15-01-2007 a las 15:45 +0100, [EMAIL PROTECTED]
escribió:
Por cierto, esto me ha recordado un comando que aprendí una vez, pero
que por falta de uso olvidé cuál era, y más de una vez me habría
resultado útil... si me hubiera acordado. El caso es que no sé dónde
lo vi (seguramente por
--- Iñigo Tejedor Arrondo [EMAIL PROTECTED] escribió:
El lun, 15-01-2007 a las 15:45 +0100, [EMAIL PROTECTED]
escribió:
Por cierto, esto me ha recordado un comando que aprendí una vez,
pero
que por falta de uso olvidé cuál era, y más de una vez me habría
resultado útil... si me
Hola.
He leído que xinit y startx hace uso de los archivos ~/.xsession y
~/.xinitrc, donde entre otras cosas debería estar el gestor de
ventanas o el entorno de escritorio que startx o xinit deberían
iniciar. Sin embargo, he buscado estos archivos en mi directorio home
y no los he encontrado
El dom, 14-01-2007 a las 13:36 +0100, [EMAIL PROTECTED]
escribió:
Hola.
He leído que xinit y startx hace uso de los archivos ~/.xsession y
~/.xinitrc, donde entre otras cosas debería estar el gestor de
ventanas o el entorno de escritorio que startx o xinit deberían
iniciar. Sin embargo, he
[EMAIL PROTECTED] wrote:
Hola.
He le�do que xinit y startx hace uso de los archivos ~/.xsession y
~/.xinitrc, donde entre otras cosas deber�a estar el gestor de
ventanas o el entorno de escritorio que startx o xinit deber�an
iniciar. Sin embargo, he buscado estos archivos en mi directorio home
El dom, 14-01-2007 a las 13:36 +0100, [EMAIL PROTECTED]
escribió:
Hola.
He leído que xinit y startx hace uso de los archivos ~/.xsession y
~/.xinitrc, donde entre otras cosas debería estar el gestor de
ventanas o el entorno de escritorio que startx o xinit deberían
iniciar. Sin embargo, he
On Dec 28, 2006, at 12:29 PM, Andrew Sackville-West wrote:
/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID
(==) RgbPath set to /etc/X11/rgb
(**) ModulePath set to /usr/X11R6/lib/modules
^
that's where xorg is looking for the modules, but not
On Fri, Dec 29, 2006 at 11:33:19AM -0500, Rick Thomas wrote:
On Dec 28, 2006, at 12:29 PM, Andrew Sackville-West wrote:
/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID
(==) RgbPath set to /etc/X11/rgb
(**) ModulePath set to /usr/X11R6/lib/modules
Hi,
I'm using testing, after yesterday's xorg update, my X can't start anymore.
The error is: Failed to load module bitmap pcidata. Why is that?
How should I fix it?
$ ls -l /usr/lib/xorg/modules/fonts/libbitmap.so
/usr/lib/xorg/modules/libpcidata.so
-rw-r--r-- 1 root root 4525 11-24
On Thu, Dec 28, 2006 at 04:01:10PM +, T wrote:
Hi,
I'm using testing, after yesterday's xorg update, my X can't start anymore.
The error is: Failed to load module bitmap pcidata. Why is that?
How should I fix it?
$ ls -l /usr/lib/xorg/modules/fonts/libbitmap.so
On Thu, 28 Dec 2006 09:29:03 -0800, Andrew Sackville-West wrote:
I'm no expert, but based on the above (modules located in
/usr/lib/xorg/modules) and the below, I think I know the problem.
Bingo, thanks a lot Andrew.
I actually looked at the two for a few seconds before I asked, :-)
silly me,
Am 2006-11-11 11:02:51, schrieb Rodolfo Medina:
I installed the Sarge base system *and* the X system with:
No, you have only instaleld the core.
# apt-get install x-window-system-core gnome-core
It does not contain xbase-clients which contain startx
Better:
# apt-get install x-window
Simon Rocher wrote:
Acho que a mensagem:
Error: API mismatch: the NVIDIA kernel module has the version 1.0-7184,
but
this X module has the version 1.0-8776. Please make sure that the kernel
module and all NVIDIA driver components have the same version.
Jah nos da ideia do q estah rolando
reinstalar o driver novamente.
Espero ter ajudado.
Abracos
- Original Message
From: Fabio Guerrazzi [EMAIL PROTECTED]
To: debian-user-portuguese@lists.debian.org
Sent: Monday, November 13, 2006 2:50:13 PM
Subject: Re: Nvidia Erro ao tentar startx
Simon Rocher wrote:
Acho que
Olá pessoal, poderia alguém me ajudar?
auth: creating new authority file /home/alan/.serverauth.4518
X Window System Version 7.1.1
Release Date: 12 May 2006
X Protocol Version 11, Revision 0, Release 7.1.1
Build Operating System: Linux 2.6.15.7 i686
Current Operating System: Linux
PROTECTED]
To: debian-user-portuguese@lists.debian.org
Sent: Sunday, November 12, 2006 10:02:27 PM
Subject: Nvidia Erro ao tentar startx
Olá pessoal, poderia alguém me ajudar?
auth: creating new authority file /home/alan/.serverauth.4518
X Window System Version 7.1.1
Release Date: 12 May 2006
X
Tim Champion [EMAIL PROTECTED] writes:
did you ever figure this out?
http://people.debian.org/~terpstra/message/20061005.143543.58d45fb6.en.html
I'm having about the same problem, but with 3.1 sarge.
I installed the Sarge base system *and* the X system with:
# apt-get install
Tim Champion [EMAIL PROTECTED] writes:
did you ever figure this out?
http://people.debian.org/~terpstra/message/20061005.143543.58d45fb6.en.ht
ml
I'm having about the same problem, but with 3.1 sarge.
I guess you will first have to find out whether your Graphics Driver is
supported by
Mumia,
At Sun, 08 Oct 2006 13:24:21 -0500 you said,
What are you trying to do?
Just for interest, I want to understand how startx,
via several stages of indirection, starts xfce. I
appreciate the various suggestions but none have
been completely consistent with the system here
On 10/09/2006 01:14 AM, Peter Easthope wrote:
Mumia,
At Sun, 08 Oct 2006 13:24:21 -0500 you said,
What are you trying to do?
Just for interest, I want to understand how startx,
via several stages of indirection, starts xfce. I
appreciate the various suggestions but none have
been completely
Just for interest, I want to understand how startx,
via several stages of indirection, starts xfce. I
appreciate the various suggestions but none have
been completely consistent with the system here.
Does .xinitrc works?
Zoran
--
To UNSUBSCRIBE, email to [EMAIL
[EMAIL PROTECTED] wrote:
Kernel 2.6.17 and Etch are installed here
and startx invokes xfce, all OK.
But how does startx find xfce rather than
xpdf or another X client? man startx
remarks that it looks for .xinitrc in the
user's home directory. If that is not
found, it uses
Liam O'Toole wrote:
On Thu, 05 Oct 2006 10:29:33 -0700
Marc Shapiro [EMAIL PROTECTED] wrote:
I am currently running Sarge with XFree86. I have done a chroot
install of Etch with Xorg. When I boot into Sarge I run X with the
command:
startx -- :1.0 vt07 (through an alias)
and my wife
Mumia, Clive, Nyizsnyik and others,
Incidentally, I've not monkeyed with any of the
scripts. They are just as installed.
At Mon, 25 Sep 2006 09:56:38 -0500 Mumia W. Paduille said,
Debian uses its alternatives system. Startx (probably) invokes
/usr/X11/.../xinitrc which (probably) invokes /usr
On (08/10/06 08:08), Peter Easthope wrote:
Incidentally, I've not monkeyed with any of the
scripts. They are just as installed.
At Mon, 25 Sep 2006 09:56:38 -0500 Mumia W. Paduille said,
Debian uses its alternatives system. Startx (probably) invokes
/usr/X11/.../xinitrc which (probably
On 10/08/2006 10:08 AM, Peter Easthope wrote:
Mumia, Clive, Nyizsnyik and others,
Incidentally, I've not monkeyed with any of the
scripts. They are just as installed.
At Mon, 25 Sep 2006 09:56:38 -0500 Mumia W. Paduille said,
Debian uses its alternatives system. Startx (probably) invokes
On Thu, 05 Oct 2006 10:29:33 -0700
Marc Shapiro [EMAIL PROTECTED] wrote:
I am currently running Sarge with XFree86. I have done a chroot
install of Etch with Xorg. When I boot into Sarge I run X with the
command:
startx -- :1.0 vt07 (through an alias)
and my wife uses
startx -- :0.0
DVD's to sources.list, then did
'apt-get update' and then `apt-get dist-upgrade'. Do you Debian users think
it's all right?
But now, X won't start. I installed x-window-system and gnome, but when I do:
`$ startx' I get the error message
I am currently running Sarge with XFree86. I have done a chroot install
of Etch with Xorg. When I boot into Sarge I run X with the command:
startx -- :1.0 vt07 (through an alias)
and my wife uses
startx -- :0.0 vt08
That way we can each have seperate X sessions open at the same time
Bjr.
Troll inside ? Un dimanche ?
++
-Message d'origine-
De : Yves Rutschle [mailto:[EMAIL PROTECTED]
Envoyé : dimanche 1 octobre 2006 19:02
À : debian-user-french@lists.debian.org
Objet : Re: bug survenu d'un coup m'empechant de lancer
startx en debian
etch sur laptop
(...)
Je
Le 13422ième jour après Epoch,
Thierry B. écrivait:
Thierry B a écrit :
Bonjour,
Je vous ecris car j'ai un bug qui survient d'un coup quand je lance
[... Suppression de 2425 lignes...]
Desolé
J'avais mis un truc là dans le .xsession lol,et c'est ca qui bugait,
donc voila, il n'y a pas
On Sun, Oct 01, 2006 at 05:34:35PM +0200, François TOURDE wrote :
C'est pas la fausse alerte qui gêne le plus, c'est que tu te quote
toi-même en conservant l'intégralité du gros truc posté, et que tu
répondes à la fin...
Répondre à la fin, c'est mieux, ça pète le sens de la conversation. Par
Le 13422ième jour après Epoch,
[EMAIL PROTECTED] écrivait:
On Sun, Oct 01, 2006 at 05:34:35PM +0200, François TOURDE wrote :
C'est pas la fausse alerte qui gêne le plus, c'est que tu te quote
toi-même en conservant l'intégralité du gros truc posté, et que tu
répondes à la fin...
Répondre à
On Sun, Oct 01, 2006 at 05:34:35PM +0200, François TOURDE wrote:
C'est pas la fausse alerte qui gêne le plus, c'est que tu te quote
toi-même en conservant l'intégralité du gros truc posté, et que tu
répondes à la fin...
Je croyais qu'il _fallait_ répondre à la fin? Il faut
répondre au début du
On Sun, 2006-09-24 at 21:21 -0700, [EMAIL PROTECTED] wrote:
Kernel 2.6.17 and Etch are installed here
and startx invokes xfce, all OK.
But how does startx find xfce rather than
xpdf or another X client? man startx
remarks that it looks for .xinitrc in the
user's home directory
Milou-duf a écrit :
Le Tue, 26 Sep 2006 07:44:34 +0200
Thierry B [EMAIL PROTECTED] à écrit:
Bonjour,
Bonjour,
quand je tape startx, pour lancer kde, j'ai un message d'erreur de Xorg
concernant mon clavier.
Je pense que ca vient de la mise à jour d'hier.
Vérifie que tu as bien le paquet
Bonjour,
quand je tape startx, pour lancer kde, j'ai un message d'erreur de Xorg
concernant mon clavier.
Je pense que ca vient de la mise à jour d'hier.
Voici le log:
X Window System Version 7.0.0
Release Date: 21 December 2005
X Protocol Version 11, Revision 0, Release 7.0
Build Operating
Le Tue, 26 Sep 2006 07:44:34 +0200
Thierry B [EMAIL PROTECTED] à écrit:
Bonjour,
Bonjour,
quand je tape startx, pour lancer kde, j'ai un message d'erreur de Xorg
concernant mon clavier.
Je pense que ca vient de la mise à jour d'hier.
Vérifie que tu as bien le paquet xserver-xorg-input
Kernel 2.6.17 and Etch are installed here
and startx invokes xfce, all OK.
But how does startx find xfce rather than
xpdf or another X client? man startx
remarks that it looks for .xinitrc in the
user's home directory. If that is not
found, it uses the file xinitrc in the
xinit
On (24/09/06 21:21), [EMAIL PROTECTED] wrote:
Kernel 2.6.17 and Etch are installed here
and startx invokes xfce, all OK.
But how does startx find xfce rather than
xpdf or another X client? man startx
remarks that it looks for .xinitrc in the
user's home directory
On Sun, 24 Sep 2006 21:21:35 -0700
[EMAIL PROTECTED] wrote:
Kernel 2.6.17 and Etch are installed here
and startx invokes xfce, all OK.
But how does startx find xfce rather than
xpdf or another X client? man startx
remarks that it looks for .xinitrc in the
user's home directory
On 09/24/2006 11:21 PM, [EMAIL PROTECTED] wrote:
Kernel 2.6.17 and Etch are installed here
and startx invokes xfce, all OK.
But how does startx find xfce rather than
xpdf or another X client? man startx
remarks that it looks for .xinitrc in the
user's home directory
buenas:Cuando
quiero ejecutar en mi debian sarge 3.1 con xserver-xfree86 y
gnome-core.no puedo utilizar el comando startx para levantar las
X...ya que me dice que no reconoce el comandoque puedo hacer..???
Xinit? según tengo entendido startx emplea Xinit. Tambien puede ser que no lo
On Mon, Sep 04, 2006 at 08:48:45PM -0700, moraca wrote:
buenas:
Cuando quiero ejecutar en mi debian sarge 3.1 con xserver-xfree86 y
gnome-core.no puedo utilizar el comando startx para levantar las X...ya
que me dice que no reconoce el comando
que puedo hacer..???
Tienes
El lun, 04 de sep de 2006, a las 08:48:45 -0700, moraca dijo:
buenas:
Cuando quiero ejecutar en mi debian sarge 3.1 con xserver-xfree86 y
gnome-core.no puedo utilizar el comando startx para levantar las X...ya
que me dice que no reconoce el comando
que puedo hacer
Bueno no lo tengo instaladoel xbase-clientes,
cual seria el procedimiento a seguir..por favor..!!
saludos
_
Create tu cuenta de webmail en www.esdebian.org
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of
El mar, 05 de sep de 2006, a las 05:51:38 -0700, moraca dijo:
Bueno no lo tengo instaladoel xbase-clientes,
cual seria el procedimiento a seguir..por favor..!!
instalarlo, obviamente
saludos
_
Create tu cuenta de
moraca escribió:
buenas:
Cuando quiero ejecutar en mi debian sarge 3.1 con xserver-xfree86 y
gnome-core.no puedo utilizar el comando startx para levantar las X...ya que
me dice que no reconoce el comando
que puedo hacer..???
saludos
buenas:
Cuando quiero ejecutar en mi debian sarge 3.1 con xserver-xfree86 y
gnome-core.no puedo utilizar el comando startx para levantar las X...ya que
me dice que no reconoce el comando
que puedo hacer..???
saludos
2006/8/22, Kent West [EMAIL PROTECTED]:
JerryKwok wrote:
I just installde the Debian Sarge basic system and
x-window-system,kde-core,nvidia driver,and startx but failed(either
root or common account).
Section Device
IdentifierNVIDIA Corporation NV17 [GeForce4 MX 440]
Driver
On Wed, Aug 23, 2006 at 23:53:10 +0800, JerryKwok wrote:
2006/8/22, Kent West wrote
JerryKwok wrote:
I just installde the Debian Sarge basic system and
x-window-system,kde-core,nvidia driver,and startx but failed(either
root or common account).
Section Device
IdentifierNVIDIA
JerryKwok wrote:
2006/8/22, Kent West [EMAIL PROTECTED]:
JerryKwok wrote:
I just installde the Debian Sarge basic system and
x-window-system,kde-core,nvidia driver,and startx but failed(either
root or common account).
Section Device
IdentifierNVIDIA Corporation NV17 [GeForce4
I just installde the Debian Sarge basic system and
x-window-system,kde-core,nvidia driver,and startx but failed(either
root or common account).
I thought it was the monitor settings problem and ran
dpkg-reconfigure xserver-xfree86,but that didn't work.I don't have a
.xsession or .xinitrc file
JerryKwok wrote:
I just installde the Debian Sarge basic system and
x-window-system,kde-core,nvidia driver,and startx but failed(either
root or common account).
Section Device
IdentifierNVIDIA Corporation NV17 [GeForce4 MX 440]
Drivernvidia
EndSection
Unless I'm
Option Emulate3Buttons true Option Emulate3Timeout 70EndSectionAgrora esta td ok.
Obrigado a Todos!2006/8/17, Marcos Lazarini [EMAIL PROTECTED]
:
On 8/17/06, Adriano Maverick [EMAIL PROTECTED] wrote: Erro ao dar startx
Alguem pode me ajudar? Segue abaixo o log
X Window System Version 7.0.0
Adriano Maverick wrote:
Um novo erro com mouse, agora entro no fluxbox e esta tudo normal com
mouse,
mis qndo eu abro o Firefox, o mouse fica louco, fica muito rapido, alguem
pode me ajudar?
A opção no /etx/X11/xorg.conf esta assim:
Section InputDevice
IdentifierConfigured
On 8/17/06, Adriano Maverick [EMAIL PROTECTED] wrote:
Erro ao dar startx
Alguem pode me ajudar?
Segue abaixo o log
X Window System Version 7.0.0
Release Date: 21 December 2005
X Protocol Version 11, Revision 0, Release 7.0
Build Operating System:Linux 2.6.12-1-686 i686
Current Operating
[EMAIL PROTECTED]:
On 8/17/06, Adriano Maverick [EMAIL PROTECTED] wrote: Erro ao dar startx Alguem pode me ajudar? Segue abaixo o log
X Window System Version 7.0.0 Release Date: 21 December 2005 X Protocol Version 11, Revision 0, Release7.0 Build Operating System:Linux 2.6.12-1-686 i686 Current
or
monitor and card hardware same errors. I'm at a point where I'm using
dpkg-reconfigure xserver-xorg to try different adjustments. The startx
command returns fatal error and the number is 104. Fortunately this
installation isn't erroring out and trying to run when I boot this
computer
the
frame buffer or monitor and card hardware same errors. I'm at a point
where I'm using dpkg-reconfigure xserver-xorg to try different
adjustments. The startx command returns fatal error and the number is
104. Fortunately this installation isn't erroring out and trying to
run when I boot
unclutter -idle 1 -jitter 2 -root
xmodmap ~/.xmodmap
exec ion3
#exec ~/bin/startx
#exec ratoison
Je ne vois pas l'erreur (chez moi ça marche (sauf que je fais un -merge
avec les options par défaut))...
A ce propos, connaissez-vous quelque chose qui me permettrait de
choisir lors du startx parmi
-fullscreen
export SBCL_HOME=/usr/lib/sbcl
ssh-add
unclutter -idle 1 -jitter 2 -root
xmodmap ~/.xmodmap
exec ion3
#exec ~/bin/startx
#exec ratoison
Je ne vois pas l'erreur (chez moi ça marche (sauf que je fais un -merge
avec les options par défaut))...
En relisant le message
$ apt-cache search wm choose
choosewm - fake x-session-manager allowing the user to choose a wm
Cool ! Merci du tuyau.
Xavier
--
Lisez la FAQ de la liste avant de poser une question :
http://wiki.debian.net/?DebianFrench
Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From
From: Sylvain Sauvage [EMAIL PROTECTED]
En relisant le message après son arrivée sur la liste, je vois que tu
mets « » pour xrdb et xmodmap, or :
1. cela ne sert pas car :
a) tous ces programmes terminent (ils ne tournent donc pas en arrière
plan pendant la session X)
If I log in via KDM or GDM, xine just shows a scrambled, frozen window
while playing a DVD (sound works).
But if I log in via startx, xine works fine.
This is true with different users. One user, I deleted the ~/.xine
directory, but that made no difference.
The only thing I see in xdpyinfo
Bonsoir,
Je ne sais pas si cela vient d'une mise à jour quelconque mais depuis
plusieurs jours, j'ai remarqué que mes fichiers de ressources
(Xresources et compagnie) n'étaient plus chargà lors du startx.
Y-aurait-il quelque chose de changé (que je n'aurais pas vu)? J'ai
vaguement cherchÃ
vendredi 09 juin 2006 à 23:42 +0200, Phil aka Philippe-Pierre a
écrit :
Denis Barbier a écrit :
une fois l'installation faite je tente la comande startx en user
et j'ai un message!
ci-joint le lien de la photo d'ecran un peu flou
http://vraconfr.free.fr/startx_no_permission.jpg
quelque
au mien
Le vendredi 09 juin 2006 à 23:42 +0200, Phil aka Philippe-Pierre a
écrit :
Denis Barbier a écrit :
une fois l'installation faite je tente la comande startx en user
et j'ai un message!
ci-joint le lien de la photo d'ecran un peu flou
http://vraconfr.free.fr
Vendredi 9 juin 2006, 23:43:47 CEST, pascal a écrit :
Phil aka Philippe-Pierre a écrit :
http://wiki.debian.org/Xorg69To7#head-befe1b676ecba9230025c3a18211c1c6dcfee9fc
Un lien très appréciable vu les posts de ces derniers jours...
Vais le lire cosnciencieusement avant d'upgrader
Dominique Fauqueux wrote:
As-tu essayé agnula ?
http://distrowatch.com/index.php?distribution=demudimonth=allyear=all
Ca me semble adapté pour l'usage que tu décris.
Pas encore, mais ça ne saurait tardé!
Amicalement,
Olivier
--
Lisez la FAQ de la liste avant de poser une question :
bonjour,
je suis passé en Etch sur un poste
j'ai fait l'instalation de base et apres
je passe à l'installation de xorg version 7.0 qui s'y trouve depuis peu.
installation de x11-common xbase-clients xserver-xorg
une fois l'installation faite je tente la comande startx en user
et j'ai un message
fois l'installation faite je tente la comande startx en user
et j'ai un message!
ci-joint le lien de la photo d'ecran un peu flou
http://vraconfr.free.fr/startx_no_permission.jpg
quelque chose aurait il changé dans Etch concernant xorg 7.0 ?
J'ai eu le problème la semaine dernière. J'ai cru à
l'installation faite je tente la comande startx en user
et j'ai un message!
ci-joint le lien de la photo d'ecran un peu flou
http://vraconfr.free.fr/startx_no_permission.jpg
quelque chose aurait il changé dans Etch concernant xorg 7.0 ?
Vers quoi pointe le lien /etc/X11/X ?
Denis
--
Lisez la
Denis Barbier a écrit :
une fois l'installation faite je tente la comande startx en user
et j'ai un message!
ci-joint le lien de la photo d'ecran un peu flou
http://vraconfr.free.fr/startx_no_permission.jpg
quelque chose aurait il changé dans Etch concernant xorg 7.0 ?
http://wiki.debian.org
Phil aka Philippe-Pierre a écrit :
http://wiki.debian.org/Xorg69To7#head-befe1b676ecba9230025c3a18211c1c6dcfee9fc
Un lien très appréciable vu les posts de ces derniers jours...
Vais le lire cosnciencieusement avant d'upgrader moa...
Merci
Pascal
--
Haut par-dessus leur tête voguaient les
Bizfriz a écrit :
Bonjour, lors de l'install Debian GNU/Linux, je suis arrivée jusqu'à
startx, mais là j'ai droit au message suivant : fatal error: no
screens found. Je suppose que le système ne reconnaît pas ma carte
graphique, ATI Mobiltity Radeon X700. Je ne sais comment contourner ce
401 - 500 of 1377 matches
Mail list logo
